Download or read book Manufacturing Technology written by Helmi A. Youssef and published by CRC Press. This book was released on 2023-08-17 with total page 972 pages. Available in PDF, EPUB and Kindle. Book excerpt: This new edition textbook provides comprehensive knowledge and insight into various aspects of manufacturing technology, processes, materials, tooling, and equipment. Its main objective is to introduce the grand spectrum of manufacturing technology to individuals who will be involved in the design and manufacturing of finished products and to provide them with basic information on manufacturing technologies. Manufacturing Technology: Materials, Processes, and Equipment, Second Edition, is written in a descriptive manner, where the emphasis is on the fundamentals of the process, its capabilities, typical applications, advantages, and limitations. Mathematical modeling and equations are used only when they enhance the basic understanding of the material dealt with. The book is a fundamental textbook that covers all the manufacturing processes, materials, and equipment used to convert the raw materials to a final product. It presents the materials used in manufacturing processes and covers the heat treatment processes, smelting of metals, and other technological processes such as casting, forming, powder metallurgy, joining processes, and surface technology. Manufacturing processes for polymers, ceramics, and composites are also covered. The book also covers surface technology, fundamentals of traditional and nontraditional machining processes, numerical control of machine tools, industrial robots and hexapods, additive manufacturing, and industry 4.0 technologies. The book is written specifically for undergraduates in industrial, manufacturing, mechanical, and materials engineering disciplines of the second to fourth levels to cover complete courses of manufacturing technology taught in engineering colleges and institutions all over the world. It also covers the needs of production and manufacturing engineers and technologists participating in related industries where it is expected to be part of their professional library. Additionally, the book can be used by students in other disciplines concerned with design and manufacturing, such as automotive and aerospace engineering.
Download or read book Advances in Manufacturing Technology written by Rupinder Singh and published by CRC Press. This book was released on 2022-03-11 with total page 200 pages. Available in PDF, EPUB and Kindle. Book excerpt: This cross-disciplinary book transcends departmental, institutional, industrial, public, and research organizations and goes beyond global barriers to cover the integration of research, education, and manufacturing in advanced materials processing and characterization, including CAD-CAM, Finite Element Analysis (FEA), and smart manufacturing. Advances in Manufacturing Technology: Computational Materials Processing and Characterization focuses on the design of experiment-based computational models, which involves FEA along with an ergonomics-based design of tooling for both conventional and nonconventional manufacturing processes. It discusses research, work, and recent developments in the field of production manufacturing of any mechanical system. Case studies and solved numerical solutions are included at the end of each chapter for easy reading comprehension. The book is helpful to those working on new developments in the field of product manufacturing. It also acts as a first-hand source of information for academic scholars and commercial manufacturers as they make strategic manufacturing development plans.
Download or read book Materials and Manufacturing An Introduction to How they Work and Why it Matters written by Mark Atwater and published by McGraw Hill Professional. This book was released on 2018-09-14 with total page 704 pages. Available in PDF, EPUB and Kindle. Book excerpt: A practical guide to materials and manufacturing concepts and applications Written in a straightforward, conversational style, this comprehensive textbook offers a hands-on introduction to materials science and manufacturing techniques. You will explore metallic and nonmetallic materials, their properties and applications, and how products are made from them, including traditional, additive, and advanced manufacturing methods. Materials and Manufacturing: An Introduction to How They Work and Why It Matters starts off by explaining materials science fundamentals and progresses to outline manufacturing processes in the order in which they are often employed. Coverage includes:•Metallic materials and processing•Nonmetallic materials and processing•Practical considerations in materials and manufacturing•Material structure, identification, and application•Compositional and property-based classification•Mechanical, thermal, and environmental concepts•Methods of testing materials•Sawing, broaching, filing, and abrasive machining•Milling, turning, boring, and hole making operations•Cohesive assembly through heat and chemical welding•Mechanical and adhesive assembly and finishing operations•The benefits and roles of additive and advanced manufacturing
Download or read book Materials and Manufacturing Processes written by Kaushik Kumar and published by Springer. This book was released on 2019-06-05 with total page 104 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book introduces the materials and traditional processes involved in the manufacturing industry. It discusses the properties and application of different engineering materials as well as the performance of failure tests. The book lists both destructible and non-destructible processes in detail. The design associated with each manufacturing processes, such Casting, Forming, Welding and Machining, are also covered.
Download or read book Manufacturing Processes written by H. N. Gupta and published by New Age International. This book was released on 2012-09 with total page 13 pages. Available in PDF, EPUB and Kindle. Book excerpt: Effective from 2008-09 session, U.P.T.U. has introduced the subject of manufacturing processes for first year engineering students of all streams. This textbook covers the entire course material in a distilled form.
Download or read book Manufacturing Technology for Aerospace Structural Materials written by Flake C Campbell Jr and published by Elsevier. This book was released on 2011-08-31 with total page 617 pages. Available in PDF, EPUB and Kindle. Book excerpt: The rapidly-expanding aerospace industry is a prime developer and user of advanced metallic and composite materials in its many products. This book concentrates on the manufacturing technology necessary to fabricate and assemble these materials into useful and effective structural components. Detailed chapters are dedicated to each key metal or alloy used in the industry, including aluminum, magnesium, beryllium, titanium, high strength steels, and superalloys. In addition the book deals with composites, adhesive bonding and presents the essentials of structural assembly. This book will be an important resource for all those involved in aerospace design and construction, materials science and engineering, as well as for metallurgists and those working in related sectors such as the automotive and mass transport industries. Flake Campbell Jr has over thirty seven years experience in the aerospace industry and is currently Senior Technical Fellow at the Boeing Phantom Works in Missouri, USA. * All major aerospace structural materials covered: metals and composites* Focus on details of manufacture and use* Author has huge experience in aerospace industry* A must-have book for materials engineers, design and structural engineers, metallurgical engineers and manufacturers for the aerospace industry
Download or read book Additive Manufacturing Materials Processes Quantifications and Applications written by Jing Zhang and published by Butterworth-Heinemann. This book was released on 2018-05-17 with total page 362 pages. Available in PDF, EPUB and Kindle. Book excerpt: Additive Manufacturing: Materials, Processes, Quantifications and Applications is designed to explain the engineering aspects and physical principles of available AM technologies and their most relevant applications. It begins with a review of the recent developments in this technology and then progresses to a discussion of the criteria needed to successfully select an AM technology for the embodiment of a particular design, discussing material compatibility, interfaces issues and strength requirements. The book concludes with a review of the applications in various industries, including bio, energy, aerospace and electronics. This book will be a must read for those interested in a practical, comprehensive introduction to additive manufacturing, an area with tremendous potential for producing high-value, complex, individually customized parts. As 3D printing technology advances, both in hardware and software, together with reduced materials cost and complexity of creating 3D printed items, these applications are quickly expanding into the mass market. Includes a discussion of the historical development and physical principles of current AM technologies Exposes readers to the engineering principles for evaluating and quantifying AM technologies Explores the uses of Additive Manufacturing in various industries, most notably aerospace, medical, energy and electronics
Download or read book Modern Manufacturing Technology written by Jitendra Kumar Katiyar and published by CRC Press. This book was released on 2021-12-03 with total page 118 pages. Available in PDF, EPUB and Kindle. Book excerpt: Modern Manufacturing Technology: Spotlight on Future summarizes the emergence and development of modern manufacturing techniques (MMTs) with a focus on metallic and advanced material-based additive manufacturing technologies and their potential applications. Further, it explores advanced machining techniques for production of novel nanomaterials. The book also covers modern sophisticated techniques for the fabrication of ultrafine electronic devices such as micro-electromechanical systems (MEMS), nano-electromechanical systems (NEMS), semiconductors, and optical systems. A dedicated chapter on manufacturing technology for Industry 4.0 is included. Features: Describes the background of manufacturing techniques in brief including the advent of and introduction to MMTs Reviews various types of MMTs established in recent years and their accelerated growth and development innovation-driven applications Overviews the physical and chemical techniques used for nanomaterials production Explores the fabrication mechanisms of MEMS, NEMS, semiconductors and optical devices Provides a conceptual overview of additive manufacturing technologies This book is geared to undergraduate and postgraduate students and professionals in mechanical and manufacturing engineering, and the manufacturing industry.
Download or read book Advanced Manufacturing Techniques for Engineering and Engineered Materials written by Thanigaivelan, R. and published by IGI Global. This book was released on 2022-03-11 with total page 351 pages. Available in PDF, EPUB and Kindle. Book excerpt: As technology advances, it is imperative to stay current in the newest developments made within the engineering industry and within material sciences. Trends in manufacturing such as 3D printing, casting, welding, surface modification, computer numerical control (CNC), non-traditional, Industry 4.0 ergonomics, and hybrid machining methods must be closely examined to utilize these important resources for the betterment of society. Advanced Manufacturing Techniques for Engineering and Engineered Materials provides a unified and complete overview about the recent and emerging trends, developments, and associated technology with scope for the commercialization of techniques specific to manufacturing materials. This book also reviews the various machining methods for difficult-to-cut materials and novel materials including matrix composites. Covering topics such as agro-waste, conventional machining, and material performance, this book is an essential resource for researchers, engineers, technologists, students and professors of higher education, industry workers, entrepreneurs, researchers, and academicians.
Download or read book Advanced Materials and Manufacturing Processes written by Amar Patnaik and published by CRC Press. This book was released on 2021-10-14 with total page 294 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book discusses advanced materials and manufacturing processes with insights and overviews on tribology, automation, mechanical, biomedical, and aerospace engineering, as well as the optimization of industrial applications. The book explores the different types of composite materials while reporting on the design considerations and applications of each. Offering an overview of futuristic research areas, the book examines various engineering optimization and multi-criteria decision-making techniques and introduces a specific control framework used in analyzing processes. The book includes problem analyses and solving skills and covers different types of composite materials, their design considerations, and applications. This book is an informational resource for advanced undergraduate and graduate students, researchers, scholars, and field professionals, providing an update on the current advancements in the field of manufacturing processes.
Download or read book Manufacturing Processes for Design Professionals written by Rob Thompson and published by Thames & Hudson. This book was released on 2007-11-30 with total page 528 pages. Available in PDF, EPUB and Kindle. Book excerpt: An encyclopaedic guide to production techniques and materials for product and industrial designers, engineers, and architects. Today's product designers are presented with a myriad of choices when creating their work and preparing it for manufacture. They have to be knowledgeable about a vast repertoire of processes, ranging from what used to be known as traditional "crafts" to the latest technology, to enable their designs to be manufactured effectively and efficiently. Information on the internet about such processes is often unreliable, and search engines do not usefully organize material for designers. This fundamental new resource explores innovative production techniques and materials that are having an impact on the design industry worldwide. Organized into four easily referenced parts—Forming, Cutting, Joining, and Finishing—over seventy manufacturing processes are explained in depth with full technical descriptions; analyses of the typical applications, design opportunities, and considerations each process offers; and information on cost, speed, and environmental impact. The accompanying step-by-step case studies look at a product or component being manufactured at a leading international supplier. A directory of more than fifty materials includes a detailed technical profile, images of typical applications and finishes, and an overview of each material's design characteristics. With some 1,200 color photographs and technical illustrations, specially commissioned for this book, this is the definitive reference for product designers, 3D designers, engineers, and architects who need a convenient, highly accessible, and practical reference.
Download or read book Materials for Additive Manufacturing written by Yusheng Shi and published by Academic Press. This book was released on 2021-02-12 with total page 776 pages. Available in PDF, EPUB and Kindle. Book excerpt: Materials for Additive Manufacturing covers the materials utilized in the additive manufacturing field, including polymers, metals, alloys and ceramic materials. A conceptual overview of the preparation and characterization of the materials and their processing is given, beginning with theoretical aspects that help readers better understand fundamental concepts. Emerging applications in medicine, aerospace, automotive, artwork and rapid manufacturing are also discussed. This book provides a comprehensive overview of materials, along with rapid prototyping technologies. Discusses the preparation and characterization of materials used for additive manufacturing Provides descriptions of microstructures and properties of the parts produced by additive manufacturing Includes recent industrial applications of materials processed in additive manufacturing
Download or read book Fabric Manufacturing Technology written by K. Thangamani and published by CRC Press. This book was released on 2022-04-04 with total page 204 pages. Available in PDF, EPUB and Kindle. Book excerpt: Fabric Manufacturing Technology: Weaving and Knitting gives the reader a brief idea about the processes involved in fabric formation methods, namely weaving and knitting. It includes various mechanisms involved beginning with primitive handlooms to the latest shuttleless looms, and from hand knitting to the ultra-modern electronic knitting machines. Various design aspects involved in producing the different types of woven and knitted fabrics are dealt with comprehensively. The techno-economics of the latest weaving and knitting machines have been described, including applications of woven and knitted fabrics in the medical field, automotive engineering, aeronautical engineering, protective clothing, and more. Features Covers the principles involved in the numerous operations of weaving and knitting processes Gives a basic understanding of fabric production, quality control and production Provides a summary of the fabric manufacturing process of weaving, knitting and nonwovens Discusses principles of mechanisms, as well as details of present-day machinery, with illustrations Explores the latest developments in knitting production by whole garment (Shima Seiki) and Knit and Wear (Stoll), CAD/CAM production and simulation of woven fabrics This book is aimed at senior undergraduate students in textile processing and fabric manufacturing.
Download or read book Manufacturing Techniques for Materials written by T.S. Srivatsan and published by CRC Press. This book was released on 2018-04-09 with total page 1171 pages. Available in PDF, EPUB and Kindle. Book excerpt: Manufacturing Techniques for Materials: Engineering and Engineered provides a cohesive and comprehensive overview of the following: (i) prevailing and emerging trends, (ii) emerging developments and related technology, and (iii) potential for the commercialization of techniques specific to manufacturing of materials. The first half of the book provides the interested reader with detailed chapters specific to the manufacturing of emerging materials, such as additive manufacturing, with a valued emphasis on the science, technology, and potentially viable practices specific to the manufacturing technique used. This section also attempts to discuss in a lucid and easily understandable manner the specific advantages and limitations of each technique and goes on to highlight all of the potentially viable and emerging technological applications. The second half of this archival volume focuses on a wide spectrum of conventional techniques currently available and being used in the manufacturing of both materials and resultant products. Manufacturing Techniques for Materials is an invaluable tool for a cross-section of readers including engineers, researchers, technologists, students at both the graduate level and undergraduate level, and even entrepreneurs.
Download or read book Manufacturing Processes and Materials Fourth Edition written by George F. Schrader and published by Society of Manufacturing Engineers. This book was released on 2000 with total page 866 pages. Available in PDF, EPUB and Kindle. Book excerpt: This best-selling textbook for major manufacturing engineering programs across the country masterfully covers the basic processes and machinery used in the job shop, tool room, or small manufacturing facility. At the same time, it describes advanced equipment and processes used in larger production environments. Questions and problems at the end of each chapter can be used as self-tests or assignments. An Instructor's Guide is available to tailor a more structured learning experience. Additional resources from SME, including the Fundamental Manufacturing Processes videotape series can also be used to supplement the book's learning objectives. With 31 chapters, 45 tables, 586 illustrations, 141 equations and an extensive index, Manufacturing Processes & Materials is one of the most comprehensive texts available on this subject.
Download or read book Advances in Manufacturing and Processing of Materials and Structures written by Yoseph Bar-Cohen and published by CRC Press. This book was released on 2018-09-03 with total page 845 pages. Available in PDF, EPUB and Kindle. Book excerpt: Advances in Manufacturing and Processing of Materials and Structures cover the latest advances in materials and structures in manufacturing and processing including additive and subtractive processes. It's intended to provide a compiled resource that reviews details of the advances that have been made in recent years in manufacturing and processing of materials and structures. A key development incorporated within this book is 3D printing, which is being used to produce complex parts including composites with odd shape fibers, as well as tissue and body organs. This book has been tailored for engineers, scientists and practitioners in different fields such as aerospace, mechanical engineering, materials science and biomedicine. Biomimetic principles have also been integrated. Features Provides the latest state-of-the art on different manufacturing processes, including a biomimetics viewpoint Offers broad coverage of advances in materials and manufacturing Written by chapter authors who are world-class researchers in their respective fields Provides in-depth presentation of the latest 3D and 4D technologies related to various manufacturing disciplines Provides substantial references in each chapter to enhance further study
Download or read book Additive Manufacturing of Metals The Technology Materials Design and Production written by Li Yang and published by Springer. This book was released on 2017-05-11 with total page 172 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book offers a unique guide to the three-dimensional (3D) printing of metals. It covers various aspects of additive, subtractive, and joining processes used to form three-dimensional parts with applications ranging from prototyping to production. Examining a variety of manufacturing technologies and their ability to produce both prototypes and functional production-quality parts, the individual chapters address metal components and discuss some of the important research challenges associated with the use of these technologies. As well as exploring the latest technologies currently under development, the book features unique sections on electron beam melting technology, material lifting, and the importance this science has in the engineering context. Presenting unique real-life case studies from industry, this book is also the first to offer the perspective of engineers who work in the field of aerospace and transportation systems, and who design components and manufacturing networks. Written by the leading experts in this field at universities and in industry, it provides a comprehensive textbook for students and an invaluable guide for practitioners