Download or read book Challenges in Mechanics of Time Dependent Materials and Processes in Conventional and Multifunctional Materials Volume 2 written by Bonnie Antoun and published by Springer Science & Business Media. This book was released on 2012-11-09 with total page 162 pages. Available in PDF, EPUB and Kindle. Book excerpt: Challenges in Mechanics of Time-Dependent Materials and Processes in Conventional and Multifunctional Materials, Volume 2 represents one of seven volumes of technical papers presented at the Society for Experimental Mechanics SEM 12th International Congress & Exposition on Experimental and Applied Mechanics, held at Costa Mesa, California, June 11-14, 2012. The full set of proceedings also includes volumes on: Dynamic Behavior of Materials, Imaging Methods for Novel Materials and Challenging Applications, Experimental and Applied Mechanics, 2nd International Symposium on the Mechanics of Biological Systems and Materials 13th International Symposium on MEMS and Nanotechnology and, Composite Materials and the 1st International Symposium on Joining Technologies for Composites.
Download or read book Your Leadership Edge written by Ed O'Malley and published by . This book was released on 2015-09-01 with total page pages. Available in PDF, EPUB and Kindle. Book excerpt: Your Leadership Edge is designed as a resource for applying the ideas fostered by the Kansas Leadership Center.
Download or read book Challenges In Mechanics of Time Dependent Materials and Processes in Conventional and Multifunctional Materials Volume 2 written by Bonnie Antoun and published by Springer. This book was released on 2016-08-23 with total page 0 pages. Available in PDF, EPUB and Kindle. Book excerpt: Challenges in Mechanics of Time-Dependent Materials and Processes in Conventional and Multifunctional Materials, Volume 2: Proceedings of the 2013 SEM Annual Conference& Exposition on Experimental and Applied Mechanics, the second volume of eight from the Conference, brings together contributions to this important area of research and engineering. The collection presents early findings and case studies on fundamental and applied aspects of Experimental Mechanics, including papers in the following general technical research areas: Metallic, Polymeric and Composite Materials Effects of Extreme Environments including Radiation Resistance, Damage, and Aging Challenges in Time-dependent Behavior Modeling of Low, Moderate and High Strain Rates Effects of Frequency and Hysteretic Heating Effects of Inhomogeneities on the Time-Dependent Behavior Composite, Hybrid and Multifunctional Materials Challenges in Time-dependent Behavior Modeling Viscoelastoplasticity and Damage Effects of Interfaces and Interphases on the Time-Dependent Behavior Environmental and Reactive Property Change Effects on Thermomechanical and Multifunctional Behaviors Modeling and Characterization of Fabrication Processes of Conventional and Multifunctional Materials Time-dependent and Small-scale Effects in Micro/Nano-scale Testing Time-dependent Processes in Biomaterials
Download or read book Material and Process Challenges written by Institute for Interconnecting and Packaging Electronic Circuits and published by . This book was released on 1996 with total page 140 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Actual Challenges in Materials Science and Processing Technologies II written by Oleg Bazaluk and published by Trans Tech Publications Ltd. This book was released on 2021-09-06 with total page 257 pages. Available in PDF, EPUB and Kindle. Book excerpt: Special topic volume with invited peer-reviewed papers only
Download or read book Materials Processing written by Lorraine F. Francis and published by Academic Press. This book was released on 2015-12-28 with total page 615 pages. Available in PDF, EPUB and Kindle. Book excerpt: Materials Processing is the first textbook to bring the fundamental concepts of materials processing together in a unified approach that highlights the overlap in scientific and engineering principles. It teaches students the key principles involved in the processing of engineering materials, specifically metals, ceramics and polymers, from starting or raw materials through to the final functional forms. Its self-contained approach is based on the state of matter most central to the shaping of the material: melt, solid, powder, dispersion and solution, and vapor. With this approach, students learn processing fundamentals and appreciate the similarities and differences between the materials classes. The book uses a consistent nomenclature that allow for easier comparisons between various materials and processes. Emphasis is on fundamental principles that gives students a strong foundation for understanding processing and manufacturing methods. Development of connections between processing and structure builds on students’ existing knowledge of structure-property relationships. Examples of both standard and newer additive manufacturing methods throughout provide students with an overview of the methods that they will likely encounter in their careers. This book is intended primarily for upper-level undergraduates and beginning graduate students in Materials Science and Engineering who are already schooled in the structure and properties of metals, ceramics and polymers, and are ready to apply their knowledge to materials processing. It will also appeal to students from other engineering disciplines who have completed an introductory materials science and engineering course. Coverage of metal, ceramic and polymer processing in a single text provides a self-contained approach and consistent nomenclature that allow for easier comparisons between various materials and processes Emphasis on fundamental principles gives students a strong foundation for understanding processing and manufacturing methods Development of connections between processing and structure builds on students’ existing knowledge of structure - property relationships Examples of both standard and newer additive manufacturing methods throughout provide students with an overview of the methods that they will likely encounter in their careers
Download or read book A History of ALA Policy on Intellectual Freedom written by Office for Intellectual Freedom (OIF) and published by American Library Association. This book was released on 2015-07-01 with total page 359 pages. Available in PDF, EPUB and Kindle. Book excerpt: Collecting several key documents and policy statements, this supplement to the ninth edition of the Intellectual Freedom Manual traces a history of ALA’s commitment to fighting censorship. An introductory essay by Judith Krug and Candace Morgan, updated by OIF Director Barbara Jones, sketches out an overview of ALA policy on intellectual freedom. An important resource, this volume includes documents which discuss such foundational issues as The Library Bill of RightsProtecting the freedom to readALA’s Code of EthicsHow to respond to challenges and concerns about library resourcesMinors and internet activityMeeting rooms, bulletin boards, and exhibitsCopyrightPrivacy, including the retention of library usage records
Download or read book Materials and Processes written by Barrie D. Dunn and published by Springer. This book was released on 2015-12-29 with total page 677 pages. Available in PDF, EPUB and Kindle. Book excerpt: The objective of this book is to assist scientists and engineers select the ideal material or manufacturing process for particular applications; these could cover a wide range of fields, from light-weight structures to electronic hardware. The book will help in problem solving as it also presents more than 100 case studies and failure investigations from the space sector that can, by analogy, be applied to other industries. Difficult-to-find material data is included for reference. The sciences of metallic (primarily) and organic materials presented throughout the book demonstrate how they can be applied as an integral part of spacecraft product assurance schemes, which involve quality, material and processes evaluations, and the selection of mechanical and component parts. In this successor edition, which has been revised and updated, engineering problems associated with critical spacecraft hardware and the space environment are highlighted by over 500 illustrations including micrographs and fractographs. Space hardware captured by astronauts and returned to Earth from long durations in space are examined. Information detailed in the Handbook is applicable to general terrestrial applications including consumer electronics as well as high reliability systems associated with aeronautics, medical equipment and ground transportation. This Handbook is also directed to those involved in maximizing the relia bility of new materials and processes for space technology and space engineering. It will be invaluable to engineers concerned with the construction of advanced structures or mechanical and electronic sub-systems.
Download or read book Solar Silicon Processes written by Bruno Ceccaroli and published by CRC Press. This book was released on 2016-10-03 with total page 316 pages. Available in PDF, EPUB and Kindle. Book excerpt: Polycrystalline silicon (commonly called "polysilicon") is the material of choice for photovoltaic (PV) applications. Polysilicon is the purest synthetic material on the market, though its processing through gas purification and decomposition (commonly called "Siemens" process) carries high environmental risk. While many current optoelectronic applications require high purity, PV applications do not and therefore alternate processes and materials are being explored for PV grade silicon. Solar Silicon Processes: Technologies, Challenges, and Opportunities reviews current and potential future processing technologies for PV applications of solar silicon. It describes alternative processes and issues of material purity, cost, and environmental impact. It covers limits of silicon use with respect to high-efficiency solar cells and challenges arising from R&D activities. The book also defines purity requirements and purification processes of metallurgical grade silicon (MG-Si) and examines production of solar grade silicon by novel processes directly from MG-Si and/or by decomposition of silane gas in a fluidized bed reactor (FBR). Furthermore, the book: Analyzes past research and industrial development of low-cost silicon processes in view of understanding future trends in this field. Discusses challenges and probability of success of various solar silicon processes. Covers processes that are more environmentally sensitive. Describes limits of silicon use with respect to high-efficiency solar cells and challenges arising from R&D activities. Defines purity requirements and purification processes of MG-Si. Examines production of solar grade silicon directly from MG-Si.
Download or read book Pharmaceutical Process Development written by John Blacker and published by Royal Society of Chemistry. This book was released on 2011-08-17 with total page 375 pages. Available in PDF, EPUB and Kindle. Book excerpt: Pharmaceutical process research and development is an exacting, multidisciplinary effort but a somewhat neglected discipline in the chemical curriculum. This book presents an overview of the many facets of process development and how recent advances in synthetic organic chemistry, process technology and chemical engineering have impacted on the manufacture of pharmaceuticals. In 15 concise chapters the book covers such diverse subjects as route selection and economics, the interface with medicinal chemistry, the impact of green chemistry, safety, the crucial role of physical organic measurements in gaining a deeper understanding of chemical behaviour, the role of the analyst, new tools and innovations in reactor design, purification and separation, solid state chemistry and its role in formulation. The book ends with an assessment of future trends and challenges. The book provides a valuable overview of: both early and late stage chemical development, how safe and scaleable synthetic routes are designed, selected and developed, the importance of the chemical engineering, analytical and manufacturing interfaces, the key enabling technologies, including catalysis and biocatalysis, the importance of the green chemical perspective and solid form issues. The book, written and edited by experts in the field, is a contemporary, holistic treatise, with a logical sequence for process development and mini-case histories within the chapters to bring alive different aspects of the process. It is completely pharmaceutical themed, encompassing all essential aspects, from route and reagent selection to manufacture of the active compound. The book is aimed at both graduates and postgraduates interested in a career in the pharmaceutical industry. It informs them about the breadth of the work carried out in chemical research and development departments, and gives them a feel for the challenges involved in the job. The book is also of value to academics who often understand the drug discovery arena, but have far less appreciation of the drug development area, and are thus unable to advise their students about the relative merits of careers in chemical development versus discovery.
Download or read book What s Your Problem Identifying and Solving the Five Types of Process Problems written by Kicab Castaneda-Mendez and published by CRC Press. This book was released on 2017-07-27 with total page 195 pages. Available in PDF, EPUB and Kindle. Book excerpt: Typically, root cause analysis is taught by explaining a variety of tools that require users to gain considerable experience before being able to apply them correctly in the proper settings. What's Your Problem? Identifying and Solving the Five Types of Process Problems simplifies process problem solving and outlines specific techniques to help you identify the various types of process problems and solve them effectively and efficiently. Arguing that there are only five types of process problems, the book explains that the Six Sigma methodology define, measure, analyze, improve, control (DMAIC) can be vastly simplified for learning, applying, teaching, and mentoring. It identifies the five types of process problems and describes how to solve them using a three-step procedure: Identify the type of problem Find the root cause Address the root cause Describing how to maximize ROI for Lean Six Sigma initiatives, the book: Facilitates the application of Lean and Six Sigma principles to both self-learning and teaching others process improvement Presents time-tested methods to help you reduce start-to-finish improvement/project times Identifies techniques that can shorten the time it takes to complete projects, reduce documentation of projects, and increase overall understanding of your projects Outlining proven approaches for seamlessly integrating Lean and Six Sigma methodologies with learning and teaching process improvement, the book will help to improve your courses so that participants acquire essential skills quicker and at lower costs. For the self-initiated, this book will get you identifying and solving the two most common process problems within hours, rather than days or weeks.
Download or read book Materials and Process Challenges written by International SAMPE Symposium and Exhibition and published by . This book was released on with total page 912 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Manufacturing Process Selection Handbook written by K. G. Swift and published by Butterworth-Heinemann. This book was released on 2013-02-15 with total page 457 pages. Available in PDF, EPUB and Kindle. Book excerpt: Manufacturing Process Selection Handbook provides engineers and designers with process knowledge and the essential technological and cost data to guide the selection of manufacturing processes early in the product development cycle. Building on content from the authors’ earlier introductory Process Selection guide, this expanded handbook begins with the challenges and benefits of identifying manufacturing processes in the design phase and appropriate strategies for process selection. The bulk of the book is then dedicated to concise coverage of different manufacturing processes, providing a quick reference guide for easy comparison and informed decision making. For each process examined, the book considers key factors driving selection decisions, including: Basic process descriptions with simple diagrams to illustrate Notes on material suitability Notes on available process variations Economic considerations such as costs and production rates Typical applications and product examples Notes on design aspects and quality issues Providing a quick and effective reference for the informed selection of manufacturing processes with suitable characteristics and capabilities, Manufacturing Process Selection Handbook is intended to quickly develop or refresh your experience of selecting optimal processes and costing design alternatives in the context of concurrent engineering. It is an ideal reference for those working in mechanical design across a variety of industries and a valuable learning resource for advanced students undertaking design modules and projects as part of broader engineering programs. Provides manufacturing process information maps (PRIMAs) provide detailed information on the characteristics and capabilities of 65 processes in a standard format Includes process capability charts detailing the processing tolerance ranges for key material types Offers detailed methods for estimating costs, both at the component and assembly level
Download or read book Major Administrative Process Problems written by United States. Congress. House. Committee on Interstate and Foreign Commerce and published by . This book was released on 1959 with total page 814 pages. Available in PDF, EPUB and Kindle. Book excerpt: Examines exercise of adjudicatory and rulemaking authority by Federal independent regulatory commissions. Focuses on equitability of administrative procedures and the role of communication between regulatory agencies and regulated industries.
Download or read book Advances in Laser and Surface Material Processing written by Tomasz Tański and published by Trans Tech Publications Ltd. This book was released on 2020-07-24 with total page 192 pages. Available in PDF, EPUB and Kindle. Book excerpt: Special topic volume with invited peer-reviewed papers only
Download or read book Composite Materials Processing Using Microwave Heating Technology written by Manoj Kumar Singh and published by Springer Nature. This book was released on with total page 292 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Advances in Production Management Systems Value Networks Innovation Technologies and Management written by Jan Frick and published by Springer. This book was released on 2012-09-26 with total page 643 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book constitutes the thoroughly refereed post-conference proceedings of the International IFIP WG 5.7 Conference on Advances in Production Management Systems, APMS 2011, held in Stavanger, Norway, in September 2011. The 66 revised and extended full papers were carefully reviewed and selected from 124 papers presented at the conference. The papers are organized in 3 parts: production process, supply chain management, and strategy. They represent the breadth and complexity of topics in operations management, ranging from optimization and use of technology, management of organizations and networks, to sustainable production and globalization. The authors use a broad range of methodological approaches spanning from grounded theory and qualitative methods, via a broad set of statistical methods to modeling and simulation techniques.
