Download or read book Manufacturing Engineering and Process V written by Osman Adiguzel and published by Trans Tech Publications Ltd. This book was released on 2017-03-01 with total page 144 pages. Available in PDF, EPUB and Kindle. Book excerpt: Selected, peer reviewed papers from the 5th International Conference on Manufacturing Engineering and Process 2016, May 25-27, 2016, Istanbul, Turkey
Download or read book Manufacturing Engineering Processes Second Edition written by Leo Alting and published by CRC Press. This book was released on 2020-08-19 with total page 518 pages. Available in PDF, EPUB and Kindle. Book excerpt: Responding to the need for an integrated approach in manufacturing engineering oriented toward practical problem solving, this updated second edition describes a process morphology based on fundamental elements that can be applied to all manufacturing methods - providing a framework for classifying processes into major families with a common theoretical foundation. This work presents time-saving summaries of the various processing methods in data sheet form - permitting quick surveys for the production of specific components.;Delineating the actual level of computer applications in manufacturing, this work: creates the basis for synthesizing process development, tool and die design, and the design of production machinery; details the product life-cycle approach in manufacturing, emphasizing environmental, occupational health and resource impact consequences; introduces process planning and scheduling as an important part of industrial manufacturing; contains a completely revised and expanded section on ceramics and composites; furnishes new information on welding arc formation and maintenance; addresses the issue of industrial safety; and discusses progress in non-conventional processes such as laser processing, layer manufacturing, electrical discharge, electron beam, abrasive jet, ultrasonic and eltrochemical machining.;Revealing how manufacturing methods are adapted in industry practices, this work is intended for use by students of manufacturing engineering, industrial engineering and engineering design; and also for use as a self-study guide by manufacturing, mechanical, materials, industrial and design engineers.
Download or read book Manufacturing Engineering and Process II written by Bale V. Reddy and published by Trans Tech Publications Ltd. This book was released on 2013-06-13 with total page 1880 pages. Available in PDF, EPUB and Kindle. Book excerpt: Collection of selected, peer reviewed papers from the ICMEP 2013 International Conference on Manufacturing Engineering and Process, April 13-14, 2013, Vancouver, Canada. The 373 papers are grouped as follows: Chapter 1: Advanced Materials Engineering and Technology; Chapter 2: General Mechanical Engineering; Chapter 3: Design Technology and Engineering; Chapter 4: Applied Thermodynamics, Heat Transfer, Energy Conversion; Chapter 5: Electrical Engineering and Electric Machines; Chapter 6: Power System and Energy Engineering: Its Applications; Chapter 7: Instrumentation, Measurement Technologies, Analysis and Methodology; Chapter 8: Electronics and Integrated Circuits, Embedded Technology and Applications; Chapter 9: Mechatronics and Robotics; Chapter 10: Modern Control, Automation and Reverse Engineering; Chapter 11: New Technology, Method and Technique in Civil Engineering; Chapter 12: Manufacturing and Industrial Engineering, Management Applications; Chapter 13: Mathematics - in Particular, Calculus, Differential Equations, Statistics, and Linear Algebra; Chapter 14: Signal Processing and Data Mining; Chapter 15: Information Technologies and Networks: Its Applications.
Download or read book Fundamental Principles of Manufacturing Processes written by Robert H. Todd and published by Industrial Press Inc.. This book was released on 1994 with total page 180 pages. Available in PDF, EPUB and Kindle. Book excerpt: Provides a taxonomy of manufacturing processes and discusses general characteristics of the 10 fundamental families, such as mass-reducing, joining, hardening, and surface treatment. The individual processes themselves are described in the companion Reference Guide. Well illustrated. No bibliography. Annotation copyright by Book News, Inc., Portland, OR
Download or read book Manufacturing Engineering Processes Second Edition written by Alting and published by CRC Press. This book was released on 1993-11-23 with total page 518 pages. Available in PDF, EPUB and Kindle. Book excerpt: Responding to the need for an integrated approach in manufacturing engineering oriented toward practical problem solving, this updated second edition describes a process morphology based on fundamental elements that can be applied to all manufacturing methods - providing a framework for classifying processes into major families with a common theoretical foundation. This work presents time-saving summaries of the various processing methods in data sheet form - permitting quick surveys for the production of specific components.;Delineating the actual level of computer applications in manufacturing, this work: creates the basis for synthesizing process development, tool and die design, and the design of production machinery; details the product life-cycle approach in manufacturing, emphasizing environmental, occupational health and resource impact consequences; introduces process planning and scheduling as an important part of industrial manufacturing; contains a completely revised and expanded section on ceramics and composites; furnishes new information on welding arc formation and maintenance; addresses the issue of industrial safety; and discusses progress in non-conventional processes such as laser processing, layer manufacturing, electrical discharge, electron beam, abrasive jet, ultrasonic and eltrochemical machining.;Revealing how manufacturing methods are adapted in industry practices, this work is intended for use by students of manufacturing engineering, industrial engineering and engineering design; and also for use as a self-study guide by manufacturing, mechanical, materials, industrial and design engineers.
Download or read book Principles of Engineering Manufacture written by V. Chiles and published by Butterworth-Heinemann. This book was released on 1996-02-02 with total page 656 pages. Available in PDF, EPUB and Kindle. Book excerpt: The third edition of this text, formerly known as Principles of Engineering Production, has been thoroughly revised and updated and continues to provide students with a comprehensive overview of the technical considerations for the entire manufacturing process. In keeping with the developments in manufacturing technology, this new edition reflects the major advances in recent years, in particular, looking at the transition to computer controlled machinery and the developments in computer applications.Beginning with specification and standardisation, it analyses the key aspects of the manufacturing process and pays particular attention to the crucial considerations of quality and cost. In addition, the coverage of materials has been extended to account for the increased availability and complexity of non-metals. The addition of a number of case studies, new worked examples and problems, make this text an invaluable introduction to engineering manufacture. It is also a useful and straightforward reference text for the professional engineer.
Download or read book Manufacturing written by Beno Benhabib and published by CRC Press. This book was released on 2003-07-03 with total page 616 pages. Available in PDF, EPUB and Kindle. Book excerpt: From concept development to final production, this comprehensive text thoroughly examines the design, prototyping, and fabrication of engineering products and emphasizes modern developments in system modeling, analysis, and automatic control. This reference details various management strategies, design methodologies, traditional production techniqu
Download or read book Manufacturing Process Planning written by José V. Abellán-Nebot and published by Wiley. This book was released on 2025-03-25 with total page 0 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Manufacturing Processes written by H. N. Gupta and published by New Age International. This book was released on 2012-09 with total page 13 pages. Available in PDF, EPUB and Kindle. Book excerpt: Effective from 2008-09 session, U.P.T.U. has introduced the subject of manufacturing processes for first year engineering students of all streams. This textbook covers the entire course material in a distilled form.
Download or read book Processes of Manufacturing written by R. Thomas Wright and published by Goodheart-Wilcox Publisher. This book was released on 1990 with total page 472 pages. Available in PDF, EPUB and Kindle. Book excerpt: Provides comprehensive instruction in the various methods of processing metals, plastics, ceramics, and composite materials. The book devotes several chapters to each of the major processes used in manufacturing today: casting and molding, forming, separating, conditioning, assembling, and finishing. Additional information is provided on manufacturing, automation, process planning, and total quality management (TQM). The book is extensively illustrated with photos and a large number of line drawings that clearly convey the details of important processes.
Download or read book Manufacturing Processes and Materials Fourth Edition written by George F. Schrader and published by Society of Manufacturing Engineers. This book was released on 2000 with total page 866 pages. Available in PDF, EPUB and Kindle. Book excerpt: This best-selling textbook for major manufacturing engineering programs across the country masterfully covers the basic processes and machinery used in the job shop, tool room, or small manufacturing facility. At the same time, it describes advanced equipment and processes used in larger production environments. Questions and problems at the end of each chapter can be used as self-tests or assignments. An Instructor's Guide is available to tailor a more structured learning experience. Additional resources from SME, including the Fundamental Manufacturing Processes videotape series can also be used to supplement the book's learning objectives. With 31 chapters, 45 tables, 586 illustrations, 141 equations and an extensive index, Manufacturing Processes & Materials is one of the most comprehensive texts available on this subject.
Download or read book Recent Advances in Manufacturing Engineering and Processes written by Ramesh K. Agarwal and published by Springer Nature. This book was released on 2021-10-21 with total page 201 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book comprises select papers from the 10th International Conference on Manufacturing Engineering and Processes 2021. The contents of this volume focus on recent technological advances in the field of manufacturing engineering and processes including computer-aided design and manufacturing, environmentally sustainable manufacturing processes, composite materials manufacturing, and nanomaterials and nanomanufacturing. The contents cover latest advances especially in 3D printing and additive manufacturing techniques and processes for sustainable materials including ceramic and polymer-matrix composite where there is paucity of good papers in the literature. This book proves a valuable resource for those in academia and industry.
Download or read book Introduction to Manufacturing Processes written by Mikell P. Groover and published by Wiley Global Education. This book was released on 2012-04-13 with total page 719 pages. Available in PDF, EPUB and Kindle. Book excerpt: Mikell Groover, author of the leading text in manufacturing processes, has developed Introduction to Manufacturing Processes as a more navigable and student-friendly text paired with a strong suite of additional tools and resources online to help instructors drive positive student outcomes. Focusing mainly on processes, tailoring down the typical coverage of both materials and systems. The emphasis on manufacturing science and mathematical modeling of processes is an important attribute of the new book. Real world/design case studies are also integrated with fundamentals - process videos provide students with a chance to experience being 'on the floor' in a manufacturing facility, followed by case studies that provide individual students or groups of students to dig into larger/more design-oriented problems.
Download or read book Chemical Engineering and Chemical Process Technology Volume V written by Ryzhard Pohorecki and published by EOLSS Publications. This book was released on 2010-11-30 with total page 338 pages. Available in PDF, EPUB and Kindle. Book excerpt: Chemical Engineering and Chemical Process Technology is a theme component of Encyclopedia of Chemical Sciences, Engineering and Technology Resources in the global Encyclopedia of Life Support Systems (EOLSS), which is an integrated compendium of twenty Encyclopedias. Chemical engineering is a branch of engineering, dealing with processes in which materials undergo changes in their physical or chemical state. These changes may concern size, energy content, composition and/or other application properties. Chemical engineering deals with many processes belonging to chemical industry or related industries (petrochemical, metallurgical, food, pharmaceutical, fine chemicals, coatings and colors, renewable raw materials, biotechnological, etc.), and finds application in manufacturing of such products as acids, alkalis, salts, fuels, fertilizers, crop protection agents, ceramics, glass, paper, colors, dyestuffs, plastics, cosmetics, vitamins and many others. It also plays significant role in environmental protection, biotechnology, nanotechnology, energy production and sustainable economical development. The Theme on Chemical Engineering and Chemical Process Technology deals, in five volumes and covers several topics such as: Fundamentals of Chemical Engineering; Unit Operations – Fluids; Unit Operations – Solids; Chemical Reaction Engineering; Process Development, Modeling, Optimization and Control; Process Management; The Future of Chemical Engineering; Chemical Engineering Education; Main Products, which are then expanded into multiple subtopics, each as a chapter. These five volumes are aimed at the following five major target audiences: University and College students Educators, Professional practitioners, Research personnel and Policy analysts, managers, and decision makers and NGOs.
Download or read book Proceedings of 5th International Conference on Advanced Manufacturing Engineering and Technologies written by Vidosav Majstorovic and published by Springer. This book was released on 2017-04-22 with total page 468 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book presents the proceedings from the 5th NEWTECH conference (Belgrade, Serbia, 5–9 June 2017), the latest in a series of high-level conferences that bring together experts from academia and industry in order to exchange knowledge, ideas, experiences, research results, and information in the field of manufacturing. The range of topics addressed is wide, including, for example, machine tool research and in-machine measurements, progress in CAD/CAM technologies, rapid prototyping and reverse engineering, nanomanufacturing, advanced material processing, functional and protective surfaces, and cyber-physical and reconfigurable manufacturing systems. The book will benefit readers by providing updates on key issues and recent progress in manufacturing engineering and technologies and will aid the transfer of valuable knowledge to the next generation of academics and practitioners. It will appeal to all who work or conduct research in this rapidly evolving field.
Download or read book Manufacturing Engineering written by Vishal S. Sharma and published by Springer Nature. This book was released on 2020-06-02 with total page 653 pages. Available in PDF, EPUB and Kindle. Book excerpt: This volume comprises select peer-reviewed contributions from the International Conference on Production and Industrial Engineering (CPIE) 2019. The contents focus on latest research in production and manufacturing engineering including case studies with analytical models and latest numerical approaches. The topics covered include micro, nano, and non-conventional machining, additive manufacturing, casting and forming, joining processes, vibrations and acoustics, materials and processing, product design and development, industrial automation, CAD/CAM and robotics, and sustainability in manufacturing. The book can be useful for students, researchers, and professionals working in manufacturing and production engineering, and other allied fields.
Download or read book Advanced Manufacturing Processes V written by Volodymyr Tonkonogyi and published by Springer Nature. This book was released on 2023-08-30 with total page 591 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book offers a timely snapshot of innovative research and developments at the interface between design, manufacturing, materials, mechanical and process engineering, and quality assurance. It covers various manufacturing processes, such as grinding, milling, broaching, and gear machining, including additive manufacturing, vibrational-centrifugal strengthening, laser-ultrasonic surface hardening, and antifriction coatings. It focuses on computer and numerical simulation, mathematical and integrated process modeling, parametric synthesis, virtual prototyping, automatic control, design of manufacturing, mechanical and mechatronics systems. It describes innovative cutting and abrasive processes and combined technologies. It also covers the formation, strengthening, and thermomechanical rolling. It also investigates the temperature field behavior, thermal stability, wear resistance, and other processes of various materials. Gathering the best papers presented at the 5th Grabchenko’s International Conference on Advanced Manufacturing Processes (InterPartner-2023), held on September 5–8, 2023, in Odessa, Ukraine, this book provides a comprehensive and up-to-date examination of design, manufacturing, mechanical, materials, and process engineering, as well as quality assurance trends and technologies. Yet, it also aims at fostering international and interdisciplinary communication and collaborations, offering a bridge between the academic and industrial sector.
