Download or read book Advanced Manufacturing written by William B. Bonvillian and published by MIT Press. This book was released on 2018-01-12 with total page 417 pages. Available in PDF, EPUB and Kindle. Book excerpt: How to rethink innovation and revitalize America's declining manufacturing sector by encouraging advanced manufacturing, bringing innovative technologies into the production process. The United States lost almost one-third of its manufacturing jobs between 2000 and 2010. As higher-paying manufacturing jobs are replaced by lower-paying service jobs, income inequality has been approaching third world levels. In particular, between 1990 and 2013, the median income of men without high school diplomas fell by an astonishing 20% between 1990 and 2013, and that of men with high school diplomas or some college fell by a painful 13%. Innovation has been left largely to software and IT startups, and increasingly U.S. firms operate on a system of “innovate here/produce there,” leaving the manufacturing sector behind. In this book, William Bonvillian and Peter Singer explore how to rethink innovation and revitalize America's declining manufacturing sector. They argue that advanced manufacturing, which employs such innovative technologies as 3-D printing, advanced material, photonics, and robotics in the production process, is the key. Bonvillian and Singer discuss transformative new production paradigms that could drive up efficiency and drive down costs, describe the new processes and business models that must accompany them, and explore alternative funding methods for startups that must manufacture. They examine the varied attitudes of mainstream economics toward manufacturing, the post-Great Recession policy focus on advanced manufacturing, and lessons from the new advanced manufacturing institutes. They consider the problem of “startup scaleup,” possible new models for training workers, and the role of manufacturing in addressing “secular stagnation” in innovation, growth, the middle classes, productivity rates, and related investment. As recent political turmoil shows, the stakes could not be higher.
Download or read book In Praise of Hard Industries written by Eamonn Fingleton and published by Houghton Mifflin Harcourt. This book was released on 1999 with total page 296 pages. Available in PDF, EPUB and Kindle. Book excerpt: "In Praise of Hard Industries offers an authoritative and deeply disturbing counterargument to the many unexamined assumptions and glibly misstated facts that are driving our embrace of postindustrialism."--BOOK JACKET.
Download or read book The Role of Innovation and Entrepreneurship in Economic Growth written by Michael J Andrews and published by University of Chicago Press. This book was released on 2022-03-17 with total page 633 pages. Available in PDF, EPUB and Kindle. Book excerpt: "Innovation and entrepreneurship are ubiquitous today, both as fields of study and as starting points for conversations among experts in government and economic development. But while these areas on continue to attract public and private investments, many measurements of their resulting economic growth-including productivity growth and business dynamism-have remained modest. Why this difference? Because not all business sectors are the same, and the transformative gains of some industries have been offset by stagnation or contraction in others. Accordingly, a nuanced understanding of the economy requires a nuanced understanding of where innovation and entrepreneurship occur and where they matter. Answering these questions allows for strategic public investment and the infrastructure for economic growth.The Role of Innovation and Entrepreneurship in Economic Growth, the latest entry in the NBER conference series, seeks to codify these answers. The editors leverage industry studies to identify specific examples of productivity improvements enabled by innovation and entrepreneurship, including those from new production technologies, increased competition, new organizational forms, and other means. Taken together, the volume illuminates whether the contribution of innovation and entrepreneurship to economic growth is likely to be concentrated, be it selected sectors or more broadly"--
Download or read book Information Technology for Manufacturing written by National Research Council and published by National Academies Press. This book was released on 1995-02-27 with total page 190 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book describes a vision of manufacturing in the twenty-first century that maximizes efficiencies and improvements by exploiting the full power of information and provides a research agenda for information technology and manufacturing that is necessary for success in achieving such a vision. Research on information technology to support product and process design, shop-floor operations, and flexible manufacturing is described. Roles for virtual manufacturing and the information infrastructure are also addressed. A final chapter is devoted to nontechnical research issues.
Download or read book The Future of Chinese Manufacturing written by TACHIA Chin and published by Elsevier. This book was released on 2018-05-24 with total page 258 pages. Available in PDF, EPUB and Kindle. Book excerpt: The Future of Chinese Manufacturing: Employment and Labour Challenges gives context and analysis on employment and labor issues in contemporary China, specifically relating to manufacturing industries. With one fifth of the world's workforce, China has taken advantage of its cheap labor to serve as the world's factory, achieving stunning growth for two decades. This book covers the appreciation of RMB, constant increases in minimum wage, shortages of skilled workers in China's labor-intensive manufacturing sector, and the fact that many large multinational corporations (MNCs) must cut costs, and are thus shifting their main production bases to other developing countries. Under such a tough situation, and coupled with the global economic slowdown, manufacturing employment in China confronts severe labor-related challenges, such as high turnover rates, recruitment difficulties for workers, and a series of high profile labor strikes and publicity concerning working conditions. - Integrates human capital and cultural theories - Analyzes looming labor unrest and related workforce issues in China through a unique context-specific lens - Explores the roles that Chinese institutions and culture play in resolving problems related to these issues
Download or read book Performance of Manufacturing Firms in Africa written by Hinh T. Dinh and published by World Bank Publications. This book was released on 2012-08-21 with total page 238 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book presents empirical analyses of manufacturing firm performance in Africa based on the World Bank Enterprise Survey and on a one-time quantitative survey conducted for the World Bank by the Center for the Study of African Economies of Oxford University.
Download or read book Producing Prosperity written by Gary P. Pisano and published by Harvard Business Press. This book was released on 2012-09-25 with total page 186 pages. Available in PDF, EPUB and Kindle. Book excerpt: Manufacturing’s central role in global innovation Companies compete on the decisions they make. For years—even decades—in response to intensifying global competition, companies decided to outsource their manufacturing operations in order to reduce costs. But we are now seeing the alarming long-term effect of those choices: in many cases, once manufacturing capabilities go away, so does much of the ability to innovate and compete. Manufacturing, it turns out, really matters in an innovation-driven economy. In Producing Prosperity, Harvard Business School professors Gary Pisano and Willy Shih show the disastrous consequences of years of poor sourcing decisions and underinvestment in manufacturing capabilities. They reveal how today’s undervalued manufacturing operations often hold the seeds of tomorrow’s innovative new products, arguing that companies must reinvest in new product and process development in the US industrial sector. Only by reviving this “industrial commons” can the world’s largest economy build the expertise and manufacturing muscle to regain competitive advantage. America needs a manufacturing renaissance—for restoring itself, and for the global economy as a whole. This will require major changes. Pisano and Shih show how company-level choices are key to the sustained success of industries and economies, and they provide business leaders with a framework for understanding the links between manufacturing and innovation that will enable them to make better outsourcing decisions. They also detail how government must change its support of basic and applied scientific research, and promote collaboration between business and academia. For executives, policymakers, academics, and innovators alike, Producing Prosperity provides the clearest and most compelling account yet of how the American economy lost its competitive edge—and how to get it back.
Download or read book Manufacturing Engineering Education written by J. Paulo Davim and published by Chandos Publishing. This book was released on 2018-09-19 with total page 172 pages. Available in PDF, EPUB and Kindle. Book excerpt: Manufacturing Engineering Education includes original and unpublished chapters that develop the applications of the manufacturing engineering education field. Chapters convey innovative research ideas that have a prodigious significance in the life of academics, engineers, researchers and professionals involved with manufacturing engineering. Today, the interest in this subject is shown in many prominent global institutes and universities, and the robust momentum of manufacturing has helped the U.S. economy continue to grow throughout 2014. This book covers manufacturing engineering education, with a special emphasis on curriculum development, and didactic aspects. - Includes original and unpublished chapters that develop the applications of the manufacturing engineering education principle - Applies manufacturing engineering education to curriculum development - Offers research ideas that can be applied to the work of academics, engineers, researchers and professionals
Download or read book Manufacturing Strategy written by John Miltenburg and published by CRC Press. This book was released on 2005-03-09 with total page 462 pages. Available in PDF, EPUB and Kindle. Book excerpt: To stay competitive and meet market expectations in a global economy, both domestic and foreign companies must realign their manufacturing processes, make improvements, and increase their manufacturing capabilities. With large numbers of employees working in a network of domestic and foreign facilities, production processes are as varied as the products being produced. Manufacturing managers need a manufacturing plan or strategy that will bring structure to this complex environment. In Manufacturing Strategy: How to Formulate and Implement a Winning Plan, 2nd Edition, John Miltenburg offers a sensible and systematic method to: (1) evaluate domestic and foreign factories and international manufacturing and (2) plan the appropriate manufacturing strategy to be first in the market. Incorporating comments and suggestions from managers who used the first edition of Manufacturing Strategy, John Miltenburg expands and improves on his focus in the areas of: International Manufacturing — where the focus is on a company's international network of factories; Competitive Strategy — where managers must understand the role manufacturing strategy plays in their company's business strategy; and Manufacturing Programs — showing how programs such as quality management, six sigma, agile manufacturing, and supply chain management fit within the manufacturing strategy. Manufacturing Strategy gives managers a common language for dealing with manufacturing problems at both strategic and operational levels. It improves communication between manufacturing managers and those outside manufacturing (who will now have a better understanding of what manufacturing can and cannot do).
