Download or read book Manufacturing Automation Management written by Roger W. Bolz and published by Springer Science & Business Media. This book was released on 2012-12-06 with total page 344 pages. Available in PDF, EPUB and Kindle. Book excerpt: Automation has been employed for many years to provide a multitude of reasonably priced products for the American consumer. However, it has become evident that its real character as a manufacturing systems approach needs to be examined carefully for a better appreciation. In this book the purpose is to examine automation technology in its broadest sense and develop not only an understanding but also present some of the engineering and organization "know-how" by which manufacturing management can more effectively utilize automation to improve pro ductivity and combat rising costs in the years ahead. Fundamentally, this book is addressed to manufacturing managers, and the material presented in a manner that will provide the knowledge for assuring success in automating. In addition, it highlights the man ufacturing research and long-range planning that will be required for creating the new manufacturing technology so necessary for assuring success in future automation efforts. One of the important facts emphasized in this text is that automation is not merely robotics ar another kind or type of machinery. To effect true productivity improvement requires a fresh look at the entire pro duction process or facility-as a completely integrated system. With the developments of the past few years, rapid advances in the technology and the "tools of automation" have brought this imperative goal within the reasonable grasp of manufacturing management in almost every segment of industry. However, to utilize this progress, it is necessary to acquire a working understanding of all facets of automation.

Download or read book Manufacturing Automation written by Yusuf Altintas and published by Cambridge University Press. This book was released on 2012-01-16 with total page 381 pages. Available in PDF, EPUB and Kindle. Book excerpt: Metal cutting is widely used in producing manufactured products. The technology has advanced considerably along with new materials, computers and sensors. This new edition considers the scientific principles of metal cutting and their practical application to manufacturing problems. It begins with metal cutting mechanics, principles of vibration and experimental modal analysis applied to solving shop floor problems. There is in-depth coverage of chatter vibrations, a problem experienced daily by manufacturing engineers. Programming, design and automation of CNC (computer numerical control) machine tools, NC (numerical control) programming and CAD/CAM technology are discussed. The text also covers the selection of drive actuators, feedback sensors, modelling and control of feed drives, the design of real time trajectory generation and interpolation algorithms and CNC-oriented error analysis in detail. Each chapter includes examples drawn from industry, design projects and homework problems. This is ideal for advanced undergraduate and graduate students and also practising engineers.

Download or read book Industrial Automation and Process Control written by Jon Stenerson and published by . This book was released on 2003 with total page 0 pages. Available in PDF, EPUB and Kindle. Book excerpt: B> Covers PLCs, process control, sensors, robotics, fluid power, CNC, Lockout/Tagout and safety, and more. Offers such a wide array of topics that readers can use this book as a reference for many different issues in industrial automation. Featuring the greatest breadth and depth of coverage available on the subject, this practical book explores the main topics in industrial automation; and provides a much-needed, understandable discussion of process control. A comprehensive reference for professionals in industrial automation.

Download or read book Control Performance Management in Industrial Automation written by Mohieddine Jelali and published by Springer Science & Business Media. This book was released on 2012-10-31 with total page 489 pages. Available in PDF, EPUB and Kindle. Book excerpt: Control Performance Management in Industrial Automation provides a coherent and self-contained treatment of a group of methods and applications of burgeoning importance to the detection and solution of problems with control loops that are vital in maintaining product quality, operational safety, and efficiency of material and energy consumption in the process industries. The monograph deals with all aspects of control performance management (CPM), from controller assessment (minimum-variance-control-based and advanced methods), to detection and diagnosis of control loop problems (process non-linearities, oscillations, actuator faults), to the improvement of control performance (maintenance, re-design of loop components, automatic controller re-tuning). It provides a contribution towards the development and application of completely self-contained and automatic methodologies in the field. Moreover, within this work, many CPM tools have been developed that goes far beyond available CPM packages. Control Performance Management in Industrial Automation: · presents a comprehensive review of control performance assessment methods; · develops methods and procedures for the detection and diagnosis of the root-causes of poor performance in complex control loops; · covers important issues that arise when applying these assessment and diagnosis methods; · recommends new approaches and techniques for the optimization of control loop performance based on the results of the control performance stage; and · offers illustrative examples and industrial case studies drawn from – chemicals, building, mining, pulp and paper, mineral and metal processing industries. This book will be of interest to academic and industrial staff working on control systems design, maintenance or optimisation in all process industries.

Download or read book Advanced Manufacturing and Automation V written by K. Wang and published by WIT Press. This book was released on 2016-02-03 with total page 453 pages. Available in PDF, EPUB and Kindle. Book excerpt: Advanced Manufacturing and Automation V contains the proceedings of the 5th International Workshop of Advanced Manufacturing and Automation (IWAMA 2015). This meeting continues the success of this important international workshop series and disseminates the works of academic and industrial experts, from around the world, in the areas of advanced manufacturing and automation. The disciplines of manufacturing and automation have attained paramount importance and are vital factors for the maintenance and improvement of the economy of a nation and the quality of life. Manufacturing and automation are advancing at a rapid pace and new technologies are constantly emerging in the fields. The challenges faced by today’s engineers are forcing them to keep on top of the emerging trends through continuous research and development. The papers comprising these proceedings cover various topics including: Robotics and automation; Computational intelligence; Design and optimization; Product life-cycle management; Integration of CAD/CAPP/CAM/CIMS; Advanced manufacturing systems; Manufacturing operations management; Knowledge-based manufacturing; Manufacturing quality control and management; Sustainable production; Diagnosis and prognosis of machines; Lean and agile manufacturing; Virtual and grid manufacturing; Resource and asset management; Logistics and supply chain management; RFID applications; Predictive maintenance; Reliability and maintainability in manufacturing; Project management; Renewable energy development; Environment protection; Intelligent detection.

Download or read book Industrial Automation Hands On written by Frank Lamb and published by McGraw Hill Professional. This book was released on 2013-07-22 with total page 369 pages. Available in PDF, EPUB and Kindle. Book excerpt: A practical guide to industrial automation concepts, terminology, and applications Industrial Automation: Hands-On is a single source of essential information for those involved in the design and use of automated machinery. The book emphasizes control systems and offers full coverage of other relevant topics, including machine building, mechanical engineering and devices, manufacturing business systems, and job functions in an industrial environment. Detailed charts and tables serve as handy design aids. This is an invaluable reference for novices and seasoned automation professionals alike. COVERAGE INCLUDES: * Automation and manufacturing * Key concepts used in automation, controls, machinery design, and documentation * Components and hardware * Machine systems * Process systems and automated machinery * Software * Occupations and trades * Industrial and factory business systems, including Lean manufacturing * Machine and system design * Applications

Download or read book Manufacturing Automation Management written by Roger W Bolz and published by . This book was released on 1985-09-26 with total page 268 pages. Available in PDF, EPUB and Kindle. Book excerpt:

Download or read book Planning for Factory Automation written by Peter G. Vanderspek and published by McGraw-Hill Companies. This book was released on 1993 with total page 200 pages. Available in PDF, EPUB and Kindle. Book excerpt: Very Good,No Highlights or Markup,all pages are intact.

Download or read book Drives and Control for Industrial Automation written by Kok Kiong Tan and published by Springer Science & Business Media. This book was released on 2010-11-16 with total page 195 pages. Available in PDF, EPUB and Kindle. Book excerpt: Drives and Control for Industrial Automation presents the material necessary for an understanding of servo control in automation. Beginning with a macroscopic view of its subject, treating drives and control as parts of a single system, the book then pursues a detailed discussion of the major components of servo control: sensors, controllers and actuators. Throughout, the mechatronic approach – a synergistic integration of the components – is maintained, in keeping with current practice. The authors’ holistic approach does not preclude the reader from learning in a step-by-step fashion – each chapter contains material that can be studied separately without compromising understanding. Drives are described in several chapters according to the way they are usually classified in industry, each comprised of its actuators and sensors. The controller is discussed alongside. Topics of recent and current interest – piezoelectricity, digital communications and future trends – are detailed in their own chapters.

Download or read book Factory Automation and Information Management written by M. Munir Ahmad and published by CRC Press. This book was released on 1991 with total page 1028 pages. Available in PDF, EPUB and Kindle. Book excerpt: Papers presented at the Factory Automation and Information Management Conference.

Download or read book Assembly Automation written by Frank J. Riley and published by Industrial Press Inc.. This book was released on 1996 with total page 322 pages. Available in PDF, EPUB and Kindle. Book excerpt: Success in automatic assembly design and operation comes from an awareness and sensitivity to a multitude of small design details, and only Frank Riley could pack so much knowledge and experience into a practical and authoritative guide to the selection and application of automatic assembly machinery. A vast amount of practical information about all aspects of automated assembly can be found in this important revised edition.

Download or read book Overview of Industrial Process Automation written by K.L.S. Sharma and published by Elsevier. This book was released on 2016-10-25 with total page 492 pages. Available in PDF, EPUB and Kindle. Book excerpt: Overview of Industrial Process Automation, Second Edition, introduces the basics of philosophy, technology, terminology, and practices of modern automation systems through the presentation of updated examples, illustrations, case studies, and images. This updated edition adds new developments in the automation domain, and its reorganization of chapters and appendixes provides better continuity and seamless knowledge transfer. Manufacturing and chemical engineers involved in factory and process automation, and students studying industrial automation will find this book to be a great, comprehensive resource for further explanation and study. Presents a ready made reference that introduces all aspects of automation technology in a single place with day-to-day examples Provides a basic platform for the understanding of industry literature on automation products, systems, and solutions Contains a guided tour of the subject without the requirement of any previous knowledge on automation Includes new topics, such as factory and process automation, IT/OT Integration, ISA 95, Industry 4.0, IoT, etc., along with safety systems in process plants and machines

Download or read book Computer Assisted Management and Control of Manufacturing Systems written by Spyros G. Tzafestas and published by Springer Science & Business Media. This book was released on 2012-12-06 with total page 504 pages. Available in PDF, EPUB and Kindle. Book excerpt: Modem manufacturing systems involve many processes and operations that can be monitored and controlled at several levels of intelligence. At the highest level there is a computer that supervises the various manufacturing functions, whereas at the lowest level there are stand alone computer controlled systems of manufacturing processes and robotic cells. Until recenty computer-aided manufacturing systems constituted isolated "islands" of automation, each oriented to a particular application, but present day systems offer integrated approaches to manufacturing and enterprise operations. These modem systems, known as computer-integrated manufacturing (CIM) systems, can easily meet the current performance and manufacturing competitiveness requirements under strong environmental changes. CIM systems are much of a challenge, and imply a systemic approach to the design and operation of a manufacturing enterprise. Actualy, a CIM system must take into account in a unified way the following three views : the user view, the technology view, and the enterprise view. This means that CIM includes both the engineering and enterprise planning and control activities, as well as the information flow activities across all the stages of the system.

Download or read book Factory Information Systems written by John Gaylord and published by CRC Press. This book was released on 2020-11-25 with total page 256 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book tells how to develop a successful factory information system to manage and control computer integrated manufacturing (CIM)operations. It is directed and dedicated to those people who are involved in the preservation and enhancement of historical manufacturing strength.

Download or read book Artificial Intelligence in Industrial Decision Making Control and Automation written by S.G. Tzafestas and published by Springer Science & Business Media. This book was released on 2012-12-06 with total page 778 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book is concerned with Artificial Intelligence (AI) concepts and techniques as applied to industrial decision making, control and automation problems. The field of AI has been expanded enormously during the last years due to that solid theoretical and application results have accumulated. During the first stage of AI development most workers in the field were content with illustrations showing ideas at work on simple problems. Later, as the field matured, emphasis was turned to demonstrations that showed the capability of AI techniques to handle problems of practical value. Now, we arrived at the stage where researchers and practitioners are actually building AI systems that face real-world and industrial problems. This volume provides a set of twenty four well-selected contributions that deal with the application of AI to such real-life and industrial problems. These contributions are grouped and presented in five parts as follows: Part 1: General Issues Part 2: Intelligent Systems Part 3: Neural Networks in Modelling, Control and Scheduling Part 4: System Diagnostics Part 5: Industrial Robotic, Manufacturing and Organizational Systems Part 1 involves four chapters providing background material and dealing with general issues such as the conceptual integration of qualitative and quantitative models, the treatment of timing problems at system integration, and the investigation of correct reasoning in interactive man-robot systems.

Download or read book Handbook of Research on Developments and Trends in Industrial and Materials Engineering written by Sahoo, Prasanta and published by IGI Global. This book was released on 2019-11-01 with total page 524 pages. Available in PDF, EPUB and Kindle. Book excerpt: In today’s modernized world, new research and empirical findings are being conducted and found within various professional industries. The field of engineering is no different. Industrial and material engineering is continually advancing, making it challenging for practitioners to keep pace with the most recent trends and methods. Engineering professionals need a handbook that provides up-to-date research on the newest methodologies in this imperative industry. The Handbook of Research on Developments and Trends in Industrial and Materials Engineering is a collection of innovative research on the theoretical and practical aspects of integrated systems within engineering. This book provides a forum for professionals to understand the advancing methods of engineering. While highlighting topics including operations management, decision analysis, and communication technology, this book is ideally designed for researchers, managers, engineers, industrialists, manufacturers, academicians, policymakers, scientists, and students seeking current research on recent findings and modern approaches within industrial and materials engineering.

Download or read book Handbook of Design Manufacturing and Automation written by Richard C. Dorf and published by Wiley-Interscience. This book was released on 1994 with total page 1072 pages. Available in PDF, EPUB and Kindle. Book excerpt: Comprehensive, detailed, and organized for speedy reference—everything you need to know about modern manufacturing technology… From concurrent engineering to fixture design for machining systems, from robotics and artificial intelligence to facility layout planning and automated CAD-based inspection, this handbook provides all the information you need to design, plan, and implement a modern, efficient manufacturing system tailored to your company’s special needs and requirements. Handbook of Design, Manufacturing and Automation does more than simply present the characteristics and specifications of each technology—much more. Each technology is discussed both in terms of its own capabilities and in terms of its compatibility with other technologies, and the trade-offs involved in choosing one option over another are explored at length. An entire section is devoted to the business aspects of converting to the new technologies, including acquisition of automation, managing advanced manufacturing technology, and issues of cost and financing. The focus is on incorporating these technologies into a cohesive whole—an efficient, cost-effective manufacturing system. Other important topics include: Design for automated manufacturing Nontraditional manufacturing processes Machine tool programming techniques and trends Precision engineering and micromanufacturing Computer-integrated product planning and control Image processing for manufacturing And much more