Download or read book Mastering Embedded Systems From Scratch written by keroles karam khalil khela shenouda and published by keroles karam khalil khela shenouda. This book was released on 2023-04-26 with total page 1884 pages. Available in PDF, EPUB and Kindle. Book excerpt: "Mastering Embedded Systems From Scratch " is an all-encompassing, inspiring, and captivating guide designed to elevate your engineering skills to new heights. This comprehensive resource offers an in-depth exploration of embedded systems engineering, from foundational principles to cutting-edge technologies and methodologies. Spanning 14 chapters, this exceptional book covers a wide range of topics, including microcontrollers, programming languages, communication protocols, software testing, ARM fundamentals, real-time operating systems (RTOS), automotive protocols, AUTOSAR, Embedded Linux, Adaptive AUTOSAR, and the Robot Operating System (ROS). With its engaging content and practical examples, this book will not only serve as a vital knowledge repository but also as an essential tool to catapult your career in embedded systems engineering. Each chapter is meticulously crafted to ensure that engineers have a solid understanding of the subject matter and can readily apply the concepts learned to real-world scenarios. The book combines theoretical knowledge with practical case studies and hands-on labs, providing engineers with the confidence to tackle complex projects and make the most of powerful technologies. "Mastering Embedded Systems From Scratch" is an indispensable resource for engineers seeking to broaden their expertise, improve their skills, and stay up-to-date with the latest advancements in the field of embedded systems. Whether you are a seasoned professional or just starting your journey, this book will serve as your ultimate guide to mastering embedded systems, preparing you to tackle the challenges of the industry with ease and finesse. Embark on this exciting journey and transform your engineering career with "Mastering Embedded Systems From Scratch" today! "Mastering Embedded Systems From Scratch" is your ultimate guide to becoming a professional embedded systems engineer. Curated from 24 authoritative references, this comprehensive book will fuel your passion and inspire success in the fast-paced world of embedded systems. Dive in and unleash your potential! Here are the chapters : Chapter 1: Introduction to Embedded System Chapter 2: C Programming Chapter 3: Embedded C Chapter 4: Data Structure/SW Design Chapter 5: Microcontroller Fundamentals Chapter 6: MCU Essential Peripherals Chapter 7: MCU Interfacing Chapter 8: SW Testing Chapter 9: ARM Fundamentals Chapter 10: RTOS Chapter 11: Automotive Protocols Chapter 12: Introduction to AUTOSAR Chapter 13: Introduction to Embedded Linux Chapter 14: Advanced Topics

Download or read book Mastering Embedded Linux Programming written by Frank Vasquez and published by Packt Publishing Ltd. This book was released on 2021-05-14 with total page 758 pages. Available in PDF, EPUB and Kindle. Book excerpt: Harness the power of Linux to create versatile and robust embedded solutions Key Features Learn how to develop and configure robust embedded Linux devices Explore the new features of Linux 5.4 and the Yocto Project 3.1 (Dunfell) Discover different ways to debug and profile your code in both user space and the Linux kernel Book DescriptionIf you’re looking for a book that will demystify embedded Linux, then you’ve come to the right place. Mastering Embedded Linux Programming is a fully comprehensive guide that can serve both as means to learn new things or as a handy reference. The first few chapters of this book will break down the fundamental elements that underpin all embedded Linux projects: the toolchain, the bootloader, the kernel, and the root filesystem. After that, you will learn how to create each of these elements from scratch and automate the process using Buildroot and the Yocto Project. As you progress, the book will show you how to implement an effective storage strategy for flash memory chips and install updates to a device remotely once it’s deployed. You’ll also learn about the key aspects of writing code for embedded Linux, such as how to access hardware from apps, the implications of writing multi-threaded code, and techniques to manage memory in an efficient way. The final chapters demonstrate how to debug your code, whether it resides in apps or in the Linux kernel itself. You’ll also cover the different tracers and profilers that are available for Linux so that you can quickly pinpoint any performance bottlenecks in your system. By the end of this Linux book, you’ll be able to create efficient and secure embedded devices using Linux.What you will learn Use Buildroot and the Yocto Project to create embedded Linux systems Troubleshoot BitBake build failures and streamline your Yocto development workflow Update IoT devices securely in the field using Mender or balena Prototype peripheral additions by reading schematics, modifying device trees, soldering breakout boards, and probing pins with a logic analyzer Interact with hardware without having to write kernel device drivers Divide your system up into services supervised by BusyBox runit Debug devices remotely using GDB and measure the performance of systems using tools such as perf, ftrace, eBPF, and Callgrind Who this book is for If you’re a systems software engineer or system administrator who wants to learn how to implement Linux on embedded devices, then this book is for you. It's also aimed at embedded systems engineers accustomed to programming for low-power microcontrollers, who can use this book to help make the leap to high-speed systems on chips that can run Linux. Anyone who develops hardware that needs to run Linux will find something useful in this book – but before you get started, you'll need a solid grasp on POSIX standard, C programming, and shell scripting.

Download or read book Making Embedded Systems written by Elecia White and published by "O'Reilly Media, Inc.". This book was released on 2011-10-25 with total page 329 pages. Available in PDF, EPUB and Kindle. Book excerpt: Interested in developing embedded systems? Since they donâ??t tolerate inefficiency, these systems require a disciplined approach to programming. This easy-to-read guide helps you cultivate a host of good development practices, based on classic software design patterns and new patterns unique to embedded programming. Learn how to build system architecture for processors, not operating systems, and discover specific techniques for dealing with hardware difficulties and manufacturing requirements. Written by an expert whoâ??s created embedded systems ranging from urban surveillance and DNA scanners to childrenâ??s toys, this book is ideal for intermediate and experienced programmers, no matter what platform you use. Optimize your system to reduce cost and increase performance Develop an architecture that makes your software robust in resource-constrained environments Explore sensors, motors, and other I/O devices Do more with less: reduce RAM consumption, code space, processor cycles, and power consumption Learn how to update embedded code directly in the processor Discover how to implement complex mathematics on small processors Understand what interviewers look for when you apply for an embedded systems job "Making Embedded Systems is the book for a C programmer who wants to enter the fun (and lucrative) world of embedded systems. Itâ??s very well writtenâ??entertaining, evenâ??and filled with clear illustrations." â??Jack Ganssle, author and embedded system expert.

Download or read book Mastering Embedded Linux Programming written by Chris Simmonds and published by Packt Publishing Ltd. This book was released on 2017-06-30 with total page 468 pages. Available in PDF, EPUB and Kindle. Book excerpt: Master the techniques needed to build great, efficient embedded devices on Linux About This Book Discover how to build and configure reliable embedded Linux devices This book has been updated to include Linux 4.9 and Yocto Project 2.2 (Morty) This comprehensive guide covers the remote update of devices in the field and power management Who This Book Is For If you are an engineer who wishes to understand and use Linux in embedded devices, this book is for you. It is also for Linux developers and system programmers who are familiar with embedded systems and want to learn and program the best in class devices. It is appropriate for students studying embedded techniques, for developers implementing embedded Linux devices, and engineers supporting existing Linux devices. What You Will Learn Evaluate the Board Support Packages offered by most manufacturers of a system on chip or embedded module Use Buildroot and the Yocto Project to create embedded Linux systems quickly and efficiently Update IoT devices in the field without compromising security Reduce the power budget of devices to make batteries last longer Interact with the hardware without having to write kernel device drivers Debug devices remotely using GDB, and see how to measure the performance of the systems using powerful tools such as perk, ftrace, and valgrind Find out how to configure Linux as a real-time operating system In Detail Embedded Linux runs many of the devices we use every day, from smart TVs to WiFi routers, test equipment to industrial controllers - all of them have Linux at their heart. Linux is a core technology in the implementation of the inter-connected world of the Internet of Things. The comprehensive guide shows you the technologies and techniques required to build Linux into embedded systems. You will begin by learning about the fundamental elements that underpin all embedded Linux projects: the toolchain, the bootloader, the kernel, and the root filesystem. You'll see how to create each of these elements from scratch, and how to automate the process using Buildroot and the Yocto Project. Moving on, you'll find out how to implement an effective storage strategy for flash memory chips, and how to install updates to the device remotely once it is deployed. You'll also get to know the key aspects of writing code for embedded Linux, such as how to access hardware from applications, the implications of writing multi-threaded code, and techniques to manage memory in an efficient way. The final chapters show you how to debug your code, both in applications and in the Linux kernel, and how to profile the system so that you can look out for performance bottlenecks. By the end of the book, you will have a complete overview of the steps required to create a successful embedded Linux system. Style and approach This book is an easy-to-follow and pragmatic guide with in-depth analysis of the implementation of embedded devices. It follows the life cycle of a project from inception through to completion, at each stage giving both the theory that underlies the topic and practical step-by-step walkthroughs of an example implementation.

Download or read book Programming Embedded Systems written by Michael Barr and published by "O'Reilly Media, Inc.". This book was released on 2006-10-11 with total page 326 pages. Available in PDF, EPUB and Kindle. Book excerpt: Authored by two of the leading authorities in the field, this guide offers readers the knowledge and skills needed to achieve proficiency with embedded software.

Download or read book An Embedded Software Primer written by David E. Simon and published by Addison-Wesley Professional. This book was released on 1999 with total page 460 pages. Available in PDF, EPUB and Kindle. Book excerpt: Simon introduces the broad range of applications for embedded software and then reviews each major issue facing developers, offering practical solutions, techniques, and good habits that apply no matter which processor, real-time operating systems, methodology, or application is used.

Download or read book Programming Embedded Systems in C and C written by Michael Barr and published by "O'Reilly Media, Inc.". This book was released on 1999 with total page 206 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book introduces embedded systems to C and C++ programmers. Topics include testing memory devices, writing and erasing flash memory, verifying nonvolatile memory contents, controlling on-chip peripherals, device driver design and implementation, and more.

Download or read book Embedded Linux Primer written by Christopher Hallinan and published by Pearson Education. This book was released on 2010-10-26 with total page 738 pages. Available in PDF, EPUB and Kindle. Book excerpt: Up-to-the-Minute, Complete Guidance for Developing Embedded Solutions with Linux Linux has emerged as today’s #1 operating system for embedded products. Christopher Hallinan’s Embedded Linux Primer has proven itself as the definitive real-world guide to building efficient, high-value, embedded systems with Linux. Now, Hallinan has thoroughly updated this highly praised book for the newest Linux kernels, capabilities, tools, and hardware support, including advanced multicore processors. Drawing on more than a decade of embedded Linux experience, Hallinan helps you rapidly climb the learning curve, whether you’re moving from legacy environments or you’re new to embedded programming. Hallinan addresses today’s most important development challenges and demonstrates how to solve the problems you’re most likely to encounter. You’ll learn how to build a modern, efficient embedded Linux development environment, and then utilize it as productively as possible. Hallinan offers up-to-date guidance on everything from kernel configuration and initialization to bootloaders, device drivers to file systems, and BusyBox utilities to real-time configuration and system analysis. This edition adds entirely new chapters on UDEV, USB, and open source build systems. Tour the typical embedded system and development environment and understand its concepts and components. Understand the Linux kernel and userspace initialization processes. Preview bootloaders, with specific emphasis on U-Boot. Configure the Memory Technology Devices (MTD) subsystem to interface with flash (and other) memory devices. Make the most of BusyBox and latest open source development tools. Learn from expanded and updated coverage of kernel debugging. Build and analyze real-time systems with Linux. Learn to configure device files and driver loading with UDEV. Walk through detailed coverage of the USB subsystem. Introduces the latest open source embedded Linux build systems. Reference appendices include U-Boot and BusyBox commands.

Download or read book Mastering Embedded Linux Programming written by Chris Simmonds and published by . This book was released on 2017 with total page pages. Available in PDF, EPUB and Kindle. Book excerpt:

Download or read book Building Embedded Linux Systems written by Karim Yaghmour and published by "O'Reilly Media, Inc.". This book was released on 2003-04-22 with total page 419 pages. Available in PDF, EPUB and Kindle. Book excerpt: Linux® is being adopted by an increasing number of embedded systems developers, who have been won over by its sophisticated scheduling and networking, its cost-free license, its open development model, and the support offered by rich and powerful programming tools. While there is a great deal of hype surrounding the use of Linux in embedded systems, there is not a lot of practical information. Building Embedded Linux Systems is the first in-depth, hard-core guide to putting together an embedded system based on the Linux kernel. This indispensable book features arcane and previously undocumented procedures for: Building your own GNU development toolchain Using an efficient embedded development framework Selecting, configuring, building, and installing a target-specific kernel Creating a complete target root filesystem Setting up, manipulating, and using solid-state storage devices Installing and configuring a bootloader for the target Cross-compiling a slew of utilities and packages Debugging your embedded system using a plethora of tools and techniques Details are provided for various target architectures and hardware configurations, including a thorough review of Linux's support for embedded hardware. All explanations rely on the use of open source and free software packages. By presenting how to build the operating system components from pristine sources and how to find more documentation or help, this book greatly simplifies the task of keeping complete control over one's embedded operating system, whether it be for technical or sound financial reasons.Author Karim Yaghmour, a well-known designer and speaker who is responsible for the Linux Trace Toolkit, starts by discussing the strengths and weaknesses of Linux as an embedded operating system. Licensing issues are included, followed by a discussion of the basics of building embedded Linux systems. The configuration, setup, and use of over forty different open source and free software packages commonly used in embedded Linux systems are also covered. uClibc, BusyBox, U-Boot, OpenSSH, thttpd, tftp, strace, and gdb are among the packages discussed.

Download or read book Hands On RTOS with Microcontrollers written by Brian Amos and published by Packt Publishing Ltd. This book was released on 2020-05-15 with total page 479 pages. Available in PDF, EPUB and Kindle. Book excerpt: Build a strong foundation in designing and implementing real-time systems with the help of practical examples Key Features Get up and running with the fundamentals of RTOS and apply them on STM32 Enhance your programming skills to design and build real-world embedded systems Get to grips with advanced techniques for implementing embedded systems Book DescriptionA real-time operating system (RTOS) is used to develop systems that respond to events within strict timelines. Real-time embedded systems have applications in various industries, from automotive and aerospace through to laboratory test equipment and consumer electronics. These systems provide consistent and reliable timing and are designed to run without intervention for years. This microcontrollers book starts by introducing you to the concept of RTOS and compares some other alternative methods for achieving real-time performance. Once you've understood the fundamentals, such as tasks, queues, mutexes, and semaphores, you'll learn what to look for when selecting a microcontroller and development environment. By working through examples that use an STM32F7 Nucleo board, the STM32CubeIDE, and SEGGER debug tools, including SEGGER J-Link, Ozone, and SystemView, you'll gain an understanding of preemptive scheduling policies and task communication. The book will then help you develop highly efficient low-level drivers and analyze their real-time performance and CPU utilization. Finally, you'll cover tips for troubleshooting and be able to take your new-found skills to the next level. By the end of this book, you'll have built on your embedded system skills and will be able to create real-time systems using microcontrollers and FreeRTOS.What you will learn Understand when to use an RTOS for a project Explore RTOS concepts such as tasks, mutexes, semaphores, and queues Discover different microcontroller units (MCUs) and choose the best one for your project Evaluate and select the best IDE and middleware stack for your project Use professional-grade tools for analyzing and debugging your application Get FreeRTOS-based applications up and running on an STM32 board Who this book is for This book is for embedded engineers, students, or anyone interested in learning the complete RTOS feature set with embedded devices. A basic understanding of the C programming language and embedded systems or microcontrollers will be helpful.

Download or read book Introduction to Embedded Systems Second Edition written by Edward Ashford Lee and published by MIT Press. This book was released on 2017-01-06 with total page 562 pages. Available in PDF, EPUB and Kindle. Book excerpt: An introduction to the engineering principles of embedded systems, with a focus on modeling, design, and analysis of cyber-physical systems. The most visible use of computers and software is processing information for human consumption. The vast majority of computers in use, however, are much less visible. They run the engine, brakes, seatbelts, airbag, and audio system in your car. They digitally encode your voice and construct a radio signal to send it from your cell phone to a base station. They command robots on a factory floor, power generation in a power plant, processes in a chemical plant, and traffic lights in a city. These less visible computers are called embedded systems, and the software they run is called embedded software. The principal challenges in designing and analyzing embedded systems stem from their interaction with physical processes. This book takes a cyber-physical approach to embedded systems, introducing the engineering concepts underlying embedded systems as a technology and as a subject of study. The focus is on modeling, design, and analysis of cyber-physical systems, which integrate computation, networking, and physical processes. The second edition offers two new chapters, several new exercises, and other improvements. The book can be used as a textbook at the advanced undergraduate or introductory graduate level and as a professional reference for practicing engineers and computer scientists. Readers should have some familiarity with machine structures, computer programming, basic discrete mathematics and algorithms, and signals and systems.

Download or read book The Hardware Hacking Handbook written by Jasper van Woudenberg and published by No Starch Press. This book was released on 2021-12-21 with total page 514 pages. Available in PDF, EPUB and Kindle. Book excerpt: The Hardware Hacking Handbook takes you deep inside embedded devices to show how different kinds of attacks work, then guides you through each hack on real hardware. Embedded devices are chip-size microcomputers small enough to be included in the structure of the object they control, and they’re everywhere—in phones, cars, credit cards, laptops, medical equipment, even critical infrastructure. This means understanding their security is critical. The Hardware Hacking Handbook takes you deep inside different types of embedded systems, revealing the designs, components, security limits, and reverse-engineering challenges you need to know for executing effective hardware attacks. Written with wit and infused with hands-on lab experiments, this handbook puts you in the role of an attacker interested in breaking security to do good. Starting with a crash course on the architecture of embedded devices, threat modeling, and attack trees, you’ll go on to explore hardware interfaces, ports and communication protocols, electrical signaling, tips for analyzing firmware images, and more. Along the way, you’ll use a home testing lab to perform fault-injection, side-channel (SCA), and simple and differential power analysis (SPA/DPA) attacks on a variety of real devices, such as a crypto wallet. The authors also share insights into real-life attacks on embedded systems, including Sony’s PlayStation 3, the Xbox 360, and Philips Hue lights, and provide an appendix of the equipment needed for your hardware hacking lab – like a multimeter and an oscilloscope – with options for every type of budget. You’ll learn: How to model security threats, using attacker profiles, assets, objectives, and countermeasures Electrical basics that will help you understand communication interfaces, signaling, and measurement How to identify injection points for executing clock, voltage, electromagnetic, laser, and body-biasing fault attacks, as well as practical injection tips How to use timing and power analysis attacks to extract passwords and cryptographic keys Techniques for leveling up both simple and differential power analysis, from practical measurement tips to filtering, processing, and visualization Whether you’re an industry engineer tasked with understanding these attacks, a student starting out in the field, or an electronics hobbyist curious about replicating existing work, The Hardware Hacking Handbook is an indispensable resource – one you’ll always want to have onhand.

Download or read book Building Embedded Systems written by Changyi Gu and published by Apress. This book was released on 2016-05-26 with total page 337 pages. Available in PDF, EPUB and Kindle. Book excerpt: Develop the software and hardware you never think about. We're talking about the nitty-gritty behind the buttons on your microwave, inside your thermostat, inside the keyboard used to type this description, and even running the monitor on which you are reading it now. Such stuff is termed embedded systems, and this book shows how to design and develop embedded systems at a professional level. Because yes, many people quietly make a successful career doing just that. Building embedded systems can be both fun and intimidating. Putting together an embedded system requires skill sets from multiple engineering disciplines, from software and hardware in particular. Building Embedded Systems is a book about helping you do things in the right way from the beginning of your first project: Programmers who know software will learn what they need to know about hardware. Engineers with hardware knowledge likewise will learn about the software side. Whatever your background is, Building Embedded Systems is the perfect book to fill in any knowledge gaps and get you started in a career programming for everyday devices. Author Changyi Gu brings more than fifteen years of experience in working his way up the ladder in the field of embedded systems. He brings knowledge of numerous approaches to embedded systems design, including the System on Programmable Chips (SOPC) approach that is currently growing to dominate the field. His knowledge and experience make Building Embedded Systems an excellent book for anyone wanting to enter the field, or even just to do some embedded programming as a side project. What You Will Learn Program embedded systems at the hardware level Learn current industry practices in firmware development Develop practical knowledge of embedded hardware options Create tight integration between software and hardware Practice a work flow leading to successful outcomes Build from transistor level to the system level Make sound choices between performance and cost Who This Book Is For Embedded-system engineers and intermediate electronics enthusiasts who are seeking tighter integration between software and hardware. Those who favor the System on a Programmable Chip (SOPC) approach will in particular benefit from this book. Students in both Electrical Engineering and Computer Science can also benefit from this book and the real-life industry practice it provides.

Download or read book Practical C Programming written by Steve Oualline and published by "O'Reilly Media, Inc.". This book was released on 2002-12-13 with total page 576 pages. Available in PDF, EPUB and Kindle. Book excerpt: C++ is a powerful, highly flexible, and adaptable programming language that allows software engineers to organize and process information quickly and effectively. But this high-level language is relatively difficult to master, even if you already know the C programming language.The 2nd edition of Practical C++ Programming is a complete introduction to the C++ language for programmers who are learning C++. Reflecting the latest changes to the C++ standard, this 2nd edition takes a useful down-to-earth approach, placing a strong emphasis on how to design clean, elegant code.In short, to-the-point chapters, all aspects of programming are covered including style, software engineering, programming design, object-oriented design, and debugging. It also covers common mistakes and how to find (and avoid) them. End of chapter exercises help you ensure you've mastered the material.Practical C++ Programming thoroughly covers: C++ Syntax Coding standards and style Creation and use of object classes Templates Debugging and optimization Use of the C++ preprocessor File input/output Steve Oualline's clear, easy-going writing style and hands-on approach to learning make Practical C++ Programming a nearly painless way to master this complex but powerful programming language.

Download or read book Real Time Embedded Systems written by Xiaocong Fan and published by Newnes. This book was released on 2015-02-25 with total page 687 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book integrates new ideas and topics from real time systems, embedded systems, and software engineering to give a complete picture of the whole process of developing software for real-time embedded applications. You will not only gain a thorough understanding of concepts related to microprocessors, interrupts, and system boot process, appreciating the importance of real-time modeling and scheduling, but you will also learn software engineering practices such as model documentation, model analysis, design patterns, and standard conformance. This book is split into four parts to help you learn the key concept of embedded systems; Part one introduces the development process, and includes two chapters on microprocessors and interrupts---fundamental topics for software engineers; Part two is dedicated to modeling techniques for real-time systems; Part three looks at the design of software architectures and Part four covers software implementations, with a focus on POSIX-compliant operating systems. With this book you will learn: The pros and cons of different architectures for embedded systems POSIX real-time extensions, and how to develop POSIX-compliant real time applications How to use real-time UML to document system designs with timing constraints The challenges and concepts related to cross-development Multitasking design and inter-task communication techniques (shared memory objects, message queues, pipes, signals) How to use kernel objects (e.g. Semaphores, Mutex, Condition variables) to address resource sharing issues in RTOS applications The philosophy underpinning the notion of "resource manager" and how to implement a virtual file system using a resource manager The key principles of real-time scheduling and several key algorithms Coverage of the latest UML standard (UML 2.4) Over 20 design patterns which represent the best practices for reuse in a wide range of real-time embedded systems Example codes which have been tested in QNX---a real-time operating system widely adopted in industry

Download or read book Architecting High Performance Embedded Systems written by Jim Ledin and published by Packt Publishing Ltd. This book was released on 2021-02-05 with total page 376 pages. Available in PDF, EPUB and Kindle. Book excerpt: Explore the complete process of developing systems based on field-programmable gate arrays (FPGAs), including the design of electronic circuits and the construction and debugging of prototype embedded devices Key FeaturesLearn the basics of embedded systems and real-time operating systemsUnderstand how FPGAs implement processing algorithms in hardwareDesign, construct, and debug custom digital systems from scratch using KiCadBook Description Modern digital devices used in homes, cars, and wearables contain highly sophisticated computing capabilities composed of embedded systems that generate, receive, and process digital data streams at rates up to multiple gigabits per second. This book will show you how to use Field Programmable Gate Arrays (FPGAs) and high-speed digital circuit design to create your own cutting-edge digital systems. Architecting High-Performance Embedded Systems takes you through the fundamental concepts of embedded systems, including real-time operation and the Internet of Things (IoT), and the architecture and capabilities of the latest generation of FPGAs. Using powerful free tools for FPGA design and electronic circuit design, you'll learn how to design, build, test, and debug high-performance FPGA-based IoT devices. The book will also help you get up to speed with embedded system design, circuit design, hardware construction, firmware development, and debugging to produce a high-performance embedded device – a network-based digital oscilloscope. You'll explore techniques such as designing four-layer printed circuit boards with high-speed differential signal pairs and assembling the board using surface-mount components. By the end of the book, you'll have a solid understanding of the concepts underlying embedded systems and FPGAs and will be able to design and construct your own sophisticated digital devices. What you will learnUnderstand the fundamentals of real-time embedded systems and sensorsDiscover the capabilities of FPGAs and how to use FPGA development toolsLearn the principles of digital circuit design and PCB layout with KiCadConstruct high-speed circuit board prototypes at low costDesign and develop high-performance algorithms for FPGAsDevelop robust, reliable, and efficient firmware in CThoroughly test and debug embedded device hardware and firmwareWho this book is for This book is for software developers, IoT engineers, and anyone who wants to understand the process of developing high-performance embedded systems. You'll also find this book useful if you want to learn about the fundamentals of FPGA development and all aspects of firmware development in C and C++. Familiarity with the C language, digital circuits, and electronic soldering is necessary to get started.