Download or read book MATERIAL SELECTION AND CORROSION Volume II written by and published by . This book was released on 2010-12-15 with total page 372 pages. Available in PDF, EPUB and Kindle. Book excerpt: These volumes are a component of Encyclopedia of Water Sciences, Engineering and Technology Resources in the global Encyclopedia of Life Support Systems (EOLSS), which is an integrated compendium of twenty one Encyclopedias. The books are concerned with the development and selection of the best possible material for a particular engineering task and the determination of the most effective method of producing the materials and the component. The complexity of modern processing and the need for efficient production and use of materials are discussed and illustrated by examples from current practice. Properties are determined by structure, which in turn depends on the processing route. Theses volumes are aimed at the following five major target audiences: University and College Students Educators, Professional Practitioners, Research Personnel and Policy and Decision Makers.

Download or read book Corrosion and Materials Selection written by Alireza Bahadori and published by John Wiley & Sons. This book was released on 2014-08-11 with total page 580 pages. Available in PDF, EPUB and Kindle. Book excerpt: The petroleum and chemical industries contain a wide variety of corrosive environments, many of which are unique to these industries. Oil and gas production operations consume a tremendous amount of iron and steel pipe, tubing, pumps, valves, and sucker rods. Metallic corrosion is costly. However, the cost of corrosion is not just financial. Beyond the huge direct outlay of funds to repair or replace corroded structures are the indirect costs – natural resources, potential hazards, and lost opportunity. Wasting natural resources is a direct contradiction to the growing need for sustainable development. By selecting the correct material and applying proper corrosion protection methods, these costs can be reduced, or even eliminated. This book provides a minimum design requirement for consideration when designing systems in order to prevent or control corrosion damage safely and economically, and addresses: • Corrosion problems in petroleum and chemical industries • Requirements for corrosion control • Chemical control of corrosive environments • Corrosion inhibitors in refineries and petrochemical plants • Materials selection and service life of materials • Surface preparation, protection and maintainability • Corrosion monitoring - plant inspection techniques and laboratory corrosion testing techniques Intended for engineers and industry personnel working in the petroleum and chemical industries, this book is also a valuable resource for research and development teams, safety engineers, corrosion specialists and researchers in chemical engineering, engineering and materials science.

Download or read book Materials Selection for Corrosion Control written by Sohan L. Chawla and published by ASM International. This book was released on 1993-01-01 with total page 523 pages. Available in PDF, EPUB and Kindle. Book excerpt: Provides a methodology for integrating materials selection with the design process, including simultaneous technical and economic evaluation. Save hours of frustrating research time: Get fast answers about the best material for a particular application. In the past, researching the endless sources on corrosion and materials in their countless applications were next to impossible. That's why this book was written: to help simplify your materials selection problems. It's an exhaustive source on the different corrosion-resistant materials, types of corrosion, factors affecting corrosion, passivation, corrosion monitoring, corrosion control measures, methodology of materials selection, and more.

Download or read book MATERIAL SELECTION AND CORROSION Volume I written by and published by . This book was released on 2010-12-15 with total page 344 pages. Available in PDF, EPUB and Kindle. Book excerpt: These volumes are a component of Encyclopedia of Water Sciences, Engineering and Technology Resources in the global Encyclopedia of Life Support Systems (EOLSS), which is an integrated compendium of twenty one Encyclopedias. The books are concerned with the development and selection of the best possible material for a particular engineering task and the determination of the most effective method of producing the materials and the component. The complexity of modern processing and the need for efficient production and use of materials are discussed and illustrated by examples from current practice. Properties are determined by structure, which in turn depends on the processing route. Theses volumes are aimed at the following five major target audiences: University and College Students Educators, Professional Practitioners, Research Personnel and Policy and Decision Makers.

Download or read book Materials Selection for Hydrocarbon and Chemical Plants written by Hansen and published by Routledge. This book was released on 2017-11-22 with total page 440 pages. Available in PDF, EPUB and Kindle. Book excerpt: Describes the systematic procedure for using process and mechanical design information to select construction materials suitable for a range of chemical and hydrocarbon processing plants. The volume features tables for locating the American Society for Testing and Materials (ASTM) product form specifications for construction materials that have code-allowable design stresses. It analyzes threshold values for degradation phenomena involving thermal damage.

Download or read book Corrosion and Materials in the Oil and Gas Industries written by Reza Javaherdashti and published by CRC Press. This book was released on 2016-04-19 with total page 715 pages. Available in PDF, EPUB and Kindle. Book excerpt: The advancement of methods and technologies in the oil and gas industries calls for new insight into the corrosion problems these industries face daily. With the application of more precise instruments and laboratory techniques as well as the development of new scientific paradigms, corrosion professionals are also witnessing a new era in the way d

Download or read book Principles of Corrosion Engineering and Corrosion Control written by Zaki Ahmad and published by Elsevier. This book was released on 2006-09-18 with total page 673 pages. Available in PDF, EPUB and Kindle. Book excerpt: Corrosion is a huge issue for materials, mechanical, civil and petrochemical engineers. With comprehensive coverage of the principles of corrosion engineering, this book is a one-stop text and reference for students and practicing corrosion engineers. Highly illustrated, with worked examples and definitions, it covers basic corrosion principles, and more advanced information for postgraduate students and professionals. Basic principles of electrochemistry and chemical thermodynamics are incorporated to make the book accessible for students and engineers who do not have prior knowledge of this area. Each form of corrosion covered in the book has a definition, description, mechanism, examples and preventative methods. Case histories of failure are cited for each form. End of chapter questions are accompanied by an online solutions manual. * Comprehensively covers the principles of corrosion engineering, methods of corrosion protection and corrosion processes and control in selected engineering environments* Structured for corrosion science and engineering classes at senior undergraduate and graduate level, and is an ideal reference that readers will want to use in their professional work* Worked examples, extensive end of chapter exercises and accompanying online solutions and written by an expert from a key pretochemical university

Download or read book Applied Metallurgy and Corrosion Control written by Amiya Kumar Lahiri and published by Springer. This book was released on 2017-08-23 with total page 544 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book serves as a comprehensive resource on metals and materials selection for the petrochemical industrial sector. The petrochemical industry involves large scale investments, and to maintain profitability the plants are to be operated with minimum downtime and failure of equipment, which can also cause safety hazards. To achieve this objective proper selection of materials, corrosion control, and good engineering practices must be followed in both the design and the operation of plants. Engineers and professional of different disciplines involved in these activities are required to have some basic understanding of metallurgy and corrosion. This book is written with the objective of servings as a one-stop shop for these engineering professionals. The book first covers different metallic materials and their properties, metal forming processes, welding, and corrosion and corrosion control measures. This is followed by considerations in material selection and corrosion control in three major industrial sectors, oil & gas production, oil refinery, and fertilizers. The importance of pressure vessel codes as well as inspection and maintenance repair practices have also been highlighted. The book will be useful for technicians and entry level engineers in these industrial sectors. Additionally, the book may also be used as primary or secondary reading for graduate and professional coursework.

Download or read book Introduction to Corrosion Science written by E. McCafferty and published by Springer Science & Business Media. This book was released on 2010-01-04 with total page 583 pages. Available in PDF, EPUB and Kindle. Book excerpt: This textbook is intended for a one-semester course in corrosion science at the graduate or advanced undergraduate level. The approach is that of a physical chemist or materials scientist, and the text is geared toward students of chemistry, materials science, and engineering. This textbook should also be useful to practicing corrosion engineers or materials engineers who wish to enhance their understanding of the fundamental principles of corrosion science. It is assumed that the student or reader does not have a background in electrochemistry. However, the student or reader should have taken at least an undergraduate course in materials science or physical chemistry. More material is presented in the textbook than can be covered in a one-semester course, so the book is intended for both the classroom and as a source book for further use. This book grew out of classroom lectures which the author presented between 1982 and the present while a professorial lecturer at George Washington University, Washington, DC, where he organized and taught a graduate course on “Environmental Effects on Materials.” Additional material has been provided by over 30 years of experience in corrosion research, largely at the Naval Research Laboratory, Washington, DC and also at the Bethlehem Steel Company, Bethlehem, PA and as a Robert A. Welch Postdoctoral Fellow at the University of Texas. The text emphasizes basic principles of corrosion science which underpin extensions to practice.

Download or read book Corrosion and Its Control written by H. VanDroffelaar and published by National Assn of Corrosion Engineers. This book was released on 1994-12-31 with total page 332 pages. Available in PDF, EPUB and Kindle. Book excerpt: A text that emphasizes the engineering aspects of corrosion and its control in ways helpful to practicing engineers, based on notes used by the authors for an advanced undergraduate engineering course at Queen's U., Kingston, Ontario. This revised and expanded edition places particular emphasis on u

Download or read book Corrosion in the Petrochemical Industry written by Linda Garverick and published by ASM International. This book was released on 1994-01-01 with total page 524 pages. Available in PDF, EPUB and Kindle. Book excerpt: A comprehensive collection of peer-reviewed data and information on corrosion in the petroleum, petrochemical, and chemical processing industries from a number of ASM International publications. The principal sources are Corrosion, Volume 13, and Failure Analysis and Prevention, Volume 11 of ASM H

Download or read book Corrosion and Surface Chemistry of Metals written by Dieter Landolt and published by EPFL Press. This book was released on 2007-05-02 with total page 640 pages. Available in PDF, EPUB and Kindle. Book excerpt: Textbook; grad.

Download or read book Corrosion written by Joseph R. Davis and published by ASM International. This book was released on 2000 with total page 563 pages. Available in PDF, EPUB and Kindle. Book excerpt: As the title suggests, this is an introductory book covering the basics of corrosion. It is intended primarily for professionals who are not corrosion experts, but may also be useful as a quick reference for corrosion engineers. Included in the 12 chapters are discussions of the physical principles and characteristics of corrosion, help in recognizing and preventing corrosion, and techniques for diagnosing corrosion failures.

Download or read book Handbook of Materials Selection written by Myer Kutz and published by John Wiley & Sons. This book was released on 2002-07-22 with total page 1524 pages. Available in PDF, EPUB and Kindle. Book excerpt: Erstmals in einem Band werden Werkstoffe hier (in zwei getrennten Systemen) sowohl nach ihrer technischen Anwendung als auch nach ihren Eigenschaften geordnet. - Benutzer können deshalb zunächst nach der Gruppe von Materialen suchen, die für eine spezielle Anwendung geeignet sind, und anschließend Details über jedes einzelne Material finden - Suchkriterien sind Eigenschaften wie Wärmeleitfähigkeit, optisches Reflexionsvermögen, Elastizität usw. und Anwendungsgebiete wie Bauwesen, Biomedizin, Fahrzeugbau, Luftfahrttechnik, Elektrotechnik usw. - berücksichtigt werden sowohl herkömmliche Werkstoffe (Eisen- und Nichteisenmetalle, Kunststoffe, Klebstoffe) als auch Kompositwerkstoffe und synthetische Materialen wie Laminate, Fasern und Keramiken

Download or read book Corrosion and Materials Selection written by Alireza Bahadori and published by . This book was released on 2014 with total page pages. Available in PDF, EPUB and Kindle. Book excerpt: The petroleum and chemical industries contain a wide variety of corrosive environments, many of whichare unique to these industries. Oil and gas production operations consume a tremendous amount of ironand steel pipe, tubing, pumps, valves, and sucker rods. Metallic corrosion is costly. However, the cost ofcorrosion is not just financial. Beyond the huge direct outlay of funds to repair or replace corroded structures are the indirect costs ' natural resources, potential hazards, and lost opportunity. Wasting natural resources is a direct contradiction to the growing need for sustainable development. By selecting the correct material and applying proper corrosion protection methods, these costs can bereduced, or even eliminated. This book provides a minimum design requirement for consideration whendesigning systems in order to prevent or control corrosion damage safely and economically, and addresses: Corrosion problems in petroleum and chemical industriesRequirements for corrosion controlChemical control of corrosive environmentsCorrosion inhibitors in refineries and petrochemical plantsMaterials selection and service life of materialsSurface preparation, protection and maintainabilityCorrosion monitoring - plant inspection techniques and laboratory corrosion testing techniques Intended for engineers and industry personnel working in the petroleum and chemical industries, this book is also a valuable resource for research and development teams, safety engineers, corrosion specialists and researchers in chemical engineering, engineering and materials science.

Download or read book Paint and Coatings written by P.E., Philip A. Schweitzer and published by CRC Press. This book was released on 2005-09-23 with total page 672 pages. Available in PDF, EPUB and Kindle. Book excerpt: Paint and Coatings: Applications and Corrosion Resistance helps designers, engineers, and maintenance personnel choose the appropriate coatings to best protect equipment, structures, and various components from corrosion, degradation, and failure. The book addresses all factors - including physical and mechanical properties, workability, co

Download or read book Corrosion and Materials in the Oil and Gas Industries written by Reza Javaherdashti and published by CRC Press. This book was released on 2013-04-26 with total page 733 pages. Available in PDF, EPUB and Kindle. Book excerpt: The advancement of methods and technologies in the oil and gas industries calls for new insight into the corrosion problems these industries face daily. With the application of more precise instruments and laboratory techniques as well as the development of new scientific paradigms, corrosion professionals are also witnessing a new era in the way data are gathered and interpreted. Corrosion and Materials in the Oil and Gas Industries draws on state-of-the-art corrosion and materials technology as well as integrity management to offer guidance on dealing with aging and life extension in the oil and gas industries. Get Expert Insights on Corrosion Identification, Prevention, and Mitigation The book features contributions by engineers, scientists, and business managers from around the world, including major oil- and gas-producing and -exporting countries. Organized into four parts, the book first provides introductory and background information. The second part explains the properties of construction materials and the underlying mechanisms of degradation, including a chapter on microbiologically influenced corrosion. The third part of the book delves into inspection and maintenance issues, examining material selection, corrosion prevention strategies, and the role of design. It also supplies models to help you estimate corrosion damage and select mitigation and monitoring techniques. The fourth part tackles corrosion hazards, safety and risk, and reliability. It also links corrosion mitigation and the management of asset integrity, highlighting the need for companies to maintain their infrastructure to remain competitive. Interpret Field Findings More Confidently and Discover Solutions to Your Corrosion Problems Throughout, this richly illustrated book combines theory with practical strategies and examples from industry. As infrastructure ages and is pushed beyond its original design life to meet increasing energy demands, it is essential that those responsible for managing the infrastructure have a thorough understanding of material degradation and corrosion. This book is an invaluable reference for anyone involved in corrosion management and materials selection, particularly in the oil and gas industries, whether upstream, midstream, or downstream.