Download or read book Manufacturing Technology written by Helmi A. Youssef and published by CRC Press. This book was released on 2023-08-17 with total page 972 pages. Available in PDF, EPUB and Kindle. Book excerpt: This new edition textbook provides comprehensive knowledge and insight into various aspects of manufacturing technology, processes, materials, tooling, and equipment. Its main objective is to introduce the grand spectrum of manufacturing technology to individuals who will be involved in the design and manufacturing of finished products and to provide them with basic information on manufacturing technologies. Manufacturing Technology: Materials, Processes, and Equipment, Second Edition, is written in a descriptive manner, where the emphasis is on the fundamentals of the process, its capabilities, typical applications, advantages, and limitations. Mathematical modeling and equations are used only when they enhance the basic understanding of the material dealt with. The book is a fundamental textbook that covers all the manufacturing processes, materials, and equipment used to convert the raw materials to a final product. It presents the materials used in manufacturing processes and covers the heat treatment processes, smelting of metals, and other technological processes such as casting, forming, powder metallurgy, joining processes, and surface technology. Manufacturing processes for polymers, ceramics, and composites are also covered. The book also covers surface technology, fundamentals of traditional and nontraditional machining processes, numerical control of machine tools, industrial robots and hexapods, additive manufacturing, and industry 4.0 technologies. The book is written specifically for undergraduates in industrial, manufacturing, mechanical, and materials engineering disciplines of the second to fourth levels to cover complete courses of manufacturing technology taught in engineering colleges and institutions all over the world. It also covers the needs of production and manufacturing engineers and technologists participating in related industries where it is expected to be part of their professional library. Additionally, the book can be used by students in other disciplines concerned with design and manufacturing, such as automotive and aerospace engineering.
Download or read book A Textbook of Production Technology Manufacturing Processes written by P C Sharma and published by S. Chand Publishing. This book was released on 2007 with total page 821 pages. Available in PDF, EPUB and Kindle. Book excerpt: The printing of the seventh edition of the book has provided the author with an opportunity to completely go through the text.Minor Additions and Improvements have been carried out,wherever needed.All the figure work has been redone on computer,with the result that all the figures are clear and sharp.The author is really thankful to M/s S.Chand & Company Ltd. for doing an excellent job in publishing the latest edition of the book.
Download or read book Unit Manufacturing Processes written by National Research Council and published by National Academies Press. This book was released on 1995-01-03 with total page 228 pages. Available in PDF, EPUB and Kindle. Book excerpt: Manufacturing, reduced to its simplest form, involves the sequencing of product forms through a number of different processes. Each individual step, known as an unit manufacturing process, can be viewed as the fundamental building block of a nation's manufacturing capability. A committee of the National Research Council has prepared a report to help define national priorities for research in unit processes. It contains an organizing framework for unit process families, criteria for determining the criticality of a process or manufacturing technology, examples of research opportunities, and a prioritized list of enabling technologies that can lead to the manufacture of products of superior quality at competitive costs. The study was performed under the sponsorship of the National Science Foundation and the Defense Department's Manufacturing Technology Program.
Download or read book Electronics Process Technology written by Wilfried Sauer and published by Springer Science & Business Media. This book was released on 2007-04-21 with total page 493 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book provides a systemized presentation of new techniques and methods in electronics manufacture. It helps the reader reduce the cost and increase the reliability of electronic products by employing up-to-date technology. It also details the latest ideas for reducing the scale of electronic components and products to the nano-scale by organizing all the elements of the complicated modern electronics manufacturing process showing how they affect each other.
Download or read book Manufacturing Processes written by John Barry DuVall and published by Goodheart-Wilcox Publisher. This book was released on 2011-09-15 with total page 0 pages. Available in PDF, EPUB and Kindle. Book excerpt: Donated by Machine Technology / Diesel Mechanics instructor John Clark as supplementary material. 08/27/2019.
Download or read book Introduction to Basic Manufacturing Processes and Workshop Technology written by Rajender Singh and published by New Age International. This book was released on 2006-12 with total page 19 pages. Available in PDF, EPUB and Kindle. Book excerpt: Manufacturing and workshop practices have become important in the industrial environment to produce products for the service of mankind. The basic need is to provide theoretical and practical knowledge of manufacturing processes and workshop technology to all the engineering students. This book covers most of the syllabus of manufacturing processes/technology, workshop technology and workshop practices for engineering (diploma and degree) classes prescribed by different universities and state technical boards.
