Download or read book Material Instability Hazards in Mine processing Operations written by John W. Fredland and published by . This book was released on 1993 with total page 20 pages. Available in PDF, EPUB and Kindle. Book excerpt: Many accidents occur in the mining industry because of instability of material during handling and processing operations. This report provides information on safe working procedures at stockpiles and surge piles.
Download or read book Material Instability Hazards in Mine processing Operations written by and published by . This book was released on 1993 with total page 10 pages. Available in PDF, EPUB and Kindle. Book excerpt: Many accidents occur in the mining industry as a result of the instability of material during handling and processing operation. Accidents due to dump point instability at stockpiles, and at spoil or waste piles, for example, occur with alarming frequency. Miners must be trained to be better aware of these hazards. Information on safe working procedures at stockpiles and surge piles is provided. Mine operators must review their training and operating procedures regularly to ensure that hazardous conditions are avoided.
Download or read book Coal written by National Research Council and published by National Academies Press. This book was released on 2007-12-21 with total page 183 pages. Available in PDF, EPUB and Kindle. Book excerpt: Coal will continue to provide a major portion of energy requirements in the United States for at least the next several decades. It is imperative that accurate information describing the amount, location, and quality of the coal resources and reserves be available to fulfill energy needs. It is also important that the United States extract its coal resources efficiently, safely, and in an environmentally responsible manner. A renewed focus on federal support for coal-related research, coordinated across agencies and with the active participation of the states and industrial sector, is a critical element for each of these requirements. Coal focuses on the research and development needs and priorities in the areas of coal resource and reserve assessments, coal mining and processing, transportation of coal and coal products, and coal utilization.
Download or read book Catalog of Training Products for the Mining Industry written by National Mine Health and Safety Academy and published by . This book was released on 1996 with total page 124 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Guidelines for Mine Waste Dump and Stockpile Design written by Mark Hawley and published by CSIRO PUBLISHING. This book was released on 2017-04 with total page 385 pages. Available in PDF, EPUB and Kindle. Book excerpt: Guidelines for Mine Waste Dump and Stockpile Design is a comprehensive, practical guide to the investigation, design, operation and monitoring of mine waste dumps, dragline spoils and major stockpiles associated with large open pit mines. These facilities are some of the largest man-made structures on Earth, and while most have performed very well, there are cases where instabilities have occurred with severe consequences, including loss of life and extensive environmental and economic damage. Developed and written by industry experts with extensive knowledge and experience, this book is an initiative of the Large Open Pit (LOP) Project. It comprises 16 chapters that follow the life cycle of a mine waste dump, dragline spoil or stockpile from site selection to closure and reclamation. It describes the investigation and design process, introduces a comprehensive stability rating and hazard classification system, provides guidance on acceptability criteria, and sets out the key elements of stability and runout analysis. Chapters on site and material characterisation, surface water and groundwater characterisation and management, risk assessment, operations and monitoring, management of ARD, emerging technologies and closure are included. A chapter is also dedicated to the analysis and design of dragline spoils. Guidelines for Mine Waste Dump and Stockpile Design summarises the current state of practice and provides insight and guidance to mine operators, geotechnical engineers, mining engineers, hydrogeologists, geologists and other individuals that are responsible at the mine site level for ensuring the stability and performance of these structures. Readership includes mining engineers, geotechnical engineers, civil engineers, engineering geologists, hydrogeologists, environmental scientists, and other professionals involved in the site selection, investigation, design, permitting, construction, operation, monitoring, closure and reclamation of mine waste dumps and stockpiles.
Download or read book New Publications from the MSHA Informational Service Library written by Safety and Health Technology Center (Denver, Colo.). Informational Service Library and published by . This book was released on 1995 with total page 26 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Quarterly Update of Courses and Products written by and published by . This book was released on with total page 36 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Dump point Inspection Handbook written by and published by . This book was released on 2001 with total page 44 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Evolutionary and Revolutionary Technologies for Mining written by National Research Council and published by National Academies Press. This book was released on 2002-03-14 with total page 102 pages. Available in PDF, EPUB and Kindle. Book excerpt: The Office of Industrial Technologies (OIT) of the U. S. Department of Energy commissioned the National Research Council (NRC) to undertake a study on required technologies for the Mining Industries of the Future Program to complement information provided to the program by the National Mining Association. Subsequently, the National Institute for Occupational Safety and Health also became a sponsor of this study, and the Statement of Task was expanded to include health and safety. The overall objectives of this study are: (a) to review available information on the U.S. mining industry; (b) to identify critical research and development needs related to the exploration, mining, and processing of coal, minerals, and metals; and (c) to examine the federal contribution to research and development in mining processes.
Download or read book Developments in Ground Control in Mining 1981 2020 written by Syd S. Peng and published by Society for Mining, Metallurgy & Exploration. This book was released on 2022-06-03 with total page 434 pages. Available in PDF, EPUB and Kindle. Book excerpt: The best of ground control technology, 40 years in the making. Developments in Ground Control summarizes the objectives, methodology used, and major conclusions reached from papers presented and published in the International Conference on Ground Control in Mining (ICGCM) proceedings from 1981 to 2020. Because the subject areas of the papers published in the proceedings are so broad, ranging from accident training and coal/rock bursts to geology, pillar, multiseam mining, in situ stresses, roof falls, and roof supports to surface subsidence, the papers were grouped into 13 aggregate topics and addressed separately in 13 book chapters by 13 authors from 4 countries. These book chapters are a fresh look at the topics, providing new insights, sourcing older papers, and summarizing data. This is an enormous help for those seeking information on ground control. There were 1,795 papers in the 40 years of ICGCM proceedings in more than 40 ground control topical areas. It would certainly be very time consuming if not impossible to find the right papers of interest in a timely manner. This book makes it easy for interested people to find the progress, application, and achievements of certain techniques from the past 40 years and how they affected the field of ground control and the world mining industry, in particular, the United States. Generally speaking, most researchers tend to favor recent developments when performing a literature search, ignoring or considering old papers outdated. In contrast, over the last 40 years, most research findings for a specific topic in ICGCM received continuing attention for subsequent development or repeated citations if applications were successful.
Download or read book Energy Research Abstracts written by and published by . This book was released on 1994-05 with total page 438 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Mining and Processing Residues written by Alexandre Chagnes and published by Elsevier. This book was released on 2023-09-04 with total page 320 pages. Available in PDF, EPUB and Kindle. Book excerpt: Mining and Processing Residues: Future’s Source of Critical Raw Materials provides a comprehensive review of principal aspects of CRM-containing residues re-processing, including available sampling and analytical techniques, the latest available processing technologies, authorization and legal matters, and analysis of environmental, social, and economic impacts. Suitable for academic researchers, practicing engineers and students, the book is aimed at giving a complete and multilateral view of CRM recovery from the residues. Includes the most relevant techniques for residue sampling and analysis Describes the most recent technologies applicable for residue re-processing Covers authorization and legal aspects of residue storage and re-processing Includes case studies Provides analysis of environmental, social, and economic impacts of residue re-processing
Download or read book Mining and its Impact on the Environment written by Fred G. Bell and published by CRC Press. This book was released on 2006-09-27 with total page 561 pages. Available in PDF, EPUB and Kindle. Book excerpt: Winner of the 2007 E.B. Burwell, Jr. Award of the Geological Society of America Mining activity has left a legacy of hazards to the environment, such as waste, unstable ground and contamination, which can be problematic when redeveloping land. This book highlights the effects of past mining and provides information on the types of problems it may cause in both urban and rural areas. By way of example, the book also demonstrates how such problems may be anticipated, investigated, predicted, prevented and controlled. Furthermore, it shows how sites already affected by mining problems and hazards can be remediated and rehabilitated. Covering subsidence, surface mining, disposal of waste, problems resulting from mine closure and mineral processing, Mining and its Impact on the Environment is an excellent reference for practising mining and geotechnical engineers, as well as students in this field.
Download or read book Coal Abstracts written by and published by . This book was released on 1992 with total page 346 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book The Application of Major Hazard Risk Assessment MHRA to Eliminate Multiple Fatality Occurrences in the U S Minerals Industry written by Anthony T. Iannacchione and published by . This book was released on 2008 with total page 132 pages. Available in PDF, EPUB and Kindle. Book excerpt: "Major Hazard Risk Assessment (MHRA) is used to help prevent major hazards, e.g., fire, explosion, wind-blast, outbursts, spontaneous combustion, roof instability and chemical and hazardous substances, etc., from injuring miners. The structured process associated with MHRA helps to characterize the major hazards and evaluate engineering, management and work process factors that impact how a mine mitigates its highest risk. The National Institute for Occupational Safety and Health (NIOSH) studied the application of this technique to US mining conditions through a field-oriented pilot project. Risk assessment teams used in the pilot project were primarily composed of mining company personnel. Ten case studies were performed over a wide cross-section of mines. These mines were representative of the important mining commodities in the US minerals industry, i.e. coal, metal, non-metal, and aggregate. Also, the sizes of the mines ranged from small to large and were located across the country. The ten case studies demonstrate that most US mines have the capability to successfully implement an MHRA and that the MHRA methodology produced additional prevention controls and recovery measures to lessen the risk associated with a select population of major mining hazards. The basic ingredient for a successful MHRA is the desire to become more proactive in dealing with the risks associated with events that can cause multiple fatalities. A successful outcome is marked by a thorough examination of existing prevention controls and recovery measures. When pressed to consider more controls to further mitigate the risk, a well-staffed risk assessment team was able to identify additional controls. For these mining operations, it was important to add additional controls, even if they were not required by existing mining regulations, to lower the risks associated with the major hazards under consideration. If a mining operation is not willing to commit its best people to an MHRA or will not provide them with sufficient time to see the process through to its conclusion, the MHRA output may prove to be useless. Additionally, if a mining operation is not prepared to discuss its major hazards in an open and honest fashion and to present the findings of the risk assessment in a written report, the MHRA output will be unclear, and attempts to monitor or audit important controls may not be possible. A MHRA is most effective when the mining operation possesses 1) a proper understanding of its hazards, 2) experience with informal and basic-formal risk assessment techniques, 3) proper facilities, machinery and equipment, 4) suitable systems and procedures that represent industry Best Practice, 5) appropriate organizational support with adequate staff, communications and training, 6) a formal and thorough plan for emergency response, and 7) a safety risk management approach that is promoted and supported at all levels of the organization." - NIOSHTIC-2
Download or read book SME Mineral Processing and Extractive Metallurgy Handbook written by Courtney A. Young and published by Society for Mining, Metallurgy & Exploration. This book was released on 2019-02-01 with total page 2258 pages. Available in PDF, EPUB and Kindle. Book excerpt: This landmark publication distills the body of knowledge that characterizes mineral processing and extractive metallurgy as disciplinary fields. It will inspire and inform current and future generations of minerals and metallurgy professionals. Mineral processing and extractive metallurgy are atypical disciplines, requiring a combination of knowledge, experience, and art. Investing in this trove of valuable information is a must for all those involved in the industry—students, engineers, mill managers, and operators. More than 192 internationally recognized experts have contributed to the handbook’s 128 thought-provoking chapters that examine nearly every aspect of mineral processing and extractive metallurgy. This inclusive reference addresses the magnitude of traditional industry topics and also addresses the new technologies and important cultural and social issues that are important today. Contents Mineral Characterization and AnalysisManagement and ReportingComminutionClassification and WashingTransport and StoragePhysical SeparationsFlotationSolid and Liquid SeparationDisposalHydrometallurgyPyrometallurgyProcessing of Selected Metals, Minerals, and Materials
Download or read book Guidelines for Mine Waste Dump and Stockpile Design written by Mark Hawley and published by CSIRO PUBLISHING. This book was released on 2017-04-01 with total page 532 pages. Available in PDF, EPUB and Kindle. Book excerpt: Guidelines for Mine Waste Dump and Stockpile Design is a comprehensive, practical guide to the investigation, design, operation and monitoring of mine waste dumps, dragline spoils and major stockpiles associated with large open pit mines. These facilities are some of the largest man-made structures on Earth, and while most have performed very well, there are cases where instabilities have occurred with severe consequences, including loss of life and extensive environmental and economic damage. Developed and written by industry experts with extensive knowledge and experience, this book is an initiative of the Large Open Pit (LOP) Project. It comprises 16 chapters that follow the life cycle of a mine waste dump, dragline spoil or stockpile from site selection to closure and reclamation. It describes the investigation and design process, introduces a comprehensive stability rating and hazard classification system, provides guidance on acceptability criteria, and sets out the key elements of stability and runout analysis. Chapters on site and material characterisation, surface water and groundwater characterisation and management, risk assessment, operations and monitoring, management of ARD, emerging technologies and closure are included. A chapter is also dedicated to the analysis and design of dragline spoils. Guidelines for Mine Waste Dump and Stockpile Design summarises the current state of practice and provides insight and guidance to mine operators, geotechnical engineers, mining engineers, hydrogeologists, geologists and other individuals that are responsible at the mine site level for ensuring the stability and performance of these structures. Readership includes mining engineers, geotechnical engineers, civil engineers, engineering geologists, hydrogeologists, environmental scientists, and other professionals involved in the site selection, investigation, design, permitting, construction, operation, monitoring, closure and reclamation of mine waste dumps and stockpiles.
