Download or read book Advanced Manufacturing written by William B. Bonvillian and published by MIT Press. This book was released on 2018-01-12 with total page 417 pages. Available in PDF, EPUB and Kindle. Book excerpt: How to rethink innovation and revitalize America's declining manufacturing sector by encouraging advanced manufacturing, bringing innovative technologies into the production process. The United States lost almost one-third of its manufacturing jobs between 2000 and 2010. As higher-paying manufacturing jobs are replaced by lower-paying service jobs, income inequality has been approaching third world levels. In particular, between 1990 and 2013, the median income of men without high school diplomas fell by an astonishing 20% between 1990 and 2013, and that of men with high school diplomas or some college fell by a painful 13%. Innovation has been left largely to software and IT startups, and increasingly U.S. firms operate on a system of “innovate here/produce there,” leaving the manufacturing sector behind. In this book, William Bonvillian and Peter Singer explore how to rethink innovation and revitalize America's declining manufacturing sector. They argue that advanced manufacturing, which employs such innovative technologies as 3-D printing, advanced material, photonics, and robotics in the production process, is the key. Bonvillian and Singer discuss transformative new production paradigms that could drive up efficiency and drive down costs, describe the new processes and business models that must accompany them, and explore alternative funding methods for startups that must manufacture. They examine the varied attitudes of mainstream economics toward manufacturing, the post-Great Recession policy focus on advanced manufacturing, and lessons from the new advanced manufacturing institutes. They consider the problem of “startup scaleup,” possible new models for training workers, and the role of manufacturing in addressing “secular stagnation” in innovation, growth, the middle classes, productivity rates, and related investment. As recent political turmoil shows, the stakes could not be higher.
Download or read book Remaking Europe written by Reinhilde Veugelers and published by . This book was released on 2017-09-30 with total page 252 pages. Available in PDF, EPUB and Kindle. Book excerpt: How well are European firms responding to the new opportunities for growth, and in which global value chains are they developing these new activities? The policy discussion on the future of manufacturing requires an understanding of the changing role of manufacturing in Europe's growth agenda.
Download or read book Trouble in the Making written by Mary Hallward-Driemeier and published by World Bank Publications. This book was released on 2017-10-12 with total page 288 pages. Available in PDF, EPUB and Kindle. Book excerpt: Technology and globalization are threatening manufacturing’s traditional ability to deliver both productivity and jobs at a large scale for unskilled workers. Concerns about widening inequality within and across countries are raising questions about whether interventions are needed and how effective they could be. Trouble in the Making? The Future of Manufacturing-Led Development addresses three questions: - How has the global manufacturing landscape changed and why does this matter for development opportunities? - How are emerging trends in technology and globalization likely to shape the feasibility and desirability of manufacturing-led development in the future? - If low wages are going to be less important in defining competitiveness, how can less industrialized countries make the most of new opportunities that shifting technologies and globalization patterns may bring? The book examines the impacts of new technologies (i.e., the Internet of Things, 3-D printing, and advanced robotics), rising international competition, and increased servicification on manufacturing productivity and employment. The aim is to inform policy choices for countries currently producing and for those seeking to enter new manufacturing markets. Increased polarization is a risk, but the book analyzes ways to go beyond focusing on potential disruptions to position workers, firms, and locations for new opportunities. www.worldbank.org/futureofmanufacturing
Download or read book Productivity Growth in the Manufacturing Sector written by Mihir Kumar Pal and published by Emerald Group Publishing. This book was released on 2021-06-03 with total page 312 pages. Available in PDF, EPUB and Kindle. Book excerpt: The growth of manufacturing industries is one of the key sectors in helping to mitigate global recessions. Productivity Growth in the Manufacturing Sector thoroughly discusses issues and potential remedies of this sector for a range of international countries.