Download or read book Advanced Manufacturing and Processing Technology written by Chander Prakash and published by CRC Press. This book was released on 2020-10-25 with total page 245 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book disseminates recent research, theories, and practices relevant to the areas of surface engineering and the processing of materials for functional applications in the aerospace, automobile, and biomedical industries. The book focuses on the hidden technologies and advanced manufacturing methods that may not be standardized by research institutions but are greatly beneficial to material and manufacturing industrial engineers in many ways. It details projects, research activities, and innovations in a global platform to strengthen the knowledge of the concerned community. The book covers surface engineering including coating, deposition, cladding, nanotechnology, surface finishing, precision machining, processing, and emerging advanced manufacturing technologies to enhance the performance of materials in terms of corrosion, wear, and fatigue. The book captures the emerging areas of materials science and advanced manufacturing engineering and presents recent trends in research for researchers, field engineers, and academic professionals.
Download or read book Technology and Manufacturing Process Selection written by Elsa Henriques and published by Springer. This book was released on 2014-01-09 with total page 0 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book provides specific topics intending to contribute to an improved knowledge on Technology Evaluation and Selection in a Life Cycle Perspectives. Although each chapter will present possible approaches and solutions, there are no recipes for success. Each reader will find his/her balance in applying the different topics to his/her own specific situation. Case studies presented throughout will help in deciding what fits best to each situation, but most of all any ultimate success will come out of the interplay between the available solutions and the specific problem or opportunity the reader is faced with.
Download or read book Information Technology for Manufacturing written by National Research Council and published by National Academies Press. This book was released on 1995-02-27 with total page 190 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book describes a vision of manufacturing in the twenty-first century that maximizes efficiencies and improvements by exploiting the full power of information and provides a research agenda for information technology and manufacturing that is necessary for success in achieving such a vision. Research on information technology to support product and process design, shop-floor operations, and flexible manufacturing is described. Roles for virtual manufacturing and the information infrastructure are also addressed. A final chapter is devoted to nontechnical research issues.
Download or read book MANUFACTURING PROCESSES 4 5 PRODUCT ID 23994334 written by LAMNGEUN. VIRASAK and published by . This book was released on 2019 with total page pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Advanced Manufacturing written by William B. Bonvillian and published by MIT Press. This book was released on 2018-01-12 with total page 417 pages. Available in PDF, EPUB and Kindle. Book excerpt: How to rethink innovation and revitalize America's declining manufacturing sector by encouraging advanced manufacturing, bringing innovative technologies into the production process. The United States lost almost one-third of its manufacturing jobs between 2000 and 2010. As higher-paying manufacturing jobs are replaced by lower-paying service jobs, income inequality has been approaching third world levels. In particular, between 1990 and 2013, the median income of men without high school diplomas fell by an astonishing 20% between 1990 and 2013, and that of men with high school diplomas or some college fell by a painful 13%. Innovation has been left largely to software and IT startups, and increasingly U.S. firms operate on a system of “innovate here/produce there,” leaving the manufacturing sector behind. In this book, William Bonvillian and Peter Singer explore how to rethink innovation and revitalize America's declining manufacturing sector. They argue that advanced manufacturing, which employs such innovative technologies as 3-D printing, advanced material, photonics, and robotics in the production process, is the key. Bonvillian and Singer discuss transformative new production paradigms that could drive up efficiency and drive down costs, describe the new processes and business models that must accompany them, and explore alternative funding methods for startups that must manufacture. They examine the varied attitudes of mainstream economics toward manufacturing, the post-Great Recession policy focus on advanced manufacturing, and lessons from the new advanced manufacturing institutes. They consider the problem of “startup scaleup,” possible new models for training workers, and the role of manufacturing in addressing “secular stagnation” in innovation, growth, the middle classes, productivity rates, and related investment. As recent political turmoil shows, the stakes could not be higher.
Download or read book Modern Manufacturing Technology Cost Estimation written by Michael Lembersky and published by AuthorHouse. This book was released on 2005 with total page 147 pages. Available in PDF, EPUB and Kindle. Book excerpt: Modern Manufacturing Technology & Cost Estimation offers a systematic coverage of essential advanced manufacturing processes. Throughout the book authors stress practical approach to near-net-shape and non-traditional (EDM, ECM) processes. Technological developments have recently advanced along with materials, tooling and machines. This book serves as the concise resource related to: Electrophysical and electrochemical methods and principles Near-net-shape processes and applications Technological Knowledge systems developments material - process: cost relationships¿ technology-oriented published, Internet and periodical information This book enables a practitioner: efficiently perform feasibility study develop a basis for cost-oriented decision support acquire new knowledge or to refresh knowledge related to manufacturing analysis and characteristics. This on-the-job book will support cost justification studies, reduce decision time which is critical for busy professionals. Furthermore, it offers common engineering vision for the cross-functional team of manufacturing engineer, product designer, purchasing specialist, sales and marketing professionals. It is written for a practitioner who does not have time to undertake the long hours needed to research the subject The cost reduction course presented in this book can become a model for a set of training courses. Additionally, the book contains useful visual models and templates, examples and diagrams. If technologies described in this book can replace several traditional operations, consolidate product features and improve quality, that means, based on Modern Manufacturing Technology & Cost Estimation a practitioner will be able: generate more creative and cost saving ideas, concepts correctly diagnose a manufacturing problem optimize material and process selection improve mold and die manufacturing processes
Download or read book Additive Manufacturing Technologies written by Ian Gibson and published by Springer. This book was released on 2014-11-26 with total page 509 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book covers in detail the various aspects of joining materials to form parts. A conceptual overview of rapid prototyping and layered manufacturing is given, beginning with the fundamentals so that readers can get up to speed quickly. Unusual and emerging applications such as micro-scale manufacturing, medical applications, aerospace, and rapid manufacturing are also discussed. This book provides a comprehensive overview of rapid prototyping technologies as well as support technologies such as software systems, vacuum casting, investment casting, plating, infiltration and other systems. This book also: Reflects recent developments and trends and adheres to the ASTM, SI, and other standards Includes chapters on automotive technology, aerospace technology and low-cost AM technologies Provides a broad range of technical questions to ensure comprehensive understanding of the concepts covered
Download or read book Machine Tool Technology and Manufacturing Processes written by C. Thomas Olivo and published by Cengage Learning. This book was released on 1987 with total page 236 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Process Technology written by André B. de Haan and published by Walter de Gruyter GmbH & Co KG. This book was released on 2015-04-24 with total page 543 pages. Available in PDF, EPUB and Kindle. Book excerpt: Process Technology provides a general overview about chemical and biochemical process technology. It focuses on the structure and development of production processes, main technological operations and the important aspects of process economics. The theoretical foundations in each chapter are supplemented by case studies and examples in a clear and instructive manner to illustrate the practical aspects. The author highlights operating principles, reasons for application and available industrial equipment of technological operations. Aim is to facilitate those without a process technology background in multi-disciplinary cooperation with (bio-) chemical engineers by providing an overview of this exciting field. The textbook is organized into seven distinct parts: Structure of the chemical industry and (bio-) chemical processes (Bio-) Chemical reaction engineering Molecular separations (distillation, extraction, absorption, adsorption) Mechanical separations (filtration, sedimentation, membranes) Particle and final product manufacturing Development, scale-up, design and safety of processes Major industrial process descriptions
Download or read book Information Technology for Manufacturing written by Kevin Ake and published by CRC Press. This book was released on 2003-11-24 with total page 328 pages. Available in PDF, EPUB and Kindle. Book excerpt: The rate of change in manufacturing today is faster than ever. Retailers and consumers demand flexibility and responsiveness, regulatory oversight is on the rise, and increasing consolidations require companies to demonstrate cost and efficiency improvements. Information Technology for Manufacturing describes how IT can help manufacturers e
Download or read book Manufacturing Processes written by H. N. Gupta and published by New Age International. This book was released on 2012-09 with total page 13 pages. Available in PDF, EPUB and Kindle. Book excerpt: Effective from 2008-09 session, U.P.T.U. has introduced the subject of manufacturing processes for first year engineering students of all streams. This textbook covers the entire course material in a distilled form.
