Download or read book Manufacturing Bricks with Fly Ash and Advanced Coal Combustion By products written by and published by . This book was released on 2009 with total page 18 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Sustainable Construction Materials and Technologies written by Yoon-Moon Chun and published by CRC Press. This book was released on 2020-11-25 with total page 817 pages. Available in PDF, EPUB and Kindle. Book excerpt: The construction materials industry is a major user of the world’s resources. While enormous progress has been made towards sustainability, the scope and opportunities for improvements are significant. To further the effort for sustainable development, a conference on Sustainable Construction Materials and Technologies was held at Coventry University, Coventry, U.K., from June 11th - 13th, 2007, to highlight case studies and research on new and innovative ways of achieving sustainability of construction materials and technologies. This book presents selected, important contributions made at the conference. Over 190 papers from over 45 countries were accepted for presentation at the conference, of which approximately 100 selected papers are published in this book. The rest of the papers are published in two supplementary books. Topics covered in this book include: sustainable alternatives to natural sand, stone, and Portland cement in concrete; sustainable use of recyclable resources such as fly ash, ground municipal waste slag, pozzolan, rice-husk ash, silica fume, gypsum plasterboard (drywall), and lime in construction; sustainable mortar, concrete, bricks, blocks, and backfill; the economics and environmental impact of sustainable materials and structures; use of construction and demolition wastes, and organic materials (straw bale, hemp, etc.) in construction; sustainable use of soil, timber, and wood products; and related sustainable construction and rehabilitation technologies.
Download or read book Coal Combustion Byproducts written by United States. Congress. House. Committee on Small Business. Subcommittee on Rural Development, Entrepreneurship, and Trade and published by . This book was released on 2010 with total page 204 pages. Available in PDF, EPUB and Kindle. Book excerpt: "The subcommittee has called this hearing so that members might learn more about coal ash, the small businesses that turn coal ash into useful products and the concerns that these businesses have about the proposed Federal regulations that they believe may have a negative effect on their industry ... The EPA has recently issued two proposals for regulating coal ash. One would regulate coal ash as a solid waste and would provide very limited Federal enforceability and may not provide adequate protection of the environment and human health. The other would list coal ash as a special waste under the Hazardous Waste Subtitle in the Resource Conservation and Recovery Act, Subtitle C. The second option is one that we will focus on ... since it has generated great concerns among small businesses across this country. These businesses, many of which are represented here today, have reason to believe that regulating coal ash under Subtitle C, even as a special waste, will open recycling operations to added litigation and a stigma that will discourage the ... use of the products made with recycled coal ash."--P. 1-2.
Download or read book Advanced Ceramic Materials written by Ashutosh Tiwari and published by John Wiley & Sons. This book was released on 2016-08-12 with total page 448 pages. Available in PDF, EPUB and Kindle. Book excerpt: Ceramic materials are inorganic and non-metallic porcelains, tiles, enamels, cements, glasses and refractory bricks. Today, "ceramics" has gained a wider meaning as a new generation of materials influence on our lives; electronics, computers, communications, aerospace and other industries rely on a number of their uses. In general, advanced ceramic materials include electro-ceramics, optoelectronic-ceramics, superconductive ceramics and the more recent development of piezoelectric and dielectric ceramics. They can be considered for their features including mechanical properties, decorative textures, environmental uses, energy applications, as well as their usage in bio-ceramics, composites, functionally graded materials, intelligent ceramics and so on. Advanced Ceramic Materials brings together a group of subject matter experts who describe innovative methodologies and strategies adopted in the research and development of the advanced ceramic materials. The book is written for readers from diverse backgrounds across chemistry, physics, materials science and engineering, medical science, pharmacy, environmental technology, biotechnology, and biomedical engineering. It offers a comprehensive view of cutting-edge research on ceramic materials and technologies. Divided into 3 parts concerning design, composites and functionality, the topics discussed include: Chemical strategies of epitaxial oxide ceramics nanomaterials Biphasic, triphasic and multiphasic calcium orthophosphates Microwave assisted processing of advanced ceramic composites Continuous fiber reinforced ceramic matrix composites Yytria and magnesia doped alumina ceramic Oxidation induced crack healing SWCNTs vs MWCNTs reinforcement agents Organic and inorganic wastes in clay brick production Functional tantalum oxides Application of silver tin research on hydroxyapatite
Download or read book Final Technical Report written by Illinois Clean Coal Institute and published by . This book was released on 2005 with total page 144 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Energy Research Abstracts written by and published by . This book was released on 1992-03 with total page 358 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Publications of the State of Illinois written by Illinois. Office of Secretary of State and published by . This book was released on 2009 with total page 94 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Coal Combustion Products CCPs written by Tom Robl and published by Woodhead Publishing. This book was released on 2017-05-03 with total page 0 pages. Available in PDF, EPUB and Kindle. Book excerpt: Coal Combustion Products (CCPs): Their Nature, Utilization and Beneficiation is a valuable resource for engineers and scientists from the coal, cement, concrete, and construction industries seeking an in-depth guide to the characteristics, utilization, beneficiation, and environmental impacts of coal combustion by-products. Researchers in universities working in this area will also find much to expand their knowledge. The book provides a detailed overview of the different waste materials produced during power generation from coal, exploring their nature, beneficiation techniques, applications, and environmental impacts. Strong focus is placed on coal fly ash, bottom ash, and flue gas desulfurization materials, and their employment in cement, concrete, gypsum products, aggregates, road construction, geotechnics, and agriculture, among other products and industries. Part 1 focuses on the nature of coal ashes, with chapters on their origin, generation, and storage, both in ponds and landfill. The coal combustion by-products produced as a result of clean coal technologies are the focus of the final chapter in the section. The next group of chapters in Part 2 considers the utilization of different waste materials, including the key products coal fly ash, bottom ash, and flue gas desulfurization materials. This is followed by a contribution reviewing the latest research into innovative and advanced uses for coal ash. After an introduction to ash quality problems and quality monitoring, Part 3 concentrates on the essential area of by-product beneficiation techniques, in other words how to maximize the quality of materials for the end user. Topics covered include separation methods, thermal processing, and chemical passivation. The final section of the book addresses environmental issues, including the use of coal combustion by-products in green construction materials and the essential health and safety considerations associated with their use.
Download or read book Advance Upcycling of By products in Binder and Binder Based Materials written by Mehmet Serkan Kirgiz and published by Elsevier. This book was released on 2023-09-23 with total page 438 pages. Available in PDF, EPUB and Kindle. Book excerpt: Advance Upcycling of By-products in Binder and Binder-Based Materials focuses on research trends in binder and binder-based materials containing by-products. The book covers the properties of these materials, both physical and mechanical, and their durability, as well as their inner structure, both at the micro and nano-scale. The reuse of by-products within binder systems is also discussed as well as innovative approaches and advanced solutions for making cost-, ecology-, and environmental-friendly hydraulic binder and binder-based materials from the upcycling of by-products. The book also looks at additive manufacturing and explains the effects of by-products on the properties of binder and binder-based materials. As a consequence of the popularity of additive manufacturing, various by-product materials, in terms of constructional application, are also identified. These include latent hydraulic supplements, activators of transport properties, and increase in inner strength and durability. The book will be an essential reference resource for academic and industrial researchers, materials scientists and civil engineers and all those who are working in the development of 'greener' construction materials and utilization of waste and other fine by-products in the production of environmentally-friendly concrete. - Provides a detailed review of recent research on the upcycling of by-products for use in binder and binder-based materials - Presents innovative approaches and advanced solutions for making environmentally-friendly hydraulic binders and binder-based materials from the upcycling of by-products - Includes mathematical models for strength estimation
Download or read book Fossil Energy Update written by and published by . This book was released on 1978 with total page 944 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Report to Her Majesty s Principal Secretary of State For the Home Department from the Poor Law Commissioners on an Inquiry Into the Sanitary Condition of the Labouring Population of Great Britain With Appendices written by Edwin Chadwick and published by BoD – Books on Demand. This book was released on 2023-09-06 with total page 497 pages. Available in PDF, EPUB and Kindle. Book excerpt: Reproduction of the original.
Download or read book Pulse Jet Filtration an Effective Way to Control Industrial Pollution written by Arunangshu Mukhopadhyay and published by Routledge. This book was released on 2019-03-15 with total page 102 pages. Available in PDF, EPUB and Kindle. Book excerpt: Pulse-jet filtration is described as one of the most efficient technologies in controlling industrial pollution across the world. This work presents the fundamental concepts involved in designing and developing pulse-jet filters under varied situations. It provides a comprehensive knowledge base for the proper design and development of filter media and ultimately for successfully running a filter unit. The book also discusses technical and commercially attractive solutions for the successful operation of industries integrated with pollution control equipment that maintain clean air requirements.
Download or read book Proceedings of the Mineral Waste Utilization Symposium written by and published by . This book was released on 1970 with total page 392 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Global Roadmap for Ceramic and Glass Technology written by Stephen W. Freiman and published by John Wiley & Sons. This book was released on 2007-06-29 with total page 964 pages. Available in PDF, EPUB and Kindle. Book excerpt: This is the only global roadmap that identifies the technical and manufacturing challenges associated with the development and expansion of commercial markets for ceramics and glass. Featuring presentations by industry leaders at the 1st International Congress on Ceramics (ICC) held in 2006, it suggests positive, proactive ways to address these challenges. The ICC Global Roadmap contains the following content: 1) Summary papers prepared by the invited speakers before the meeting 2) A detailed account of the presentation of each invited speaker written by an editor who attends the presentation 3) A summary account and future recommendations for the industry on each topic covered written by the board and the president of this meeting, Dr. Stephen Freiman (National Institutes of Standards and Technology) 4) The CDRom accompanying the book contains all of the above as well as pdfs of the presentations for non-invited speakers, including posters presented and discussed.
Download or read book Flue Gas Desulfurization and Industrial Minerals written by M. Michael Miller and published by . This book was released on 1993 with total page 720 pages. Available in PDF, EPUB and Kindle. Book excerpt: Contains 4,101 references on FGD [Flue Gas Desulfurization] ... primarily from 1982 through June 1993. Complements the "Flue Gas Desulfurization and Denitrification" bibliography published by the U.S. Dept. of Energy in Jan. 1985. References were located on the Energy, Science and Technology, Pollution Abstracts, and Environmental Bibliography databases. Primarily covers FGD and the use of industrial minerals in the desulfurization process or in by-product utilization and disposal. Emphasizes post-combustion removal of sulfur dioxide through processes such as in-duct injection and wet and dry scrubbing.
Download or read book Annual Report written by Illinois State Geological Survey and published by . This book was released on 2007 with total page 68 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Trends in the Use of Coal Ash written by Leslie L. Sloss and published by . This book was released on 1999 with total page 74 pages. Available in PDF, EPUB and Kindle. Book excerpt:
