Download or read book Marine Corrosion Behaviour of Certain Niobium Containing Nickel Base Alloys written by L. R. Davies-Smith and published by . This book was released on 1987 with total page 0 pages. Available in PDF, EPUB and Kindle. Book excerpt:

Download or read book Corrosion Behaviour of Nickel titanium Shape Memory Alloys with Copper and Niobium Additions written by Moipone Linda Lethabane and published by . This book was released on 2013 with total page 318 pages. Available in PDF, EPUB and Kindle. Book excerpt: Studies the corrosion behavior of sintered Ni-Ti shape memory alloys containing Cu and Nb additions.Objectives are: 1. Investigate structural and phased interactions occurring during the sintering of the allloys. 2. Study the effects of niobium and copper addition on the general corrosion behavior of the sintered nickel-titanium alloys in sodium chloride and sulphuric acid. 3. Study the effects of copper and niobium addition on localized corrosion behavior of the alloys in chloride environments.

Download or read book Corrosion Resistance of Nickel and Nickel Alloys Against Acids and Lyes written by Michael Schütze and published by John Wiley & Sons. This book was released on 2015-01-27 with total page 363 pages. Available in PDF, EPUB and Kindle. Book excerpt: Derived from the online reference "Corrosion Handbook", this handbook brings together all the relevant information on corrosion protection and prevention for nickel-based materials, all in a convenient and easy-to-use format. As such, it provides scientists and engineers manufacturing and utilizing these materials with comprehensive information, including tabulated data and references, on their corrosion behavior when in contact with acids and hydroxides.

Download or read book Index to Theses with Abstracts Accepted for Higher Degrees by the Universities of Great Britain and Ireland and the Council for National Academic Awards written by and published by . This book was released on 2000 with total page 824 pages. Available in PDF, EPUB and Kindle. Book excerpt:

Download or read book Corrosion Science and Technology written by David E.J. Talbot and published by CRC Press. This book was released on 2018-01-29 with total page 597 pages. Available in PDF, EPUB and Kindle. Book excerpt: Twenty years after its first publication, Corrosion Science and Technology continues to be a relevant practical guide for students and professionals interested in material science. This Third Edition thoroughly covers the basic principles of corrosion science in the same reader-friendly manner that made the previous editioninvaluable, and enlarges the scope of the content with expanded chapters on processes for various metals and new technologies for limiting costs and metal degradation in a variety of commercial enterprises not explored in previous editions. This book also presents expertly developed methods of corrosion testing and prediction.

Download or read book Crevice Corrosion Behavior of Nickel Base Alloys in Natural and Chlorinated Seawater written by R. M. Kain and published by . This book was released on 1987 with total page 23 pages. Available in PDF, EPUB and Kindle. Book excerpt:

Download or read book Scientific and Technical Aerospace Reports written by and published by . This book was released on 1994 with total page 836 pages. Available in PDF, EPUB and Kindle. Book excerpt:

Download or read book Metals Abstracts written by and published by . This book was released on 1993 with total page 1220 pages. Available in PDF, EPUB and Kindle. Book excerpt:

Download or read book Materials in the Sea written by and published by . This book was released on 1972 with total page 214 pages. Available in PDF, EPUB and Kindle. Book excerpt:

Download or read book Effect of Alloying Elements on the Corrosion Behaviour of Copper nickel Alloys in a Marine Environment written by Abulmaali M. Y. Taher and published by . This book was released on 2008 with total page 0 pages. Available in PDF, EPUB and Kindle. Book excerpt:

Download or read book Mond Nickel Bulletin written by and published by . This book was released on 1967 with total page 572 pages. Available in PDF, EPUB and Kindle. Book excerpt: Includes sections "Abstracts and references" and "Pattents".

Download or read book British Reports Translations and Theses written by British Library. Document Supply Centre and published by . This book was released on 1988 with total page 490 pages. Available in PDF, EPUB and Kindle. Book excerpt:

Download or read book The Influence of Marine Microfouling on the Corrosion Behaviour of Passive Materials and Copper Alloys written by and published by . This book was released on 2008 with total page 9 pages. Available in PDF, EPUB and Kindle. Book excerpt: The influence of marine biofilms on corrosion varies with alloy composition. At temperatures below 60 C, resistance to crevice corrosion is the limiting factor for selecting alloys for seawater service and is the most problematic issue affecting the performance of passive alloys in seawater. Several investigators have documented the tendency for biofilms to cause a noble shift, or an ennoblement, in open-circuit potential (OCP) of passive alloys exposed in marine environments. Ennoblement in marine waters has been ascribed to depolarization of the oxygen reduction reaction due to organometallic catalysis, acidification of the electrode surface, the combined effects of elevated H2O2 and decreased pH and the production of passivating siderophores. The alloys tested include, but are not limited to: UNS S30400, S30403, S31600, S31603, S31703, S31803, N08904, N08367, S44660, S20910, S44735, N10276, N06625, platinum, gold, palladium, chromium, titanium, and nickel. Theoretically, potential ennoblement should increase the probability for pitting and crevice corrosion initiation and propagation, especially for alloys with pitting potentials within 300 mV of the OCP. The relationship between passive alloy composition and ennoblement will be discussed. The well-known toxicity of cuprous ions toward living organisms does not mean that the copper-based alloys are immune to microbial colonization and microbiologically influenced corrosion (MIC). It does mean, however, that only those organisms with a high tolerance for copper are likely to have a substantial effect. Most of the reported cases of MIC of copper alloys in marine environments are not related to ennoblement of OCP, but are caused by the reduction of sulfate (concentration> 2 gm/L) to hydrogen sulfide.

Download or read book Crevice Corrosion Behaviour of Nickel Based Alloys in Neutral Chloride Solutions written by Stephen John Mulford and published by . This book was released on 1985 with total page 158 pages. Available in PDF, EPUB and Kindle. Book excerpt:

Download or read book Corrosion Behaviour and Protection of Copper and Aluminium Alloys in Seawater written by D Féron and published by Elsevier. This book was released on 2007-05-17 with total page 219 pages. Available in PDF, EPUB and Kindle. Book excerpt: Copper and aluminium alloys are widely used in marine engineering in areas such as pipelines, storage tanks, ships' hulls and cladding for offshore structures. This important book reviews key factors affecting the corrosion and service life of these materials in the marine environment. The book is divided into five parts, with part one reviewing key aspects of the corrosion behaviour of both these alloys. Part two discusses the use of copper and copper-nickel alloys in seawater, whilst Parts 3 and 4 cover aluminium bronzes and alloys. The final section of the book covers the use of aluminium-based materials as anodes for the cathodic protection of marine structures.Corrosion behaviour and protection of copper and aluminium alloys in seawater is an important reference for marine engineers concerned with the corrosion and service life of these materials. - Reviews key factors affecting the corrosion and service life of copper and aluminium alloys - Discusses the use of the alloys in seawater

Download or read book Atmospheric Corrosion Behavior of Some Nickel Alloys written by HR. Copson and published by . This book was released on 1968 with total page 12 pages. Available in PDF, EPUB and Kindle. Book excerpt: Nickel, nickel-copper, and nickel-chromium-iron alloys were included in an atmospheric corrosion test series in industrial, marine, and rural sites. Pit depths, losses in weight, and losses in mechanical properties were extremely small after a seven-year period of exposure. The nickel-iron-chromium materials had the lowest corrosion rates, about 0.01 milligrams per square decimeter per day (about 0.002 mils per year). The corrosion rates of the nickel-iron-chromium alloys appear to have decreased substantially with exposure time, while the nickel and nickel-copper alloy specimens follow approximately linear rates. Long time durability data have also been obtained for a number of nickel-copper-iron alloys. These were boldly exposed at Bayonne, N. J., for almost 40 years. Data led to the construction of isograms connecting compositions of equal durability on the nickel-iron-copper ternary diagram. Effects of exposure under shelter are also discussed.

Download or read book Mechanical Behaviour and Testing of Materials written by Bhargava A. K. and published by PHI Learning Pvt. Ltd.. This book was released on 2011-06-30 with total page 590 pages. Available in PDF, EPUB and Kindle. Book excerpt: "This book provides an insight into the mechanical behaviour and testing of metals, polymers, ceramics and composites, which are widely employed for structural applications under varying loads, temperatures and environments. Organized in 13 chapters, this book begins with explaining the fundamentals of materials, their basic building units, atomic bonding and crystal structure, further describing the role of imperfections on the behaviour of metals and alloys. The book then explains dislocation theory in a simplified yet analytical manner. The destructive and non-destructive testing methods are discussed, and the interpreted test data are then examined critically."--Publisher's description.