Download or read book Marine Engineering and Shipping Review written by and published by . This book was released on 1952 with total page 1390 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Introduction to Marine Engineering written by D A Taylor and published by Elsevier. This book was released on 2014-05-20 with total page 380 pages. Available in PDF, EPUB and Kindle. Book excerpt: Introduction to Marine Engineering explains the operation of all the ship's machinery, with emphasis on correct, safe operating procedures and practices at all times. Organized into 17 chapters, this book begins with an overall look at the ship. Subsequent chapters describe the various ship machineries, including diesel engines, steam turbines, boilers, feed systems, pumps, auxiliaries, deck machinery, hull equipment, shafting, propellers, steering gear, and electrical equipment. Other aspects of marine engineering, particularly, fuel oils, lubricating oils, refrigeration, air conditioning, ventilation, firefighting and safety, watchkeeping, and equipment operation, are also described. This book will be useful to anyone with an interest in ships' machinery or a professional involvement in the shipping business.
Download or read book Modern Marine Engineer s Manual written by Everett C. Hunt and published by Cornell Maritime Press/Tidewater Publishers. This book was released on 1999 with total page 1296 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book is designed to serve as a textbook for students and a reference for today's engineering officers, port engineers, superintendent engineers, and other maritime professionals. Steam turbine propulsion systems are included, but the coverage has been reduced in recognition of the popularity of main propulsion diesel engines, covered in volume 2, and the anticipated increasing applications of aeroderivative gas turbines. Reciprocating steam engines have been eliminated. Pumps, pumping systems, and heat exchangers are given extensive coverage. Computer applications for machinery and system management are presented, including an entire chapter on maintenance management. Relevant material on international and national laws, classification society requirements, and standards, such as ISO 9000 series and the ISM code, are included in the text. The characteristics of fuels are presented along with a discussion of fuel testing and analysis, and a section on bunkering. A chapter on safety and management discusses shipboard engineering operations, shipyard repair planning and economics, and safety management. Each chapter includes review questions and references for additional study.
Download or read book Marine Engineering written by Society of Naval Architects and Marine Engineers (U.S.) and published by . This book was released on 1971 with total page 898 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Marine Engineering Economics and Cost Analysis written by Everett C. Hunt and published by Cornell Maritime Press/Tidewater Publishers. This book was released on 1995 with total page 492 pages. Available in PDF, EPUB and Kindle. Book excerpt: Marine Engineering Economics and Cost Analysis is intended for students and practitioners of ship design, shipbuilding, and ship operations who want to understand and apply the concepts of engineering economics to routine engineering decisions. Computer software is included to aid in completing the analyses required. "To my knowledge this is the first text published during my fifty-year career...that deals with the methods of economic evaluation of maritime decision alternatives from an engineering viewpoint....This book applies engineering economics and cost analysis to the maritime industry and sets forth in a logical sequence the method to reach the most efficient vessel from both a cost and capacity-required approach."--from the foreword by Captain Warren G. Leback, former maritime administrator.
Download or read book Computational Ship Design written by Myung-Il Roh and published by Springer. This book was released on 2017-09-29 with total page 381 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book offers an introduction to the fundamental principles and systematic methodologies employed in computational approaches to ship design. It takes a detailed approach to the description of the problem definition, related theories, mathematical formulation, algorithm selection, and other core design information. Over eight chapters and appendices the book covers the complete process of ship design, from a detailed description of design theories through to cutting-edge applications. Following an introduction to relevant terminology, the first chapters consider ship design equations and models, freeboard calculations, resistance prediction and power estimation. Subsequent chapters cover topics including propeller deign, engine selection, hull form design, structural design and outfitting. The book concludes with two chapters considering operating design and economic factors including construction costs and fuel consumption. The book reflects first-hand experiences in ship design and R&D activities, and incorporates improvements based on feedback received from many industry experts. Examples provided are based on genuine case studies in the field. The comprehensive description of each design stage presented in this book offers guidelines for academics, researchers, students, and industrial manufactures from diverse fields, including ocean engineering and mechanical engineering. From a commercial point of view the book will be of great value to those involved in designing a new vessel or improving an existing ship.