Download or read book Trouble in the Making written by Mary Hallward-Driemeier and published by World Bank Publications. This book was released on 2017-10-12 with total page 288 pages. Available in PDF, EPUB and Kindle. Book excerpt: Technology and globalization are threatening manufacturing’s traditional ability to deliver both productivity and jobs at a large scale for unskilled workers. Concerns about widening inequality within and across countries are raising questions about whether interventions are needed and how effective they could be. Trouble in the Making? The Future of Manufacturing-Led Development addresses three questions: - How has the global manufacturing landscape changed and why does this matter for development opportunities? - How are emerging trends in technology and globalization likely to shape the feasibility and desirability of manufacturing-led development in the future? - If low wages are going to be less important in defining competitiveness, how can less industrialized countries make the most of new opportunities that shifting technologies and globalization patterns may bring? The book examines the impacts of new technologies (i.e., the Internet of Things, 3-D printing, and advanced robotics), rising international competition, and increased servicification on manufacturing productivity and employment. The aim is to inform policy choices for countries currently producing and for those seeking to enter new manufacturing markets. Increased polarization is a risk, but the book analyzes ways to go beyond focusing on potential disruptions to position workers, firms, and locations for new opportunities. www.worldbank.org/futureofmanufacturing
Download or read book India s Manufacturing Sector written by and published by Academic Foundation. This book was released on 2003 with total page 366 pages. Available in PDF, EPUB and Kindle. Book excerpt: Released by the Prime Minister of India, Shri Atal Bihari Vajpayee on 24th May, 2003, this book brings together 3 top-ranking independent reports that outlining a comprehensive manufacturing policy framework for India.
Download or read book Manufacturing Independence written by Robert F. Smith (Military historian) and published by Westholme Publishing. This book was released on 2016 with total page 0 pages. Available in PDF, EPUB and Kindle. Book excerpt: The Untold Story of the Industrial Revolution and the American Victory in the War for Independence Benjamin Franklin was serious when he suggested the colonists arm themselves with the longbow. The American colonies were not logistically prepared for the revolution and this became painfully obvious in war's first years. Trade networks were destroyed, inflation undermined the economy, and American artisans could not produce or repair enough weapons to keep the Continental Army in the field. The Continental Congress responded to this crisis by mobilizing the nation's manufacturing sector for war. With information obtained from Europe through both commercial exchange and French military networks, Congress became familiar with the latest manufacturing techniques and processes of the nascent European industrial revolution. They therefore initiated an innovative program of munitions manufacturing under the Department of the Commissary General of Military Stores. The department gathered craftsmen and workers into three national arsenals where they were trained for the large-scale production of weapons. The department also engaged private manufacturers, providing them with materials and worker training, and instituting a program of inspecting their finished products. As historian Robert F. Smith relates in Manufacturing Independence: Industrial Innovation in the American Revolution, the colonies were able to provide their military with the arms it needed to fight, survive, and outlast the enemy--supplying weapons for the victory at Saratoga, rearming their armies in the South on three different occasions, and providing munitions to sustain the siege at Yorktown. But this manufacturing system not only successfully supported the Continental Army, it also demonstrated new production ideas to the nation. Through this system, the government went on to promote domestic manufacturing after the war, becoming a model for how the nation could produce goods for its own needs. The War for Independence was not just a political revolution, it was an integral part of the Industrial Revolution in America.
Download or read book A Research Report on the Development of China s Manufacturing Sector 2016 written by Lianshui Li and published by Springer. This book was released on 2017-04-09 with total page 393 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book investigates key developments in China’s manufacturing industry from the perspectives of general evaluation, regional analysis, industrial analysis and enterprise analysis. Based on data for 1978 to 2013, it details the characteristics of the different stages, typical development patterns, and the international status of China’s manufacturing sector. It also provides an in-depth portrait of China’s new-type manufacturing sector based on four main aspects, namely, economic creativity, technological innovation capability, energy conservation capability, and environmental protection capability, and subsequently assesses the status quo of this sector, analyzes the regional development characteristics, and ranks China’s top 10 provinces and top 10 cities in terms of manufacturing. The book outlines the industrial characteristics of China’s manufacturing sector and analyzes the factors influencing its development and lastly, it examines China’s listed manufacturing enterprises, ranking and providing brief snapshots of the top 50 most respected enterprises. This book is intended for all those interested in the development of China’s manufacturing sector, especially university instructors and students, governmental officials and managerial personnel in the manufacturing sector and related enterprises.
