Download or read book Manufacturing Assembly Handbook written by Bruno Lotter and published by Butterworth-Heinemann. This book was released on 2013-10-22 with total page 415 pages. Available in PDF, EPUB and Kindle. Book excerpt: Manufacturing Assembly Handbook identifies the possibilities for the rationalization of assembly in relation to the production rate and the product design. This book is based on practical experience for practical application and will give experts in the field of rationalization guidelines for the solution of rationalization problems. Topics discussed in the text include the determination of the economic efficiency of assembly concepts, modules for the automation of assembly processes, design of assembly machines, and design of flexible-assembly systems. The integration of parts manufacturing processes into assembly equipment or of assembly operations into parts production equipment, planning and efficiency of automated assembly systems, and the operation of automated assembly systems are covered as well. Production engineers and managers and students of production technology will find the book very useful.
Download or read book Product Design for Manufacture and Assembly Third Edition written by Geoffrey Boothroyd and published by CRC Press. This book was released on 2010-12-08 with total page 710 pages. Available in PDF, EPUB and Kindle. Book excerpt: Hailed as a groundbreaking and important textbook upon its initial publication, the latest iteration of Product Design for Manufacture and Assembly does not rest on those laurels. In addition to the expected updating of data in all chapters, this third edition has been revised to provide a top-notch textbook for university-level courses in product design and manufacturing design. The authors have added a comprehensive set of problems and student assignments to each chapter, making the new edition substantially more useful. See what’s in the Third Edition: Updated case studies on the application of DFMA techniques Extended versions of the classification schemes of the features of products that influence the difficulty of handling and insertion for manual, high-speed automatic, and robot assembly Discussions of changes in the industry such as increased emphasis on the use of surface mount devices New data on basic manufacturing processes Coverage of powder injection molding Recognized as international experts on the re-engineering of electro-mechanical products, the methods and guidelines developed by Boothroyd, Dewhurst, and Knight have been documented to provide significant savings in the product development process. Often attributed with creating a revolution in product design, the authors have been working in product design manufacture and assembly for more than 25 years. Based on theory yet highly practical, their text defines the factors that influence the ease of assembly and manufacture of products for a wide range of the basic processes used in industry. It demonstrates how to develop competitive products that are simpler in configuration and easier to manufacture with reduced overall costs.
Download or read book Manufacturing assembly handbook written by Bruno Lotter and published by . This book was released on 1997 with total page 96 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Handbook of Product Design for Manufacturing written by James G. Bralla and published by McGraw-Hill Companies. This book was released on 1986 with total page 1158 pages. Available in PDF, EPUB and Kindle. Book excerpt: A Practical Guide to Low-Cost Production offers a detailed overview of common manufacturing processes for the designer or manufacturing engineer. Covers a full range of processes from metal stamping, forging, casting, molding, thermoforming, and more. Specifies optimum material grades and dimensional tolerance data for each production process.
Download or read book Design for Manufacturability Handbook written by James G. Bralla and published by McGraw Hill Professional. This book was released on 1999 with total page 1361 pages. Available in PDF, EPUB and Kindle. Book excerpt: Offers a blueprint for various stages of the manufacturing process. This handbook provides directions for solid and practical design, including a quick check of do's and don'ts as well as specific tips for developing the most producible design. It also includes the details needed to forecast a successful design project.
Download or read book Manufacturing Process Selection Handbook written by K. G. Swift and published by Butterworth-Heinemann. This book was released on 2013-02-15 with total page 457 pages. Available in PDF, EPUB and Kindle. Book excerpt: Manufacturing Process Selection Handbook provides engineers and designers with process knowledge and the essential technological and cost data to guide the selection of manufacturing processes early in the product development cycle. Building on content from the authors’ earlier introductory Process Selection guide, this expanded handbook begins with the challenges and benefits of identifying manufacturing processes in the design phase and appropriate strategies for process selection. The bulk of the book is then dedicated to concise coverage of different manufacturing processes, providing a quick reference guide for easy comparison and informed decision making. For each process examined, the book considers key factors driving selection decisions, including: Basic process descriptions with simple diagrams to illustrate Notes on material suitability Notes on available process variations Economic considerations such as costs and production rates Typical applications and product examples Notes on design aspects and quality issues Providing a quick and effective reference for the informed selection of manufacturing processes with suitable characteristics and capabilities, Manufacturing Process Selection Handbook is intended to quickly develop or refresh your experience of selecting optimal processes and costing design alternatives in the context of concurrent engineering. It is an ideal reference for those working in mechanical design across a variety of industries and a valuable learning resource for advanced students undertaking design modules and projects as part of broader engineering programs. Provides manufacturing process information maps (PRIMAs) provide detailed information on the characteristics and capabilities of 65 processes in a standard format Includes process capability charts detailing the processing tolerance ranges for key material types Offers detailed methods for estimating costs, both at the component and assembly level
Download or read book Manufacturing System and Process Development for Vehicle Assembly written by He Tang and published by SAE International. This book was released on 2017-12-20 with total page 358 pages. Available in PDF, EPUB and Kindle. Book excerpt: The evolution and execution of automotive manufacturing are explored in this fundamental manual. It is an excellent reference for entry level manufacturing engineers and also serves as a training guide for nonmanufacturing professionals. The book covers the major areas of vehicle assembly manufacturing and addresses common approaches and procedures of the development process. Having held positions as both a University Professor and as a Lead Engineering Specialist in industry, the author draws on his experience in both theory and application to fill the gap between academic research and industrial practices. This concisely written, comprehensive review discusses the sophisticated principles and concepts of automotive manufacturing from development to applications and includes: 250 illustrations and 90 tables. End-of-chapter review questions. Research topics for in-depth case studies, literature reviews, and/or course projects. Analytical problems for additional practice. Directly extracted and summarized from automotive manufacturing practices, this book serves as an essential manual. The subject is complemented by the author’s first book, Automotive Vehicle Assembly Processes and Operations Management, which provides even greater depth to the complex endeavor of modern automotive manufacturing.
Download or read book Design for Manufacturing and Assembly written by O. Molloy and published by Springer Science & Business Media. This book was released on 2012-12-06 with total page 220 pages. Available in PDF, EPUB and Kindle. Book excerpt: In order to compete in the current commercial environment companies must produce greater product variety, at lower cost, all within a reduced product life cycle. To achieve this, a concurrent engineering philosophy is often adopted. In many cases the main realization of this is Design for Manufacture and Assembly (DFM/A). There is a need for in-depth study of the architectures for DFM/A systems in order that the latest software and knowledge-based techniques may be used to deliver the DFM/A systems of tomorrow. This architecture must be based upon complete understanding of the issues involved in integrating the design and manufacturing domains. This book provides a comprehensive view of the capabilities of advanced DFM/A systems based on a common architecture.
Download or read book The Electronics Assembly Handbook written by Frank Riley and published by Springer Science & Business Media. This book was released on 2013-06-29 with total page 576 pages. Available in PDF, EPUB and Kindle. Book excerpt: The assembly of electronic circuit boards has emerged as one of the most significant growth areas for robotics and automated assembly. This comprehensive volume, which is an edited collection of material mostly published in "Assembly Engineering" and "Electronic Packaging and Production", will provide an essential reference for engineers working in this field, including material on Multi Layer Boards, Chip-on-board and numerous case studies. Frank J. Riley is senior vice-president of the Bodine Corporation and a world authority on assembly automation.
Download or read book Assembly Automation written by Frank J. Riley and published by Industrial Press Inc.. This book was released on 1996 with total page 322 pages. Available in PDF, EPUB and Kindle. Book excerpt: Success in automatic assembly design and operation comes from an awareness and sensitivity to a multitude of small design details, and only Frank Riley could pack so much knowledge and experience into a practical and authoritative guide to the selection and application of automatic assembly machinery. This book provides a thorough overview of management, engineering, and machine operator considerations necessary to ensure successful specification, procurement, design, manufacture, installation, and sustained productivity of new assembly systems. Places more emphasis on how corporations can employ an integrated systems approach to automatic assembly to respond to product quality, productivity, global manufacturing competitiveness, and increasingly aggressive consumerism. Includes a vast amount of practical information about all aspects of automated assembly. Thoroughly discusses several unusual and valuable topics, including a look into the 21st Century and the emerging influence of simultaneous engineering in manufacturing.
Download or read book Area Array Packaging Handbook written by Ken Gilleo and published by McGraw Hill Professional. This book was released on 2002 with total page 832 pages. Available in PDF, EPUB and Kindle. Book excerpt: *Covers design, packaging, construction, assembly, and application of all three approaches to Area Array Packaging: Ball Grid Array (BGA), Chip Scale Package (CSP), and Flip Chip (FC) *Details the pros and cons of each technology with varying applications *Examines packaging ramifications of high density interconnects (HDI)
Download or read book Assembly Processes written by Richard Crowson and published by CRC Press. This book was released on 2006-01-13 with total page 169 pages. Available in PDF, EPUB and Kindle. Book excerpt: Today's fast-paced manufacturing culture demands a handbook that provides how-to, no-holds-barred, no-frills information. Completely revised and updated, the Handbook of Manufacturing Engineering is now presented in four volumes. Keeping the same general format as the first edition, this second edition not only provides more information but makes i
Download or read book Handbook of Flexible Manufacturing Systems written by Nand K. Jha and published by Academic Press. This book was released on 2012-12-02 with total page 347 pages. Available in PDF, EPUB and Kindle. Book excerpt: This handbook is a compilation of the current practical knowledge of flexible manufacturing systems (FMS). FMS allow manufacturing plants of all sizes to reduce their inventory while increasing their ability to meet consumer demands. By controlling automatic guided vehicles, robots, and machine tools with one central computer, products can now be produced in a variety of styles and models all at the same time. FMS are designed to adapt quickly and economically to changes in requirements and to unpredictable events. This guide explains how to effectively employ these useful new systems. Includes specifications for software to implement simulation modeling Surveys practical applications in the workplace Presents materials in a step-by-step workbook style
Download or read book Assembly Processes written by Richard Crowson and published by CRC Press. This book was released on 2006-01-13 with total page 176 pages. Available in PDF, EPUB and Kindle. Book excerpt: Volume four of the second edition of the comprehensive Handbook of Manufacturing Engineering deals exclusively with the finishing of a product. The proper selection of assembly process is critical, as it influences the production rate, quality, and cost of the product through tradeoffs in productivity of the facility and workers. The book covers manual assembly as well as automation. Recognizing the growing importance and capabilities of automation, the full spectrum of automation is covered, including various types of automated machines, basic automation concepts, and flexible automation. Coverage also includes packaging and an illustrative chapter devoted to printed board assemblies.
Download or read book Process Selection written by K. G. Swift and published by Elsevier. This book was released on 2003-06-02 with total page 333 pages. Available in PDF, EPUB and Kindle. Book excerpt: The definitive practical guide to choosing the optimum manufacturing process, written for students and engineers. Process Selection provides engineers with the essential technological and economic data to guide the selection of manufacturing processes. This fully revised second edition covers a wide range of important manufacturing processes and will ensure design decisions are made to achieve optimal cost and quality objectives. Expanded and updated to include contemporary manufacturing, fabrication and assembly technologies, the book puts process selection and costing into the context of modern product development and manufacturing, based on parameters such as materials requirements, design considerations, quality and economic factors. Key features of the book include: manufacturing process information maps (PRIMAs) provide detailed information on the characteristics and capabilities of 65 processes and their variants in a standard format; process capability charts detailing the processing tolerance ranges for key material types; strategies to facilitate process selection; detailed methods for estimating costs, both at the component and assemby level. The approach enables an engineer to understand the consequences of design decisions on the technological and economic aspects of component manufacturing, fabrication and assembly. This comprehensive book provides both a definitive guide to the subject for students and an invaluable source of reference for practising engineers. Manufacturing process information maps (PRIMAs) provide detailed information on the characteristics and capabilities of 65 processes in a standard format Process capability charts detail the processing tolerance ranges for key material types Detailed methods for estimating costs, both at the component and assembly level
Download or read book Lean Assembly written by Michel Baudin and published by CRC Press. This book was released on 2002-10-02 with total page 296 pages. Available in PDF, EPUB and Kindle. Book excerpt: With examples drawn from aerospace, electronics, household appliance, personal products, and automotive industries, Lean Assembly covers the engineering of assembly operations through: Characterizing the demand in terms of volume by product and product family, component consumption, seasonal variability and life cycle. Matching the physical structure of the shop floor to the demand with the goal of approaching takt-driven production as closely as possible. Working out the details of assembly tasks station by station, including station sizing, tooling, fixturing, operator instructions, part presentation, conveyance between stations, and the geometry of assembly lines as a whole. Incorporating mistake-proofing, successive inspection, and test operations for quality assurance. Lean Assembly differs from most other books on lean manufacturing in that it focuses on technical content as a driver for implementation methods. The emphasis is on exactly what should be done. This book should be the "dog-eared" and "penciled-in" resource on every assembly engineer's desk.
Download or read book Handbook of Lapping and Polishing written by Ioan D. Marinescu and published by CRC Press. This book was released on 2006-11-20 with total page 510 pages. Available in PDF, EPUB and Kindle. Book excerpt: Lapping and polishing are currently the most precise surface finishing processes for mechanical and electronic components. Unfortunately, most improvements in either methods or understanding of the physical processes involved are closely guarded as proprietary information. The Handbook of Lapping and Polishing is the first source in English to brin
