Download or read book Material Engineering and Application III written by Mosbeh Kaloop and published by Trans Tech Publications Ltd. This book was released on 2021-02-15 with total page 98 pages. Available in PDF, EPUB and Kindle. Book excerpt: Selected peer-reviewed full text papers from the 5th International Conference on Material Engineering and Application (ICMEA 2020) Selected, peer-reviewed papers from the 5th International Conference on Material Engineering and Application (ICMEA 2020), August 07-09, 2020, Jakarta, Indonesia
Download or read book Materials Design and Applications III written by Lucas F. M. da Silva and published by Springer Nature. This book was released on 2021-02-17 with total page 273 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book offers selected contributions to fundamental research and application in designing and engineering materials. It focuses on mechanical engineering applications such as automobile, railway, marine, aerospace, biomedical, pressure vessel technology, and turbine technology. This includes a wide range of material classes, like lightweight metallic materials, polymers, composites, and ceramics. Advanced applications include manufacturing using the new or newer materials, testing methods, and multi-scale experimental and computational aspects.
Download or read book Engineering Applications of Composites written by Bryan R. Noton and published by Elsevier. This book was released on 2016-06-15 with total page 538 pages. Available in PDF, EPUB and Kindle. Book excerpt: Composite Materials, Volume 3: Engineering Applications of Composites covers a variety of applications of both low- and high-cost composite materials in a number of business sectors, including material systems used in the electrical and nuclear industries. The book discusses the utilization of carbon-fiber reinforced plastics for a number of high-volume products; applications in road transportation; and the application of composite materials to civil aircraft structures. The text also describes the engineering considerations that enter into the selection and application of materials, as well as the composite applications in existing spacecraft hardware and includes projected applications for space vehicles and systems. The application of materials to military aircraft structure; the components applicable to personal and mass-transit vehicles; and composites in the ocean engineering industry are also considered. The book further tackles composite materials or composite structures principally found in buildings; composite uses in the chemical industries; and examples of fiber-glass-reinforced plastic components in key end-product markets. The text also looks into the most commonly employed molding techniques, mechanical and physical properties of various fiber glass-reinforced thermosets and thermoplastics, the resins and fiber-glass reinforcements available, and code information. The chemical, physical, and mechanical properties and application information about composites in the electrical and nuclear industries; and the potential high-volume applications of advanced composites are also encompassed. Engineers and people involved in the development of composite materials will find the book invaluable.
Download or read book Materials Design and Applications III written by Lucas F. M. da Silva and published by . This book was released on 2021 with total page 0 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book offers selected contributions to fundamental research and application in designing and engineering materials. It focuses on mechanical engineering applications such as automobile, railway, marine, aerospace, biomedical, pressure vessel technology, and turbine technology. This includes a wide range of material classes, like lightweight metallic materials, polymers, composites, and ceramics. Advanced applications include manufacturing using the new or newer materials, testing methods, and multi-scale experimental and computational aspects.
Download or read book Materials for Engineering written by J Martin and published by Woodhead Publishing. This book was released on 2006-04-28 with total page 269 pages. Available in PDF, EPUB and Kindle. Book excerpt: This third edition of what has become a modern classic presents a lively overview of Materials Science which is ideal for students of Structural Engineering. It contains chapters on the structure of engineering materials, the determination of mechanical properties, metals and alloys, glasses and ceramics, organic polymeric materials and composite materials. It contains a section with thought-provoking questions as well as a series of useful appendices. Tabulated data in the body of the text, and the appendices, have been selected to increase the value of Materials for engineering as a permanent source of reference to readers throughout their professional lives. The second edition was awarded Choice’s Outstanding Academic Title award in 2003. This third edition includes new information on emerging topics and updated reading lists.
Download or read book Material Engineering and Application II written by Mosbeh Kaloop and published by Trans Tech Publications Ltd. This book was released on 2020-05-05 with total page 414 pages. Available in PDF, EPUB and Kindle. Book excerpt: This volume of the journal contains papers presented at the 4th International Conference on Material Engineering and Application (4th ICMEA 2019, Malaysia, August 23-25, 2019). Published articles reflect the modern trends in the area of development and research of modern materials and technologies of processing and synthesis. This collection will be useful for specialists from many branches of engineering sciences and modern production.
Download or read book Advanced Materials and Application III written by Mosbeh Kaloop and published by Trans Tech Publications Ltd. This book was released on 2020-08-14 with total page 182 pages. Available in PDF, EPUB and Kindle. Book excerpt: Selected peer-reviewed full text papers from 3rd International Symposium on Advanced Materials and Application (ISAMA 2020) Selected, peer-reviewed papers from the 3rd International Symposium on Advanced Materials and Application (ISAMA 2020), February 14-16, 2020 Seoul, South Korea
Download or read book Composite Materials written by It Meng Low and published by Elsevier. This book was released on 2021-06-18 with total page 690 pages. Available in PDF, EPUB and Kindle. Book excerpt: Composite materials have been well developed to meet the challenges of high-performing material properties targeting engineering and structural applications. The ability of composite materials to absorb stresses and dissipate strain energy is vastly superior to that of other materials such as polymers and ceramics, and thus they offer engineers many mechanical, thermal, chemical and damage-tolerance advantages with limited drawbacks such as brittleness. Composite Materials: Manufacturing, Properties and Applications presents a comprehensive review of current status and future directions, latest technologies and innovative work, challenges and opportunities for composite materials. The chapters present latest advances and comprehensive coverage of material types, design, fabrication, modelling, properties and applications from conventional composite materials to advanced composites such as nanocomposites, self-healing and smart composites. The book targets researchers in the field of advanced composite materials and ceramics, students of materials science and engineering at the postgraduate level, as well as material engineers and scientists working in industrial R& D sectors for composite material manufacturing. Comprehensive coverage of material types, design, fabrication, modelling, properties and applications from conventional composite materials to advanced composites such as nanocomposites, self-healing and smart composites Features latest advances in terms of mechanical properties and other material parameters which are essential for designers and engineers in the composite and composite reinforcement manufacturing industry, as well as all those with an academic research interest in the subject Offers a good platform for end users to refer to the latest technologies and topics fitting into specific applications and specific methods to tackle manufacturing or material processing issues in relation to different types of composite materials
Download or read book Fibrous and Composite Materials for Civil Engineering Applications written by R Fangueiro and published by Elsevier. This book was released on 2011-04-19 with total page 422 pages. Available in PDF, EPUB and Kindle. Book excerpt: The use of fibrous materials in civil engineering, both as structural reinforcement and in non-structural applications such as geotextiles, is an important and interesting development. Fibrous and composite materials for civil engineering applications analyses the types and properties of fibrous textile and structures and their applications in reinforcement and civil engineering. Part one introduces different types of fibrous textiles and structures. Chapters cover the properties of natural and man-made fibres and of yarns, as well as an overview of textile structures. Part two focuses on fibrous material use in concrete reinforcement, with chapters on the properties and applications of steel fibre reinforced concrete, natural fibre reinforced concrete and the role of fibre reinforcement in mitigating shrinkage cracks. In part three, the applications of fibrous material-based composites in civil engineering are covered. Chapters concentrate on production techniques and applications such as reinforcement of internal structures, structural health monitoring and textile materials in architectural membranes. With its distinguished editor and international team of contributors, Fibrous and composite materials for civil engineering applications is a standard reference for fabric and composite manufacturers, civil engineers and professionals, as well as academics with a research interest in this field. Explores the development of fibrous materials in civil engineering, both as structural reinforcement and in non-structural applications such as geotextiles Key topics include short fibre reinforced concrete, natural fibre reinforced concrete and high performance fibre reinforced cementitious composites A standard reference for fabric and composite manufacturers, civil engineers and professionals, as well as academics with a research interest in this field
Download or read book Materials Design and Applications written by Lucas Filipe Martins da Silva and published by . This book was released on 2019 with total page pages. Available in PDF, EPUB and Kindle. Book excerpt: This book highlights fundamental research on the design and application of engineering materials, and predominantly mechanical engineering applications. This area includes a wide range of technologies and materials, including metals, polymers, composites, and ceramics. Advanced applications include manufacturing cutting-edge materials, testing methods, and multi-scale experimental and computational aspects. The book introduces readers to a wealth of engineering applications in transport, civil, packaging and power generation.
Download or read book Engineering Materials written by RK Rajput and published by S. Chand Publishing. This book was released on 2008 with total page 528 pages. Available in PDF, EPUB and Kindle. Book excerpt: The book has been throughly revised.Several new articles have been added,specifically,in chapters in mortar ,Concrete ,Paint:Varnishes,Distempers and Antitermite treatmant to make the book to still more comprehensive and a useful unit for the students preparing for the examination in the subject.
Download or read book Engineering Materials and Metallurgy written by RK Rajput and published by S. Chand Publishing. This book was released on 2006 with total page 338 pages. Available in PDF, EPUB and Kindle. Book excerpt: This treatise on Engineering Materials and Metallurgy contains comprehensive treatment of the matter in simple,lucid and direct language and envelopes a large number of figures which reinforce the text in the most efficient and effective way.The book comprise five chapters(excluding basic concepts)in all and fully and exhaustively covers the syllabus in the above mentioned subject of 4th.Semester Mechnical,Production,Automobile Engineering and 2nd semester Mechnical disciplines of Anna University.
Download or read book Engineering Design Applications III written by Andreas Öchsner and published by Springer Nature. This book was released on 2020-03-05 with total page 348 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book provides an update on recent advances in various areas of modern engineering design, such as mechanical, materials, computer, and process engineering, which provide the foundation for the development of improved structures, materials, and processes. The modern design cycle is characterized by the interaction of different disciplines and a strong shift toward computer-based approaches involving only a small number of experiments for verification purposes. A major driver for this development is the increased demand for cost reduction, which is also connected to environmental demands. In the transportation industry (e.g. automotive or aerospace), where there is a demand for greater fuel efficiency, one solution is lighter structures and/or improved processes for energy conversion. Another emerging area is the interaction of classical engineering with the health and medical sector.
Download or read book Neutrons and Synchrotron Radiation in Engineering Materials Science written by Peter Staron and published by John Wiley & Sons. This book was released on 2017-06-19 with total page 486 pages. Available in PDF, EPUB and Kindle. Book excerpt: Retaining its proven concept, the second edition of this ready reference specifically addresses the need of materials engineers for reliable, detailed information on modern material characterization methods. As such, it provides a systematic overview of the increasingly important field of characterization of engineering materials with the help of neutrons and synchrotron radiation. The first part introduces readers to the fundamentals of structure-property relationships in materials and the radiation sources suitable for materials characterization. The second part then focuses on such characterization techniques as diffraction and scattering methods, as well as direct imaging and tomography. The third part presents new and emerging methods of materials characterization in the field of 3D characterization techniques like three-dimensional X-ray diffraction microscopy. The fourth and final part is a collection of examples that demonstrate the application of the methods introduced in the first parts to problems in materials science. With thoroughly revised and updated chapters and now containing about 20% new material, this is the must-have, in-depth resource on this highly relevant topic.
Download or read book Neutrons and Synchrotron Radiation in Engineering Materials Science written by Walter Reimers and published by John Wiley & Sons. This book was released on 2008-06-25 with total page 462 pages. Available in PDF, EPUB and Kindle. Book excerpt: Besides its coverage of the four important aspects of synchrotron sources, materials and material processes, measuring techniques, and applications, this ready reference presents both important method types: diffraction and tomography. Following an introduction, a general section leads on to methods, while further sections are devoted to emerging methods and industrial applications. In this way, the text provides new users of large-scale facilities with easy access to an understanding of both the methods and opportunities offered by different sources and instruments.
Download or read book Mechanical and Material Engineering III written by Zheng Yi Jiang and published by Trans Tech Publications Ltd. This book was released on 2015-07-27 with total page 282 pages. Available in PDF, EPUB and Kindle. Book excerpt: Collection of selected, peer reviewed papers from the 2015 3rd International Forum on Mechanical and Material Engineering (IFMME 2015), April 18-19, 2015, Guangzhou, China. The 51 papers are grouped as follows: Chapter 1: Design and Numerical Simulation; Chapter 2: Materials Research and Processing Technology; Chapter 3: Mechanical Transmission, Friction and Wear; Chapter 4: Industrial Robots, Control and Automation
Download or read book Engineering Design Applications IV written by Andreas Öchsner and published by Springer Nature. This book was released on 2022-05-04 with total page 258 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book presents the developments in engineering design application. The chapters on mechanical, materials, computer and process engineering provide the foundation for the design and development of improved structures, materials and processes. They present alternatives with cost reduction and environmental demands. The book content links the interaction of classical engineering with the health, medical and environmental sector.