Download or read book Masonry Structures written by Robert G. Drysdale and published by . This book was released on 1999 with total page 928 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Design of Masonry Structures written by A.W. Hendry and published by CRC Press. This book was released on 2017-10-02 with total page 271 pages. Available in PDF, EPUB and Kindle. Book excerpt: This edition has been fully revised and extended to cover blockwork and Eurocode 6 on masonry structures. This valued textbook:Discusses all aspects of design of masonry structures in plain and reinforced masonry.summarizes materials properties and structural principles as well as describing structure and content of codes.Presents design procedures
Download or read book Masonry Structural Design written by Richard E. Klingner and published by McGraw Hill Professional. This book was released on 2010-02-08 with total page 589 pages. Available in PDF, EPUB and Kindle. Book excerpt: A Complete Guide to Masonry Materials and Structural Design Written by the former chair of the Masonry Standards Joint Committee (MSJC), this authoritative volume covers the design of masonry structures using the 2009 International Building Code and the 2008 MSJC Code and Specification. Masonry Structural Design emphasizes the strength design of masonry and includes allowable-stress provisions. Innovations such as autoclaved aerated concrete masonry (AAC) are also discussed. Real-world case studies featuring a low-rise building with reinforced concrete masonry and a four-story building with clay masonry illustrate the techniques presented in this comprehensive resource. Coverage includes: Basic structural behavior and design of low-rise, bearing wall buildings Materials used in masonry construction Code basis for structural design of masonry buildings, including seismic design Introduction of MSJC treatment of structural design Strength design of reinforced and unreinforced masonry elements Allowable-stress design of reinforced and unreinforced masonry elements Comparison of design by the allowable-stress approach versus the strength approach Lateral load analysis of shear wall structure Design and detailing of floor and roof diaphragms
Download or read book Long term Performance and Durability of Masonry Structures written by Bahman Ghiassi and published by Woodhead Publishing. This book was released on 2018-11-27 with total page 422 pages. Available in PDF, EPUB and Kindle. Book excerpt: Long-Term Performance and Durability of Masonry Structures: Degradation Mechanisms, Health Monitoring and Service Life Design focuses on the long-term performance of masonry and historical structures. The book covers a wide range of related topics, including degradation mechanisms in different masonry types, structural health monitoring techniques, and long-term performance and service life design approaches. Each chapter reflects recent findings and the state-of-the-art, providing practical guidelines. Key topics covered include the theoretical background, transport properties, testing and modeling, protective measures and standards and codes. The book's focus is on individual construction materials, the composite system and structural performance. Covers all issues related to durability, including degradation mechanisms, testing and design, monitoring and service life design Focuses on different masonry construction types Presents a ‘one-stop’ reference for advanced postgraduate courses that focuses on the durability of masonry and historical constructions
Download or read book Mechanics of Masonry Structures written by Maurizio Angelillo and published by Springer Science & Business Media. This book was released on 2014-03-20 with total page 350 pages. Available in PDF, EPUB and Kindle. Book excerpt: The experience of people working with different perspectives in different fields of masonry modeling, from mathematics to applied engineering and practice, is brought together in this book. It presents both the theoretical background and an overview of the state-of-the-art in static and dynamic masonry modeling.
Download or read book Simplified Design of Masonry Structures written by James Ambrose and published by John Wiley & Sons. This book was released on 1997-02-20 with total page 218 pages. Available in PDF, EPUB and Kindle. Book excerpt: A complete, accessible introduction to structural masonryfundamentals. This practical volume provides a thorough grounding in the designof masonry structures for buildings --with clear and easy-to-graspcoverage of basic materials, construction systems, building codes,industry standards, and simple computations for structural elementsof commonly used forms of masonry. Well-written and carefullyorganized, the book: * Includes all principal types of masonry materials: brick, stone,fired clay, concrete block, glass block, and more * Contains information on unreinforced, reinforced, and veneeredconstruction * Examines key design criteria: dead loads, live loads, lateralloads, structural planning, building code requirements, andperformance measurement * Features helpful study aids --including exercises and solutions,glossary of terms, bibliography, and detailed appendices. Requiring only minimal prior experience in engineering analysis ordesign, Simplified Design of Masonry Structures is ideal forself-study or classroom use. It is an essential reference forarchitecture and engineering students and professionals.