Download or read book Japanese Manufacturing Techniques written by Richard Schonberger and published by Simon and Schuster. This book was released on 1982 with total page 280 pages. Available in PDF, EPUB and Kindle. Book excerpt: Japanese productivity and quality standards have fired the imagination of American managers, but until now there has been little explanation of how to do it -- how to apply Japanese methods at the actual operating level of U.S. manufacturing plants. This book shows you how, exposing otherwise well-informed westernized readers to a new world of management ideas. Author Richard J. Schonberger demonstrates that the Japanese formula for success is based on a number of specific, interrelated techniques -- stunning in their simplicity -- and he shows how these techniques can be put to work in American industries today. Here, in a clear, handbook format, are nine "lessons" for American manufacturers, introducing scores of techniques aimed at simplifying the overly-complex purchasing, inventory, assembly-fine, and quality-control processes of U.S. firms. At the heart of Japanese manufacturing success are two overlapping strategies: "just-in-time" production and "total quality control." Some American manufacturers already know a little about these methods, but Richard Schonberger provides the most comprehensive description of these techniques available: how they developed, how they all fit together, why they are so potent, and how they "snowball" -- unleashing a powerful chain reaction of productivity and quality control improvements each time more simplification is introduced. -- Publisher description.
Download or read book Manufacturing in America written by and published by United States Department of Commerce. This book was released on 2004 with total page 92 pages. Available in PDF, EPUB and Kindle. Book excerpt: “The Army was much embarrassed by the absence of the cavalry,” Robert E. Lee wrote of the Gettysburg campaign, stirring a controversy that continues even today. Lee’s statement was an indirect indictment of Gen. James Ewell Brown (“Jeb”) Stuart, who was the cavalry. This book reexamines the questions that have shadowed the legendary Confederate hero and offers a fresh, informed interpretation of his role at Gettysburg. Avoiding the partisan pros and cons characterizing previous accounts, Warren C. Robinson reassesses the historical record to come to a clearer view of Stuart’s orders for the crucial battle (as well as what was expected of him), of his actual performance, and of the impact his late arrival had on the outcome of the campaign. Though Stuart may not have disobeyed Lee’s orders, Robinson argues, he did abuse the general’s discretion by raiding Washington rather than scouting for the army at Gettysburg—a move that profoundly affected Confederate fortunes and perhaps the war itself.
Download or read book Made in the USA written by Vaclav Smil and published by MIT Press. This book was released on 2013-08-23 with total page 278 pages. Available in PDF, EPUB and Kindle. Book excerpt: An argument that America's economy needs a strong and innovative manufacturing sector and the jobs it creates.
Download or read book The Fourth Industrial Revolution written by Klaus Schwab and published by Crown Currency. This book was released on 2017-01-03 with total page 194 pages. Available in PDF, EPUB and Kindle. Book excerpt: World-renowned economist Klaus Schwab, Founder and Executive Chairman of the World Economic Forum, explains that we have an opportunity to shape the fourth industrial revolution, which will fundamentally alter how we live and work. Schwab argues that this revolution is different in scale, scope and complexity from any that have come before. Characterized by a range of new technologies that are fusing the physical, digital and biological worlds, the developments are affecting all disciplines, economies, industries and governments, and even challenging ideas about what it means to be human. Artificial intelligence is already all around us, from supercomputers, drones and virtual assistants to 3D printing, DNA sequencing, smart thermostats, wearable sensors and microchips smaller than a grain of sand. But this is just the beginning: nanomaterials 200 times stronger than steel and a million times thinner than a strand of hair and the first transplant of a 3D printed liver are already in development. Imagine “smart factories” in which global systems of manufacturing are coordinated virtually, or implantable mobile phones made of biosynthetic materials. The fourth industrial revolution, says Schwab, is more significant, and its ramifications more profound, than in any prior period of human history. He outlines the key technologies driving this revolution and discusses the major impacts expected on government, business, civil society and individuals. Schwab also offers bold ideas on how to harness these changes and shape a better future—one in which technology empowers people rather than replaces them; progress serves society rather than disrupts it; and in which innovators respect moral and ethical boundaries rather than cross them. We all have the opportunity to contribute to developing new frameworks that advance progress.
