Download or read book Material Flow Systems in Manufacturing written by J.M. Tanchoco and published by Springer Science & Business Media. This book was released on 2012-12-06 with total page 405 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book contains a collection of contributions related to the design and control of material flow systems in manufacturing. Material flow systems in manufacturing covers a broad spectrum of topics directly affecting issues related to facilities design, material handling and production planning and control. In selecting the papers to include in this book, the scope was limited to the design and operational control aspects related to the physical move ment of parts, tools, containers and material handling devices. Recent develop ments in this area naturally led to concentration on flow systems involving cellular manufacturing, and automated transport equipment such as automated guided vehicles. However, the concepts discussed have general applicability to a wide range of manufacturing flow problems. The book is organized in five major sections: 1. design integration and justification; 2. cell design and material handling considerations; 3. alternative material flow paths; 4. operational control problems; and 5. tooling requirements and transport equipment.
Download or read book Planning Design and Analysis of Cellular Manufacturing Systems written by A.K. Kamrani and published by Newnes. This book was released on 1995-04-11 with total page 401 pages. Available in PDF, EPUB and Kindle. Book excerpt: Leading researchers in the field of cellular manufacturing systems from academia and industry have contributed to this volume. The book aims to report the latest developments and address the central issues in the design and implementation of cellular manufacturing systems. Cellular Manufacturing (CM) is one of the major concepts used in the design of flexible manufacturing systems. CM, also known as group production or family programming, can be described as a manufacturing technique that produces families of parts within a single line or cell of machines. The first part of the book describes various techniques for design and modeling of cellular manufacturing systems. The second part is concerned with performance measure and analysis, followed by a section which presents the applications of artifical intelligence and computer tools in cellular manufacturing systems.
Download or read book Handbook of Manufacturing and Supply Systems Design written by Bin Wu and published by CRC Press. This book was released on 2003-09-02 with total page 313 pages. Available in PDF, EPUB and Kindle. Book excerpt: Manufacturing Systems Management (MSM) is a functional domain that involves all of the activities for regulating and optimizing a manufacturing system as it progresses through its life cycle. These include the tasks of strategic analysis, design, implementation, operations and monitoring. Handbook of Manufacturing and Supply Systems Design: From Strategy Formulation to System Operation proposes a conceptual MSM framework based on some key principles of systems theory, which draws extensively on the relevant methodologies and techniques set out in the literature and on data gathered from industrial practice. This framework specifies the key functional areas of MSM, outlines the contents and relationships between them, and then logically integrates them in a closed-loop to allow the development of a set of consistent parameters and procedures. It enables an understanding of the problem domain, and provides guidance for the development of a set of consistent parameters and procedures. The handbook describes how a prototype of this framework has been used in the structuring and implementation of a computer-aided manufacturing system design environment. The application of certain key aspects of this framework within a number of industrial companies is also described. This sets the scene for a new generation of on-line manufacturing software systems, and should provide the knowledge to manage system design or re-design projects more effectively. Also included is a self-contained workbook, which provides a step-by-step guide through the complete cycle of manufacturing systems management, manufacturing systems design and manufacturing systems operation. Senior undergraduates and graduates students, as well as manufacturing engineers, should find this an up-to-date and thorough text.
Download or read book DeGarmo s Materials and Processes in Manufacturing written by J. T. Black and published by John Wiley & Sons. This book was released on 2011-08-30 with total page 1298 pages. Available in PDF, EPUB and Kindle. Book excerpt: Now in its eleventh edition, DeGarmo's Materials and Processes in Manufacturing has been a market-leading text on manufacturing and manufacturing processes courses for more than fifty years. Authors J T. Black and Ron Kohser have continued this book's long and distinguished tradition of exceedingly clear presentation and highly practical approach to materials and processes, presenting mathematical models and analytical equations only when they enhance the basic understanding of the material. Completely revised and updated to reflect all current practices, standards, and materials, the eleventh edition has new coverage of additive manufacturing, lean engineering, and processes related to ceramics, polymers, and plastics.
Download or read book Mechanical System Design written by Simant and published by PHI Learning Pvt. Ltd.. This book was released on 2009 with total page 269 pages. Available in PDF, EPUB and Kindle. Book excerpt: This textbook presents the concepts of engineering design process in proven steps of needs assessment, problem formulation, system modelling, analysis and implementation. It discusses in detail the concepts of system development, system modelling, system evaluation, system reliability, system simulation and presents the optimization techniques in a practical manner. The approach presented leads the students and practising engineers to understand and learn the design process and to develop the objective rationale for decision making in order to fulfil their professional role in society.
Download or read book Design of Work in Automated Manufacturing Systems written by T. Martin and published by Elsevier. This book was released on 2014-05-17 with total page 187 pages. Available in PDF, EPUB and Kindle. Book excerpt: Design of Work in Automated Manufacturing Systems focuses on the need to improve the working conditions in the workplace while at same time putting emphasis on the use of technologies in various industries. The book takes into account how automation has altered the operations of small- and medium-sized firms. The text then presents a comparison of the use of computer-controlled applications in different countries and industries, as well as how these applications have influenced the working conditions of workers as well as the division of work in the workplace. The changes that manufacturing industries have undergone and the adjustments that were made in adopting the use of automated manufacturing systems are also highlighted. Also noted are the changes that computer-aided production systems have done on engineering, including the observation that workers can effectively work in an environment that is partially controlled by computer-controlled applications. However, the text also notes that organizational problems have evolved in firms that have adopted computer-controlled applications. The book can be a source of information for social scientists and those involved in developing computer-controlled applications in organizations.
Download or read book Materials Design and Manufacturing for Sustainable Environment written by Santhakumar Mohan and published by Springer Nature. This book was released on 2021-02-06 with total page 909 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book comprises the select proceedings of the International Conference on Materials, Design and Manufacturing for Sustainable Environment (ICMDMSE 2020). The primary focus is on emerging materials and cutting-edge manufacturing technologies for sustainable environment. The book covers a wide range of topics such as advanced materials, vibration, tribology, finite element method (FEM), heat transfer, fluid mechanics, energy engineering, additive manufacturing, robotics and automation, automobile engineering, industry 4.0, MEMS and nanotechnology, optimization techniques, condition monitoring, and new paradigms in technology management. Contents of this book will be useful to students, researchers, and practitioners alike.
Download or read book Handbook of Stochastic Models and Analysis of Manufacturing System Operations written by J. MacGregor Smith and published by Springer Science & Business Media. This book was released on 2013-05-17 with total page 397 pages. Available in PDF, EPUB and Kindle. Book excerpt: This handbook surveys important stochastic problems and models in manufacturing system operations and their stochastic analysis. Using analytical models to design and control manufacturing systems and their operations entail critical stochastic performance analysis as well as integrated optimization models of these systems. Topics deal with the areas of facilities planning, transportation, and material handling systems, logistics and supply chain management, and integrated productivity and quality models covering: • Stochastic modeling and analysis of manufacturing systems • Design, analysis, and optimization of manufacturing systems • Facilities planning, transportation, and material handling systems analysis • Production planning, scheduling systems, management, and control • Analytical approaches to logistics and supply chain management • Integrated productivity and quality models, and their analysis • Literature surveys of issues relevant in manufacturing systems • Case studies of manufacturing system operations and analysis Today’s manufacturing system operations are becoming increasingly complex. Advanced knowledge of best practices for treating these problems is not always well known. The purpose of the book is to create a foundation for the development of stochastic models and their analysis in manufacturing system operations. Given the handbook nature of the volume, introducing basic principles, concepts, and algorithms for treating these problems and their solutions is the main intent of this handbook. Readers unfamiliar with these research areas will be able to find a research foundation for studying these problems and systems.
Download or read book Design and Analysis of Integrated Manufacturing Systems written by W. Dale Compton and published by National Academies Press. This book was released on 1988-02-01 with total page 248 pages. Available in PDF, EPUB and Kindle. Book excerpt: Design and Analysis of Integrated Manufacturing Systems is a fresh look at manufacturing from a systems point of view. This collection of papers from a symposium sponsored by the National Academy of Engineering explores the need for new technologies, the more effective use of new tools of analysis, and the improved integration of all elements of manufacturing operations, including machines, information, and humans. It is one of the few volumes to include detailed proposals for research that match the needs of industry.
Download or read book Logistics Systems Design and Optimization written by Andre Langevin and published by Springer Science & Business Media. This book was released on 2005-03-25 with total page 416 pages. Available in PDF, EPUB and Kindle. Book excerpt: In a context of global competition, the optimization of logistics systems is inescapable. Logistics Systems: Design and Optimization falls within this perspective and presents twelve chapters that well illustrate the variety and the complexity of logistics activities. Each chapter is written by recognized researchers who have been commissioned to survey a specific topic or emerging area of logistics. The first chapter, by Riopel, Langevin, and Campbell, develops a framework for the entire book. It classifies logistics decisions and highlights the relevant linkages to logistics decisions. The intricacy of these linkages demonstrates how thoroughly the decisions are interrelated and underscores the complexity of managing logistics activities. Each of the chapters focus on quantitative methods for the design and optimization of logistics systems.
Download or read book Control and Dynamic Systems V46 Manufacturing and Automation Systems Techniques and Technologies written by C.T. Leonides and published by Academic Press. This book was released on 2012-12-02 with total page 436 pages. Available in PDF, EPUB and Kindle. Book excerpt: Control and Dynamic Systems: Advances in Theory and Applications, Volume 46: Manufacturing and Automation Systems: Techniques and Technologies, Part 2 of 5 covers the significant advances and issues on the utilization of techniques and technologies in the manufacturing industries. This volume is divided into nine chapters and starts with the essential issue of software in manufacturing systems, particularly the aspects of the control software that are active in the time-critical or real time portions of the machine's operation. The succeeding chapters deal with the interactions between material-handling systems and other components of manufacturing systems; the principles of flexible manufacturing systems; the various views on the contributions of mechatronics; and the techniques for machine layout optimization in manufacturing and automation systems. These topics are followed by discussions of the application of a real-time control system to address issues of safety, productivity advances, and production cost reductions. Other chapters consider the influence of human supervisory control of predominantly automated manufacturing processes and the techniques for the manufacturing systems integration. The final chapter examines the major importance of the assembly line balancing to manufacturing systems. This book is of great value to process and mechanical engineers, as well as process control workers and researchers.
Download or read book Assembly Line Design written by We-Min Chow and published by CRC Press. This book was released on 2020-12-18 with total page 456 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book attempts to treat line design and its related subjects in a cohesive manner, with an emphasis on design applications. It discusses general guidelines for setting up assumptions and determining line performance parameters, based on empirical data from literature reports.
Download or read book Engineer in Training written by Dilip K. Das and published by Dearborn Trade Publishing. This book was released on 2004 with total page 220 pages. Available in PDF, EPUB and Kindle. Book excerpt: Annotation The PM exam for the FE is discipline specific. Engineer in Training: Chemical Review 2nd Ed. prepares chemical engineers for this portion of the exam. Students will want to buy Fundamentals of Engineering: Examination Review for the AM portion of the exam.
Download or read book Mechanical System Design written by Anup Goel and published by Technical Publications. This book was released on 2020-12-01 with total page 454 pages. Available in PDF, EPUB and Kindle. Book excerpt: In machine design or design of machine elements we study about the design of individual components of machinery like shafts, keys, belts, bolts, gears, etc. In mechanical system design we means that how these components are going to work in collaboration, reliability of the system when different components work together. This book includes design of conveyors for material handling systems (belt conveyors), design of multispeed gearbox for machine tools, design of I.C. engine components and optimum design. It also includes the design of pressure vessels used in mechanical systems. This book provides a systematic exposition of the basic concepts and techniques involved in design of mechanical systems. Our hope is that this book, through its careful explanations of concepts, practical examples and figures bridges the gap between knowledge and proper application of that knowledge.
Download or read book Design of Work and Development of Personnel in Advanced Manufacturing written by Gavriel Salvendy and published by John Wiley & Sons. This book was released on 1994-03-31 with total page 600 pages. Available in PDF, EPUB and Kindle. Book excerpt: Presents a framework of worldwide problems, issues and solutions relevant to the design of work and development of personnel in advanced manufacturing systems. Focuses on people and their central roles in automated production resulting from rapid computer-based integration. Addresses social, technical, organizational, managerial and ecological design issues relating to manufacturing success and the business objectives of a firm. Provides solutions to problems of integrating the human element into the production process.
Download or read book Smart Industry Better Management written by Tanya Bondarouk and published by Emerald Group Publishing. This book was released on 2022-07-18 with total page 163 pages. Available in PDF, EPUB and Kindle. Book excerpt: The ebook edition of this title is Open Access and freely available to read online. Smart Industry, Better Management explores concepts in future-proofing industrial and product systems, use of cyber physical systems, digitization, interconnectivity, and new manufacturing and product technologies.
Download or read book Congressional Budget Request written by United States. Department of Energy and published by . This book was released on 1982 with total page 376 pages. Available in PDF, EPUB and Kindle. Book excerpt:
