Download or read book Material Flow and Microstructural Evolution During the Extrusion written by Yahya Mahmoodkhani and published by LAP Lambert Academic Publishing. This book was released on 2013 with total page 152 pages. Available in PDF, EPUB and Kindle. Book excerpt: Central to the competitiveness of Rio Tinto Alcan and other aluminum manufacturers, is the quantitative linkage between products and the processes by which they are made. This type of activity has gained attention internationally and there are significant programs underway to develop through process models for various metallurgical fabrication processes. Inherently, the need for these types of models is that the properties of the metal products depend on the microstructure of the material which in turn is a complex function of composition, grain size and orientation, distribution of phases and precipitates and its thermo-mechanical history. The development of a particular microstructure and the desired properties in an industrial process however is less than straightforward because the latter usually involves a complex deformation and temperature path which can be very different through the thickness of the material depending on its location. This book describes the development of a mathematical model and experimental study for the material flow and microstructure changes during extrusion of AA3003 aluminum alloy which is used for manufacturing of automobile heat exchangers.
Download or read book Mathematical Modelling of the Material Flow and Microstructural Evolution During the Extrusion of AA3003 Aluminum Alloy written by Yahya Mahmoodkhani and published by . This book was released on 2013 with total page pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Scientific and Engineering Progress on Aluminum Based Light Weight Materials Research Reports from the German Collaborative Research Center 692 written by Martin F.-X.Wagner and published by MDPI. This book was released on 2018-09-21 with total page 197 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book is a printed edition of the Special Issue "Scientific and Engineering Progress on Aluminum-Based Light-Weight Materials: Research Reports from the German Collaborative Research Center 692" that was published in Metals
Download or read book Materials Characterisation IV written by Andrea Alberto Mammoli and published by WIT Press. This book was released on 2009 with total page 465 pages. Available in PDF, EPUB and Kindle. Book excerpt: Until recently, engineering materials could be characterised successfully using relatively simple testing procedures. As materials technology advances, interest is growing in materials possessing complex meso-, micro- and nano-structures, which to a large extent determine their physical properties and behaviour. The purposes of materials modelling are many - optimisation, investigation of failure, simulation of production processes, to name a few. Modelling and characterisation are closely intertwined, increasingly so as the complexity of the material increases. Characterisation, in essence, is the connection between the abstract material model and the real-world behaviour of the material in question. Characterisation of complex materials therefore may require a combination of experimental techniques and computation. This book contains papers from the Fourth International Conference on Computational Methods and Experiments in Materials Characterisation which brought researchers who use computational methods, those who perform experiments, and of course those who do both, in all areas of materials characterisation, to discuss their recent results and ideas, in order to foster the multidisciplinary approach that has become necessary for the study of complex phenomena.
Download or read book Material Forming written by Lukasz Madej and published by Materials Research Forum LLC. This book was released on 2023-04-25 with total page 2163 pages. Available in PDF, EPUB and Kindle. Book excerpt: These proceedings present papers on Additive Manufacturing, Composites Forming Processes, Extrusion and Drawing, Forging and Rolling, Formability of Metallic Materials, Friction and Wear in Metal Forming, Incremental and Sheet Metal Forming, Innovative Joining by Forming Technologies, Lionel Fourment MS on Optimization and Inverse Analysis in Forming, Machining and Cutting, Material Behavior Modelling, New and Advanced Numerical Strategies for Material Forming, Non-Conventional Processes, Polymer Processing and Thermomechanical Properties, Sustainability on Material Forming, and Property-Controlled Forming.
Download or read book Material Forming written by Anna Carla Araujo and published by Materials Research Forum LLC. This book was released on 2024-05-20 with total page 2957 pages. Available in PDF, EPUB and Kindle. Book excerpt: These ESAFORM 2024 conference proceedings cover a wide range of topics: Additive manufacturing; Composites forming processes; Extrusion and drawing; Forging and rolling; Formability of metallic materials; Friction and wear in metal forming; Incremental and sheet metal forming; Innovative joining by forming technologies; Optimization and inverse analysis in forming; Machining, Cutting and severe plastic deformation processes; Material behavior modelling; New and advanced numerical strategies for material forming; Non-conventional processes; Polymer processing and thermomechanical properties; Sustainability on material forming. Keywords: WAAM Technology, Fused deposition Modeling (FDM), Fiber Composite Printers, Ultrasonic Powder Atomization, Finite Element Modeling (FEM), Laser Powder Bed Fusion (L-PBF), Rapid Prototyping in Additive Manufacturing, Directed Energy Deposition (DED), GTAW Droplet Deposition, Deep Learning, Thermoplastic Pultrusion, Textile Reinforcements, Thermoforming Simulation, New Sustainable Materials, Non-Crimp Fabrics, CFRP Scraps, PEEK Composites, Thermoplastic Sheets, Flax/PP Composites.
Download or read book Advances on Hot Extrusion and Simulation of Light Alloys written by A. Erman Tekkaya and published by Trans Tech Publications Ltd. This book was released on 2009-12-03 with total page 294 pages. Available in PDF, EPUB and Kindle. Book excerpt: Volume is indexed by Thomson Reuters CPCI-S (WoS). This special collection comprises 36 peer-reviewed papers giving an insight into the latest advances in extrusion technology and its simulation. The papers cover a wide range of topics and are grouped into the categories of: benchmark, microstructure, seam welds and composite extrusion, material flow and constitutive equations, dies and tools and process control and optimization. However, many other topics, such as new materials (magnesium and its composites) and new composite profiles, are covered.
Download or read book Magnesium written by Karl U. Kainer and published by John Wiley & Sons. This book was released on 2007 with total page 1144 pages. Available in PDF, EPUB and Kindle. Book excerpt: The need for light-weight materials, especially in the automobile industry, created renewed interest in innovative applications of magnesium materials. This demand has resulted in increased research and development activity in companies and research institutes in order to achieve an improved property profile and better choice of alloy systems. Here, development trends and application potential in different fields like the automotive industry and communication technology are discussed in an interdisciplinary framework.
Download or read book Advanced Manufacturing Technologies written by Gopal Prasad Sinha and published by Allied Publishers. This book was released on 2007 with total page 732 pages. Available in PDF, EPUB and Kindle. Book excerpt: Contributed papers presented at the conference organized by Central Mechanical Engineering Research Institute.
Download or read book Advances on Extrusion Technology and Simulation of Light Alloys written by Luca Tomesani and published by Trans Tech Publications Ltd. This book was released on 2008-02-11 with total page 242 pages. Available in PDF, EPUB and Kindle. Book excerpt: Volume is indexed by Thomson Reuters BCI (WoS). This collection offers a fully representative snapshot of modelling activities as applied to processes involving extrusion. It covers a wide range of topics, grouped into the categories: benchmark, keynotes, material flow and constitutive equations, microstructure, seam welds and process optimization, dies and tools.
Download or read book Microstructural Evolution During Equal Channel Angular Extrusion written by Padma Dhulipala and published by . This book was released on 2006 with total page 202 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Frontiers in Materials Modelling and Design written by Vijay Kumar and published by Springer Science & Business Media. This book was released on 2012-12-06 with total page 448 pages. Available in PDF, EPUB and Kindle. Book excerpt: It is about fifteen years since we started hearing about Computational Ma terials Science and Materials Modelling and Design. Fifteen years is a long time and all of us realise that the use of computational methods in the design of materials has not been rapid enough. We also know the reasons for this. Mate rials properties are not dependent on a single phenomenon. The properties of materials cover a wide range from electronic, thermal, mechanical to chemical and electro-chemical. Each of these class of properties depend on specific phe nomenon that takes place at different scales or levels of length from sub atomic to visible length levels. The energies controlling the phenomena also varies widely from a fraction of an electron volt to many joules. The complexity of materials are such that while models and methods for treating individual phenomenon have been perfected, incorporating them into a single programme taking into account the synergism is a formidable task. Two specific areas where the progress has been very rapid and substantive are prediction of phase stability and phase diagrams and embrittlement of steels by metalloids. The first three sections of the book contain papers which review the theoreti cal principles underlying materials modeling and simulations and show how they can be applied to the problems just mentioned. There is now a strong interest in designing new materials starting from nanoparticles and clusters.
Download or read book Microstructural and Mechanical Characterization of Alloys written by Marek Sroka and published by MDPI. This book was released on 2021-01-13 with total page 132 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book contains manuscripts related to alloys (engineering materials) to discuss potential materials, methods for improvement of the strength and cyclic properties of alloys, the stability of microstructures, the possible application of new (or improved) alloys, and the use of treatment for alloy improvement. The broad spectrum of topics included in the articles of this Special Issue demonstrates that research into the microstructural and mechanical characteristics of alloys represents a contemporary field. These topics are also envisaged to be of interest to scientists in other research centers, and we can still expect new developments in this investigation field.
Download or read book Advances in Wrought Magnesium Alloys written by Colleen Bettles and published by Elsevier. This book was released on 2012-04-25 with total page 478 pages. Available in PDF, EPUB and Kindle. Book excerpt: This important book summarises the wealth of recent research on our understanding of process-property relationships in wrought magnesium alloys and the way this understanding can be used to develop a new generation of alloys for high-performance applications. After an introductory overview of current developments in wrought magnesium alloys, part one reviews fundamental aspects of deformation behaviour. These chapters are the building blocks for the optimisation of processing steps covered in part two, which discusses casting, extrusion, rolling and forging technologies. The concluding chapters cover applications of wrought magnesium alloys in automotive and biomedical engineering. With its distinguished editors, and drawing on the work of leading experts in the field, Advances in wrought magnesium alloys is a standard reference for those researching, manufacturing and using these alloys. Summarises recent research on our understanding of process-property relationships in wrought magnesium alloys Discusses the way this understanding can be used to develop a new generation of alloys for high-performance applications Reviews casting, extrusion, rolling and forging technologies, fundamental aspects of deformation behaviour, and applications of wrought magnesium alloys in automotive and biomedical engineering
Download or read book Handbook of Workability and Process Design written by George E. Dieter and published by ASM International. This book was released on 2003-01-01 with total page 410 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Joints in Aluminium INALCO 98 written by M H Ogle and published by Woodhead Publishing. This book was released on 1999-09-30 with total page 566 pages. Available in PDF, EPUB and Kindle. Book excerpt: The proceedings of the 7th INALCO conference which was held at TWI, Cambridge in April 1998.
Download or read book Advances in Material Forming written by Francisco Chinesta and published by Springer Science & Business Media. This book was released on 2007-04-19 with total page 236 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book groups the main advances in material forming, considering different processes, both conventional and non-conventional. It focuses on polymers, composites and metals, which are analyzed from the state of the art. Special emphasis is devoted to the contributions of the European Scientific Association for Material Forming (ESAFORM) during the last decade and in particular the ones coming from its annual international conference.
