Download or read book Manufacturing Knowledge written by Richard Gillespie and published by Cambridge University Press. This book was released on 1993-05-28 with total page 304 pages. Available in PDF, EPUB and Kindle. Book excerpt: What motivates workers to work harder? What can management do to create a contented and productive workforce? Discussion of these questions would be incomplete without reference to the Hawthorne experiments, one of the most famous pieces of research ever conducted in the social and behavioral sciences. Drawing on the original records of the experiments and the personal papers of the researchers, Richard Gillespie has reconstructed the intellectual and political dynamics of the experiments as they evolved from the tentative experimentation to seemingly authoritative publications. Manufacturing Knowledge raises fundamental questions about the nature of scientific knowledge, and about the assumptions and evidence that underlay debates on worker productivity.
Download or read book Manufacturing Knowledge written by Richard Gillespie and published by . This book was released on 1985 with total page 1192 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Best practices capturing design and manufacturing knowledge early improves acquisition outcomes written by and published by DIANE Publishing. This book was released on 2002 with total page 77 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Managing Manufacturing Knowledge in Europe in the Era of Industry 4 0 written by Justyna Patalas-Maliszewska and published by Routledge. This book was released on 2022-07-07 with total page 184 pages. Available in PDF, EPUB and Kindle. Book excerpt: Manufacturing companies need to adapt to the requirements of functioning in the era of Industry 4.0 and major technological disruptions. The use of knowledge-based decision support tools has also become necessary in order for enterprises to survive in a competitive environment. This book offers a new approach to designing the knowledge management process and integrating it with the implementation of Industry 4.0 technology. The book presents the methods used in a customer-oriented organization under the Management of Manufacturing Knowledge (M-Know Process). More specifically, methods for defining and collecting customer requirements are presented and methods on how to receive manufacturing knowledge, as well as how to formalise the acquired knowledge using key technologies of Industry 4.0, are discussed. The author also presents real case studies from western and central Europe and offers recommendations for the production manager. The instrumentation of methods and tools to support knowledge management, in the production of individualised products presented therein, will allow the manufacturing company to be transformed digitally, into a customer-oriented organisation operating in accordance with the assumptions of Industry 4.0. This book will be a valuable read for production researchers, academicians, PhD students and postgraduate level students of industrial engineering and industrial management. The practical case studies will also make the book a useful resource for managers of manufacturing enterprises.
Download or read book Advances in Production Management Systems Innovative and Knowledge Based Production Management in a Global Local World written by Bernard Grabot and published by Springer. This book was released on 2014-08-26 with total page 628 pages. Available in PDF, EPUB and Kindle. Book excerpt: The three volumes IFIP AICT 438, 439, and 440 constitute the refereed proceedings of the International IFIP WG 5.7 Conference on Advances in Production Management Systems, APMS 2014, held in Ajaccio, France, in September 2014. The 233 revised full papers were carefully reviewed and selected from 271 submissions. They are organized in 6 parts: knowledge discovery and sharing; knowledge-based planning and scheduling; knowledge-based sustainability; knowledge-based services; knowledge-based performance improvement, and case studies.
Download or read book Knowledge and Technology Integration in Production and Services written by Vladimír Marík and published by Springer. This book was released on 2013-06-05 with total page 545 pages. Available in PDF, EPUB and Kindle. Book excerpt: Knowledge and Technology Integration in Production and Services presents novel application scenarios for balanced distributed and integrated systems based on knowledge and up-to-date technology and provides a great opportunity for discussion of concepts, models, methodologies, technological developments, case studies, new research ideas, and other results among specialists. It comprises the proceedings of the Fifth International Conference on Information Technology for BALANCED AUTOMATION SYSTEMS in Manufacturing and Services (BASYS'02), which was sponsored by the International Federation for Information Processing (IFIP) and held in September 2002 in Cancun, Mexico.