Download or read book Maritime Engineering and Technology written by Carlos Guedes Soares and published by CRC Press. This book was released on 2012-11-26 with total page 698 pages. Available in PDF, EPUB and Kindle. Book excerpt: Maritime Engineering and Technology includes the papers from the 1st International Conference on Maritime Technology and Engineering (MARTECH 2011, Lisbon, Portugal, 10-12 May 2011). MARTECH 2011 was held to commemorate 100 years of the Instituto Superior Tico (IST) in Lisbon, and the contributions in the present volume reflect the
Download or read book Marine Structures Engineering Specialized Applications written by Gregory Tsinker and published by Springer Science & Business Media. This book was released on 2012-12-06 with total page 567 pages. Available in PDF, EPUB and Kindle. Book excerpt: Marine Structures Engineering is designed to help engineers meet the growing worldwide demand for construction of new ports and the modernization of existing ports and terminals. It provides an authoritative guide to the design, construction, rehabilitation, repair, and maintenance of port and harbor structures. Each chapter is self-contained, allowing readers to access specific information. The Author draws on his extensive experience in offshore structure and port engineering to demonstrate evaluation, rehabilitation, repair, and maintenance of in-service marine structures. Also covered in detail are state-of-the-art approaches to: *marine structures in cold regions, with special attention to the role of ice loads, permafrost, and other ice effects *shiplifts, marine railways, shipways, and dry docks *offshore moorings *floating breakwaters *marinas *structures that protect bridge piers from ship impact. Offering practical information on all aspects of marine structures, this book serves as an indispensable resource to all engineers and professionals involved in design, construction, maintenance, and modernization of ports and harbors.
Download or read book Marine Auxiliary Machinery written by H. D. McGeorge and published by Elsevier. This book was released on 2013-10-22 with total page 525 pages. Available in PDF, EPUB and Kindle. Book excerpt: Marine Auxiliary Machinery, Seventh Edition is a 16-chapter text that covers the significant advances in marine auxiliary machinery relevant to the certification of competency examinations. The introductory chapters deal with the basic components of marine machineries, such as propulsion system, heat exchanger, valves, and pipelines. The succeeding chapters describe the pumps and pumping system, specifically the tanker and gas carrier cargo pumps. Considerable chapters are devoted to the operation of machinery's major components, including the propeller shaft, steering gear, auxiliary power, bow thrusters, and stabilizers. Other chapters consider the refrigeration, heating, ventilation, and air conditioning systems. The final chapters tackle the safety system of marine auxiliary machinery, particularly the fire protection, safety, instrumentation, and control systems. This book will prove useful to marine and mechanical engineers.
Download or read book Introduction to Naval Engineering written by David Blank and published by US Naval Institute Press. This book was released on 2005-11-30 with total page 0 pages. Available in PDF, EPUB and Kindle. Book excerpt: This second edition of the basic textbook in shipboard engineering presents the latest information on steam, gas turbine, and nuclear propulsion, as well as auxiliary systems, ship stability, and damage control. New to this edition is a section on engineering documentation.
Download or read book The Maritime Engineering Reference Book written by Anthony F. Molland and published by Elsevier. This book was released on 2011-10-13 with total page 921 pages. Available in PDF, EPUB and Kindle. Book excerpt: The Maritime Engineering Reference Book is a one-stop source for engineers involved in marine engineering and naval architecture. In this essential reference, Anthony F. Molland has brought together the work of a number of the world's leading writers in the field to create an inclusive volume for a wide audience of marine engineers, naval architects and those involved in marine operations, insurance and other related fields. Coverage ranges from the basics to more advanced topics in ship design, construction and operation. All the key areas are covered, including ship flotation and stability, ship structures, propulsion, seakeeping and maneuvering. The marine environment and maritime safety are explored as well as new technologies, such as computer aided ship design and remotely operated vehicles (ROVs).Facts, figures and data from world-leading experts makes this an invaluable ready-reference for those involved in the field of maritime engineering.Professor A.F. Molland, BSc, MSc, PhD, CEng, FRINA. is Emeritus Professor of Ship Design at the University of Southampton, UK. He has lectured ship design and operation for many years. He has carried out extensive research and published widely on ship design and various aspects of ship hydrodynamics.* A comprehensive overview from best-selling authors including Bryan Barrass, Rawson and Tupper, and David Eyres* Covers basic and advanced material on marine engineering and Naval Architecture topics* Have key facts, figures and data to hand in one complete reference book
Download or read book General Engineering Knowledge written by H D McGeorge and published by Routledge. This book was released on 2012-09-10 with total page 168 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book covers the general engineering knowledge required by candidates for the Department of Transport's Certificates of Competency in Marine Engineering, Class One and Class Two. The text is updated throughout in this third edition, and new chapters have been added on production of fresh water and on noise and vibration. Reference is also provided to up-to-date papers and official publications on specialized topics. These updates ensure that this little volume will continue to be a useful pre-examination and revision text. - Marine Engineers Review, January 1992
Download or read book Reeds Vol 8 General Engineering Knowledge for Marine Engineers written by Paul Anthony Russell and published by Bloomsbury Publishing. This book was released on 2018-09-06 with total page 609 pages. Available in PDF, EPUB and Kindle. Book excerpt: Developed to complement Reeds Vol 12 (Motor Engineering for Marine Engineers), this textbook is key for all marine engineering officer cadets. Accessibly written and clearly illustrated, General Engineering Knowledge for Marine Engineers takes into account the varying needs of students studying 'general' marine engineering, recognising recent changes to the Merchant Navy syllabus and current pathways to a sea-going engineering career. It includes the latest equipment, practices and trends in marine engineering, as well as incorporating the 2010 Manila Amendments, particularly relating to management. It is an essential buy for any marine engineering student. This new edition reflects all developments within the discipline and includes updates and additions on, amongst other things: · Corrosion, water treatments and tests · Refrigeration and air conditioning · Fuels, such as LNG and LPG · Insulation · Low sulphur fuels · Fire and safety Plus updates to many of the technical engineering drawings.
Download or read book Reeds Vol 2 Applied Mechanics for Marine Engineers written by Paul Anthony Russell and published by Bloomsbury Publishing. This book was released on 2021-12-09 with total page 671 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book covers the principal topics in applied mechanics for professional trainees studying Merchant Navy Marine Engineering Certificates of Competency (CoC) as well as the core syllabi in applied mechanics for undergraduates studying for BSc, BEng and MEng degrees in marine engineering, naval architecture and other marine technology related programmes. This new edition has been fully updated to reflect the recent changes to the Merchant Navy syllabus and current pathways to a sea-going engineering career, specifically the increased emphasis that has been placed on colleges and universities now responsible for the academic requirements for those studying for a career in marine engineering. In particular this means the book has been updated to include more information about the general principles and applications of the exercises in the practical world of marine engineering. Each chapter has fully worked examples interwoven into the text, with test examples set at the end of each chapter. Other revisions include examples reflecting modern machines and practice, current legislation and current syllabi.
Download or read book Reeds Vol 12 Motor Engineering Knowledge for Marine Engineers written by Paul Anthony Russell and published by Bloomsbury Publishing. This book was released on 2018-09-06 with total page 385 pages. Available in PDF, EPUB and Kindle. Book excerpt: Developed to complement Reeds Vol 8 (General Engineering for Marine Engineers), this indispensable textbook comprehensively covers the motor engineering syllabus for marine engineering officer cadets. Starting with the theoretical and practical thermodynamic operating cycles, the book is structured to give a description of the engines and components used to extract energy from fossil fuels and achieve high levels of efficiency. Accessibly written and clearly illustrated, this book is the only guide available for marine engineering students focusing on the knowledge needed for passing the motor engineering certificate of Competency (CoC) examinations. This new edition reflects all developments within the discipline and includes updates and additions on, amongst other things: · Engine emissions and control engineering · Fuel injection · Starting and reversing · Ancillary supply systems · Safety and the environment Plus updates to many of the technical engineering drawings.
Download or read book Marine Engineering and Shipping Review written by and published by . This book was released on 1945 with total page 1690 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Ship Construction written by David J. Eyres and published by Heinemann Educational Books. This book was released on 1972 with total page 362 pages. Available in PDF, EPUB and Kindle. Book excerpt: Ship Construction is a comprehensive text for students of naval architecture, ship building and construction, and for professional Naval Architects and Marine Engineers. Covers the complete ship construction process including the development of ship types, materials and strengths of ships, welding and cutting, shipyard practice, ship structure and outfitting, All the latest developments in technology and shipyard methods, including a new chapter on computer-aided design and manufacture, Essential for students and professionals, particularly those working in shipyards, supervising ship construction, conversion and maintenance. Book jacket.