Download or read book Numerical Modeling of Masonry and Historical Structures written by Bahman Ghiassi and published by Woodhead Publishing. This book was released on 2019-06-15 with total page 890 pages. Available in PDF, EPUB and Kindle. Book excerpt: Numerical Modeling of Masonry and Historical Structures: From Theory to Application provides detailed information on the theoretical background and practical guidelines for numerical modeling of unreinforced and reinforced (strengthened) masonry and historical structures. The book consists of four main sections, covering seismic vulnerability analysis of masonry and historical structures, numerical modeling of unreinforced masonry, numerical modeling of FRP-strengthened masonry, and numerical modeling of TRM-strengthened masonry. Each section reflects the theoretical background and current state-of-the art, providing practical guidelines for simulations and the use of input parameters. Covers important issues relating to advanced methodologies for the seismic vulnerability assessment of masonry and historical structures Focuses on modeling techniques used for the nonlinear analysis of unreinforced masonry and strengthened masonry structures Follows a theory to practice approach
Download or read book Structural Masonry written by Arnold W Hendry and published by Palgrave. This book was released on 2013-12-31 with total page 312 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Masonry Construction in Active Seismic Regions written by Rajesh Rupakhety and published by Woodhead Publishing. This book was released on 2021-05-12 with total page 482 pages. Available in PDF, EPUB and Kindle. Book excerpt: During earthquakes, masonry buildings are the most affected, and consequently, damage to these buildings leads to massive loss of life and property. Masonry buildings comprise probably the greatest share of overall housing stock, and in turn, understanding their performance during earthquakes is a pivotal problem in seismic regions. Masonry Construction in Active Seismic Regions presents details on the kinds of masonry building found in seismic regions of the world. The title describes interventions, such as retrofitted solutions, dynamic identification, and improved construction after earthquakes, that are equally applicable to regions of moderate and high seismicity. The book covers representative masonry buildings from active seismic regions, the material properties of masonry construction, numerical modelling techniques and computational advances, seismic performance of non-engineered masonry buildings, resilience in typical construction, retrofitting, and the cultural values and structural characterization of heritage masonry buildings in active seismic regions. This book is unique in its global and systematic coverage of masonry construction in seismic regions. Identifies the material properties of masonry construction from a seismic perspective Covers representative masonry buildings from active seismic regions, providing a benchmark to understand existing building stocks Provides numerical modelling techniques and reviews computational advances, including a large test database Details the seismic performance of non-engineered masonry buildings, as well as the cultural values and structural characterisation of heritage masonry constructions Analyses typical or vernacular constructions which have earthquake resilient features, such as Dhajji-Dewari, Borbone, Pombalino, and Himis
Download or read book Design of Reinforced Masonry Structures written by Narendra Taly and published by McGraw Hill Professional. This book was released on 2010-06-05 with total page 753 pages. Available in PDF, EPUB and Kindle. Book excerpt: The Definitive Guide to Designing Reinforced Masonry Structures Fully updated to the 2009 International Building Code (2009 IBC) and the 2008 Masonry Standards Joint Committee (MSJC-08), Design of Reinforced Masonry Structures, second edition, presents the latest methods for designing strong, safe, and economical structures with reinforced masonry. The book is packed with more than 425 illustrations and a wealth of new, detailed examples. This state-of-the-art guide features strength design philosophy for reinforced masonry structures based on ASCE 7-05 design loads for wind and seismic design. Written by an internationally acclaimed author, this essential professional tool takes you step-by-step through the art, science, and engineering of reinforced masonry structures. COVERAGE INCLUDES: Masonry units and their applications Materials of masonry construction Flexural analysis and design Columns Walls under gravity and transverse loads Shear walls Retaining and subterranean walls General design and construction considerations Anchorage to masonry Design aids and tables
Download or read book Maintenance of Brick and Stone Masonry Structures written by A.M. Sowden and published by CRC Press. This book was released on 2020-08-27 with total page 468 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book deals with all the tasks related to brick and stone masonry structures, from the initial identification of defects and their diagnosis to their treatment and monitoring of its cost-effectiveness. It is written in the context of bridges and their associated retaining walls in the U.K.
Download or read book Design of Masonry Structures written by A.W. Hendry and published by CRC Press. This book was released on 2017-10-02 with total page 286 pages. Available in PDF, EPUB and Kindle. Book excerpt: This edition has been fully revised and extended to cover blockwork and Eurocode 6 on masonry structures. This valued textbook:Discusses all aspects of design of masonry structures in plain and reinforced masonry.summarizes materials properties and structural principles as well as describing structure and content of codes.Presents design procedures
Download or read book Computational Modeling of Masonry Structures Using the Discrete Element Method written by Sarhosis, Vasilis and published by IGI Global. This book was released on 2016-06-09 with total page 505 pages. Available in PDF, EPUB and Kindle. Book excerpt: The Discrete Element Method (DEM) has emerged as a solution to predicting load capacities of masonry structures. As one of many numerical methods and computational solutions being applied to evaluate masonry structures, further research on DEM tools and methodologies is essential for further advancement. Computational Modeling of Masonry Structures Using the Discrete Element Method explores the latest digital solutions for the analysis and modeling of brick, stone, concrete, granite, limestone, and glass block structures. Focusing on critical research on mathematical and computational methods for masonry analysis, this publication is a pivotal reference source for scholars, engineers, consultants, and graduate-level engineering students.
Download or read book Statics of Historic Masonry Constructions written by Mario Como and published by Springer Science & Business Media. This book was released on 2012-12-14 with total page 596 pages. Available in PDF, EPUB and Kindle. Book excerpt: Masonry constructions are the great majority of the buildings in Europe’s historical centres and the most important monuments in its architectural heritage and the demand for their safety assessments and restoration projects is pressing and constant. Nevertheless, there is a lack of a widely accepted approach to studying the statics of masonry structures. This book aims to help fill these gaps by presenting a new comprehensive, unified theory of statics of masonry constructions. The book, result of thirty years of research and professional experience, through an interdisciplinary approach combining engineering, architecture, advances from the simple to the complex and analyses statics of a large variety of masonry constructions, as arches, domes, cross and cloister vaults, piers, towers, cathedrals and buildings under seismic actions.
Download or read book Structural Restoration of Masonry Monuments written by George G. Penelis and published by CRC Press. This book was released on 2020-01-31 with total page 456 pages. Available in PDF, EPUB and Kindle. Book excerpt: Historic structures need to be restored in line with international guidance and charters developed by architects and archaeologists, but technical understanding of structural engineering and materials is crucial, particularly with respect to response to earthquake loading. This guide to structural assessment and restoration of masonry monuments and historical buildings outlines the techniques, materials and design procedures used. It begins with principles, theory and practice and then presents case studies. The assessment focusses on Building materials and construction techniques used in the past The mechanics of masonry The structural behaviour of masonry monuments and historical buildings In-situ investigation and laboratory tests for existing and restoration materials. The restoration elaborates on Techniques and materials available for structural restoration Structural analysis and design Deciding on the restoration scheme Emergency measures and protective measures.
Download or read book Building Code Requirements and Specification for Masonry Structures written by Masonry Standards Joint Committee Staff and published by . This book was released on 2013 with total page pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Basics Masonry Construction written by Nils Kummer and published by Birkhäuser. This book was released on 2017-05-22 with total page 70 pages. Available in PDF, EPUB and Kindle. Book excerpt: Masonry construction is usually the first building exercise the student encounters in his or her training. This volume elaborates the fundamental principles of scale, construction, and assembly of building components using simple masonry structures as examples. Themes: Materials and measurements Building physics and load-bearing structures Typical bonds Building components Execution of masonry structures
