Download or read book Manufacturing Transformation written by Carol Newman and published by Oxford University Press. This book was released on 2016 with total page 324 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book addresses three questions: Why is there so little industry in Africa? Does it matter? And, what can be done about it? It gives some of the results of a four year research programme by national and international researchers into what makes firms in low-income countries more competitive and what makes countries more attractive to competitive firms. The book fills an important gap in development economics and African studies. There is no other book on themarket devoted to such a comprehensive, comparative, cross-country analysis of Africa's industrialization experience. Both the policy conclusions drawn from the comparative analysis and the case studiesin their own right will be of substantial interest to readers. Policy makers in governments and international development agencies in particular will find the book useful and provocative. This is an open access title available under the terms of a CC BY-NC-SA 3.0 IGO licence. It is free to read at Oxford Scholarship Online and offered as a free PDF download from OUP and selected open access locations.

Download or read book Smart Digital Manufacturing written by Rene Wolf and published by John Wiley & Sons. This book was released on 2020-10-02 with total page 116 pages. Available in PDF, EPUB and Kindle. Book excerpt: The world progresses toward Industry 4.0, and manufacturers are challenged to successfully navigate this unique digital journey. To some, digitalization is a golden opportunity; to others, it is a necessary evil. But to optimist and pessimist alike, there is a widespread puzzlement over the practical details of digitalization. To many manufacturers, digital transformation is a vague and confusing concept they nevertheless must grapple with in order to survive the Fourth Industrial Revolution. The proliferation of digital manufacturing technologies adds to the confusion, leaving many manufacturers perplexed and unprepared, with little real insight into how emerging technologies can help them sustain a competitive edge in their markets. This book effectively conveys Siemens's knowledge and experience through a concept called "Smart Digital Manufacturing," a stepwise approach to realizing the promise of the Fourth Industrial Revolution. The Smart Digital Manufacturing roadmap provides guidance and enables low-risk, high-reward adoption of new manufacturing software technologies through a series of tipping-point investment decisions that result in optimized manufacturing performance. The book provides readers with a clear understanding of what digital technology has to offer them, and how and when to invest in these essential components of tomorrow?s factories. René Wolf is Senior Vice President of Manufacturing Operations Management Software for Siemens Digital Industries Software, a business unit of the Siemens Digital Factory Division. Raffaello Lepratti is Vice President of Business Development and Marketing for Siemens Digital Industries Software.

Download or read book Industrial Transformation written by Om Prakash Jena and published by CRC Press. This book was released on 2022 with total page 20 pages. Available in PDF, EPUB and Kindle. Book excerpt: "This book focuses on industrial development, design, implementation, and transformation using technologies such as Artificial Intelligence, Machine Learning, the Internet of Things, Big Data Analysis, and Blockchain. It aims to incorporate complex processes, functions, and various components as one central component of digital systems. Industrial Transformation: Implementation and Essential Components and Processes of Digital Systems discusses the industry transformation aligned with the computerization of manufacturing and the concept of required skills needed to build a new workforce. The book covers the role that AI plays in the management of resource flow and decision-making in the transformation of operations and supply chain management. It presents sustainability efficiency with IoT, Machine Learning, Data Analysis, and Blockchain technologies as it focuses on industrial development, design, and implementation. The book showcases the incorporation of complex processes and functions as one central component of digital systems and explores current trends that are working to accelerate the industrial transformation. Case studies are also included that depict the technologies that are influencing the transition of the fourth industrial revolution such as industrial infrastructure, biodiversity, and production enhancement. This book is aimed at researchers, scholars, and students that require real-time applications and knowledge where the transformation and implementation of digital systems in the manufacturing sector are needed"--

Download or read book Technological Change and Industrial Transformation written by Vicky Xiaoyan Long and published by Routledge. This book was released on 2021-08-18 with total page 186 pages. Available in PDF, EPUB and Kindle. Book excerpt: Industrial transformation is a research and teaching field with a focus on the phenomenon and mechanisms of industrial development and renewal. It concerns changes in economic activities caused by innovation, competition and collaboration, and has a rich heritage of evolutionary economics, institutional economics, industrial dynamics, technology history and innovation studies. It borrows concepts and models from the social sciences (sociology, history, political sciences, business/management, economics, behavioural sciences) and also from technology and engineering studies. In this book, the authors present the key theories, frameworks and concepts of industrial transformation and use empirical cases to describe and explain the causes, processes and outcomes of transformation in the context of digitalization and sustainability. They stress that industrial transformation consists both of Darwinian "survival of the fittest" selection, and of intentional pursuits of innovation, and of industrial capabilities creation. The work argues that managing the global trends of transformation is not only about new technology and innovation: existing institutional settings and dynamic interactions between technological change, organizational adaptation and economic activities also have a profound impact on future trajectories. The areas under investigation are of great relevance for strategic management decisions and industrial and technology policies, and understanding the mechanisms underlying transformation and sustainable growth.

Download or read book SUCCESSFUL MANUFACTURING TRANSFORMATION written by Dr Azlan Nithia and published by Partridge Publishing Singapore. This book was released on 2024-04-03 with total page 280 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book is a good practical handbook for every manufacturing leaders and it is based on proven and successful manufacturing transformation practices, on how to get a manufacturing organization out of an extreme operational crisis (or nearing a closure). Transforming an organization in crisis and turning it around from a manufacturing crisis and finally to be able to achieve global competitiveness in manufacturing operations in any country. This book is based on extensive work experience, learning from failures and successes, experimentations, and proven approaches by the author himself. It references to the author’s various successful manufacturing transformations achieved at large-scale multi-national manufacturing organizations and how the author re-positioned those organizations into becoming a globally competitive operation. If an organization is always thinking about global competitiveness, and constantly driving its organization towards world class efficiencies, delivering the sustainable competitiveness in cost and with the best lead-times, it is almost impossible to get eliminated by any other competitions globally. The manufacturing organizations that slowly starts to slip away from being at world class efficiencies and its metrics start losing its global competitiveness, in cost, lead time and productivity will not be able to compete with the global competitions. These are the organizations that will easily get into a manufacturing crisis, loses its competitiveness and finally it loses its total business to its competitors. These companies will ultimately get wiped out of the business. This book is also about reimagining the manufacturing industries to achieve global competitiveness by the successful adoption of greater digital technologies of a connected factory to increase efficiency, speed and agility. This requires the ability to be able to rapidly transit into the new smart manufacturing paradigm with how to achieve the status of Smart Manufacturing, Factory of the Future and to be quick in responding to the demanding market changes with the digitally connected operations and the marketplace. A detailed step by step approach is clearly explained and how to overcome those implementation challenges.

Download or read book Industry 4 0 Managing The Digital Transformation written by Alp Ustundag and published by Springer. This book was released on 2017-09-14 with total page 293 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book provides a comprehensive guide to Industry 4.0 applications, not only introducing implementation aspects but also proposing a conceptual framework with respect to the design principles. In addition, it discusses the effects of Industry 4.0, which are reflected in new business models and workforce transformation. The book then examines the key technological advances that form the pillars of Industry 4.0 and explores their potential technical and economic benefits using examples of real-world applications. The changing dynamics of global production, such as more complex and automated processes, high-level competitiveness and emerging technologies, have paved the way for a new generation of goods, products and services. Moreover, manufacturers are increasingly realizing the value of the data that their processes and products generate. Such trends are transforming manufacturing industry to the next generation, namely Industry 4.0, which is based on the integration of information and communication technologies and industrial technology.The book provides a conceptual framework and roadmap for decision-makers for this transformation

Download or read book Industrial Transformation Key to Sustaining the Productivity Boom written by and published by . This book was released on 2003 with total page 12 pages. Available in PDF, EPUB and Kindle. Book excerpt:

Download or read book Understanding Industrial Transformation written by Xander Olsthoorn and published by Springer Science & Business Media. This book was released on 2006-02-21 with total page 238 pages. Available in PDF, EPUB and Kindle. Book excerpt: When facing momentous societal change, such as the transformation to a sustainable world, the sciences must impress their importance upon the public and convince scientific and policy institutions in order to obtain the means to carry out their mission. This book represents the first attempt to integrate disciplinary views on the topic of transformation towards sustainability.

Download or read book Manufacturing Cost Policy Deployment MCPD Transformation written by Alin Posteuca and published by Taylor & Francis. This book was released on 2018-01-31 with total page 253 pages. Available in PDF, EPUB and Kindle. Book excerpt: Achieving a long-term acceptable level of manufacturing profitability through productivity requires the total commitment of management teams and all staff in any manufacturing company and beyond. Awareness and continuous improvement of manufacturing costs behind losses and waste is the core goal of the Manufacturing Cost Policy Deployment (MCPD). Achieving this goal will continually uncover the hidden reserves of profitability through a harmonious transformation of the manufacturing flow, coordinated by the continuous need to improve manufacturing costs. Setting annual targets and means for manufacturing costs improvement (more exactly for costs of losses and waste, and the exact fulfillment of these) requires mobilization of all people in the company to carry out systematic improvement activities (kaizen) and systemic improvement actions (kaikaku) of the processes of each product family cost. The MCPD system was born out of careful observation of the challenges, principles, and phenomena of manufacturing companies and the profound discussions with the people in these companies at all levels. Manufacturing Cost Policy Deployment (MCPD) Transformation: Uncovering Hidden Reserves of Profitability is organized in three sections. The first section presents the concept and the need for an MCPD system from a managerial perspective. In the second section, the transformation of manufacturing companies through the MCPD system is presented, more precisely the details of the initial steps of the implementation of the MCPD, the three phases and the seven steps of the MCPD, and the elements necessary for a constant and consistent application of the MCPD. In the last section, there are two examples of the MCPD implementation in two different types of industries, namely, manufacturing and assembly industry and process industry, and two case studies for the improvement of manufacturing costs for each (cost of equipment setup loss, using kaizenshiro; replacement of bottleneck equipment and associated costs of losses, using kaikaku; cost of quality losses with improving operators’ skills to sustain quality, using kaizen; and cost problem solving with the consumption of lubricants for one of the equipment, using A3).

Download or read book OECD Development Pathways Production Transformation Policy Review of Bangladesh Investing in the Future of a Trading Nation written by OECD and published by OECD Publishing. This book was released on 2023-09-12 with total page 139 pages. Available in PDF, EPUB and Kindle. Book excerpt: Half a century after independence, Bangladesh has achieved impressive progress. The country has transformed from one of the poorest nations into a global textile manufacturing hub capable of meeting its medical needs almost entirely through domestic pharmaceutical production.

Download or read book The Digital Transformation of Logistics written by Mac Sullivan and published by John Wiley & Sons. This book was released on 2021-03-30 with total page 480 pages. Available in PDF, EPUB and Kindle. Book excerpt: The digital transformation is in full swing and fundamentally changes how we live, work, and communicate with each other. From retail to finance, many industries see an inflow of new technologies, disruption through innovative platform business models, and employees struggling to cope with the significant shifts occurring. This Fourth Industrial Revolution is predicted to also transform Logistics and Supply Chain Management, with delivery systems becoming automated, smart networks created everywhere, and data being collected and analyzed universally. The Digital Transformation of Logistics: Demystifying Impacts of the Fourth Industrial Revolution provides a holistic overview of this vital subject clouded by buzz, hype, and misinformation. The book is divided into three themed-sections: Technologies such as self-driving cars or virtual reality are not only electrifying science fiction lovers anymore, but are also increasingly presented as cure-all remedies to supply chain challenges. In The Digital Transformation of Logistics: Demystifying Impacts of the Fourth Industrial Revolution, the authors peel back the layers of excitement that have grown around new technologies such as the Internet of Things (IoT), 3D printing, Robotic Process Automation (RPA), Blockchain or Cloud computing, and show use cases that give a glimpse about the fascinating future we can expect. Platforms that allow businesses to centrally acquire and manage their logistics services disrupt an industry that has been relationship-based for centuries. The authors discuss smart contracts, which are one of the most exciting applications of Blockchain, Software as a Service (SaaS) offerings for freight procurement, where numerous data sources can be integrated and decision-making processes automated, and marine terminal operating systems as an integral node for shipments. In The Digital Transformation of Logistics: Demystifying Impacts of the Fourth Industrial Revolution, insights are shared into the cold chain industry where companies respond to increasing quality demands, and how European governments are innovatively responding to challenges of cross-border eCommerce. People are a vital element of the digital transformation and must be on board to drive change. The Digital Transformation of Logistics: Demystifying Impacts of the Fourth Industrial Revolution explains how executives can create sustainable impact and how competencies can be managed in the digital age - especially for sales executives who require urgent upskilling to remain relevant. Best practices are shared for organizational culture change, drawing on studies among senior leaders from the US, Singapore, Thailand, and Australia, and for managing strategic alliances with logistics service providers to offset risks and create cross-functional, cross-company transparency. The Digital Transformation of Logistics: Demystifying Impacts of the Fourth Industrial Revolution provides realistic insights, a ready-to-use knowledge base, and a working vocabulary about current activities and emerging trends of the Logistics industry. Intended readers are supply chain professionals working for manufacturing, trading, and freight forwarding companies as well as students and all interested parties.

Download or read book Digital Transformation in Smart Manufacturing written by Antonella Petrillo and published by BoD – Books on Demand. This book was released on 2018-02-28 with total page 158 pages. Available in PDF, EPUB and Kindle. Book excerpt: The purpose of this book is to provide an overview of the new industrial revolution: the "Industry 4.0." Globalization and competitiveness are forcing companies to review and improve their production processes. Industry 4.0 is a revolution that involves many different sectors and is still evolving. It represents the integration of tools already used in the past (big data, cloud, robot, 3D printing, simulation, etc.) that are now connected to a smart network by transmitting digital data at high speeds. The implementation of a 4.0 system represents a huge change for companies, which are faced with big investments. The idea of the book is to present practices, challenges, and opportunities related to the Industry 4.0. This book is intended to be a useful resource for anyone who deals with this issue.

Download or read book Industrial Transformation written by Om Prakash Jena and published by CRC Press. This book was released on 2022-05-09 with total page 374 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book focuses on industrial development, design, implementation, and transformation using technologies such as Artificial Intelligence, Machine Learning, the Internet of Things (IoT), Big Data Analysis, and Blockchain. It incorporates complex processes, functions, and various other elements as one central component of digital systems. Industrial Transformation: Implementation and Essential Components and Processes of Digital Systems discusses the industry transformation aligned with the computerization of manufacturing and the required skills needed to build a new workforce. This book covers the role that AI plays in the management of resource flow and decision-making in the transformation of operations, as well as supply chain management. It presents sustainability and efficiency with IoT, Machine Learning, Data Analysis, and Blockchain technologies as it focuses on industrial development, design, and implementation. This book showcases the incorporation of complex processes and functions as one central component of digital systems and explores current trends that are working to accelerate industrial transformation. Case studies are also included, depicting the technologies that are influencing the transition into the fourth Industrial Revolution, such as industrial infrastructure, biodiversity, and enhanced productivity. This book is aimed at researchers, scholars, and students that require real-time knowledge and applications where the transformation and implementation of digital systems in the manufacturing sector are needed.

Download or read book When Worlds Collide in Manufacturing Operations written by Charlie Gifford and published by ISA. This book was released on 2011 with total page 285 pages. Available in PDF, EPUB and Kindle. Book excerpt: Book 2.0 is the second collection of public methodology white papers from the ISA-95/MESA Best Practices Working Group. The methodology white papers focus on applying the ISA-95 standards to accelerate the adoption of Manufacturing Operations Management (MOM) systems and the Manufacturing 2.0 Architecture (Mfg 2.0) approach.

Download or read book OECD Development Pathways Production Transformation Policy Review of Chile Reaping the Benefits of New Frontiers written by OECD and published by OECD Publishing. This book was released on 2018-01-09 with total page 154 pages. Available in PDF, EPUB and Kindle. Book excerpt: Chile is a relatively stable, well-connected, open economy. Over the last decade the country has managed to increase its participation in global value chains and to export new products.

Download or read book New Perspectives and Possibilities in Strategic Management in the 21st Century Between Tradition and Modernity written by Martínez-Falcó, Javier and published by IGI Global. This book was released on 2023-07-28 with total page 532 pages. Available in PDF, EPUB and Kindle. Book excerpt: The field of strategic management is facing new challenges, as two phenomena, sustainability, and information and communication technologies, have altered the classic pillars of business strategy. These far-reaching changes require companies to make rapid adaptations in order to achieve optimal situations, which can no longer be developed as they did in the past. To help academics and managers understand the new fields of study and research within strategic management, Javier Martínez-Falcó, Assistant Professor at the University of Alicante, has written a groundbreaking book, New Perspectives and Possibilities in Strategic Management in the 21st Century: Between Tradition and Modernity. This book is an essential guide for reflection and critique, offering insights into the new currents and challenges of the discipline, shedding light on the modernization of strategies in the corporate world. It addresses the renewal and future directions of the field, covering topics such as sustainability, circular economy, green innovation, and information and communication technologies, including blockchain, big data, artificial intelligence, and IoT. The book serves as a must-read for academics, academic students, and policymakers interested in gaining a deeper understanding of current issues impacting deliberate business planning and organization. It also serves as a valuable support material for undergraduate and master's business students, providing a comprehensive understanding of the new fields of study in the discipline. This book is an excellent addition to any academic collection and offers a thought-provoking perspective on strategic management.

Download or read book Successful Manufacturing Transformation written by Dr Azlan Nithia and published by Partridge Publishing Singapore. This book was released on 2024-04-03 with total page 0 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book is a good practical handbook for every manufacturing leaders and it is based on proven and successful manufacturing transformation practices, on how to get a manufacturing organization out of an extreme operational crisis (or nearing a closure). Transforming an organization in crisis and turning it around from a manufacturing crisis and finally to be able to achieve global competitiveness in manufacturing operations in any country. This book is based on extensive work experience, learning from failures and successes, experimentations, and proven approaches by the author himself. It references to the author's various successful manufacturing transformations achieved at large-scale multi-national manufacturing organizations and how the author re-positioned those organizations into becoming a globally competitive operation. If an organization is always thinking about global competitiveness, and constantly driving its organization towards world class efficiencies, delivering the sustainable competitiveness in cost and with the best lead-times, it is almost impossible to get eliminated by any other competitions globally. The manufacturing organizations that slowly starts to slip away from being at world class efficiencies and its metrics start losing its global competitiveness, in cost, lead time and productivity will not be able to compete with the global competitions. These are the organizations that will easily get into a manufacturing crisis, loses its competitiveness and finally it loses its total business to its competitors. These companies will ultimately get wiped out of the business. This book is also about reimagining the manufacturing industries to achieve global competitiveness by the successful adoption of greater digital technologies of a connected factory to increase efficiency, speed and agility. This requires the ability to be able to rapidly transit into the new smart manufacturing paradigm with how to achieve the status of Smart Manufacturing, Factory of the Future and to be quick in responding to the demanding market changes with the digitally connected operations and the marketplace. A detailed step by step approach is clearly explained and how to overcome those implementation challenges.