Download or read book The New Production of Knowledge written by Michael Gibbons and published by SAGE. This book was released on 1994-09-09 with total page 196 pages. Available in PDF, EPUB and Kindle. Book excerpt: In this provocative and broad-ranging work, the authors argue that the ways in which knowledge - scientific, social and cultural - is produced are undergoing fundamental changes at the end of the twentieth century. They claim that these changes mark a distinct shift into a new mode of knowledge production which is replacing or reforming established institutions, disciplines, practices and policies. Identifying features of the new mode of knowledge production - reflexivity, transdisciplinarity, heterogeneity - the authors show how these features connect with the changing role of knowledge in social relations. While the knowledge produced by research and development in science and technology is accorded central concern, the
Download or read book Knowledge Discovery Knowledge Engineering and Knowledge Management written by Ana Fred and published by Springer. This book was released on 2019-03-14 with total page 417 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book constitutes the thoroughly refereed proceedings of the 9th International Joint Conference on Knowledge Discovery, Knowledge Engineering and Knowledge Management, IC3K 2017, held in Funchal, Madeira, Portugal, in November 2017. The 19 full papers presented were carefully reviewed and selected from 157 submissions. The papers are organized in topical sections on knowledge discovery and information retrieval; knowledge engineering and ontology development; and knowledge management and information sharing.
Download or read book Knowledge Management Systems for Business written by Robert J. Thierauf and published by Bloomsbury Publishing USA. This book was released on 1999-07-30 with total page 376 pages. Available in PDF, EPUB and Kindle. Book excerpt: Until now, business systems have focused on selected data within a certain context to produce information. A better approach, says Thierauf, is to take information accompanied by experience over time to generate knowledge. He demonstrates that knowledge management systems can be used as a source of power to outmaneuver business competitors. Knowledge discovery tools enable decision makers to extract the patterns, trends, and correlations that underlie the inner (and inter-) workings of a company. His book is the first comprehensive text to define this important new direction in computer technology and will be essential reading for MIS practitioners, systems analysts, and academics researching and teaching the theory and applications of knowledge management systems. Thierauf centers on leveraging a company's knowledge capital. Indeed, knowledge is power—the power to improve customer satisfaction, marketing and production methods, financial operations, and other functions. Thierauf shows how knowledge, when developed and renewed, can be applied to a company's functional areas and provide an important competitive advantage. By utilizing some form of internal and external computer networks and providing some type of knowledge discovery software that encapsulates usable knowledge, Thierauf shows how to create an infrastructure to capture knowledge, store it, improve it, clarify it, and disseminate it throughout the organization, then how to use it regularly. His book demonstrates clearly how knowledge management systems focus on making knowledge available to company employees in the right format, at the right time, and in the right place. The result is inevitably a higher order of intelligence in decision making, more so now than could ever have been possible in even the most recent past.
Download or read book Practical E Manufacturing and Supply Chain Management written by Gerhard Greeff and published by Elsevier. This book was released on 2004-08-11 with total page 476 pages. Available in PDF, EPUB and Kindle. Book excerpt: New technologies are revolutionising the way manufacturing and supply chain management are implemented. These changes are delivering manufacturing firms the competitive advantage of a highly flexible and responsive supply chain and manufacturing system to ensure that they meet the high expectations of their customers, who, in today's economy, demand absolutely the best service, price, delivery time and product quality.To make e-manufacturing and supply chain technologies effective, integration is needed between various, often disparate systems. To understand why this is such an issue, one needs to understand what the different systems or system components do, their objectives, their specific focus areas and how they interact with other systems. It is also required to understand how these systems evolved to their current state, as the concepts used during the early development of systems and technology tend to remain in place throughout the life-cycle of the systems/technology. This book explores various standards, concepts and techniques used over the years to model systems and hierarchies in order to understand where they fit into the organization and supply chain. It looks at the specific system components and the ways in which they can be designed and graphically depicted for easy understanding by both information technology (IT) and non-IT personnel.Without a good implementation philosophy, very few systems add any real benefit to an organization, and for this reason the ways in which systems are implemented and installation projects managed are also explored and recommendations are made as to possible methods that have proven successful in the past. The human factor and how that impacts on system success are also addressed, as is the motivation for system investment and subsequent benefit measurement processes.Finally, the vendor/user supply/demand within the e-manufacturing domain is explored and a method is put forward that enables the reduction of vendor bias during the vendor selection process.The objective of this book is to provide the reader with a good understanding regarding the four critical factors (business/physical processes, systems supporting the processes, company personnel and company/personal performance measures) that influence the success of any e-manufacturing implementation, and the synchronization required between these factors.· Discover how to implement the flexible and responsive supply chain and manufacturing execution systems required for competitive and customer-focused manufacturing· Build a working knowledge of the latest plant automation, manufacturing execution systems (MES) and supply chain management (SCM) design techniques· Gain a fuller understanding of the four critical factors (business and physical processes, systems supporting the processes, company personnel, performance measurement) that influence the success of any e-manufacturing implementation, and how to evaluate and optimize all four factors
Download or read book Knowledge Based and Intelligent Information and Engineering Systems Part II written by Andreas Koenig and published by Springer. This book was released on 2011-09-15 with total page 726 pages. Available in PDF, EPUB and Kindle. Book excerpt: The four-volume set LNAI 6881-LNAI 6884 constitutes the refereed proceedings of the 15th International Conference on Knowledge-Based Intelligent Information and Engineering Systems, KES 2011, held in Kaiserslautern, Germany, in September 2011. Part 2: The total of 244 high-quality papers presented were carefully reviewed and selected from numerous submissions. The 70 papers of Part 2 are organized in topical sections on web intelligence, text and multimedia mining and retrieval, intelligent tutoring systems and e-learning environments, other / misc. intelligent systems topics, methods and techniques of artificial and computational intelligence in economics, finance and decision making, workshop on seamless integration of semantic technologies in computer-supported office work (sistcow), innovations in chance discovery, advanced knowledge-based systems, recent trends in knowledge engineering, smart systems, and their applications.
Download or read book Concurrent Enterprising written by Marc Pallot and published by Springer Science & Business Media. This book was released on 2012-12-06 with total page 207 pages. Available in PDF, EPUB and Kindle. Book excerpt: Concurrent Enterprising: Toward the Concurrent Enterprise in the Era of the Internet and Electronic Commerce presents the concurrent enterprise business model and concurrent enterprising approach, which is emerging as a crucial challenge for organizations in all geographical locations and economic sectors. To achieve this goal, this book deals with the main aspects of the merging context in which enterprises are doing business. This context is characterized by the fastest-spread information and communication technologies (ICT) that constitute the new infrastructure of the global marketplace. This book discusses a set of the most advanced enterprise paradigms created during the 1980s and 1990s, most of them supported by advanced research programs, especially in the worldwide manufacturing industry. The book discusses differences between these enterprise paradigms and presents Internet-related technologies as a main driver toward a new business model. It then examines less theoretical questions - among them, how to implement this new business model and how companies can move to the concurrent enterprise paradigm in creating a concurrent business environment. And it introduces a methodology for enterprises willing to maintain or even improve their competitiveness in the global marketplace. The book has eight chapters. The first two concentrate on the advanced enterprise paradigms, and their advantages and limits for maintaining or improving competitiveness in the global marketplace. Chapter 3 studies, separately, the virtual enterprise and related approaches. Chapter 4 studies another fundamental ingredient of the new business model - concurrent engineering (CE). Chapter 5 summarizes these preceding approaches and establishes a foundation for building a concurrent enterprise. Chapter 6 presents specific business cases illustrating the advantages and limits of virtual enterprise applications and introduces electronic commerce and electronic documents. Chapter 7 presents concurrent enterprise as a new business model, and Chapter 8 synthesizes the concurrent enterprising process. Concurrent Enterprising: Toward the Concurrent Enterprise in the Era of the Internet and Electronic Commerce is a reference and a user's guide designed for business managers, IT managers, engineers, researchers, scientists, and other individuals interested in learning how to use a sustainable business model driven by the Internet and electronic commerce.
Download or read book Knowledge and Information Technology Management Human and Social Perspectives written by Gunasekaran, Angappa and published by IGI Global. This book was released on 2002-07-01 with total page 380 pages. Available in PDF, EPUB and Kindle. Book excerpt: Success in an increasingly competitive market depends on the quality of knowledge which organisations apply to their major business processes. For example, a supply chain depends on knowledge of diverse areas, including raw materials, planning, manufacturing, and distribution. Likewise, product development requires knowledge of consumer requirements, new science, new technology, and marketing. Knowledge is broadly defined as credible information that is of potential value to an organisation. Knowledge management (KM) is a function of generation and dissemination of information, developing a shared understanding of information, filtering shared understandings into degrees of potential value, and storing valuable knowledge within the confines of an accessible organisational mechanism.
Download or read book 2014 International Conference on Mechanical Design Manufacture and Automation Engineering MDMAE2014 written by D. P. Yasin and published by DEStech Publications, Inc. This book was released on 2014-02-04 with total page 520 pages. Available in PDF, EPUB and Kindle. Book excerpt: Automation Engineering (MDMAE2014) is to provide a platform for all researchers in the field of Mechanical, Manufacture, Automation and Material Engineering to share the most advanced knowledge from both academic and industrial world, and to communicate with each other about their experiences and the most up-to-date research achievements, discussing forward issues and future prospects, seeking a better way to solve practical problems in this fields. As the first international conference on MDMAE, consisting of five main topics: Mechanical Engineering, Automation Engineering, Manufacturing Systems, Materials Engineering and Measurement and Test, which offer attendees free space to present their inspiring works and academic achievements mixed with the atmosphere of industry and academia, it has attracted many scholars, researchers and practitioners in these fields from various countries to get together in this conference, sharing their latest research achievements with each other , enriching their professional knowledge and broadening their horizons as well.
Download or read book The Pan Industrial Revolution written by Richard D'Aveni and published by Houghton Mifflin Harcourt. This book was released on 2018-10-16 with total page 325 pages. Available in PDF, EPUB and Kindle. Book excerpt: The acclaimed author of Strategic Capitalism presents a provocative new vision of global industry in the age of 3-D printing: “essential business reading” (Kirkus, starred review). With books like Hypercompetition and Strategic Capitalism, Richard D’Aveni has established himself as a business strategist of uncanny prescience. In The Pan-Industrial Revolution, he demonstrates how the advent of industrial‑scale 3‑D printing is already happening under the radar, and that it will have a far‑reaching impact that most corporate and governmental leaders have yet to anticipate or understand. 3-D printing, now called additive manufacturing, has moved far beyond a desktop technology used by hobbyists to churn out trinkets and toys. In this eye-opening account, D’Aveni reveals how recent breakthroughs have been secretly adapted by Fortune 500 companies to revolutionize the manufacture jet engines, airplanes, automobiles, and so much more. D’Aveni explains how this technology will transform the landscape of manufacturing, and the dramatic effect this change will have on the world economy. A handful of massively powerful corporations—what D’Aveni calls pan‑industrials—will become as important as any tech giant in re-structuring the global order.
Download or read book Knowledge Creation and Management written by Kazuo Ichijo and published by Oxford University Press. This book was released on 2006-12-07 with total page 336 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book presents the latest management ideas in knowledge creation and management in readable and non-technical chapters. Leading experts have contributed chapters in their fields of expertise. Each distils his or her subject in a chapter that is accessible to managers who want to learn what can be applied to their organizations without the distracting details of research methodology. Each chapter, however, is based on careful research. The book is organized so that readers can easily find chapters of most interest and value to them. The emphasis is on the practical applications of knowledge to a wide variety of organizations and functional areas.
Download or read book Enterprise Interoperability III written by Kai Mertins and published by Springer Science & Business Media. This book was released on 2008-04-01 with total page 674 pages. Available in PDF, EPUB and Kindle. Book excerpt: Interoperability: the ability of a system or a product to work with other systems or products without special effort from the user is a key issue in manufacturing and industrial enterprise generally. It is fundamental to the production of goods and services quickly and at low cost at the same time as maintaining levels of quality and customisation. Composed of over 50 papers, Enterprise Interoperability III ranges from academic research through case studies to industrial and administrative experience of interoperability. The international nature of the authorship continues to broaden. Many of the papers have examples and illustrations calculated to deepen understanding and generate new ideas. A concise reference to the state of the art in software interoperability, Enterprise Interoperability III will be of great value to engineers and computer scientists working in manufacturing and other process industries and to software engineers and electronic and manufacturing engineers working in the academic environment.
