Download or read book Manufacturing and Engineering Technology ICMET 2014 written by Ai Sheng and published by CRC Press. This book was released on 2014-11-24 with total page 638 pages. Available in PDF, EPUB and Kindle. Book excerpt: Manufacturing and Engineering Technology brings together around 200 peer-reviewed papers presented at the 2014 International Conference on Manufacturing and Engineering Technology, held in San-ya, China, October 17-19, 2014. The main objective of these proceedings is to take the Manufacturing and Engineering Technology discussion a step further. Contributions cover Manufacture, Mechanical, Materials Science, Industrial Engineering, Control, Information and Computer Engineering. Furthermore, these proceedings provide a platform for researchers, engineers, academics as well as industrial professionals from all over the world to present their research results and development activities in Manufacturing Science and Engineering Technology.
Download or read book Agri Food Supply Chain Management Breakthroughs in Research and Practice written by Management Association, Information Resources and published by IGI Global. This book was released on 2016-09-27 with total page 540 pages. Available in PDF, EPUB and Kindle. Book excerpt: The development of a sustainable agricultural system is a critical concern for any nation in modern society. By implementing proper supply chain processes, available natural resources and food can be better utilized. Agri-Food Supply Chain Management: Breakthroughs in Research and Practice is a compendium of emerging perspectives on the development of an effective agricultural value chain and the optimization of supply chain management within the agriculture and food sectors. Highlighting theoretical frameworks, real-world applications, and future outlooks, this book is a primary reference source for professionals, students, practitioners, and managers actively involved in agricultural development.
Download or read book Engineering and Manufacturing Technologies written by HJ. Patthi Bin Hussain and published by . This book was released on 2014 with total page 771 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Handbook of Research on Global Supply Chain Management written by Christiansen, Bryan and published by IGI Global. This book was released on 2015-11-12 with total page 718 pages. Available in PDF, EPUB and Kindle. Book excerpt: Supply Chain Management (SCM) has always been an important aspect of an enterprise’s business model and an effective supply chain network is essential to remaining competitive in a global environment. By properly managing the flow of goods and services, businesses can operate more efficiently while managing most of the workload behind-the-scenes. The Handbook of Research on Global Supply Chain Management is an in-depth reference source that covers emerging issues and relevant applications of information pertaining to supply chain management from an international perspective. Featuring coverage on topics such as the global importance of SCMs to strategies for producing an effective supply chain, this comprehensive publication is an essential resource for academics and business professionals alike interested in uncovering managerial insight and logistics solutions.
Download or read book Manufacturing Engineering Technology written by Serope Kalpakjian and published by Pearson Higher Ed. This book was released on 2013-04-18 with total page 1214 pages. Available in PDF, EPUB and Kindle. Book excerpt: This is the eBook of the printed book and may not include any media, website access codes, or print supplements that may come packaged with the bound book. For courses in manufacturing processes at two- or four-year schools. This text also serves as a valuable reference text for professionals. An up-to-date text that provides a solid background in manufacturing processes Manufacturing Engineering and Technology, 7/e , presents a mostly qualitative description of the science, technology, and practice of manufacturing. This includes detailed descriptions of manufacturing processes and the manufacturing enterprise that will help introduce students to important concepts. With a total of 120 examples and case studies, up-to-date and comprehensive coverage of all topics, and superior two-color graphics, this text provides a solid background for manufacturing students and serves as a valuable reference text for professionals.
Download or read book Advances in Manufacturing Engineering and Technology written by M. Adithan and published by . This book was released on 2010 with total page 0 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Manufacturing Engineering Technology Pearson Etext Access Card written by Serope Kalpakjian and published by Pearson. This book was released on 2019-05-07 with total page 9998 pages. Available in PDF, EPUB and Kindle. Book excerpt: A comprehensive text on the science, engineering, and technology of manufacturing. In Manufacturing Engineering and Technology , 8th Edition, the authors continue their efforts to present a comprehensive, balanced, and, most importantly, an up-to-date coverage of the science, engineering, and technology of manufacturing. It places an emphasis on the interdisciplinary nature of every manufacturing activity, from complex interactions between materials, design, process, and manufacturing process and operations. The text is designed to help students learn not only the science and engineering that drives manufacturing, but to understand and appreciate manufacturing's important role in our modern, global economy. With more than 120 examples and case studies, the text presents students with a breadth of challenges while providing them the tools and encouragement to explore solutions to those challenges. With the 8th Edition, Manufacturing Engineering and Technology is now available as an eText for a convenient, simple-to-use mobile reading experience for the needs and habits of today's students. The new edition is thoroughly updated with numerous new topics and illustrations relevant to all aspects of manufacturing and includes a completely revised chapter covering the rapid advances in additive manufacturing. For courses in manufacturing process. Pearson eText is a simple-to-use, mobile-optimized, personalized reading experience. It lets students add bookmarks, highlight, and take notes all in one place, even when offline. Seamlessly integrated videos engage students and give them access to the help they need, when they need it. Educators can easily schedule readings and share their own notes with students so they see the connection between their eText and what they learn in class - motivating them to keep reading, and keep learning. And, reading analytics offer insight into how students use the eText, helping educators tailor their instruction. NOTE: This ISBN is for the Pearson eText access card. For students purchasing this product from an online retailer, Pearson eText is a fully digital delivery of Pearson content and should only be purchased when required by your instructor. In addition to your purchase, you will need a course invite link, provided by your instructor, to register for and use Pearson eText.
Download or read book Advances in Sensors Reviews Vol 3 written by Sergey Yurish and published by Lulu.com. This book was released on 2016-04-25 with total page 406 pages. Available in PDF, EPUB and Kindle. Book excerpt: Sensors, Transducers, Signal Conditioning and Wireless (Book Series 'Advances in Sensors: Reviews', Vol. 3) is a premier sensor review source and contains 19 chapters with sensor related state-of-the-art reviews and descriptions of latest achievements written by 55 authors from academia and industry from 19 countries: Botswana, Canada, China, Finland, France, Germany, India, Jordan, Mexico, Portugal, Romania, Russia, Senegal, Serbia, South Africa, South Korea, UK, Ukraine and USA. Coverage includes current developments in physical sensors and transducers, chemical sensors, biosensors, sensing materials, signal conditioning energy harvesters and wireless sensor networks. This book ensures that readers will stay at the cutting edge of the field and get the right and effective start point and road map for the further researches and developments.
Download or read book Artificial Intelligence in Production Engineering and Management written by Carolina Machado and published by Woodhead Publishing. This book was released on 2024-07-02 with total page 251 pages. Available in PDF, EPUB and Kindle. Book excerpt: Artificial intelligence (AI) plays a crucial role in production engineering and management, revolutionizing operation optimization, data analysis, forecasting, and task automation. In production engineering, AI contributes to operational efficiency by identifying patterns, predicting failures, and optimizing supply chains. In management, it offers predictive and prescriptive insights, allowing quick adaptations to changes in market conditions. However, it is essential to address ethical challenges, such as data security and workforce impacts, to ensure responsible and sustainable implementation of AI in these contexts.Among the different topics covered in Artificial Intelligence in Production Engineering and Management, the reader can find: living in the age of AI; machine learning and large language models; AI and people management; nudging financial behavior with AI; the European Union narrative on AI; multidimensional transhuman influence; and AI, emotional intelligence, and ethics. This topical book will be of great value for those working and researching in the production engineering and management fields who are seeking to understand and capitalize on the revolutionary shift that artificial intelligence brings to modern engineering and management. - Combines research in AI from the fields of production engineering and management to provide effective solutions to problems with interdisciplinary relevance - Offers a comprehensive view of the possibilities that artificial intelligence brings to production engineering and management - Inspires reflection, innovation, and a renewed appreciation for the ability of technology to redefine, improve, and transform the foundations of production engineering and management
Download or read book Handbook of Force Transducers written by Dan Mihai Ştefănescu and published by Springer Nature. This book was released on 2020-01-27 with total page 257 pages. Available in PDF, EPUB and Kindle. Book excerpt: Part I introduces the basic “Principles and Methods of Force Measurement” according to a classification into a dozen of force transducerstypes: resistive, inductive, capacitive, piezoelectric, electromagnetic, electrodynamic, magnetoelastic, galvanomagnetic (Hall-effect), vibrating wires, (micro)resonators, acoustic and gyroscopic. Two special chapters refer to force balance techniques and to combined methods in force measurement. Part II discusses the “(Strain Gauge) Force Transducers Components”, evolving from the classical force transducer to the digital / intelligent one, with the incorporation of three subsystems (sensors, electromechanics and informatics). The elastic element (EE) is the “heart” of the force transducer and basically determines its performance. A 12-type elastic element classification is proposed (stretched / compressed column or tube, bending beam, bending and/or torsion shaft, middle bent bar with fixed ends, shear beam, bending ring, yoke or frame, diaphragm, axial-stressed torus, axisymmetrical and voluminous EE), with emphasis on the optimum place of the strain gauges. The main properties of the associated Wheatstone bridge, best suited for the parametrical transducers, are examined, together with the appropriate electronic circuits for SGFTs. The handbook fills a gap in the field of Force Measurement, both experts and newcomers, no matter of their particular interest, finding a lot of useful and valuable subjects in the area of Force Transducers; in fact, it is the first specialized monograph in this inter- and multidisciplinary field.
Download or read book Air Bearings written by Farid Al-Bender and published by John Wiley & Sons. This book was released on 2021-01-15 with total page 592 pages. Available in PDF, EPUB and Kindle. Book excerpt: Comprehensive treatise on gas bearing theory, design and application This book treats the fundamental aspects of gas bearings of different configurations (thrust, radial, circular, conical) and operating principles (externally pressurized, self-acting, hybrid, squeeze), guiding the reader throughout the design process from theoretical modelling, design parameters, numerical formulation, through experimental characterisation and practical design and fabrication. The book devotes a substantial part to the dynamic stability issues (pneumatic hammering, sub-synchronous whirling, active dynamic compensation and control), treating them comprehensively from theoretical and experimental points of view. Key features: Systematic and thorough treatment of the topic. Summarizes relevant previous knowledge with extensive references. Includes numerical modelling and solutions useful for practical application. Thorough treatment of the gas-film dynamics problem including active control. Discusses high-speed bearings and applications. Air Bearings: Theory, Design and Applications is a useful reference for academics, researchers, instructors, and design engineers. The contents will help readers to formulate a gas-bearing problem correctly, set up the basic equations, solve them establishing the static and dynamic characteristics, utilise these to examine the scope of the design space of a given problem, and evaluate practical issues, be they in design, construction or testing.
Download or read book Manufacturing Processes written by Serope Kalpakjian and published by . This book was released on 1984-01-01 with total page 800 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Mechanical Processing of Materials written by Serope Kalpakjian and published by . This book was released on 1967 with total page 376 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Generative Adversarial Networks for Image to Image Translation written by Arun Solanki and published by Academic Press. This book was released on 2021-06-22 with total page 446 pages. Available in PDF, EPUB and Kindle. Book excerpt: Generative Adversarial Networks (GAN) have started a revolution in Deep Learning, and today GAN is one of the most researched topics in Artificial Intelligence. Generative Adversarial Networks for Image-to-Image Translation provides a comprehensive overview of the GAN (Generative Adversarial Network) concept starting from the original GAN network to various GAN-based systems such as Deep Convolutional GANs (DCGANs), Conditional GANs (cGANs), StackGAN, Wasserstein GANs (WGAN), cyclical GANs, and many more. The book also provides readers with detailed real-world applications and common projects built using the GAN system with respective Python code. A typical GAN system consists of two neural networks, i.e., generator and discriminator. Both of these networks contest with each other, similar to game theory. The generator is responsible for generating quality images that should resemble ground truth, and the discriminator is accountable for identifying whether the generated image is a real image or a fake image generated by the generator. Being one of the unsupervised learning-based architectures, GAN is a preferred method in cases where labeled data is not available. GAN can generate high-quality images, images of human faces developed from several sketches, convert images from one domain to another, enhance images, combine an image with the style of another image, change the appearance of a human face image to show the effects in the progression of aging, generate images from text, and many more applications. GAN is helpful in generating output very close to the output generated by humans in a fraction of second, and it can efficiently produce high-quality music, speech, and images. - Introduces the concept of Generative Adversarial Networks (GAN), including the basics of Generative Modelling, Deep Learning, Autoencoders, and advanced topics in GAN - Demonstrates GANs for a wide variety of applications, including image generation, Big Data and data analytics, cloud computing, digital transformation, E-Commerce, and Artistic Neural Networks - Includes a wide variety of biomedical and scientific applications, including unsupervised learning, natural language processing, pattern recognition, image and video processing, and disease diagnosis - Provides a robust set of methods that will help readers to appropriately and judiciously use the suitable GANs for their applications
Download or read book Flow Induced Vibration Handbook for Nuclear and Process Equipment written by Michel J. Pettigrew and published by John Wiley & Sons. This book was released on 2021-12-09 with total page 498 pages. Available in PDF, EPUB and Kindle. Book excerpt: Explains the mechanisms governing flow-induced vibrations and helps engineers prevent fatigue and fretting-wear damage at the design stage Fatigue or fretting-wear damage in process and plant equipment caused by flow-induced vibration can lead to operational disruptions, lost production, and expensive repairs. Mechanical engineers can help prevent or mitigate these problems during the design phase of high capital cost plants such as nuclear power stations and petroleum refineries by performing thorough flow-induced vibration analysis. Accordingly, it is critical for mechanical engineers to have a firm understanding of the dynamic parameters and the vibration excitation mechanisms that govern flow-induced vibration. Flow-Induced Vibration Handbook for Nuclear and Process Equipment provides the knowledge required to prevent failures due to flow-induced vibration at the design stage. The product of more than 40 years of research and development at the Canadian Nuclear Laboratories, this authoritative reference covers all relevant aspects of flow-induced vibration technology, including vibration failures, flow velocity analysis, vibration excitation mechanisms, fluidelastic instability, periodic wake shedding, acoustic resonance, random turbulence, damping mechanisms, and fretting-wear predictions. Each in-depth chapter contains the latest available lab data, a parametric analysis, design guidelines, sample calculations, and a brief review of modelling and theoretical considerations. Written by a group of leading experts in the field, this comprehensive single-volume resource: Helps readers understand and apply techniques for preventing fatigue and fretting-wear damage due to flow-induced vibration at the design stage Covers components including nuclear reactor internals, nuclear fuels, piping systems, and various types of heat exchangers Features examples of vibration-related failures caused by fatigue or fretting-wear in nuclear and process equipment Includes a detailed overview of state-of-the-art flow-induced vibration technology with an emphasis on two-phase flow-induced vibration Covering all relevant aspects of flow-induced vibration technology, Flow-Induced Vibration Handbook for Nuclear and Process Equipment is required reading for professional mechanical engineers and researchers working in the nuclear, petrochemical, aerospace, and process industries, as well as graduate students in mechanical engineering courses on flow-induced vibration.
Download or read book Proceedings of International Conference on Advances in Tribology and Engineering Systems written by Himanshu C. Patel and published by Springer Science & Business Media. This book was released on 2013-10-17 with total page 490 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book contains advanced-level research material in the area of lubrication theory and related aspects, presented by eminent researchers during the International Conference on Advances in Tribology and Engineering Systems (ICATES 2013) held at Gujarat Technological University, Ahmedabad, India during October 15–17, 2013. The material in this book represents the advanced field of tribology and reflects the work of many eminent researchers from both India and abroad. The treatment of the presentations is the result of the contributions of several professionals working in the industry and academia. This book will be useful for students, researchers, academicians, and professionals working in the area of tribology, in general, and bearing performance characteristics, in particular, especially from the point-of-view of design. This book will also appeal to researchers and professionals working in fluid-film lubrication and other practical applications of tribology. A wide range of topics has been included despite space and time constraints. Basic concepts and fundamentals techniques have been emphasized upon, while also including highly specialized topics and methods (such as nanotribology, bio-nanotribology). Care has been taken to generate interest for a wide range of readers, considering the interdisciplinary nature of the subject.
Download or read book Emerging Research in Electronics Computer Science and Technology written by V. Sridhar and published by Springer. This book was released on 2019-04-24 with total page 1482 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book presents the proceedings of the International Conference on Emerging Research in Electronics, Computer Science and Technology (ICERECT) organized by PES College of Engineering in Mandya. Featuring cutting-edge, peer-reviewed articles from the field of electronics, computer science and technology, it is a valuable resource for members of the scientific research community.