Download or read book Growth in a Time of Change written by Hyeon-Wook Kim and published by Brookings Institution Press. This book was released on 2020-02-25 with total page 376 pages. Available in PDF, EPUB and Kindle. Book excerpt: Growth in a Time of Change: Global and Country Perspectives on a New Agenda is the first of a two-book research project that addresses new issues and challenges for economic growth arising from ongoing significant change in the world economy, focusing especially on technological transformation. The project is a collaboration between the Brookings Institution and the Korea Development Institute. Part I of the book looks at key elements of change from a global perspective. It analyzes how technological change, shifts in investment, and demographic transition are affecting potential economic growth globally and across major groups of economies. The contributors explore possible scenarios for the global economy as the digital revolution drives rapid technological change, including impacts on growth, jobs, income distribution, trade balances, and capital flows. Technology is changing the global configuration of comparative advantage and globalization increasingly has a digital dimension. The implications of these developments for the future of sectors such as manufacturing and for international trade are assessed. Part II of the book addresses new issues in the growth agenda from the perspective of an individual major economy: South Korea. The chapters in this section analyze how macroeconomic developments and technological change are influencing the behavior of households and firms in terms of their decisions to consume, save, and invest. Rising income and wealth inequalities are a major concern globally. Against this backdrop, trends in the labor income share and wage inequalities in South Korea are analyzed in terms of the role played by technology, industrial concentration, shifts in labor demand and supply, and other factors. Throughout the book, the contributors, in their analysis of both global and Korea-specific trends and prospects, place emphasis on drawing implications for policy.
Download or read book Made in Japan written by Nihon Indasutoriaru Pafōmansu Iinkai and published by MIT Press. This book was released on 1997 with total page 452 pages. Available in PDF, EPUB and Kindle. Book excerpt: For three years, seventeen university researchers worked with representatives of thirty-four corporations to analyze the present state of Japanese manufacturing and to identify the challenges Japan will face in the twenty-first century. The result of their study is Made in Japan. Winner of the Shingo Research and Professional Publication Prize for 1999In 1989 the MIT Press published Made in America, a landmark study by The MIT Commission on Industrial Productivity, an interdisciplinary group of MIT faculty members. The study analyzed the strengths and weaknesses of American industry and set forth a strategic plan for revitalizing American productivity. Inspired by the MIT study, the Japan Techno-Economics Society formed the Japan Commission on Industrial Performance (JCIP). For three years, seventeen university researchers worked with representatives of thirty-four corporations to analyze the present state of Japanese manufacturing and to identify the challenges Japan will face in the twenty-first century. The result of their study is Made in Japan. Made in Japan has a broader perspective than its American model, whose focus was limited to issues of productivity. The book is divided into three parts. Part I is a general overview. Part II is an in-depth analysis of seven industries: industrial electronics, consumer electronics, automobiles, metal products, industrial machinery, chemicals, and textiles. Part III identifies common problems and makes recommendations for industrial policy. The topics covered in the study are grounded in such fundamental issues as global environmental problems, competitiveness, and the free market economy system.
Download or read book How Nations Succeed Manufacturing Trade Industrial Policy and Economic Development written by Murat A. Yülek and published by Springer. This book was released on 2018-08-02 with total page 304 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book assesses developmental experience in different countries as well as British expansion following the industrial revolution from a developmental perspective. It explains why some nations are rich and others are poor, and discusses how manufacturing made economies flourish and spur economic development. It explains how today’s governments can design and implement industrial policy, and how they can determine economically strategic sectors to break out of Low and Middle Income Traps. Closely linked to global trade and (im)balances, industrialization was never an accident. Industrialization explains how some countries experience export-led growth and others import-led slowdowns. Many confuse industrialization with the construction of factory buildings rather than a capacity and skill building process through certain stages. Industrial policy helps countries advance through those stages. Explaining technical concepts in understandable terms, the book discusses the capacity and limits of the developmental state in industrialization and in general in economic development, demonstrating how picking-the-winner type focused industrial policy has worked in different countries. It also discusses how industrial policy and science, technology and innovation policies should be sequenced for best results.
