Download or read book Maritime Technology and Engineering written by Carlos Guedes Soares and published by CRC Press. This book was released on 2014-09-30 with total page 1450 pages. Available in PDF, EPUB and Kindle. Book excerpt: Maritime Technology and Engineering includes the papers presented at the 2nd International Conference on Maritime Technology and Engineering (MARTECH 2014, Lisbon, Portugal, 15-17 October 2014). The contributions reflect the internationalization of the maritime sector, and cover a wide range of topics: Ports; Maritime transportation; Inland navigat

Download or read book Maritime Technology and Engineering 5 Volume 1 written by Carlos Guedes Soares and published by CRC Press. This book was released on 2021-07-08 with total page 1616 pages. Available in PDF, EPUB and Kindle. Book excerpt: This set of two volumes comprises the collection of the papers presented at the 5th International Conference on Maritime Technology and Engineering (MARTECH 2020) that was held in Lisbon, Portugal, from 16 to 19 November 2020. The Conference has evolved from the series of biennial national conferences in Portugal, which have become an international event, and which reflect the internationalization of the maritime sector and its activities. MARTECH 2020 is the fifth of this new series of biennial conferences. The set comprises 180 contributions that were reviewed by an International Scientific Committee. Volume 1 is dedicated to maritime transportation, ports and maritime traffic, as well as maritime safety and reliability. It further comprises sections dedicated to ship design, cruise ship design, and to the structural aspects of ship design, such as ultimate strength and composites, subsea structures as pipelines, and to ship building and ship repair.

Download or read book Maritime Engineering and Technology written by Carlos Guedes Soares and published by CRC Press. This book was released on 2012-11-26 with total page 698 pages. Available in PDF, EPUB and Kindle. Book excerpt: Maritime Engineering and Technology includes the papers from the 1st International Conference on Maritime Technology and Engineering (MARTECH 2011, Lisbon, Portugal, 10-12 May 2011). MARTECH 2011 was held to commemorate 100 years of the Instituto Superior Tico (IST) in Lisbon, and the contributions in the present volume reflect the

Download or read book Progress in Maritime Technology and Engineering written by Carlos Guedes Soares and published by CRC Press. This book was released on 2018-04-17 with total page 1381 pages. Available in PDF, EPUB and Kindle. Book excerpt: Progress in Maritime Technology and Engineering collects the papers presented at the 4th International Conference on Maritime Technology and Engineering (MARTECH 2018, Lisbon, Portugal, 7–9 May 2018). This conference has evolved from a series of biannual national conferences in Portugal, and has developed into an international event, reflecting the internationalization of the maritime sector and its activities. MARTECH 2018 is the fourth in this new series of biannual conferences. Progress in Maritime Technology and Engineering contains about 80 contributions from authors from all parts of the world, which were reviewed by an International Scientific Committee. The book is divided into the subject areas below: - Port performance - Maritime transportation and economics - Big data in shipping - Intelligent ship navigation - Ship performance - Computational fluid dynamics - Resistance and propulsion - Ship propulsion - Dynamics and control - Marine pollution and sustainability - Ship design - Ship structures - Structures in composite materials - Shipyard technology - Coating and corrosion - Maintenance - Risk analysis - Offshore and subsea technology - Ship motion - Ships in transit - Wave-structure interaction - Wave and wind energy - Waves Progress in Maritime Technology and Engineering will be of interest to academics and professionals involved in the above mentioned areas.

Download or read book Maritime Technology and Engineering III written by Carlos Guedes Soares and published by CRC Press. This book was released on 2016-12-01 with total page 1226 pages. Available in PDF, EPUB and Kindle. Book excerpt: Maritime Technology and Engineering 3 is a collection of papers presented at the 3rd International Conference on Maritime Technology and Engineering (MARTECH 2016, Lisbon, Portugal, 4-6 July 2016). The MARTECH Conferences series evolved from biannual national conferences in Portugal, thus reflecting the internationalization of the maritime sector. The keynote lectures and the papers, making up nearly 150 contributions, came from an international group of authors focused on different subjects in a variety of fields: Maritime Transportation, Energy Efficiency, Ships in Ports, Ship Hydrodynamics, Ship Structures, Ship Design, Ship Machinery, Shipyard Technology, afety & Reliability, Fisheries, Oil & Gas, Marine Environment, Renewable Energy and Coastal Structures. This book will appeal to academics, engineers and professionals interested or involved in these fields.

Download or read book Maritime Technology and Engineering 5 Volume 2 written by Carlos Guedes Soares and published by CRC Press. This book was released on 2021-07-08 with total page 1634 pages. Available in PDF, EPUB and Kindle. Book excerpt: This set of two volumes comprises the collection of the papers presented at the 5th International Conference on Maritime Technology and Engineering (MARTECH 2020) that was held in Lisbon, Portugal, from 16 to 19 November 2020. The Conference has evolved from the series of biennial national conferences in Portugal, which have become an international event, and which reflect the internationalization of the maritime sector and its activities. MARTECH 2020 is the fifth of this new series of biennial conferences. The set comprises 180 contributions that were reviewed by an International Scientific Committee. Volume 2 is dedicated to ship performance and hydrodynamics, including CFD, maneuvering, seakeeping, moorings and resistance. In addition, it includes sections on ship machinery, renewable energy, fishing and aquaculture, coastal structures, and waves and currents.

Download or read book Progress in Maritime Technology and Engineering written by Carlos Guedes Soares and published by CRC Press. This book was released on 2018-04-17 with total page 716 pages. Available in PDF, EPUB and Kindle. Book excerpt: Progress in Maritime Technology and Engineering collects the papers presented at the 4th International Conference on Maritime Technology and Engineering (MARTECH 2018, Lisbon, Portugal, 7–9 May 2018). This conference has evolved from a series of biannual national conferences in Portugal, and has developed into an international event, reflecting the internationalization of the maritime sector and its activities. MARTECH 2018 is the fourth in this new series of biannual conferences. Progress in Maritime Technology and Engineering contains about 80 contributions from authors from all parts of the world, which were reviewed by an International Scientific Committee. The book is divided into the subject areas below: - Port performance - Maritime transportation and economics - Big data in shipping - Intelligent ship navigation - Ship performance - Computational fluid dynamics - Resistance and propulsion - Ship propulsion - Dynamics and control - Marine pollution and sustainability - Ship design - Ship structures - Structures in composite materials - Shipyard technology - Coating and corrosion - Maintenance - Risk analysis - Offshore and subsea technology - Ship motion - Ships in transit - Wave-structure interaction - Wave and wind energy - Waves Progress in Maritime Technology and Engineering will be of interest to academics and professionals involved in the above mentioned areas.

Download or read book Marine Technology and Operations written by O. Gudmestad and published by WIT Press. This book was released on 2015-03-19 with total page 413 pages. Available in PDF, EPUB and Kindle. Book excerpt: A marine engineer will need to have a broad background of knowledge within several aspects of marine design and operations. These aspects relate to the design of facilities for offshore applications and evaluation of operational conditions for marine installation and modification/maintenance works. Such needs arise in the marine industries, in the offshore oil and gas industry as well as in the offshore renewable industry. Developed from knowledge gained throughout the author’s engineering career, this book covers several of the themes where engineers need knowledge and also serves as a teaser for those who will go into more depth on the different thematic aspects discussed. Details of qualitative risk analysis, which is considered an excellent tool to identify risks in marine operations, are also included. The book is the author’s attempt to develop a text for those in marine engineering science who like a practical and solid mathematical approach to marine engineering. It is the intention that the book can serve as an introductory textbook for master degree courses in marine sciences and be of inspiration for teachers who will extend the course into specialisation courses on stability of vessels, higher order wave analysis, nonlinear motions of vessels, arctic offshore engineering, etc. The book could also serve as a handbook for PhD students and researchers who need a handy introduction to solving marine technology related problems.

Download or read book The Maritime Engineering Reference Book written by Anthony F. Molland and published by Elsevier. This book was released on 2011-10-13 with total page 921 pages. Available in PDF, EPUB and Kindle. Book excerpt: The Maritime Engineering Reference Book is a one-stop source for engineers involved in marine engineering and naval architecture. In this essential reference, Anthony F. Molland has brought together the work of a number of the world's leading writers in the field to create an inclusive volume for a wide audience of marine engineers, naval architects and those involved in marine operations, insurance and other related fields. Coverage ranges from the basics to more advanced topics in ship design, construction and operation. All the key areas are covered, including ship flotation and stability, ship structures, propulsion, seakeeping and maneuvering. The marine environment and maritime safety are explored as well as new technologies, such as computer aided ship design and remotely operated vehicles (ROVs).Facts, figures and data from world-leading experts makes this an invaluable ready-reference for those involved in the field of maritime engineering.Professor A.F. Molland, BSc, MSc, PhD, CEng, FRINA. is Emeritus Professor of Ship Design at the University of Southampton, UK. He has lectured ship design and operation for many years. He has carried out extensive research and published widely on ship design and various aspects of ship hydrodynamics. * A comprehensive overview from best-selling authors including Bryan Barrass, Rawson and Tupper, and David Eyres* Covers basic and advanced material on marine engineering and Naval Architecture topics* Have key facts, figures and data to hand in one complete reference book

Download or read book Maritime Technology and Engineering 5 written by Carlos Guedes Soares and published by CRC Press. This book was released on 2021-05-14 with total page 1580 pages. Available in PDF, EPUB and Kindle. Book excerpt: This set of two volumes comprises the collection of the papers presented at the 5th International Conference on Maritime Technology and Engineering (MARTECH 2020) that was held in Lisbon, Portugal, from 16 to 19 November 2020. The Conference has evolved from the series of biennial national conferences in Portugal, which have become an international event, and which reflect the internationalization of the maritime sector and its activities. MARTECH 2020 is the fifth of this new series of biennial conferences. The set comprises about 180 papers, which were fully reviewed by an International Scientific Committee. The contributions are organized in the following subject areas: Maritime traffic; Maritime transportation and ports; Renewable energies; Safety; Ship Design; Design of Cruise ships; Ship Hydrodynamics (CFD, Manoeuvring, Manoeuvring in Waves, Moorings, Resistance, Seakeeping and Slamming); Ship Machinery; Ship Performance; Ship Structures (Ultimate Strength; Composites, Fatigue; Impact; Pipelines); Shipbuilding and Ship Repair; Wave modelling in storms; Waves and currents, Coastal structures, and Fishing and aquaculture.

Download or read book Trends in Maritime Technology and Engineering written by C. Guedes Soares and published by CRC Press. This book was released on 2022-06-07 with total page 1325 pages. Available in PDF, EPUB and Kindle. Book excerpt: Trends in Maritime Technology and Engineering comprises the papers presented at the 6th International Conference on Maritime Technology and Engineering (MARTECH 2022) that was held in Lisbon, Portugal, from 24-26 May 2022. The Conference has evolved from the series of biennial national conferences in Portugal, which have become an international event, and which reflect the internationalization of the maritime sector and its activities. MARTECH 2022 is the sixth of this new series of biennial conferences. The book covers all aspects of maritime activity, including in Volume 1: Structures, Hydrodynamics, Machinery, Control and Design. In Volume 2: Maritime Transportation and Ports, Maritime Traffic, Safety, Environmental Conditions, Renewable Energy, Oil & Gas, and Fisheries and Aquaculture. Trends in Maritime Technology and Engineering aims at academics and professionals in the above mentioned fields.

Download or read book Advances in Maritime Technology and Engineering written by Carlos Guedes Soares and published by CRC Press. This book was released on 2024-05-08 with total page 609 pages. Available in PDF, EPUB and Kindle. Book excerpt: Advances in Maritime Technology and Engineering comprises a collection of the papers presented at the 7th International Conference on Maritime Technology and Engineering (MARTECH 2024) held in Lisbon, Portugal, on 14-16 May 2024. This Conference has evolved from the series of biannual national conferences in Portugal, which have become an international event, reflecting the internationalization of the maritime sector and its activities. MARTECH 2024 is the seventh of this new series of biannual conferences. This book comprises 142 contributions that were reviewed by an International Scientific Committee. Advances in Maritime Technology and Engineering is dedicated to maritime transportation, ports as well as maritime safety and reliability. It further comprises sections dedicated to ship design, cruise ship design, and to the structural aspects of ship design, such as ultimate strength and composites, subsea structures as pipelines, and to ship building and ship repair. The Proceedings in Marine Technology and Ocean Engineering series is dedicated to the publication of proceedings of peer-reviewed international conferences dealing with various aspects of “Marine Technology and Ocean Engineering”. The series includes the proceedings of the following conferences: the International Maritime Association of the Mediterranean (IMAM) conferences, the Marine Structures (MARSTRUCT) conferences, the Renewable Energies Offshore (RENEW) conferences and the Maritime Technology (MARTECH) conferences. The “Marine Technology and Ocean Engineering” series is also open to new conferences that cover topics on the sustainable exploration of marine resources in various fields, such as maritime transport and ports, usage of the ocean including coastal areas, nautical activities, the exploration and exploitation of mineral resources, the protection of the marine environment and is resources, and risk analysis, safety and reliability. The aim of the series is to stimulate advanced education and training through the wide dissemination of the results of scientific research.

Download or read book Advanced Maritime Technologies and Applications written by Azman Ismail and published by Springer Nature. This book was released on 2022-01-10 with total page 398 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book presents the outcomes from the 2nd International Conference on Marine and Advanced Technologies 2021 (Icmat2021) which was organized by the Research and Innovation section, University Kuala Lumpur - Malaysian Institute of Marine Engineering Technology. The theme “Propelling to the Innovative Idea” highlights prominence of recent developments in marine and advanced technologies in the field of marine application, maritime operation, energy and reliability, advanced materials and applied science. This online conference provided a platform for presentations and discussions at the local and international level between educationists, researchers, students, and industrialists. Furthermore, it created opportunities to establish networks and meet experts in addition to exchange of up-to-date knowledge in the field. This book is the up-to-date reference, especially to those who want to learn and explore more about the latest developments and technologies of maritime industries.

Download or read book Advances in Maritime Technology and Engineering written by Carlos Guedes Soares and published by CRC Press. This book was released on 2024-05-08 with total page 715 pages. Available in PDF, EPUB and Kindle. Book excerpt: Advances in Maritime Technology and Engineering comprises a collection of the papers presented at the 7th International Conference on Maritime Technology and Engineering (MARTECH 2024) held in Lisbon, Portugal, on 14-16 May 2024. This Conference has evolved from the series of biannual national conferences in Portugal, which have become an international event, reflecting the internationalization of the maritime sector and its activities. MARTECH 2024 is the seventh of this new series of biannual conferences. This book comprises 142 contributions that were reviewed by an International Scientific Committee. Advances in Maritime Technology and Engineering is dedicated to maritime transportation, ports as well as maritime safety and reliability. It further comprises sections dedicated to ship design, cruise ship design, and to the structural aspects of ship design, such as ultimate strength and composites, subsea structures as pipelines, and to ship building and ship repair. The Proceedings in Marine Technology and Ocean Engineering series is dedicated to the publication of proceedings of peer-reviewed international conferences dealing with various aspects of “Marine Technology and Ocean Engineering”. The series includes the proceedings of the following conferences: the International Maritime Association of the Mediterranean (IMAM) conferences, the Marine Structures (MARSTRUCT) conferences, the Renewable Energies Offshore (RENEW) conferences and the Maritime Technology (MARTECH) conferences. The “Marine Technology and Ocean Engineering” series is also open to new conferences that cover topics on the sustainable exploration of marine resources in various fields, such as maritime transport and ports, usage of the ocean including coastal areas, nautical activities, the exploration and exploitation of mineral resources, the protection of the marine environment and is resources, and risk analysis, safety and reliability. The aim of the series is to stimulate advanced education and training through the wide dissemination of the results of scientific research.

Download or read book Introduction to Marine Engineering written by D A Taylor and published by Elsevier. This book was released on 2014-05-20 with total page 380 pages. Available in PDF, EPUB and Kindle. Book excerpt: Introduction to Marine Engineering explains the operation of all the ship's machinery, with emphasis on correct, safe operating procedures and practices at all times. Organized into 17 chapters, this book begins with an overall look at the ship. Subsequent chapters describe the various ship machineries, including diesel engines, steam turbines, boilers, feed systems, pumps, auxiliaries, deck machinery, hull equipment, shafting, propellers, steering gear, and electrical equipment. Other aspects of marine engineering, particularly, fuel oils, lubricating oils, refrigeration, air conditioning, ventilation, firefighting and safety, watchkeeping, and equipment operation, are also described. This book will be useful to anyone with an interest in ships' machinery or a professional involvement in the shipping business.

Download or read book Reeds Vol 6 Basic Electrotechnology for Marine Engineers written by Christopher Lavers and published by A&C Black. This book was released on 2013-04-26 with total page 529 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book provides a comprehensive coverage of the basic theoretical work required by marine engineering officers and electrotechnical officers (ETOs), putting into place key fundamental building blocks and topics in electrotechnology before progressing to more complex topics and electromagnetic systems. Revisions will include important new material on emergent technology such as image intensifiers, the increased maritime use of LEDs, examples of ship systems including power distribution systems, and references to modern ship systems, eg. GPS, ECDIS, Radar, AIS, Comms outfits, etc. This essential text offers a truly rigorous approach to the key topic of electrotechnology.

Download or read book Trends in Maritime Technology and Engineering written by C. Guedes Soares and published by . This book was released on 2022 with total page 0 pages. Available in PDF, EPUB and Kindle. Book excerpt: