Download or read book Materials and Device Characterization in Micromachining written by and published by . This book was released on 1999 with total page 274 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Femtosecond Laser Micromachining written by Roberto Osellame and published by Springer Science & Business Media. This book was released on 2012-03-05 with total page 485 pages. Available in PDF, EPUB and Kindle. Book excerpt: Femtosecond laser micromachining of transparent material is a powerful and versatile technology. In fact, it can be applied to several materials. It is a maskless technology that allows rapid device prototyping, has intrinsic three-dimensional capabilities and can produce both photonic and microfluidic devices. For these reasons it is ideally suited for the fabrication of complex microsystems with unprecedented functionalities. The book is mainly focused on micromachining of transparent materials which, due to the nonlinear absorption mechanism of ultrashort pulses, allows unique three-dimensional capabilities and can be exploited for the fabrication of complex microsystems with unprecedented functionalities.This book presents an overview of the state of the art of this rapidly emerging topic with contributions from leading experts in the field, ranging from principles of nonlinear material modification to fabrication techniques and applications to photonics and optofluidics.
Download or read book Micro and Nano Mechanical Testing of Materials and Devices written by Fuqian Yang and published by Springer Science & Business Media. This book was released on 2009-02-28 with total page 390 pages. Available in PDF, EPUB and Kindle. Book excerpt: Nanoscale and nanostructured materials have exhibited different physical properties from the corresponding macroscopic coarse-grained materials due to the size confinement. As a result, there is a need for new techniques to probe the mechanical behavior of advanced materials on the small scales. Micro and Nano Mechanical Testing of Materials and Devices presents the latest advances in the techniques of mechanical testing on the micro- and nanoscales, which are necessary for characterizing the mechanical properties of low-dimensional materials and structures. Written by a group of internationally recognized authors, this book covers topics such as: Techniques for micro- and nano- mechanical characterization; Size effects in the indentation plasticity; Characterization of low-dimensional structure including nanobelts and nanotubes; Characterization of smart materials, including piezoelectric materials and shape memory alloys; Analysis and modeling of the deformation of carbon-nanotubes. Micro and Nano Mechanical Testing of Materials and Devices is a valuable resource for engineers and researchers working in the area of mechanical characterization of advanced materials.
Download or read book The MEMS Handbook written by Mohamed Gad-el-Hak and published by CRC Press. This book was released on 2001-09-27 with total page 1386 pages. Available in PDF, EPUB and Kindle. Book excerpt: The revolution is well underway. Our understanding and utilization of microelectromechanical systems (MEMS) are growing at an explosive rate with a worldwide market approaching billions of dollars. In time, microdevices will fill the niches of our lives as pervasively as electronics do right now. But if these miniature devices are to fulfill their mammoth potential, today's engineers need a thorough grounding in the underlying physics, modeling techniques, fabrication methods, and materials of MEMS. The MEMS Handbook delivers all of this and more. Its team of authors-unsurpassed in their experience and standing in the scientific community- explore various aspects of MEMS: their design, fabrication, and applications as well as the physical modeling of their operations. Designed for maximum readability without compromising rigor, it provides a current and essential overview of this fledgling discipline.
Download or read book MEMS written by Mohamed Gad-el-Hak and published by CRC Press. This book was released on 2005-11-29 with total page 678 pages. Available in PDF, EPUB and Kindle. Book excerpt: Thoroughly revised and updated, the new edition of the best-selling MEMS Handbook is now presented as a three-volume set that offers state-of-the-art coverage of microelectromechanical systems. Through chapters contributed by top experts and pioneers in the field, MEMS: Design and Fabrication presents a comprehensive look at the materials, procedures, tools, and techniques of MEMS fabrication. New chapters in this edition examine the materials and fabrication of polymer microsystems and optical diagnostics for investigating the entrance length in microchannels. Rigorous yet accessible, this volume provides the practical knowledge needed for work in cutting-edge MEMS applications.
Download or read book Handbook of Silicon Based MEMS Materials and Technologies written by Markku Tilli and published by Elsevier. This book was released on 2009-12-08 with total page 670 pages. Available in PDF, EPUB and Kindle. Book excerpt: A comprehensive guide to MEMS materials, technologies and manufacturing, examining the state of the art with a particular emphasis on current and future applications. Key topics covered include: - Silicon as MEMS material - Material properties and measurement techniques - Analytical methods used in materials characterization - Modeling in MEMS - Measuring MEMS - Micromachining technologies in MEMS - Encapsulation of MEMS components - Emerging process technologies, including ALD and porous silicon Written by 73 world class MEMS contributors from around the globe, this volume covers materials selection as well as the most important process steps in bulk micromachining, fulfilling the needs of device design engineers and process or development engineers working in manufacturing processes. It also provides a comprehensive reference for the industrial R&D and academic communities. - Veikko Lindroos is Professor of Physical Metallurgy and Materials Science at Helsinki University of Technology, Finland. - Markku Tilli is Senior Vice President of Research at Okmetic, Vantaa, Finland. - Ari Lehto is Professor of Silicon Technology at Helsinki University of Technology, Finland. - Teruaki Motooka is Professor at the Department of Materials Science and Engineering, Kyushu University, Japan. - Provides vital packaging technologies and process knowledge for silicon direct bonding, anodic bonding, glass frit bonding, and related techniques - Shows how to protect devices from the environment and decrease package size for dramatic reduction of packaging costs - Discusses properties, preparation, and growth of silicon crystals and wafers - Explains the many properties (mechanical, electrostatic, optical, etc), manufacturing, processing, measuring (incl. focused beam techniques), and multiscale modeling methods of MEMS structures
Download or read book Microelectromechanical Systems and Devices written by Nazmul Islam and published by BoD – Books on Demand. This book was released on 2012-03-28 with total page 496 pages. Available in PDF, EPUB and Kindle. Book excerpt: The advances of microelectromechanical systems (MEMS) and devices have been instrumental in the demonstration of new devices and applications, and even in the creation of new fields of research and development: bioMEMS, actuators, microfluidic devices, RF and optical MEMS. Experience indicates a need for MEMS book covering these materials as well as the most important process steps in bulk micro-machining and modeling. We are very pleased to present this book that contains 18 chapters, written by the experts in the field of MEMS. These chapters are groups into four broad sections of BioMEMS Devices, MEMS characterization and micromachining, RF and Optical MEMS, and MEMS based Actuators. The book starts with the emerging field of bioMEMS, including MEMS coil for retinal prostheses, DNA extraction by micro/bio-fluidics devices and acoustic biosensors. MEMS characterization, micromachining, macromodels, RF and Optical MEMS switches are discussed in next sections. The book concludes with the emphasis on MEMS based actuators.
Download or read book Nanotribology written by Stephen M. Hsu and published by Springer Science & Business Media. This book was released on 2012-12-06 with total page 442 pages. Available in PDF, EPUB and Kindle. Book excerpt: Nanotribology: Critical Assessment and Research Needs is an excellent reference for both academic and industrial researchers working in the fields of nanotechnology, tribology, mechanical engineering, materials science and engineering, MEMS, NEMS, magnetic recording, and biomedical devices. It will also be of interest to those pursuing scanning probe microscopy, nanoimaging, mesomanufacturing, sensors, actuators, aerospace, defense (controllers, microsystems), and military systems. Nanotribology: Critical Assessment and Research Needs provides a critical assessment of the current state of the art of nanotribology within the context of MEMS, mesomanufacturing, nanotechnology and microsystems. It contains chapters written by the leading experts in these fields. It identifies gaps in current knowledge and barriers to applications, and recommends research areas that need to be addressed to enable the rapid development of technologies.
Download or read book Advanced Structural Materials written by Winston O. Soboyejo and published by CRC Press. This book was released on 2006-12-21 with total page 526 pages. Available in PDF, EPUB and Kindle. Book excerpt: A snapshot of the central ideas used to control fracture properties of engineered structural metallic materials, Advanced Structural Materials: Properties, Design Optimization, and Applications illustrates the critical role that advanced structural metallic materials play in aerospace, biomedical, automotive, sporting goods, and other indust
Download or read book Microelectronics Failure Analysis written by EDFAS Desk Reference Committee and published by ASM International. This book was released on 2011 with total page 673 pages. Available in PDF, EPUB and Kindle. Book excerpt: Includes bibliographical references and index.
Download or read book MEMS and Microstructures in Aerospace Applications written by Robert Osiander and published by CRC Press. This book was released on 2018-10-03 with total page 400 pages. Available in PDF, EPUB and Kindle. Book excerpt: The promise of MEMS for aerospace applications has been germinating for years, and current advances bring the field to the very cusp of fruition. Reliability is chief among the challenges limiting the deployment of MEMS technologies in space, as the requirement of zero failure during the mission is quite stringent for this burgeoning field. MEMS and Microstructures in Aerospace Applications provides all the necessary tools to overcome these obstacles and take MEMS from the lab bench to beyond the exosphere. The book begins with an overview of MEMS development and provides several demonstrations of past and current examples of MEMS in space. From this platform, the discussion builds to fabrication technologies; the effect of space environmental factors on MEMS devices; and micro technologies for space systems, instrumentation, communications, thermal control, guidance navigation and control, and propulsion. Subsequent chapters explore factors common to all of the described systems, such as MEMS packaging, handling and contamination control, material selection for specific applications, reliability practices for design and application, and assurance practices. Edited and contributed by an outstanding team of leading experts from industry, academia, and national laboratories, MEMS and Microstructures in Aerospace Applications illuminates the path toward qualifying and integrating MEMS devices and instruments into future space missions and developing innovative satellite systems.
Download or read book Modern Manufacturing Processes written by Muammer Koç and published by John Wiley & Sons. This book was released on 2019-09-04 with total page 549 pages. Available in PDF, EPUB and Kindle. Book excerpt: Provides an in-depth understanding of the fundamentals of a wide range of state-of-the-art materials manufacturing processes Modern manufacturing is at the core of industrial production from base materials to semi-finished goods and final products. Over the last decade, a variety of innovative methods have been developed that allow for manufacturing processes that are more versatile, less energy-consuming, and more environmentally friendly. This book provides readers with everything they need to know about the many manufacturing processes of today. Presented in three parts, Modern Manufacturing Processes starts by covering advanced manufacturing forming processes such as sheet forming, powder forming, and injection molding. The second part deals with thermal and energy-assisted manufacturing processes, including warm and hot hydrostamping. It also covers high speed forming (electromagnetic, electrohydraulic, and explosive forming). The third part reviews advanced material removal process like advanced grinding, electro-discharge machining, micro milling, and laser machining. It also looks at high speed and hard machining and examines advances in material modeling for manufacturing analysis and simulation. Offers a comprehensive overview of advanced materials manufacturing processes Provides practice-oriented information to help readers find the right manufacturing methods for the intended applications Highly relevant for material scientists and engineers in industry Modern Manufacturing Processes is an ideal book for practitioners and researchers in materials and mechanical engineering.
Download or read book Microelectromechanical Structures for Materials Research written by Stuart B. Brown and published by . This book was released on 1998 with total page 272 pages. Available in PDF, EPUB and Kindle. Book excerpt: Reports recent developments in a field that is coalescing but still lacks the coherence or certainty of a mature discipline in terms of accepted methodologies. The 39 papers discuss the resonance method as an attractive way to evaluate mechanical properties of thin gold films, heating effects on the Young's modulus of films sputtered onto micromachined resonators, test methods for characterizing piezoelectric thin films, polysilicon tensile testing with electrostatic gripping, silicon-based epitaxial films, and other aspects. Annotation copyrighted by Book News, Inc., Portland, OR
Download or read book Biological Micro and Nanotribology written by Matthias Scherge and published by Springer Science & Business Media. This book was released on 2013-11-11 with total page 307 pages. Available in PDF, EPUB and Kindle. Book excerpt: By employing a combination of approaches from several disciplines the authors elucidate the principles of a variety of biomechanical systems that rely on frictional surfaces or adhesive secretions to attach parts of the body to one another or to attach organisms to a substrate. This account provides an excellent starting point for engineers and physicists working with biological systems and for biologists studying friction and adhesion. It will also serve as a valuable introduction for graduate students entering this interdisciplinary field of research.
Download or read book Materials and Failures in MEMS and NEMS written by Atul Tiwari and published by John Wiley & Sons. This book was released on 2015-09-11 with total page 424 pages. Available in PDF, EPUB and Kindle. Book excerpt: The fabrication of MEMS has been predominately achieved by etching the polysilicon material. However, new materials are in large demands that could overcome the hurdles in fabrication or manufacturing process. Although, an enormous amount of work being accomplished in the area, most of the information is treated as confidential or privileged. It is extremely hard to find the meaningful information for the new or related developments. This book is collection of chapters written by experts in MEMS and NEMS technology. Chapters are contributed on the development of new MEMS and NEMS materials as well as on the properties of these devices. Important properties such as residual stresses and buckling behavior in the devices are discussed as separate chapters. Various models have been included in the chapters that studies the mode and mechanism of failure of the MEMS and NEMS. This book is meant for the graduate students, research scholars and engineers who are involved in the research and developments of advanced MEMS and NEMS for a wide variety of applications. Critical information has been included for the readers that will help them in gaining precise control over dimensional stability, quality, reliability, productivity and maintenance in MEMS and NEMS. No such book is available in the market that addresses the developments and failures in these advanced devices.
Download or read book Handbook of GaN Semiconductor Materials and Devices written by Wengang (Wayne) Bi and published by CRC Press. This book was released on 2017-10-20 with total page 709 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book addresses material growth, device fabrication, device application, and commercialization of energy-efficient white light-emitting diodes (LEDs), laser diodes, and power electronics devices. It begins with an overview on basics of semiconductor materials, physics, growth and characterization techniques, followed by detailed discussion of advantages, drawbacks, design issues, processing, applications, and key challenges for state of the art GaN-based devices. It includes state of the art material synthesis techniques with an overview on growth technologies for emerging bulk or free standing GaN and AlN substrates and their applications in electronics, detection, sensing, optoelectronics and photonics. Wengang (Wayne) Bi is Distinguished Chair Professor and Associate Dean in the College of Information and Electrical Engineering at Hebei University of Technology in Tianjin, China. Hao-chung (Henry) Kuo is Distinguished Professor and Associate Director of the Photonics Center at National Chiao-Tung University, Hsin-Tsu, Taiwan, China. Pei-Cheng Ku is an associate professor in the Department of Electrical Engineering & Computer Science at the University of Michigan, Ann Arbor, USA. Bo Shen is the Cheung Kong Professor at Peking University in China.
Download or read book MEMS Mechanical Sensors written by Stephen Beeby and published by Artech House. This book was released on 2004 with total page 282 pages. Available in PDF, EPUB and Kindle. Book excerpt: Annotation Engineers and researchers can turn to this reference time and time again when they need to overcome challenges in design, simulation, fabrication, and application of MEMS (microelectromechanical systems) sensors.
