Download or read book Materials and Contact Characterisation IX written by S. Hernández and published by WIT Press. This book was released on 2019-07-23 with total page 287 pages. Available in PDF, EPUB and Kindle. Book excerpt: Including papers from the 9th edition of the International Conference on Computational Methods and Experiments in Material and Contact Characterisation this volume presents the work of selected researchers on the subject. Material and contact characterisation is a rapidly advancing field and this volume contains the latest research. Of particular interest to industry and society is the knowledge of surface treatment and contact mechanics of these materials to determine the in-service behaviour of components subject to contact conditions. Modern society requires systems that operate at conditions that use resources effectively. In terms of components durability, the understanding of surface engineering wear frictional and lubrication dynamics has never been so important. Current research is focussed on modification technologies that can increase the surface durability of materials. The characteristics of the system reveal which surface engineering methods should be chosen and as a consequence it is essential to study the combination of surface treatment and contact mechanics. The accurate characterisation of the physical and chemical properties of materials requires the application of both experimental techniques and computer simulation methods in order to gain a correct analysis. A very wide range of materials, starting with metals through polymers and semiconductors to composites, necessitates a whole spectrum of characteristic experimental techniques and research methods. The papers in the book cover a number of topics, including: Computer methods and simulation; Experimental and measurement techniques; Mechanical characterisation and testing; Materials under extreme conditions; Polymers and plastics; Advances in composites; Micro and macro characterisation; Corrosion and erosion; Damage, fatigue and fracture; Recycled materials; Materials and energy; Surface problems and contact mechanics; Surface modification and treatments; Thick and thin coatings; Tribomechanics and wear mechanics; Biomechanical characterisation; Biomechanical applications and Case studies.
Download or read book Materials and Contact Characterisation VIII written by C.A. Brebbia and published by WIT Press. This book was released on 2017-09-20 with total page 421 pages. Available in PDF, EPUB and Kindle. Book excerpt: Material and contact characterisation is a rapidly advancing field that requires the application of a combination of numerical and experimental methods. Including papers from the International Conference on Computational Methods and Experiments in Material and Contact Characterisation this volume presents the latest research in the field.
Download or read book Surface Effects and Contact Mechanics IX written by J. T. M. de Hosson and published by WIT Press. This book was released on 2009 with total page 289 pages. Available in PDF, EPUB and Kindle. Book excerpt: Experiments, and discusses the following topics: Surface treatments; Thick coatings; Thin coatings; Surface problems in contact mechanics; Indentation and hardness; Fatigue; Numerical analysis; Applications and case studies." --Book Jacket.
Download or read book Computational Experimental Methods in Multiphase Complex Flow X written by S. Hernández and published by WIT Press. This book was released on 2019-07-23 with total page 251 pages. Available in PDF, EPUB and Kindle. Book excerpt: Composed of papers presented at the 10th conference on Multiphase flow this book presents the latest research on the subject. The research included in this volume focuses on using synergies between experimental and computational techniques to gain a better understanding of all classes of multiphase and complex flow.
Download or read book Materials Characterisation IV written by Andrea Alberto Mammoli and published by WIT Press. This book was released on 2009 with total page 465 pages. Available in PDF, EPUB and Kindle. Book excerpt: Until recently, engineering materials could be characterised successfully using relatively simple testing procedures. As materials technology advances, interest is growing in materials possessing complex meso-, micro- and nano-structures, which to a large extent determine their physical properties and behaviour. The purposes of materials modelling are many - optimisation, investigation of failure, simulation of production processes, to name a few. Modelling and characterisation are closely intertwined, increasingly so as the complexity of the material increases. Characterisation, in essence, is the connection between the abstract material model and the real-world behaviour of the material in question. Characterisation of complex materials therefore may require a combination of experimental techniques and computation. This book contains papers from the Fourth International Conference on Computational Methods and Experiments in Materials Characterisation which brought researchers who use computational methods, those who perform experiments, and of course those who do both, in all areas of materials characterisation, to discuss their recent results and ideas, in order to foster the multidisciplinary approach that has become necessary for the study of complex phenomena.
Download or read book Advanced Processing Properties and Applications of Starch and Other Bio based Polymers written by Faris M. Al-Oqla and published by Elsevier. This book was released on 2020-07-30 with total page 232 pages. Available in PDF, EPUB and Kindle. Book excerpt: Advanced Processing, Properties, and Applications of Starch and Other Bio-based Polymers presents the latest cutting-edge research into the processing and applications of bio-based polymers, for novel industrial applications across areas including biomedical and electronics. The book is divided into three sections, covering processing and manufacture, properties, and applications. Throughout the book, key aspects of sustainability are considered, including improved utilization of available natural resources, sustainable design possibilities, cleaner production processes, and waste management. Focuses on starch-based polymers, examining the latest advances in processing and applications with this valuable category of biopolymer Highlights industrial sustainability considerations at all steps of the process, including when sourcing materials, designing and producing products, and dealing with waste Supports the processing and development of starch and other bio-based polymers with enhanced functionality for advanced applications
Download or read book Materials Characterization written by Naryanaswami (Mohan) Ranganathan and published by Pan Stanford. This book was released on 2015-08-31 with total page 0 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book highlights methods of characterizing material properties at nano, micro, and macro levels. Chapter 1 addresses nanaoindentation techniques comprehensively. Chapter 2 concerns polymer surface properties using nanoindentation techniques. Chapter 3 deals with the wear properties of dental composites. Chapter 4 compares global and local properties of a lead free solder. Chapter 5 discusses methods of determining plastic zones at the crack tip. Fatigue resistance of a synthetic polymer under different loading conditions is dealt with in Chapter 6. Chapter 7 is a review of methods of measuring fatigue crack growth resistance. Chapter 8 treats bulk and surface properties of coated materials. Chapter 9 presents a method for determining elastic constants using a resonance technique. This book gives a comprehensive state-of-the-art treatment to nanoindentation techniques and applications (four chapters cover metals, polymers, and rubber—novel applications such as creep and impact tests results at micro/nano level are considered). In fact Chapter 1 is a thorough analysis of this technique, its possibilities, and future developments. There are two chapters regarding corrosion and abrasion resistance of metals and dental composites and three chapters treating fatigue—one on rubber that highlights a hitherto unknown mechanism in a chloroprene rubber. There is one chapter on a very precise technique for modulus measurements up to 1200 °C.
Download or read book Forming the Future written by Glenn Daehn and published by Springer Nature. This book was released on 2021-07-10 with total page 2890 pages. Available in PDF, EPUB and Kindle. Book excerpt: In this collection, scientists and engineers from across industry, academia, and government present their latest improvements and innovations in all aspects of metal forming science and technology, with the intent of facilitating linkages and collaborations among these groups. Chapters cover the breadth of metal forming topics, from fundamental science to industrial application.
Download or read book Materials Characterisation written by D.O. Northwood and published by WIT Press. This book was released on 2018-03-27 with total page 179 pages. Available in PDF, EPUB and Kindle. Book excerpt: Containing selected papers on Materials Characterisation this volume presents the latest research in the field. Material and contact characterisation is a rapidly advancing field that requires the application of a combination of numerical and experimental methods. Contributions come from both industry and research communities using computational methods and performing experiments. Demand for high quality production from both industry and consumers has led to rapid developments in materials science and engineering. Current research is focussed on modification technologies that can increase the surface durability of materials. The characteristics of the system reveal which surface engineering methods should be chosen and as a consequence it is essential to study the combination of surface treatment and contact mechanics. The accurate characterisation of the physical and chemical properties of materials requires the application of both experimental techniques and computer simulation methods in order to gain a correct analysis. A very wide range of materials, starting with metals through polymers and semiconductors to composites, necessitates a whole spectrum of characteristic experimental techniques and research methods. The papers in this book examine various combinations of techniques across various topics.
Download or read book Materials Characterization Techniques written by Sam Zhang and published by CRC Press. This book was released on 2009 with total page 384 pages. Available in PDF, EPUB and Kindle. Book excerpt: 1. Introduction -- 2. Contact Angle in Surface Analysis -- 3. X-ray Photoelectron Spectroscopy and Auger Electron Spectroscopy -- 4. Scanning Tunneling Microscopy and Atomic Force Microscopy -- 5. X-ray Diffraction -- 6. Transmission Electron Miscroscopy -- 7. Scanning Electron Microscopy -- 8. Chromatographic Methods -- 9. Infrared Spectroscopy and UV/Vis Spectroscopy -- 10. Macro and Micro Thermal Analyses -- 11. Laser Confocal Fluorescence Microscopy.
Download or read book Semiconductor Material and Device Characterization written by Dieter K. Schroder and published by John Wiley & Sons. This book was released on 2015-06-29 with total page 800 pages. Available in PDF, EPUB and Kindle. Book excerpt: This Third Edition updates a landmark text with the latest findings The Third Edition of the internationally lauded Semiconductor Material and Device Characterization brings the text fully up-to-date with the latest developments in the field and includes new pedagogical tools to assist readers. Not only does the Third Edition set forth all the latest measurement techniques, but it also examines new interpretations and new applications of existing techniques. Semiconductor Material and Device Characterization remains the sole text dedicated to characterization techniques for measuring semiconductor materials and devices. Coverage includes the full range of electrical and optical characterization methods, including the more specialized chemical and physical techniques. Readers familiar with the previous two editions will discover a thoroughly revised and updated Third Edition, including: Updated and revised figures and examples reflecting the most current data and information 260 new references offering access to the latest research and discussions in specialized topics New problems and review questions at the end of each chapter to test readers' understanding of the material In addition, readers will find fully updated and revised sections in each chapter. Plus, two new chapters have been added: Charge-Based and Probe Characterization introduces charge-based measurement and Kelvin probes. This chapter also examines probe-based measurements, including scanning capacitance, scanning Kelvin force, scanning spreading resistance, and ballistic electron emission microscopy. Reliability and Failure Analysis examines failure times and distribution functions, and discusses electromigration, hot carriers, gate oxide integrity, negative bias temperature instability, stress-induced leakage current, and electrostatic discharge. Written by an internationally recognized authority in the field, Semiconductor Material and Device Characterization remains essential reading for graduate students as well as for professionals working in the field of semiconductor devices and materials. An Instructor's Manual presenting detailed solutions to all the problems in the book is available from the Wiley editorial department.
Download or read book Advances in Machinery Materials Science and Engineering Application IX written by M. Chen and published by IOS Press. This book was released on 2023-11-14 with total page 1172 pages. Available in PDF, EPUB and Kindle. Book excerpt: New engineering materials, techniques and applications are constantly being researched and developed, and keeping up to speed with the latest advances is crucial for engineers if they are to successfully address the challenges they face in their work. This book presents the selected proceedings of MMSE2023, the 9th International Conference on Advances in Machinery, Materials Science and Engineering Applications, jointly organized by the SAE-Supmeca, France and China University of Geosciences (Wuhan) and held on 22 and 23 July 2023 in Wuhan, China. For the past 12 years, this annual conference has collated recent advances and experiences, identified emerging trends and provided a platform for participants from academia and industry to exchange information and views, helping to address the world’s machinery and engineering challenges. The book contains 4 sections: mechanical engineering, material science and manufacturing technology; electrical engineering, automation and control; modeling, simulation and optimization techniques in engineering; and advanced engineering technologies and applications. A total of 241 submissions were received for MMSE2023, of which 151 papers were selected for the conference and for publication by means of a rigorous international peer-review process. These papers present exciting ideas and methods that will open novel research directions for different communities. Offering a current overview of the latest research and applications in machinery and materials-science engineering, the book will be of interest to all those working in the field.
Download or read book Characterisation of Porous Solids VIII written by Nigel Seaton and published by Royal Society of Chemistry. This book was released on 2009-03-10 with total page 459 pages. Available in PDF, EPUB and Kindle. Book excerpt: This unique book is the Proceedings of the 8th International Symposium on the Characterisation of Porous Solids, known also as "COPS VIII". The conference is one of a series, held every three years, which covers developments in methods for the characterisation of porous materials, and applications of those methods. The scope of the conference: COPS VIII is concerned with fundamental and applied research on the characterisation of the structure of porous materials, and the relationship between structure and material performance. The scope includes experimental characterisation methods such as X-Ray diffraction, NMR, adsorption, mercury intrusion, and calorimetry; theoretical and simulation methods used to interpret experimental data, such as molecular simulation, classical and statistical mechanical theory, and pore network modelling; and applied research on the impact of measured material properties on performance in applications.
Download or read book Energy Production and Management in the 21st Century III written by S. Syngellakis and published by WIT Press. This book was released on 2019-01-29 with total page 177 pages. Available in PDF, EPUB and Kindle. Book excerpt: Containing papers from the 3rd International Conference on Energy Production and Management: The Quest for Sustainable Energy, this book discusses the future creation and use of energy resources. It also examines the issue of converting new sustainable sources of energy into useful forms, while finding efficient methods of storage and distribution. An important objective of the book is discussing ways in which more efficient use can be made of conventional as well as new energy sources. This relates to savings in energy consumption, reduction of energy losses, as well as the implementation of smart devices and the design of intelligent distribution networks. This volume provides a comparison of conventional energy sources, particularly hydrocarbons, with a number of other ways of producing energy, emphasising new technological developments, based on renewable resources such as solar, hydro, wind and geothermal. In many cases the challenges lie as much with production of such renewable energy at an acceptable cost, including damage to the environment, as with integration of those resources into the existing infrastructure. The changes required to progress from an economy based mainly on hydrocarbons to one taking advantage of sustainable energy resources are massive and require considerable scientific research as well as the development of advanced engineering systems. Such progress demands close collaboration between different disciplines in order to arrive at optimum solutions.
Download or read book Advances in Materials Processing IX written by Jun Wang and published by Trans Tech Publications Ltd. This book was released on 2010-06-02 with total page 778 pages. Available in PDF, EPUB and Kindle. Book excerpt: Materials processing is an important and essential step in the production of useful products, and is one of the major wealth-generating activities. With the increasing demand for the production of high precision, high integrity and high density devices and systems in modern life, materials processing has become more important than ever before. Following on from the previous eight publications in the series, Asia-Pacific Conference on Materials Processing, this volume presents the latest developments in this field, and a new understanding of the underlying mechanisms.
Download or read book Computer Aided Optimum Design in Engineering X written by S. Hernandez and published by WIT Press. This book was released on 2007 with total page 273 pages. Available in PDF, EPUB and Kindle. Book excerpt: Engineering design is enhanced by adding optimisation methods. Their influence cannot be over-emphasised. The resulting solutions provide an efficient way of dealing with some of the most difficult challenges in engineering practice today.Containing papers presented at the Tenth International Conference on this successful series on Optimum Design in Engineering, this book examines the recent development in advanced types of structures, particularly those based on new concepts and new types of materials resulting in optimum solutions. Particular emphasis is placed on computational methods to model, control and manage new structural solutions and material types. Featured topics include: Optimisation and Manufacturing; Structural Optimisation; Optimisation in Biomechanics; Shape and Topology Optimisation; Industrial examples of Design Optimisation; Fluid Structure Interaction; Damage and Fracture Mechanics; Composite Materials Optimisation; Optimum behavior of Fiber Reinforced Polymers; Aerospace Structures; Applications in Mechanical and car engineering; New Algorithms.
Download or read book Metals Handbook 9 ed 10 Materials Characterization written by American society for metals and published by . This book was released on 1986 with total page 761 pages. Available in PDF, EPUB and Kindle. Book excerpt:
