Download or read book Manufacturing Technology written by Helmi A. Youssef and published by CRC Press. This book was released on 2023-08-17 with total page 972 pages. Available in PDF, EPUB and Kindle. Book excerpt: This new edition textbook provides comprehensive knowledge and insight into various aspects of manufacturing technology, processes, materials, tooling, and equipment. Its main objective is to introduce the grand spectrum of manufacturing technology to individuals who will be involved in the design and manufacturing of finished products and to provide them with basic information on manufacturing technologies. Manufacturing Technology: Materials, Processes, and Equipment, Second Edition, is written in a descriptive manner, where the emphasis is on the fundamentals of the process, its capabilities, typical applications, advantages, and limitations. Mathematical modeling and equations are used only when they enhance the basic understanding of the material dealt with. The book is a fundamental textbook that covers all the manufacturing processes, materials, and equipment used to convert the raw materials to a final product. It presents the materials used in manufacturing processes and covers the heat treatment processes, smelting of metals, and other technological processes such as casting, forming, powder metallurgy, joining processes, and surface technology. Manufacturing processes for polymers, ceramics, and composites are also covered. The book also covers surface technology, fundamentals of traditional and nontraditional machining processes, numerical control of machine tools, industrial robots and hexapods, additive manufacturing, and industry 4.0 technologies. The book is written specifically for undergraduates in industrial, manufacturing, mechanical, and materials engineering disciplines of the second to fourth levels to cover complete courses of manufacturing technology taught in engineering colleges and institutions all over the world. It also covers the needs of production and manufacturing engineers and technologists participating in related industries where it is expected to be part of their professional library. Additionally, the book can be used by students in other disciplines concerned with design and manufacturing, such as automotive and aerospace engineering.
Download or read book Material and Manufacturing Technology X written by Mohd Hamdi Bin Abdul Shukor and published by Trans Tech Publications Ltd. This book was released on 2020-03-06 with total page 260 pages. Available in PDF, EPUB and Kindle. Book excerpt: This volume contains papers from the 10th International Conference on Material and Manufacturing Technology (ICMMT 2019), which took place in Kuala Lumpur, Malaysia, from 26 to 28 of April, 2019 and presents the results of engineering researches in the area of materials science and technologies of materials processing. We think this papers collection will be useful and interesting for many technical specialists from various fields of modern production.
Download or read book Materials and Manufacturing An Introduction to How they Work and Why it Matters written by Mark Atwater and published by McGraw Hill Professional. This book was released on 2018-09-14 with total page 704 pages. Available in PDF, EPUB and Kindle. Book excerpt: A practical guide to materials and manufacturing concepts and applications Written in a straightforward, conversational style, this comprehensive textbook offers a hands-on introduction to materials science and manufacturing techniques. You will explore metallic and nonmetallic materials, their properties and applications, and how products are made from them, including traditional, additive, and advanced manufacturing methods. Materials and Manufacturing: An Introduction to How They Work and Why It Matters starts off by explaining materials science fundamentals and progresses to outline manufacturing processes in the order in which they are often employed. Coverage includes:•Metallic materials and processing•Nonmetallic materials and processing•Practical considerations in materials and manufacturing•Material structure, identification, and application•Compositional and property-based classification•Mechanical, thermal, and environmental concepts•Methods of testing materials•Sawing, broaching, filing, and abrasive machining•Milling, turning, boring, and hole making operations•Cohesive assembly through heat and chemical welding•Mechanical and adhesive assembly and finishing operations•The benefits and roles of additive and advanced manufacturing
Download or read book Introduction to Manufacturing Processes and Materials written by Robert Creese and published by CRC Press. This book was released on 2017-12-19 with total page 416 pages. Available in PDF, EPUB and Kindle. Book excerpt: The first manufacturing book to examine time-based break-even analysis, this landmark reference/text applies cost analysis to a variety of industrial processes, employing a new, problem-based approach to manufacturing procedures, materials, and management. An Introduction to Manufacturing Processes and Materials integrates analysis of material costs and process costs, yielding a realistic, effective approach to planning and executing efficient manufacturing schemes. It discusses tool engineering, particularly in terms of cost for press work, forming dies, and casting patterns, process parameters such as gating and riser design for casting, feeds, and more.
Download or read book Green Materials and Advanced Manufacturing Technology written by Samson Jerold Samuel Chelladurai and published by CRC Press. This book was released on 2020-12-29 with total page 339 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book includes recent theoretical and practical advancements in green composite materials and advanced manufacturing technology. It provides important original and theoretical experimental results which use nonroutine technologies often unfamiliar to some readers and covers novel applications of more familiar experimental techniques and analyses of composite problems. Green Materials and Advanced Manufacturing Technology: Concepts and Applications provides insight and a better understanding into the development of green composite materials and advanced manufacturing technology used in various manufacturing sectors. It highlights recent trends in the fields of green composites, metal matrix composites, ceramic matrix composites, surface modification using laser cladding, types of dust collectors in waste management and recycling in industries, machinability studies of metals and composites using surface grinding, drilling, electrical discharge machining, joining of metals using friction stir welding, shielded metal arc welding, and linear friction welding. This book is written for engineering students, postgraduate students, research scholars, faculty members, and industry professionals who are engaged in green composite materials and development of advanced manufacturing technology.
Download or read book Manufacturing Technology for Aerospace Structural Materials written by Flake C Campbell Jr and published by Elsevier. This book was released on 2011-08-31 with total page 617 pages. Available in PDF, EPUB and Kindle. Book excerpt: The rapidly-expanding aerospace industry is a prime developer and user of advanced metallic and composite materials in its many products. This book concentrates on the manufacturing technology necessary to fabricate and assemble these materials into useful and effective structural components. Detailed chapters are dedicated to each key metal or alloy used in the industry, including aluminum, magnesium, beryllium, titanium, high strength steels, and superalloys. In addition the book deals with composites, adhesive bonding and presents the essentials of structural assembly. This book will be an important resource for all those involved in aerospace design and construction, materials science and engineering, as well as for metallurgists and those working in related sectors such as the automotive and mass transport industries. Flake Campbell Jr has over thirty seven years experience in the aerospace industry and is currently Senior Technical Fellow at the Boeing Phantom Works in Missouri, USA. * All major aerospace structural materials covered: metals and composites* Focus on details of manufacture and use* Author has huge experience in aerospace industry* A must-have book for materials engineers, design and structural engineers, metallurgical engineers and manufacturers for the aerospace industry
Download or read book Materials and Manufacturing Technology written by Roy A. Lindberg and published by . This book was released on 1968 with total page 658 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Material and Manufacturing Technology IX written by Vladimir Khovaylo and published by Trans Tech Publications Ltd. This book was released on 2018-09-20 with total page 130 pages. Available in PDF, EPUB and Kindle. Book excerpt: 9th International Conference on Material and Manufacturing Technology (9th ICMMT 2018) Selected, peer reviewed papers from the 9th International Conference on Material and Manufacturing Technology (ICMMT 2018), April 28-30, 2018, Moscow, Russia
Download or read book Manufacturing Engineering Processes Second Edition written by Alting and published by CRC Press. This book was released on 1993-11-23 with total page 518 pages. Available in PDF, EPUB and Kindle. Book excerpt: Responding to the need for an integrated approach in manufacturing engineering oriented toward practical problem solving, this updated second edition describes a process morphology based on fundamental elements that can be applied to all manufacturing methods - providing a framework for classifying processes into major families with a common theoretical foundation. This work presents time-saving summaries of the various processing methods in data sheet form - permitting quick surveys for the production of specific components.;Delineating the actual level of computer applications in manufacturing, this work: creates the basis for synthesizing process development, tool and die design, and the design of production machinery; details the product life-cycle approach in manufacturing, emphasizing environmental, occupational health and resource impact consequences; introduces process planning and scheduling as an important part of industrial manufacturing; contains a completely revised and expanded section on ceramics and composites; furnishes new information on welding arc formation and maintenance; addresses the issue of industrial safety; and discusses progress in non-conventional processes such as laser processing, layer manufacturing, electrical discharge, electron beam, abrasive jet, ultrasonic and eltrochemical machining.;Revealing how manufacturing methods are adapted in industry practices, this work is intended for use by students of manufacturing engineering, industrial engineering and engineering design; and also for use as a self-study guide by manufacturing, mechanical, materials, industrial and design engineers.
Download or read book Manufacturing Process Design and Optimization written by Rhyder and published by CRC Press. This book was released on 1997-04-15 with total page 356 pages. Available in PDF, EPUB and Kindle. Book excerpt: This work presents the concepts of process design, problem identification, problem-solving and process optimization. It provides the basic tools needed to increase the consistency and profitability of manufacturing options, stressing the paradigms of improvement and emphasizing the hands-on use of tools furnished. The book introduces basic experimental design principles and avoids complicated statistical formulae.
Download or read book Recent Advances in Materials and Manufacturing Technologies written by P. Nageswara Rao and published by Trans Tech Publications Ltd. This book was released on 2019-08-30 with total page 942 pages. Available in PDF, EPUB and Kindle. Book excerpt: International Conference on Recent Advances in Materials and Manufacturing Technologies (ICRAMMT 2018) Selected, peer reviewed papers from the 2nd International Conference on Recent Advances in Materials and Manufacturing Technologies (ICRAMMT-2018), November 19-20, 2018, Hyderabad, India
Download or read book Material and Manufacturing Technology III written by K.M. Gupta and published by Trans Tech Publications Ltd. This book was released on 2012-07-09 with total page 920 pages. Available in PDF, EPUB and Kindle. Book excerpt: These 171 peer-reviewed papers, from the 3rd International Conference on Material and Manufacturing Technology (ICMMT 2012) held on the 5th and 6th May 2012 in Chengdu, China, are grouped into thirteen chapters: Novel Developments in Composites; Nanotechnology and Nanomaterials; Thermo-Mechanical and High Strain Rate Effects, and Energy Properties of Materials; Trends in Materials and Manufacturing; Deformation, Stress Analysis and Vibration; Applications of Finite Element Methods, Neural Networks and Fuzzy Techniques in Manufacturing; Numerically Controlled and Non-Conventional Machining; Fatigue, Fracture and Failure Analysis and Fault Diagnosis; Advancement in Manufacturing Technology; Virtual Design, Modeling, Simulation and Optimization; Computer Applications in Manufacturing and Analysis; Production Information Systems, Environment, Emission, and Combustion; Related Topics.
Download or read book Additive Manufacturing Materials Processes Quantifications and Applications written by Jing Zhang and published by Butterworth-Heinemann. This book was released on 2018-05-17 with total page 362 pages. Available in PDF, EPUB and Kindle. Book excerpt: Additive Manufacturing: Materials, Processes, Quantifications and Applications is designed to explain the engineering aspects and physical principles of available AM technologies and their most relevant applications. It begins with a review of the recent developments in this technology and then progresses to a discussion of the criteria needed to successfully select an AM technology for the embodiment of a particular design, discussing material compatibility, interfaces issues and strength requirements. The book concludes with a review of the applications in various industries, including bio, energy, aerospace and electronics. This book will be a must read for those interested in a practical, comprehensive introduction to additive manufacturing, an area with tremendous potential for producing high-value, complex, individually customized parts. As 3D printing technology advances, both in hardware and software, together with reduced materials cost and complexity of creating 3D printed items, these applications are quickly expanding into the mass market. Includes a discussion of the historical development and physical principles of current AM technologies Exposes readers to the engineering principles for evaluating and quantifying AM technologies Explores the uses of Additive Manufacturing in various industries, most notably aerospace, medical, energy and electronics
Download or read book Advanced Manufacturing Technologies written by Kapil Gupta and published by Springer. This book was released on 2017-04-29 with total page 294 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book provides details and collective information on working principle, process mechanism, salient features, and unique applications of various advanced manufacturing techniques and processes belong. The book is divided in three sessions covering modern machining methods, advanced repair and joining techniques and, finally, sustainable manufacturing. The latest trends and research aspects of those fields are highlighted.
Download or read book Materials and Manufacturing Processes written by Kaushik Kumar and published by Springer. This book was released on 2019-06-05 with total page 104 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book introduces the materials and traditional processes involved in the manufacturing industry. It discusses the properties and application of different engineering materials as well as the performance of failure tests. The book lists both destructible and non-destructible processes in detail. The design associated with each manufacturing processes, such Casting, Forming, Welding and Machining, are also covered.
Download or read book Materials Processing and Manufacturing Science written by Rajiv Asthana and published by Elsevier. This book was released on 2006-01-09 with total page 658 pages. Available in PDF, EPUB and Kindle. Book excerpt: “Materials Science in Manufacturing focuses on materials science and materials processing primarily for engineering and technology students preparing for careers in manufacturing. The text also serves as a useful reference on materials science for the practitioner engaged in manufacturing as well as the beginning graduate student.Integrates theoretical understanding and current practices to provide a resource for students preparing for advanced study or career in industry. Also serves as a useful resource to the practitioner who works with diverse materials and processes, but is not a specialist in materials science. This book covers a wider range of materials and processes than is customary in the elementary materials science books.This book covers a wider range of materials and processes than is customary in the elementary materials science books. * Detailed explanations of theories, concepts, principles and practices of materials and processes of manufacturing through richly illustrated text* Includes new topics such as nanomaterials and nanomanufacturing, not covered in most similar works* Focuses on the interrelationship between Materials Science, Processing Science, and Manufacturing Technology
Download or read book Advanced Materials and Manufacturing Processes written by Amar Patnaik and published by CRC Press. This book was released on 2021-10-14 with total page 294 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book discusses advanced materials and manufacturing processes with insights and overviews on tribology, automation, mechanical, biomedical, and aerospace engineering, as well as the optimization of industrial applications. The book explores the different types of composite materials while reporting on the design considerations and applications of each. Offering an overview of futuristic research areas, the book examines various engineering optimization and multi-criteria decision-making techniques and introduces a specific control framework used in analyzing processes. The book includes problem analyses and solving skills and covers different types of composite materials, their design considerations, and applications. This book is an informational resource for advanced undergraduate and graduate students, researchers, scholars, and field professionals, providing an update on the current advancements in the field of manufacturing processes.