Download or read book Materials and Manufacturing Capabilities for Sustaining Defense Systems written by National Research Council and published by National Academies Press. This book was released on 2013-04-29 with total page 87 pages. Available in PDF, EPUB and Kindle. Book excerpt: The Standing Committee on Defense Materials Manufacturing and Infrastructure (DMMI) conducted a workshop on July 23-24, 2012, to share information and gather perspectives on issues concerning Materials and Manufacturing Capabilities for Sustaining Defense Systems. This workshop, held at the headquarters building of the National Academies, 2101 Constitution Avenue N.W., Washington D.C., was conducted according to the procedures of the National Research Council (NRC) for a convening activity. That is, all workshop participants-including presenters, members of the DMMI standing committee, Reliance 21, invited guests, and visitors-spoke as individuals, and no overall findings, conclusions, or recommendations were developed during or as a result of the workshop. All statements and views summarized in this publication are attributable only to those individuals who expressed them. It is worth noting that the sponsor, Reliance 21, is a Department of Defense group of professionals that was established to enable the DOD science and technology (S&T) community to work together to enhance Defense S&T programs, eliminate unwarranted duplication, and strengthen cooperation among the military services and other DOD agencies. The DMMI standing committee named a workshop planning group to develop the workshop agenda and decide on invited guests and presenters, in accordance with the statement of task approved by the Governing Board of the NRC. The planning group also consulted with the Reliance 21 materials and processing community of interest. The presentations and discussions during the workshop are summarized sequentially in the main part of this report. As an aid to readers, nine themes have been identified by the author that recurred in multiple presentations and discussions. Materials and Manufacturing Capabilities for Sustaining Defense Systems: Summary of a Workshop explains these nine themes and summarizes the two day workshop.
Download or read book Materials and Manufacturing Capabilities for Sustaining Defense Systems Summary of a Workshop written by Robert J. Katt and published by . This book was released on with total page pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Materials and Manufacturing Capabilities for Sustaining Defense Systems written by National Research Council and published by National Academies Press. This book was released on 2013-03-29 with total page 87 pages. Available in PDF, EPUB and Kindle. Book excerpt: The Standing Committee on Defense Materials Manufacturing and Infrastructure (DMMI) conducted a workshop on July 23-24, 2012, to share information and gather perspectives on issues concerning Materials and Manufacturing Capabilities for Sustaining Defense Systems. This workshop, held at the headquarters building of the National Academies, 2101 Constitution Avenue N.W., Washington D.C., was conducted according to the procedures of the National Research Council (NRC) for a convening activity. That is, all workshop participants-including presenters, members of the DMMI standing committee, Reliance 21, invited guests, and visitors-spoke as individuals, and no overall findings, conclusions, or recommendations were developed during or as a result of the workshop. All statements and views summarized in this publication are attributable only to those individuals who expressed them. It is worth noting that the sponsor, Reliance 21, is a Department of Defense group of professionals that was established to enable the DOD science and technology (S&T) community to work together to enhance Defense S&T programs, eliminate unwarranted duplication, and strengthen cooperation among the military services and other DOD agencies. The DMMI standing committee named a workshop planning group to develop the workshop agenda and decide on invited guests and presenters, in accordance with the statement of task approved by the Governing Board of the NRC. The planning group also consulted with the Reliance 21 materials and processing community of interest. The presentations and discussions during the workshop are summarized sequentially in the main part of this report. As an aid to readers, nine themes have been identified by the author that recurred in multiple presentations and discussions. Materials and Manufacturing Capabilities for Sustaining Defense Systems: Summary of a Workshop explains these nine themes and summarizes the two day workshop.
Download or read book Globalization of Defense Materials and Manufacturing written by National Academies of Sciences, Engineering, and Medicine and published by National Academies Press. This book was released on 2018-12-02 with total page 121 pages. Available in PDF, EPUB and Kindle. Book excerpt: Emerging economies, social and political transitions, and new ways of doing business are changing the world dramatically. To be the leader in this competitive climate, a defense manufacturing enterprise will require up-to-date capabilities, which include improvements in materials processing, among other things. Also, national and international efforts to mitigate environmentally harmful effects of industrial processes and to improve decision making for handling and disposing of industrial contaminants adds additional requirements for any future efforts. The objective of retaining high-value materials-related manufacturing as a key national competitive capability implies a number of factors. The value of specific manufacturing capabilities could be defined not only in terms of criticality to defense systems but also in relation to technology and knowledge content, importance as a supplier to other industries, and importance to U.S. exports. Requested by Department of Defense (DoD) communities, the National Academies of Sciences, Engineering, and Medicine held a workshop in March 2015 to further explore materials and manufacturing processes. The participants explored changes in the global R&D landscape, technology awareness mechanismsâ€"both DoD's mechanisms and other modelsâ€"and collaboration models and issues in R&D. This publication summarizes the presentations and discussions from the workshop.
Download or read book Globalization of Defense Materials and Manufacturing written by and published by . This book was released on 2018 with total page 110 pages. Available in PDF, EPUB and Kindle. Book excerpt: "Emerging economies, social and political transitions, and new ways of doing business are changing the world dramatically. To be the leader in this competitive climate, a defense manufacturing enterprise will require up-to-date capabilities, which include improvements in materials processing, among other things. Also, national and international efforts to mitigate environmentally harmful effects of industrial processes and to improve decision making for handling and disposing of industrial contaminants adds additional requirements for any future efforts. The objective of retaining high-value materials-related manufacturing as a key national competitive capability implies a number of factors. The value of specific manufacturing capabilities could be defined not only in terms of criticality to defense systems but also in relation to technology and knowledge content, importance as a supplier to other industries, and importance to U.S. exports. Requested by Department of Defense (DoD) communities, the National Academies of Sciences, Engineering, and Medicine held a workshop in March 2015 to further explore materials and manufacturing processes. The participants explored changes in the global R&D landscape, technology awareness mechanisms—both DoD’s mechanisms and other models—and collaboration models and issues in R&D. This publication summarizes the presentations and discussions from the workshop"--Publisher's description
Download or read book Defense Manufacturing in 2010 and Beyond written by National Research Council and published by National Academies Press. This book was released on 1999-02-25 with total page 228 pages. Available in PDF, EPUB and Kindle. Book excerpt: The end of the Cold War, the evolving mission of the U.S. Armed Services, the dramatic improvements in commercial manufacturingâ€"these and other trends are changing how we provide for the common defense. What will we need in the way of defense manufacturing in the year 2010â€"a short few years away? How should we best spend our defense funds? Defense Manufacturing in 2010 and Beyond sets forth a vision for the nation's defense manufacturing, including policies, technologies, systems, processes, practices, and financial implications. Eight specific trends are forecastâ€"defense spending, the relationship between defense and commerical industries, the nature of the threat to our nation, the emergence of new technologies, and other areasâ€"and their implications for defense manufacturing are explored. The committee describes manufacturing advancements that are around the cornerâ€"virtual enterprise, and moreâ€"and examines how these breakthroughs will likely meet or fail to meet defense manufacturing requirements. This expert panel identifies the highest priorities and recommends strategies for matching future manufacturing capabilities with our defense needs. February
Download or read book Manufacturing Technology written by Commis Committee on the Role of the Manufacturing Technology Progra and published by National Academies Press. This book was released on 1987-01-01 with total page 48 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book 21st Century Paradigm Change in Performance and Design Metrics written by National Academies of Sciences, Engineering, and Medicine and published by National Academies Press. This book was released on 2019-08-15 with total page 89 pages. Available in PDF, EPUB and Kindle. Book excerpt: In September 2015, the National Academies of Sciences, Engineering, and Medicine convened a two-day workshop on evolving paradigms for design and manufacturing. Participants discussed ways to lower costs and shorten production time in defense systems while bringing materials and manufacturing alternatives into the tradespace. This publication summarizes the presentations and discussions from the workshop.
Download or read book Strategic Long Term Participation by DoD in Its Manufacturing USA Institutes written by National Academies of Sciences, Engineering, and Medicine and published by National Academies Press. This book was released on 2019-07-01 with total page 103 pages. Available in PDF, EPUB and Kindle. Book excerpt: The U.S. Department of Defense (DoD) Manufacturing USA Institutes aim to protect national security and increase U.S. competitiveness in manufacturing. The domestic industrial base is critical to supporting and sustaining both military advantage and economic competitiveness. Through these institutes, the DoD is committed to domestically designing and manufacturing the most innovative defense systems. Intended as intensely collaborative applied research and development endeavors among government, industry, and academia, the institutes are envisioned to become lasting, self-sustaining national assets. A long-term strategy is needed to achieve this goal. The National Academies of Sciences, Engineering, and Medicine recently convened a workshop to discuss the long-term sustainability of the Manufacturing USA Institutes. Participants explored different perspectives across multiple disciplines, discussed public-private partnership models, and considered international programs in advanced manufacturing to inform their recommendations regarding the future of the institutes. This publication summarizes the presentations and discussions from the workshop.
Download or read book Breaking the Mold written by National Research Council and published by National Academies Press. This book was released on 1993-02-01 with total page 97 pages. Available in PDF, EPUB and Kindle. Book excerpt: Given the dramatic changes in the environment for national defense, concurrent with rapid improvements in commercial manufacturing capabilities, the Department of Defense (DOD) requires a new approach to designing, engineering, manufacturing, buying, and upgrading weapon systems. This book provides both a vision for that new approach and a strategy by which the DOD can accomplish the necessary changes. The result will be a higher quality, more cost-effective weapon systems and a stronger industrial base while still accommodating diminishing procurement budgets.
Download or read book Accelerating Technology Transition written by National Research Council and published by National Academies Press. This book was released on 2004-11-15 with total page 68 pages. Available in PDF, EPUB and Kindle. Book excerpt: Accelerating the transition of new technologies into systems and products will be crucial to the Department of Defenses development of a lighter, more flexible fighting force. Current long transition times-ten years or more is now typical-are attributed to the complexity of the process. To help meet these challenges, the Department of Defense asked the National Research Council to examine lessons learned from rapid technology applications by integrated design and manufacturing groups. This report presents the results of that study, which was based on a workshop held to explore these successful cases. Three key areas emerged: creating a culture for innovation and rapid technology transition; methodologies and approaches; and enabling tools and databases.
Download or read book Managing Materials for a Twenty first Century Military written by National Research Council and published by National Academies Press. This book was released on 2008-03-26 with total page 206 pages. Available in PDF, EPUB and Kindle. Book excerpt: Since 1939, the U.S. government, using the National Defense Stockpile (NDS), has been stockpiling critical strategic materials for national defense. The economic and national security environments, however, have changed significantly from the time the NDS was created. Current threats are more varied, production and processing of key materials is more globally dispersed, the global competition for raw materials is increasing, the U.S. military is more dependent on civilian industry, and industry depends far more on just-in-time inventory control. To help determine the significance of these changes for the strategic materials stockpile, the Department of Defense asked the NRC to assess the continuing need for and value of the NDS. This report begins with the historical context of the NDS. It then presents a discussion of raw-materials and minerals supply, an examination of changing defense planning and materials needs, an analysis of modern tools used to manage materials supply chains, and an assessment of current operational practices of the NDS.
Download or read book Strategic Long term Participation by DOD in Its Manufacturing USA Institutes written by National Materials and Manufacturing Board and published by . This book was released on 2019 with total page 91 pages. Available in PDF, EPUB and Kindle. Book excerpt: "The U.S. Department of Defense (DoD) Manufacturing USA Institutes aim to protect national security and increase U.S. competitiveness in manufacturing. The domestic industrial base is critical to supporting and sustaining both military advantage and economic competitiveness. Through these institutes, the DoD is committed to domestically designing and manufacturing the most innovative defense systems. Intended as intensely collaborative applied research and development endeavors among government, industry, and academia, the institutes are envisioned to become lasting, self-sustaining national assets. A long-term strategy is needed to achieve this goal. The National Academies of Sciences, Engineering, and Medicine recently convened a workshop to discuss the long-term sustainability of the Manufacturing USA Institutes. Participants explored different perspectives across multiple disciplines, discussed public-private partnership models, and considered international programs in advanced manufacturing to inform their recommendations regarding the future of the institutes. This publication summarizes the presentations and discussions from the workshop"--Publisher's description
Download or read book Logistics and Manufacturing Under Attack Future Pathways Proceedings of a Workshop written by National Academies Of Sciences Engineeri and published by National Academies Press. This book was released on 2023-01-21 with total page 0 pages. Available in PDF, EPUB and Kindle. Book excerpt: The ability to deploy and maintain infrastructure and equipment is crucial to military operations and national security. However, the ability to make and repair equipment in a wide range of operational environments is increasingly vulnerable to disruptions in global supply chains and to attacks. Emerging technologies and innovations offer exciting new opportunities to create structures remotely using a broad range of materials, as well as new capabilities for repair and operational support to sustain assets in the long term. To examine these issues and reveal areas of opportunity for military applications and the U.S. Department of Defense, the National Academies of Sciences, Engineering, and Medicine hosted the Workshop on Logistics and Manufacturing Under Attack on June 2-4, 2021. The virtual event brought together speakers and attendees representing materials science, engineering, logistics, and manufacturing experts from industry, academia, and government agencies. The event was organized around three main topics: additive manufacturing of large structures, critical systems supply and repair, and supply and manufacturing in space. This publication summarizes the presentations and discussion of the workshop.
Download or read book Materials Research to Meet 21st Century Defense Needs written by National Research Council and published by National Academies Press. This book was released on 2003-03-25 with total page 660 pages. Available in PDF, EPUB and Kindle. Book excerpt: In order to achieve the revolutionary new defense capabilities offered by materials science and engineering, innovative management to reduce the risks associated with translating research results will be needed along with the R&D. While payoff is expected to be high from the promising areas of materials research, many of the benefits are likely to be evolutionary. Nevertheless, failure to invest in more speculative areas of research could lead to undesired technological surprises. Basic research in physics, chemistry, biology, and materials science will provide the seeds for potentially revolutionary technologies later in the 21st century.
Download or read book Retooling Manufacturing written by National Research Council and published by National Academies Press. This book was released on 2004-09-30 with total page 123 pages. Available in PDF, EPUB and Kindle. Book excerpt: As the Department of Defense continues development of the future warrior system, the difficulty of moving rapidly from design to manufacturing for complex technologies is becoming a major concern. In particular, there are communication gaps between design and manufacturing that hinder rapid development of new products important for these future military developments. To help address those concerns, DOD asked the NRC to develop a framework for "bridging" these gaps through data management, modeling, and simulation. This report presents the results of this study. It provides a framework for virtual design and manufacturing and an assessment of the necessary tools; an analysis of the economic dimensions; an examination of barriers to virtual design and manufacturing in the DOD acquisition process; and a series of recommendations and research needs.
Download or read book Department of the Interior and Related Agencies Appropriations for 1996 Justification of the budget estimates Office of the Secretary written by United States. Congress. House. Committee on Appropriations. Subcommittee on Department of the Interior and Related Agencies and published by . This book was released on 1995 with total page 1358 pages. Available in PDF, EPUB and Kindle. Book excerpt:
