Download or read book Manufacturing Systems Design and Analysis written by Bin Wu and published by . This book was released on 1992 with total page 440 pages. Available in PDF, EPUB and Kindle. Book excerpt:

Download or read book Design and Analysis of Integrated Manufacturing Systems written by W. Dale Compton and published by National Academies Press. This book was released on 1988-02-01 with total page 248 pages. Available in PDF, EPUB and Kindle. Book excerpt: Design and Analysis of Integrated Manufacturing Systems is a fresh look at manufacturing from a systems point of view. This collection of papers from a symposium sponsored by the National Academy of Engineering explores the need for new technologies, the more effective use of new tools of analysis, and the improved integration of all elements of manufacturing operations, including machines, information, and humans. It is one of the few volumes to include detailed proposals for research that match the needs of industry.

Download or read book Manufacturing Systems Modeling and Analysis written by Guy L. Curry and published by Springer Science & Business Media. This book was released on 2010-11-10 with total page 350 pages. Available in PDF, EPUB and Kindle. Book excerpt: This text presents the practical application of queueing theory results for the design and analysis of manufacturing and production systems. This textbook makes accessible to undergraduates and beginning graduates many of the seemingly esoteric results of queueing theory. In an effort to apply queueing theory to practical problems, there has been considerable research over the previous few decades in developing reasonable approximations of queueing results. This text takes full advantage of these results and indicates how to apply queueing approximations for the analysis of manufacturing systems. Support is provided through the web site http://msma.tamu.edu. Students will have access to the answers of odd numbered problems and instructors will be provided with a full solutions manual, Excel files when needed for homework, and computer programs using Mathematica that can be used to solve homework and develop additional problems or term projects. In this second edition a separate appendix dealing with some of the basic event-driven simulation concepts has been added.

Download or read book Modeling and Analysis of Manufacturing Systems written by Ronald G. Askin and published by John Wiley & Sons. This book was released on 1993-01-18 with total page 488 pages. Available in PDF, EPUB and Kindle. Book excerpt: Manufacturing models - Assembly lines : reliable serial systems - Transfer lines and general serial systems - Shop scheduling with many products - Flexible manufacturing systems - Machine setup and operation sequencing - Material handling systems - Warehousing : storage and retrieval systems - General manufacturing systems : analytical queueing models - General manufacturing systems : empirical simulation models.

Download or read book Manufacturing Systems Design and Analysis written by B. Wu and published by Springer Science & Business Media. This book was released on 2012-12-06 with total page 424 pages. Available in PDF, EPUB and Kindle. Book excerpt: A technological book is written and published for one of two reasons: it either renders some other book in the same field obsolete or breaks new ground in the sense that a gap is filled. The present book aims to do the latter. On my return from industry to an academic career, I started writing this book because I had seen that a gap existed. Although a great deal of information appeared in the published literature about various technical aspects of advanced manufacturing technology (AMT), surprisingly little had been written about the systems con text within which the sophisticated hardware and software of AMT are utilized to increase efficiency. Therefore, I have attempted in this book to show how structured approaches in the design and evaluation of modern manufacturing plant may be adopted, with the objective of improving the performance of the factory as a whole. I hope this book will be a contribution to the newly recognized, multidisciplinary engineering function known as manufacturing sys tems engineering. The text has been designed specifically to demonstrate the systems aspects of modern manufacturing operations, including: systems con cepts of manufacturing operation; manufacturing systems modelling and evalua tion; and the structured design of manufacturing systems~ One of the major difficulties associated with writing a text of this nature stems from the diversity of the topics involved. I have attempted to solve this problem by adopting an overall framework into which the relevant topics are fitted.

Download or read book Flexible Manufacturing Systems in Practice written by Joseph Talavage and published by CRC Press. This book was released on 2020-09-10 with total page 377 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book has been written for all those interested in flexible manufacturing systems (FMS) and other forms of computerized manufacturing systems (CMS). It deals with many aspects of the design, operation, and simulation of FMS and explains the origins of FMS.

Download or read book Cellular Manufacturing Systems written by N. Singh and published by Springer Science & Business Media. This book was released on 2012-12-06 with total page 287 pages. Available in PDF, EPUB and Kindle. Book excerpt: Batch manufactcring is a dominant manufacturing activity in the world, generating a great deal of industrial output. In the coming years, we are going to witness an era of mass customization of products. The major problems in batch manufacturing are a high level of product variety and small manufacturing lot sizes. The product variations present design engineers with the problem of designing many different parts. The decisions made in the design stage significantly affect manufacturing cost, quality and delivery lead times. The impacts of these product variations in manufacturing are high investment in equipment, high tooling costs, complex scheduling and loading, lengthy setup time and costs, excessive scrap and high quality control costs. However, to compete in a global market, it is essential to improve the productivity in small batch manufacturing industries. For this purpose, some innovative methods are needed to reduce product cost, lead time and enhance product quality to help increase market share and profitability. What is also needed is a higher level of integration of the design and manufacturing activities in a company. Group technology provides such a link between design and manufacturing. The adoption of group technology concepts, which allow for small batch production to gain economic advantages similar to mass production while retaining the flexibility of job shop methods, will help address some of the problems.

Download or read book Planning Design and Analysis of Cellular Manufacturing Systems written by A.K. Kamrani and published by Newnes. This book was released on 1995-04-11 with total page 401 pages. Available in PDF, EPUB and Kindle. Book excerpt: Leading researchers in the field of cellular manufacturing systems from academia and industry have contributed to this volume. The book aims to report the latest developments and address the central issues in the design and implementation of cellular manufacturing systems. Cellular Manufacturing (CM) is one of the major concepts used in the design of flexible manufacturing systems. CM, also known as group production or family programming, can be described as a manufacturing technique that produces families of parts within a single line or cell of machines. The first part of the book describes various techniques for design and modeling of cellular manufacturing systems. The second part is concerned with performance measure and analysis, followed by a section which presents the applications of artifical intelligence and computer tools in cellular manufacturing systems.

Download or read book Manufacturing and Supply Systems Management written by B. Wu and published by Springer Science & Business Media. This book was released on 2012-12-06 with total page 542 pages. Available in PDF, EPUB and Kindle. Book excerpt: In order to compete in an increasingly demanding market, many manufacturing companies have to redesign or restructure their manufacturing systems so that a set of coherent manufacturing strategies can be supported. So this book aims to provide a comprehensive treatment of manufacturing strategy analysis (MSA) and manufacturing systems design (MSD). The strategic concerns of manufacturing are linked to subsequent manufacturing systems design activities through the use of an effective MSA/MSD interface. Topics include: A structured approach to formulating manufacturing strategies; A set of linking processes to translate MSA concerns into relevant MSD action plans; Case studies. This book is intended to help graduates and industry-based professionals to make more informed decisions when working on system-design or redesign projects.

Download or read book Design Synthesis written by Graeme Arthur Britton and published by CRC Press. This book was released on 2013-10-28 with total page 362 pages. Available in PDF, EPUB and Kindle. Book excerpt: The biggest challenge in any marketplace is uncertainty. The major changes taking place in world economies, politics, and demographics has raised market uncertainty to its highest level in the past 50 years. However, with new markets opening up in emerging and developing economies, the opportunities have never been better. To compete in this challe

Download or read book Design of Flexible Production Systems written by Tullio Tolio and published by Springer Science & Business Media. This book was released on 2008-12-11 with total page 308 pages. Available in PDF, EPUB and Kindle. Book excerpt: In the last decade, the production of mechanical components to be assembled in final products produced in high volumes (e.g. cars, mopeds, industrial vehicles, etc.) has undergone deep changes due to the overall modifications in the way companies compete. Companies must consider competitive factors such as short lead times, tight product tolerances, frequent market changes and cost reduction. Anyway, companies often have to define production objectives as trade-offs among these critical factors since it can be difficult to improve all of them. Even if system flexibility is often considered a fundamental requirement for firms, it is not always a desirable characteristic of a system because it requires relevant investment cost which can jeopardize the profitability of the firm. Dedicated systems are not able to adapt to changes of the product characteristics while flexible systems offer more flexibility than what is needed, thus increasing investment and operative costs. Production contexts characterized by mid to high demand volume of well identified families of products in continuous evolution do not require the highest level of flexibility; therefore, manufacturing system flexibility must be rationalized and it is necessary to find out the best trade-off between productivity and flexibility by designing manufacturing systems endowed with the right level of flexibility required by the production problem. This new class of production systems can be named Focused Flexibility Manufacturing Systems-FFMSs. The flexibility degree in FFMSs is related to their ability to cope with volume, mix and technological changes, and it must take into account both present and future changes. The required level of system flexibility impacts on the architecture of the system and the explicit design of flexibility often leads to hybrid systems, i.e. automated integrated systems in which parts can be processed by both general purpose and dedicated machines. This is a key issue of FFMSs and results from the matching of flexibility and productivity that respectively characterize FMSs and Dedicated Manufacturing Systems (DMSs). The market share of the EU in the machine tool sector is 44%; the introduction of focused flexibility would be particularly important for machine tool builders whose competitive advantage is based on the ability of customizing their systems on the basis of needs of their customers. In fact, even if current production contexts frequently present situations which would fit well with the FFMS approach, tradition and know-how of machine tool builders play a crucial role. Firms often agree with the focused flexibility vision, nevertheless they decide not to pay the risk and efforts related to the design of this new system architecture. This is due also to the lack of well-structured design approaches which can help machine tool builders to configure innovative systems. Therefore, the FFMS topic is studied through the book chapters following a shared mission: "To define methodologies and tools to design production systems with a minimum level of flexibility needed to face, during their lifecycle, the product and process evolution both in the technological and demand aspects. The goal is to find out the optimal trade-off between flexibility and productivity". The book framework follows the architecture which has been developed to address the FFMS Design problem. This architecture is both broad and detailed, since it pays attention to all the relevant levels in a firm hierarchy which are involved in the system design. Moreover, the architecture is innovative because it models both the point of view of the machine tool builder and the point of view of the system user. The architecture starts analyzing Manufacturing Strategy issues and generating the possible demand scenario to be faced. Technological aspects play a key role while solving process plan problems for the products in the part family. Strategic and technological data becomes input when a machine tool builder performs system configuration. The resulting system configurations are possible solutions that a system user considers when planning its system capacity. All the steps of the architecture are deeply studied, developing methods and tools to address each subproblem. Particular attention is paid to the methodologies adopted to face the different subproblems: mathematical programming, stochastic programming, simulation techniques and inverse kinematics have been used. The whole architecture provides a general approach to implement the right degree of flexibility and it allows to study how different aspects and decisions taken in a firm impact on each other. The work presented in the book is innovative because it gives links among different research fields, such as Manufacturing Strategy, Process Plan, System Design, Capacity Planning and Performance Evaluation; moreover, it helps to formalize and rationalize a critical area such as manufacturing system flexibility. The addressed problem is relevant at an academic level but, also, at an industrial level. A great deal of industrial sectors need to address the problem of designing systems with the right degree of flexibility; for instance, automotive, white goods, electrical and electronic goods industries, etc. Attention to industrial issues is confirmed by empirical studies and real case analyses which are presented within the book chapters.

Download or read book Manufacturing Systems Control Design written by Stjepan Bogdan and published by Springer Science & Business Media. This book was released on 2006-08-02 with total page 312 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book covers all the steps from identification of operations and resources to the transformation of virtual models into real-world algorithms. The matrix-based approach presented here is a solution to the real-time application of control in discrete event systems and flexible manufacturing systems (FMS), and offers a sound practical basis for the design of controllers for manufacturing systems.

Download or read book Reconfigurable Manufacturing Systems From Design to Implementation written by Lyes Benyoucef and published by Springer Nature. This book was released on 2019-10-19 with total page 250 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book develops innovative techniques from operational research and management science for the design and implementation of a reconfigurable manufacturing system (RMS), and subsequently analyzes and assesses their performance. A reconfigurable manufacturing system (RMS) is a paradigm that can address many of the challenges posed by the modern market. Accordingly, substantial research is now being conducted on RMS, focusing on various levels of decision-making (strategic, tactical and operational). However, as a relatively new research area, there are still only very few books and articles available on reconfigurable manufacturing system design and management. In addition to filling that gap, this book provides a forum for investigating, exchanging ideas on, and disseminating the latest advances in the broad area of RMS applications in today’s industry. Gathering contributions by experts from academia, industry and policy-making, it represents an essential contribution to the existing literature on manufacturing and logistics in general and industry 4.0 in particular.

Download or read book System Design Optimization for Product Manufacturing written by Masataka Yoshimura and published by Springer Science & Business Media. This book was released on 2010-02-28 with total page 208 pages. Available in PDF, EPUB and Kindle. Book excerpt: Readers of System Design Optimization for Product Manufacturing will learn about detailed concepts and practical technologies that enable successful product design and manufacture. These concepts and technologies are based on system optimization methodologies that consider a broad range of mechanical, as well as human, factors. System Design Optimization for Product Manufacturing explains the methodologies behind current and future product manufacture. Its detailed explanations of key concepts are relevant not only for product design and manufacture, but also for other business fields. These core concepts and methodologies can be applied to practically any field where informed decision-making is important, and where a range of often conflicting factors must be carefully weighed and considered. System Design Optimization for Product Manufacturing can be used as a fundamental reference book by both engineers and students in the fields of manufacturing, design engineering, and product development.

Download or read book Software Engineering for Manufacturing Systems written by A. Storr and published by Springer Science & Business Media. This book was released on 1996-09-30 with total page 216 pages. Available in PDF, EPUB and Kindle. Book excerpt: Software has become a decisive cost and time factor in regard to developing and establishing manufacturing systems and setting them into operation. In addition, software determines the availability, reliability as well as functionality of manufacturing units. Software Engineering for Manufacturing Systems considers the methods and procedures required to deal with problems in the software engineering of control technology for manufacturing systems. Significantly, the following topics are addressed: * definitions and requirements of software for control technology * system design, describing forms of control software * CASE tools for the generation of a code * configuration, adaption of standard software variants, and re-usability of software * and man-machine interface. It contains the selected proceedings of the International Conference on Software Engineering and Case Tools for Control Technology of Manufacturing Systems, sponsored by the IFIP and held in Germany, in March 1996.

Download or read book Queueing Theory in Manufacturing Systems Analysis and Design written by H.T. Papadopolous and published by Springer Science & Business Media. This book was released on 1993-09-30 with total page 426 pages. Available in PDF, EPUB and Kindle. Book excerpt: The objective of the book is to acquaint the reader with the use of queueing theory in the analysis of manufacturing systems.

Download or read book Flexible Manufacturing Systems in Practice written by Joseph Talavage and published by CRC Press. This book was released on 2020-09-11 with total page 381 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book has been written for all those interested in flexible manufacturing systems (FMS) and other forms of computerized manufacturing systems (CMS). It deals with many aspects of the design, operation, and simulation of FMS and explains the origins of FMS.