Download or read book Manufacturing Processes and Materials for Engineers written by Lawrence E. Doyle and published by Prentice Hall. This book was released on 1969 with total page 862 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Manufacturing Processes and Materials Fourth Edition written by George F. Schrader and published by Society of Manufacturing Engineers. This book was released on 2000 with total page 866 pages. Available in PDF, EPUB and Kindle. Book excerpt: This best-selling textbook for major manufacturing engineering programs across the country masterfully covers the basic processes and machinery used in the job shop, tool room, or small manufacturing facility. At the same time, it describes advanced equipment and processes used in larger production environments. Questions and problems at the end of each chapter can be used as self-tests or assignments. An Instructor's Guide is available to tailor a more structured learning experience. Additional resources from SME, including the Fundamental Manufacturing Processes videotape series can also be used to supplement the book's learning objectives. With 31 chapters, 45 tables, 586 illustrations, 141 equations and an extensive index, Manufacturing Processes & Materials is one of the most comprehensive texts available on this subject.
Download or read book Manufacturing Techniques for Materials written by T.S. Srivatsan and published by CRC Press. This book was released on 2018-04-09 with total page 1091 pages. Available in PDF, EPUB and Kindle. Book excerpt: Manufacturing Techniques for Materials: Engineering and Engineered provides a cohesive and comprehensive overview of the following: (i) prevailing and emerging trends, (ii) emerging developments and related technology, and (iii) potential for the commercialization of techniques specific to manufacturing of materials. The first half of the book provides the interested reader with detailed chapters specific to the manufacturing of emerging materials, such as additive manufacturing, with a valued emphasis on the science, technology, and potentially viable practices specific to the manufacturing technique used. This section also attempts to discuss in a lucid and easily understandable manner the specific advantages and limitations of each technique and goes on to highlight all of the potentially viable and emerging technological applications. The second half of this archival volume focuses on a wide spectrum of conventional techniques currently available and being used in the manufacturing of both materials and resultant products. Manufacturing Techniques for Materials is an invaluable tool for a cross-section of readers including engineers, researchers, technologists, students at both the graduate level and undergraduate level, and even entrepreneurs.
Download or read book Manufacturing Processes for Engineering Materials written by Serope Kalpakjian and published by Pearson Education India. This book was released on 1984 with total page 1036 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Manufacturing Technology written by Helmi A. Youssef and published by CRC Press. This book was released on 2023-08-17 with total page 972 pages. Available in PDF, EPUB and Kindle. Book excerpt: This new edition textbook provides comprehensive knowledge and insight into various aspects of manufacturing technology, processes, materials, tooling, and equipment. Its main objective is to introduce the grand spectrum of manufacturing technology to individuals who will be involved in the design and manufacturing of finished products and to provide them with basic information on manufacturing technologies. Manufacturing Technology: Materials, Processes, and Equipment, Second Edition, is written in a descriptive manner, where the emphasis is on the fundamentals of the process, its capabilities, typical applications, advantages, and limitations. Mathematical modeling and equations are used only when they enhance the basic understanding of the material dealt with. The book is a fundamental textbook that covers all the manufacturing processes, materials, and equipment used to convert the raw materials to a final product. It presents the materials used in manufacturing processes and covers the heat treatment processes, smelting of metals, and other technological processes such as casting, forming, powder metallurgy, joining processes, and surface technology. Manufacturing processes for polymers, ceramics, and composites are also covered. The book also covers surface technology, fundamentals of traditional and nontraditional machining processes, numerical control of machine tools, industrial robots and hexapods, additive manufacturing, and industry 4.0 technologies. The book is written specifically for undergraduates in industrial, manufacturing, mechanical, and materials engineering disciplines of the second to fourth levels to cover complete courses of manufacturing technology taught in engineering colleges and institutions all over the world. It also covers the needs of production and manufacturing engineers and technologists participating in related industries where it is expected to be part of their professional library. Additionally, the book can be used by students in other disciplines concerned with design and manufacturing, such as automotive and aerospace engineering.
Download or read book Manufacturing Processes for Engineering Materials written by Serope Kalpakjian and published by Prentice Hall. This book was released on 2008 with total page 1050 pages. Available in PDF, EPUB and Kindle. Book excerpt: This comprehensive, up-to-date text has balance coverage of the fundamentals of materials and processes, its analytical approaches, and its applications in manufacturing engineering.
Download or read book Manufacturing Processes for Design Professionals written by Rob Thompson and published by Thames & Hudson. This book was released on 2007-11-30 with total page 528 pages. Available in PDF, EPUB and Kindle. Book excerpt: An encyclopaedic guide to production techniques and materials for product and industrial designers, engineers, and architects. Today's product designers are presented with a myriad of choices when creating their work and preparing it for manufacture. They have to be knowledgeable about a vast repertoire of processes, ranging from what used to be known as traditional "crafts" to the latest technology, to enable their designs to be manufactured effectively and efficiently. Information on the internet about such processes is often unreliable, and search engines do not usefully organize material for designers. This fundamental new resource explores innovative production techniques and materials that are having an impact on the design industry worldwide. Organized into four easily referenced parts—Forming, Cutting, Joining, and Finishing—over seventy manufacturing processes are explained in depth with full technical descriptions; analyses of the typical applications, design opportunities, and considerations each process offers; and information on cost, speed, and environmental impact. The accompanying step-by-step case studies look at a product or component being manufactured at a leading international supplier. A directory of more than fifty materials includes a detailed technical profile, images of typical applications and finishes, and an overview of each material's design characteristics. With some 1,200 color photographs and technical illustrations, specially commissioned for this book, this is the definitive reference for product designers, 3D designers, engineers, and architects who need a convenient, highly accessible, and practical reference.
Download or read book Modern Manufacturing Processes written by Muammer Koç and published by John Wiley & Sons. This book was released on 2019-09-04 with total page 549 pages. Available in PDF, EPUB and Kindle. Book excerpt: Provides an in-depth understanding of the fundamentals of a wide range of state-of-the-art materials manufacturing processes Modern manufacturing is at the core of industrial production from base materials to semi-finished goods and final products. Over the last decade, a variety of innovative methods have been developed that allow for manufacturing processes that are more versatile, less energy-consuming, and more environmentally friendly. This book provides readers with everything they need to know about the many manufacturing processes of today. Presented in three parts, Modern Manufacturing Processes starts by covering advanced manufacturing forming processes such as sheet forming, powder forming, and injection molding. The second part deals with thermal and energy-assisted manufacturing processes, including warm and hot hydrostamping. It also covers high speed forming (electromagnetic, electrohydraulic, and explosive forming). The third part reviews advanced material removal process like advanced grinding, electro-discharge machining, micro milling, and laser machining. It also looks at high speed and hard machining and examines advances in material modeling for manufacturing analysis and simulation. Offers a comprehensive overview of advanced materials manufacturing processes Provides practice-oriented information to help readers find the right manufacturing methods for the intended applications Highly relevant for material scientists and engineers in industry Modern Manufacturing Processes is an ideal book for practitioners and researchers in materials and mechanical engineering.
Download or read book Manufacturing Processes 1 written by Fritz Klocke and published by Springer Science & Business Media. This book was released on 2011-05-26 with total page 517 pages. Available in PDF, EPUB and Kindle. Book excerpt: The book series on manufacturing processes for engineers is a reference work for scientific and industrial experts. This volume on Turning, Milling and Drilling starts from the basic principles of machining with geometrically defined cutting edges based on a common active principle. In addition, appropriate tool designs as well as the reasonable use of cutting material are presented. A detailed chapter about the machinability of the most important workpiece materials, such as steel and cast iron, light metal alloys and high temperature resistant materials imparts a broad knowledge of the interrelations between workpiece materials, cutting materials and process parameters. This book is in the RWTHedition Series as are the other four volumes of the reference work.
Download or read book Materials and Manufacturing Processes written by Kaushik Kumar and published by Springer. This book was released on 2019-06-05 with total page 104 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book introduces the materials and traditional processes involved in the manufacturing industry. It discusses the properties and application of different engineering materials as well as the performance of failure tests. The book lists both destructible and non-destructible processes in detail. The design associated with each manufacturing processes, such Casting, Forming, Welding and Machining, are also covered.
Download or read book Manufacturing written by Beno Benhabib and published by CRC Press. This book was released on 2003-07-03 with total page 616 pages. Available in PDF, EPUB and Kindle. Book excerpt: From concept development to final production, this comprehensive text thoroughly examines the design, prototyping, and fabrication of engineering products and emphasizes modern developments in system modeling, analysis, and automatic control. This reference details various management strategies, design methodologies, traditional production techniqu
Download or read book Manufacturing Processes written by H. N. Gupta and published by New Age International. This book was released on 2012-09 with total page 13 pages. Available in PDF, EPUB and Kindle. Book excerpt: Effective from 2008-09 session, U.P.T.U. has introduced the subject of manufacturing processes for first year engineering students of all streams. This textbook covers the entire course material in a distilled form.
Download or read book Manufacturing Processes and Materials written by George F. Schrader and published by . This book was released on 2001-03 with total page pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Advanced Manufacturing Techniques for Engineering and Engineered Materials written by Thanigaivelan, R. and published by IGI Global. This book was released on 2022-03-11 with total page 351 pages. Available in PDF, EPUB and Kindle. Book excerpt: As technology advances, it is imperative to stay current in the newest developments made within the engineering industry and within material sciences. Trends in manufacturing such as 3D printing, casting, welding, surface modification, computer numerical control (CNC), non-traditional, Industry 4.0 ergonomics, and hybrid machining methods must be closely examined to utilize these important resources for the betterment of society. Advanced Manufacturing Techniques for Engineering and Engineered Materials provides a unified and complete overview about the recent and emerging trends, developments, and associated technology with scope for the commercialization of techniques specific to manufacturing materials. This book also reviews the various machining methods for difficult-to-cut materials and novel materials including matrix composites. Covering topics such as agro-waste, conventional machining, and material performance, this book is an essential resource for researchers, engineers, technologists, students and professors of higher education, industry workers, entrepreneurs, researchers, and academicians.
Download or read book Fundamentals of Manufacturing For Engineers written by T F Waters and published by CRC Press. This book was released on 2017-07-12 with total page 342 pages. Available in PDF, EPUB and Kindle. Book excerpt: This textbook will be welcomed throughout engineering education as the one-stop teaching text for students of manufacturing. It takes the student through the fundamental principles and practices of modern manufacturing processes in a lively and informative fashion. Topics include casting, joining, cutting, metal deformation processes, surface treat
Download or read book Handbook of Manufacturing Processes written by James G. Bralla and published by . This book was released on 2007 with total page 868 pages. Available in PDF, EPUB and Kindle. Book excerpt: A comprehensive reference book for those with interest in, or need to know, how operations in the world's factories work, and how common products, components, and materials are made.
Download or read book Manufacturing Processes written by John Barry DuVall and published by Goodheart-Wilcox Publisher. This book was released on 2011-09-15 with total page 0 pages. Available in PDF, EPUB and Kindle. Book excerpt: Donated by Machine Technology / Diesel Mechanics instructor John Clark as supplementary material. 08/27/2019.
