Download or read book Handbook of Manufacturing Industries in the World Economy written by John R. Bryson and published by Edward Elgar Publishing. This book was released on 2015-04-30 with total page 538 pages. Available in PDF, EPUB and Kindle. Book excerpt: This interdisciplinary volume provides a critical and multi-disciplinary review of current manufacturing processes, practices, and policies, and broadens our understanding of production and innovation in the world economy. Chapters highlight how firms
Download or read book Trouble in the Making written by Mary Hallward-Driemeier and published by World Bank Publications. This book was released on 2017-10-12 with total page 288 pages. Available in PDF, EPUB and Kindle. Book excerpt: Technology and globalization are threatening manufacturing’s traditional ability to deliver both productivity and jobs at a large scale for unskilled workers. Concerns about widening inequality within and across countries are raising questions about whether interventions are needed and how effective they could be. Trouble in the Making? The Future of Manufacturing-Led Development addresses three questions: - How has the global manufacturing landscape changed and why does this matter for development opportunities? - How are emerging trends in technology and globalization likely to shape the feasibility and desirability of manufacturing-led development in the future? - If low wages are going to be less important in defining competitiveness, how can less industrialized countries make the most of new opportunities that shifting technologies and globalization patterns may bring? The book examines the impacts of new technologies (i.e., the Internet of Things, 3-D printing, and advanced robotics), rising international competition, and increased servicification on manufacturing productivity and employment. The aim is to inform policy choices for countries currently producing and for those seeking to enter new manufacturing markets. Increased polarization is a risk, but the book analyzes ways to go beyond focusing on potential disruptions to position workers, firms, and locations for new opportunities. www.worldbank.org/futureofmanufacturing
Download or read book Metric Standards for Worldwide Manufacturing written by Knut O. Kverneland and published by American Society of Mechanical Engineers. This book was released on 2007 with total page 0 pages. Available in PDF, EPUB and Kindle. Book excerpt: This is one of the best tools you can use to cut manufacturing and engineering costs. In addition, it is your key to global marketing, manufacturing, and engineering of your metric products. It is a one of a kind sourcebook for designers, engineers, and manufacturers. Comprising over 800 pages of metric standards and key approaches to metrication, this is a comprehensive, easy-to-use reference of all data required for smooth metric system transition -- essential for companies exporting goods.
Download or read book The Fourth Industrial Revolution written by Klaus Schwab and published by Crown Currency. This book was released on 2017-01-03 with total page 194 pages. Available in PDF, EPUB and Kindle. Book excerpt: World-renowned economist Klaus Schwab, Founder and Executive Chairman of the World Economic Forum, explains that we have an opportunity to shape the fourth industrial revolution, which will fundamentally alter how we live and work. Schwab argues that this revolution is different in scale, scope and complexity from any that have come before. Characterized by a range of new technologies that are fusing the physical, digital and biological worlds, the developments are affecting all disciplines, economies, industries and governments, and even challenging ideas about what it means to be human. Artificial intelligence is already all around us, from supercomputers, drones and virtual assistants to 3D printing, DNA sequencing, smart thermostats, wearable sensors and microchips smaller than a grain of sand. But this is just the beginning: nanomaterials 200 times stronger than steel and a million times thinner than a strand of hair and the first transplant of a 3D printed liver are already in development. Imagine “smart factories” in which global systems of manufacturing are coordinated virtually, or implantable mobile phones made of biosynthetic materials. The fourth industrial revolution, says Schwab, is more significant, and its ramifications more profound, than in any prior period of human history. He outlines the key technologies driving this revolution and discusses the major impacts expected on government, business, civil society and individuals. Schwab also offers bold ideas on how to harness these changes and shape a better future—one in which technology empowers people rather than replaces them; progress serves society rather than disrupts it; and in which innovators respect moral and ethical boundaries rather than cross them. We all have the opportunity to contribute to developing new frameworks that advance progress.
Download or read book Global Manufacturing Management written by Thomas Friedli and published by Springer Nature. This book was released on 2021-09-28 with total page 363 pages. Available in PDF, EPUB and Kindle. Book excerpt: Using site-specific optimization approaches in international manufacturing networks is increasingly proving insufficient. To solve this problem, several holistic and integrated alternatives have been developed to reflect a global perspective. This book presents advances in the St. Gallen Global Manufacturing Network Model and its application in numerous industry-, benchmarking- and research projects. The contents combine data-driven solutions with qualitative management frameworks for the strategic optimization of international manufacturing networks. In the first part, the book addresses the foundation of manufacturing network management and further describes the St. Gallen Operational Excellence approaches to manage plant performance. On this basis, the authors show how plant- and network-level performance can be enhanced via key improvement domains (e.g., strategy, configuration, coordination, performance management, digitalization). In turn, the second part demonstrates the application of the constructs in manufacturing companies from various industries. By combining research and practice, the book offers unique perspectives on the management of global production striving toward higher performance on manufacturing site and network level.
Download or read book Global Manufacturing And Secondary Innovation In China Latecomer s Advantages written by Xiaobo Wu and published by World Scientific. This book was released on 2020-12-17 with total page 305 pages. Available in PDF, EPUB and Kindle. Book excerpt: Innovation studies have long been confined to the theoretical system established by the scholars of developed countries in the West. It is difficult to use these studies to understand the real nature and law of technological innovation in developing countries. This book, in an innovative manner, studies the theoretical system of secondary innovation, and reveals the evolution law and dynamic innovation mode of the activities carried out by technologically backward countries. It does so by laying an important foundation for the development of management science theory on the basis of the standpoint and characteristics of developing countries.
Download or read book Strategic Management of Global Manufacturing Networks written by Thomas Friedli and published by Springer. This book was released on 2014-07-08 with total page 278 pages. Available in PDF, EPUB and Kindle. Book excerpt: The preceding process of globalization and the continuously rising competitive pressure on manufacturing companies in more developed economies unveiled the limits of classical site-focused optimization approaches. The focus of network optimization shifts ever more towards an integrative view of manufacturing networks, striving for a harmonization of the strategy-, configuration- and coordination levels. This book presents such an integrative approach to the strategic management of manufacturing networks. Besides strategic network requirements, this book discusses the derivation of an optimal global footprint and the optimization of network coordination activities. Special attention is paid to the site roles concept, especially to the concept of 'lead factory'. A large number of up-to-date cases from the producing industry enrich the book and provide the reader with vivid examples for the application of the presented concepts. Hence, this book is a must-read for both practitioners and academic researchers.
Download or read book The FDA and Worldwide Current Good Manufacturing Practices and Quality System Requirements Guidebook for Finished Pharmaceuticals written by José Rodríguez-Pérez and published by Quality Press. This book was released on 2014-08-15 with total page 246 pages. Available in PDF, EPUB and Kindle. Book excerpt: This guidance book is meant as a resource to manufacturers of pharmaceuticals, providing up-to-date information concerning required and recommended quality system practices. It should be used as a companion to the regulations/standards themselves and texts on the specific processes and activities contained within the QMS. This book includes chapters on US current Good Manufacturing Practice (GMP); international GMP; global GMP guides and harmonization; detailed analysis of the requirements and guidances; missing subparts; what inspectors are looking for; and the price of noncompliance. It also includes an appendix with two tabulated comparisons: the first compares US, European-PIC/S, Canadian, and WHO cGMPs, while the second compares US cGMPs with effective quality system elements. The companion CD contains cGMP regulations for sterile products produced by aseptic processing; it also includes updated data of statistical enforcement by the FDA, both domestically and abroad; a detailed glossary; and dozens of FDA guidance documents as well as international regulations (EU and Canada) and harmonization documents (WHO, PIC/S, and ICH). A very comprehensive checklist for a cGMP audit that is based on risk management criteria is also included. Finally, a comprehensive GMP exam is also included.
Download or read book Competing in World class Manufacturing written by Craig Giffi and published by McGraw-Hill Professional Publishing. This book was released on 1990 with total page 440 pages. Available in PDF, EPUB and Kindle. Book excerpt: Here's the first book to give you a complete manufacturing strategy. Based on an in-depth study of the strategies and operating practices of dozens of leading manufacturers, this book describes a common framework for world-class manufacturers.
Download or read book Growth in a Time of Change written by Hyeon-Wook Kim and published by Brookings Institution Press. This book was released on 2020-02-25 with total page 376 pages. Available in PDF, EPUB and Kindle. Book excerpt: Growth in a Time of Change: Global and Country Perspectives on a New Agenda is the first of a two-book research project that addresses new issues and challenges for economic growth arising from ongoing significant change in the world economy, focusing especially on technological transformation. The project is a collaboration between the Brookings Institution and the Korea Development Institute. Part I of the book looks at key elements of change from a global perspective. It analyzes how technological change, shifts in investment, and demographic transition are affecting potential economic growth globally and across major groups of economies. The contributors explore possible scenarios for the global economy as the digital revolution drives rapid technological change, including impacts on growth, jobs, income distribution, trade balances, and capital flows. Technology is changing the global configuration of comparative advantage and globalization increasingly has a digital dimension. The implications of these developments for the future of sectors such as manufacturing and for international trade are assessed. Part II of the book addresses new issues in the growth agenda from the perspective of an individual major economy: South Korea. The chapters in this section analyze how macroeconomic developments and technological change are influencing the behavior of households and firms in terms of their decisions to consume, save, and invest. Rising income and wealth inequalities are a major concern globally. Against this backdrop, trends in the labor income share and wage inequalities in South Korea are analyzed in terms of the role played by technology, industrial concentration, shifts in labor demand and supply, and other factors. Throughout the book, the contributors, in their analysis of both global and Korea-specific trends and prospects, place emphasis on drawing implications for policy.
Download or read book Performance Measurement for World Class Manufacturing written by Brian H. Maskell and published by CRC Press. This book was released on 1991-07-01 with total page 448 pages. Available in PDF, EPUB and Kindle. Book excerpt: If your company is adopting world class manufacturing techniques, you'll need new methods of performance measurement to control production variables. In practical terms, this book describes the new methods of performance measurement and how they are used in a changing environment. For manufacturing managers, as well as cost accountants, it provides the theoretical foundation for these innovative methods and is supported by extensive practical examples.
Download or read book Performance of Manufacturing Firms in Africa written by Hinh T. Dinh and published by World Bank Publications. This book was released on 2012-08-21 with total page 238 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book presents empirical analyses of manufacturing firm performance in Africa based on the World Bank Enterprise Survey and on a one-time quantitative survey conducted for the World Bank by the Center for the Study of African Economies of Oxford University.
Download or read book Global Manufacturing Technology Transfer written by Adedeji B. Badiru and published by CRC Press. This book was released on 2015-06-24 with total page 370 pages. Available in PDF, EPUB and Kindle. Book excerpt: Global Manufacturing Technology Transfer: Africa-USA Strategies, Adaptations, and Management presents practical strategies for developing and sustaining manufacturing technology transfers. It is particularly useful for helping developing nations achieve and sustain a solid footing of economic development through manufacturing. The book examines Afr
Download or read book World Class Manufacturing Casebook written by Richard Schonberger and published by Simon and Schuster. This book was released on 1987 with total page 291 pages. Available in PDF, EPUB and Kindle. Book excerpt: This casebook, designed as a companion volume to Richard J. Schonberger's "World Class Manufacturing: The Lessons of Simplicity Applied," contains 26 cases that let students of WCM concepts solve actual JIT and TQC implementation problems in a wide variety of manufacturing and corporate settings. For readers with specific concerns, each case lists the topics covered (i.e., kanban, total preventive maintenance, partnership with customer) and each case includes questions on issues that companies commonly face in implementing WCM concepts. Dr. Schonberger also explains two JIT and TQC concepts not previously published -- micro-JIT analysis of shop-floor conditions by ratios and the "naturalistic" approach to quality improvement.
Download or read book Global Production written by Pol Antràs and published by Princeton University Press. This book was released on 2020-10-13 with total page 336 pages. Available in PDF, EPUB and Kindle. Book excerpt: Global Production is the first book to provide a fully comprehensive overview of the complicated issues facing multinational companies and their global sourcing strategies. Few international trade transactions today are based on the exchange of finished goods; rather, the majority of transactions are dominated by sales of individual components and intermediary services. Many firms organize global production around offshoring parts, components, and services to producers in distant countries, and contracts are drawn up specific to the parties and distinct legal systems involved. Pol Antràs examines the contractual frictions that arise in the international system of production and how these frictions influence the world economy. Antràs discusses the inevitable complications that develop in contract negotiation and execution. He provides a unified framework that sheds light on the factors helping global firms determine production locations and other organizational choices. Antràs also implements a series of systematic empirical tests, based on recent data from the U.S. Customs and Census Offices, which demonstrate the relevance of contractual factors in global production decisions. Using an integrated approach, Global Production is an excellent resource for researchers, graduate students, and advanced undergraduates interested in the inner workings of international economics and trade.
Download or read book Information Technology for Manufacturing written by National Research Council and published by National Academies Press. This book was released on 1995-02-27 with total page 190 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book describes a vision of manufacturing in the twenty-first century that maximizes efficiencies and improvements by exploiting the full power of information and provides a research agenda for information technology and manufacturing that is necessary for success in achieving such a vision. Research on information technology to support product and process design, shop-floor operations, and flexible manufacturing is described. Roles for virtual manufacturing and the information infrastructure are also addressed. A final chapter is devoted to nontechnical research issues.
Download or read book The Pan Industrial Revolution written by Richard D'Aveni and published by Houghton Mifflin Harcourt. This book was released on 2018-10-16 with total page 325 pages. Available in PDF, EPUB and Kindle. Book excerpt: The acclaimed author of Strategic Capitalism presents a provocative new vision of global industry in the age of 3-D printing: “essential business reading” (Kirkus, starred review). With books like Hypercompetition and Strategic Capitalism, Richard D’Aveni has established himself as a business strategist of uncanny prescience. In The Pan-Industrial Revolution, he demonstrates how the advent of industrial‑scale 3‑D printing is already happening under the radar, and that it will have a far‑reaching impact that most corporate and governmental leaders have yet to anticipate or understand. 3-D printing, now called additive manufacturing, has moved far beyond a desktop technology used by hobbyists to churn out trinkets and toys. In this eye-opening account, D’Aveni reveals how recent breakthroughs have been secretly adapted by Fortune 500 companies to revolutionize the manufacture jet engines, airplanes, automobiles, and so much more. D’Aveni explains how this technology will transform the landscape of manufacturing, and the dramatic effect this change will have on the world economy. A handful of massively powerful corporations—what D’Aveni calls pan‑industrials—will become as important as any tech giant in re-structuring the global order.