Download or read book At Your Service written by Gaurav Nayyar and published by World Bank Publications. This book was released on 2021-10-18 with total page 364 pages. Available in PDF, EPUB and Kindle. Book excerpt: Manufacturing-led development has provided the traditional model for creating jobs and prosperity. But in the past three decades the conventional pattern of structural transformation has changed, with the services sector growing faster than the manufacturing sector. This raises critical questions about the ability of developing economies to close productivity gaps with advanced economies and to create good jobs for more people. At Your Service? The Promise of Services-Led Development (www.worldbank.org/services-led-development) assesses the scope of a services-driven development model and policy directions that can maximize the model’s potential.
Download or read book Transforming Industrial Policy for the Digital Age written by Patrizio Bianchi and published by Edward Elgar Publishing. This book was released on 2019 with total page 249 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book argues that digital globalization is inducing deep and productive transformations, making industrial policy necessary in order to reorientate development towards inclusive and more sustainable growth. The book also demonstrates that industrialization remains an important development process for emerging countries. Regarding the future of jobs, the authors show how the substitution of labour in automation is not inevitable since technology is also complementary to human capital. Policymakers should pay more attention to the new skills that will be required. A particular concern is is the rapid change in technology and business compared to institutions which take time to adapt. Territories have an important role to play in order to speed-up institutional adaptation, providing they can act coherently with the other levels of government.
Download or read book The Role of Innovation and Entrepreneurship in Economic Growth written by Michael J Andrews and published by University of Chicago Press. This book was released on 2022-03-17 with total page 633 pages. Available in PDF, EPUB and Kindle. Book excerpt: "Innovation and entrepreneurship are ubiquitous today, both as fields of study and as starting points for conversations among experts in government and economic development. But while these areas on continue to attract public and private investments, many measurements of their resulting economic growth-including productivity growth and business dynamism-have remained modest. Why this difference? Because not all business sectors are the same, and the transformative gains of some industries have been offset by stagnation or contraction in others. Accordingly, a nuanced understanding of the economy requires a nuanced understanding of where innovation and entrepreneurship occur and where they matter. Answering these questions allows for strategic public investment and the infrastructure for economic growth.The Role of Innovation and Entrepreneurship in Economic Growth, the latest entry in the NBER conference series, seeks to codify these answers. The editors leverage industry studies to identify specific examples of productivity improvements enabled by innovation and entrepreneurship, including those from new production technologies, increased competition, new organizational forms, and other means. Taken together, the volume illuminates whether the contribution of innovation and entrepreneurship to economic growth is likely to be concentrated, be it selected sectors or more broadly"--
Download or read book In Praise of Hard Industries written by Eamonn Fingleton and published by Houghton Mifflin Harcourt. This book was released on 1999 with total page 296 pages. Available in PDF, EPUB and Kindle. Book excerpt: "In Praise of Hard Industries offers an authoritative and deeply disturbing counterargument to the many unexamined assumptions and glibly misstated facts that are driving our embrace of postindustrialism."--BOOK JACKET.
Download or read book Fit for Growth written by Vinay Couto and published by John Wiley & Sons. This book was released on 2017-01-10 with total page 296 pages. Available in PDF, EPUB and Kindle. Book excerpt: A practical approach to business transformation Fit for Growth* is a unique approach to business transformation that explicitly connects growth strategy with cost management and organization restructuring. Drawing on 70-plus years of strategy consulting experience and in-depth research, the experts at PwC’s Strategy& lay out a winning framework that helps CEOs and senior executives transform their organizations for sustainable, profitable growth. This approach gives structure to strategy while promoting lasting change. Examples from Strategy&’s hundreds of clients illustrate successful transformation on the ground, and illuminate how senior and middle managers are able to take ownership and even thrive during difficult periods of transition. Throughout the Fit for Growth process, the focus is on maintaining consistent high-value performance while enabling fundamental change. Strategy& has helped major clients around the globe achieve significant and sustained results with its research-backed approach to restructuring and cost reduction. This book provides practical guidance for leveraging that expertise to make the choices that allow companies to: Achieve growth while reducing costs Manage transformation and transition productively Create lasting competitive advantage Deliver reliable, high-value performance Sustainable success is founded on efficiency and high performance. Companies are always looking to do more with less, but their efforts often work against them in the long run. Total business transformation requires total buy-in, and it entails a series of decisions that must not be made lightly. The Fit for Growth approach provides a clear strategy and practical framework for growth-oriented change, with expert guidance on getting it right. *Fit for Growth is a registered service mark of PwC Strategy& Inc. in the United States
Download or read book Manufacturing Matters written by Stephen S. Cohen and published by New York : Basic Books. This book was released on 1987-06-03 with total page 328 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Resource Revolution written by Stefan Heck and published by Houghton Mifflin Harcourt. This book was released on 2014 with total page 273 pages. Available in PDF, EPUB and Kindle. Book excerpt: How to turn the problem of scarce resources into an opportunity to vastly improve your company's performance, by two top McKinsey consultants.
Download or read book Manufacturing Success in Georgia written by Jason Moss and published by . This book was released on 2021-05-25 with total page 138 pages. Available in PDF, EPUB and Kindle. Book excerpt: Manufacturing Success in Georgia uses history, pictures, and process explanations to share the story of manufacturing in the largest state east of the Mississippi River. Beginning with early European settlers, traders, and inventors, the book moves readers through development and into 2021's newest technologies, at least those that can be revealed. The amazing journey covers the entire state, highlighting the impact manufacturing has had on both urban and rural areas. You will learn about the invention of the cotton gin by Eli Whitney to the latest most advanced business-class jet in the world produced by Gulfstream. Chapters include information about moving from crafting to mass production, shoe manufacturing during World War II, cotton, textiles, carpet, railroads, firearms, The New South, the food industry, transportation from Ford to Kia, timber harvesting and processing to papermaking, and early aviation to a planned Georgia spaceport. Manufacturing Success in Georgia the dream project of Jason Moss, CEO of the Georgia Manufacturing Alliance and combines his dream with the skills of his co-author writing professor and historian Dianne Dent-Wilcox. Together they engaged a team of professionals to bring a dream and the written word into a book you will love to read and from which you will learn more than you imagined.
Download or read book Routledge Handbook of Industry and Development written by John Weiss and published by Routledge. This book was released on 2015-09-16 with total page 620 pages. Available in PDF, EPUB and Kindle. Book excerpt: The Routledge Handbook of Industry and Development is a global overview of industrialisation. Each chapter will provide readers with contemporary insights into this this essential aspect of economic development. Industrialisation has been at the forefront of discussion on economic development since the earliest days of development economics. But over the last fifty years, the manufacturing sectors of different countries and regions have grown at strikingly different rates. In 1960 developing countries took a very small share of global manufacturing production. Today the position had changed radically with fast growth of manufacturing in many parts of what was originally the developing world, particularly in China and the rest of East Asia. On the other hand, countries in Africa and parts of Latin America have been largely left behind by this process of industrialisation. This volume aims to illuminate this uneven development and takes stock of the current issues that hinder and support industrialisation in low and middle income economies. This Handbook is a collection of chapters on different aspects of industrialisation experience in a range of countries. Key themes include, the role of manufacturing in growth, the nature of structural change at different stages of development, the role of manufacturing in employment creation, alternative options for trade and industrial policy, the key role of technology and technical change, and the impact of globalisation and the spread of global value chains and foreign direct investment on prospects for industrialisation. Several chapters discuss individual country experiences with examples from India, Mexico, South Africa and Tanzania, as well as an overview of African industrialisation. This authoritative Handbook will be a key reference source for those studying or wishing to understand contemporary economic development. Offering inspiration and direction for future research, this landmark volume will be of crucial importance to all development economics scholars and researchers.
Download or read book Manufacturing a Better Future for America written by Richard McCormack and published by . This book was released on 2009 with total page 332 pages. Available in PDF, EPUB and Kindle. Book excerpt:
