Download or read book Manufacture of Value Added Products from Rice Husk Hull and Rice Husk Ash RHA 2nd Revised Edition written by NPCS Board of Consultants & Engineers and published by NIIR PROJECT CONSULTANCY SERVICES. This book was released on 2018-09-06 with total page 212 pages. Available in PDF, EPUB and Kindle. Book excerpt: Manufacture of Value Added Products from Rice Husk (Hull) and Rice Husk Ash (RHA) (Precipitated Silica, Activated Carbon, Cement, Electricity, Ethanol, Hardboard, Oxalic Acid, Paper, Particle Board, Rice Husk Briquettes, Rice Husk Pellet, Silicon, Sodium Silicate Projects) Rice husk is the outermost layer of protection encasing a rice grain. Rice husk was largely considered a waste product that was often burned or dumped on landfills. Many ways are being thought for disposal of rice husk and only a small quantity of rice husk is used in agricultural field as a fertilizer, or as bedding and for stabilisation of soils. Therefore, the use of rice husk as rice husk ash is one of the most viable solution. The husk can be used for poultry farming, composting or burning. In the case of burning, it has been used as biomass to power reactors to generate thermal or electrical energy. India is a major rice producing country and the husk generated during milling is mostly used as a fuel in the boilers for processing paddy, producing energy through direct combustion and / or by gasification. The rice husk ash causes more environmental pollution and its disposal becomes a problem, hence requires attention regarding its disposal and its reuse. The ash is mainly composed of carbon and silica due to which it is used to manufacture different value added products. This book provides thorough information to utilize RHA with process pathway for economically valuable products. This handbook explains manufacturing process with flow diagrams of various value added products from rice husk & rice husk ash, photographs of plant & machinery with supplier’s contact details and sample plant layout & process flow sheets. The major contents of the book are rice husk, rice husk ash RHA), precipitated silica from rice husk ash, activated carbon from rice husk, cement from rice husk ash, electricity from rice husk, ethanol from rice husk, hardboard from rice husk, oxalic acid from rice husk, paper from rice husk, particle board from rice husk, rice husk briquettes, rice husk pellet, silicon from rice husk, sodium silicate from rice husk, packaging. This book will be a mile stone for the entrepreneurs, existing units, professionals, libraries and others interested in recovery of value added products from rice husk (rice hull) & rice husk ash to explore an economic way for recycle and reuse of agricultural waste. TAGS How to Manufacture Rice Husk based Products, Forming Products from Rice Husk, Rice Husk Ash Fuel & Powder Value Added Products, Rice Husk based Products, How to Produce Rice Husk based Products, Rice Husk (Hull), Rice Husk as a by-Product, How to Earn Money from Rice Husk Ash, Profitable Project Investment Opportunity in by-Product from Rice Husk Ash Rice Husk (Hull), Value Added Products From Rice Husk or Rice Hull Ash, Rice Husk Products, Rice Husk Product Production, Making of Rice Husk in India, Rice Husk Ash, Rice husk as a by-product, Rice Husk ash fuel, Use of Rice Husk Ash, Manufacturing of Rice Husk Ash, Study on properties of rice husk ash and its use, Projects on Rice Husk, Rice Hull, Rice Husk Ash, Properties and Industrial Applications of Rice husk, Rice Husk Production, Manufacturing of Products form rice hull, Potential of Rice Husk, Utilization of Rice Husk and their Ash in Product Manufacturing, Projects on Rice Husk, Projects on Rice Hull, Investment Opportunities in Manufacturing of Rice Husk, How to make Rice Husk Ash, Rice Husk Ash Production Process, RHA, Rice Husk Grinding, Rice Husk Granulation, Energy From Rice Husk, Projects on Rice Husk Products, Rice Husk and Powder, Rice Husk Production, Process of Manufacture of Products from Rice Husk Ash and Rice Hull, How to Make Rice Husk, Rice Husk Ash Making, Forming Products from Rice Hull

Download or read book The Complete Book on Ginger Cultivation and Manufacture of Value Added Ginger Products Ginger Storage Ginger Oil Ginger Powder Ginger Paste Ginger Beer Instant Ginger Powder Drink and Dry Ginger from Green Ginger written by NPCS Board of Consultants & Engineers and published by NIIR PROJECT CONSULTANCY SERVICES. This book was released on with total page 352 pages. Available in PDF, EPUB and Kindle. Book excerpt: Ginger is the common name for Zingiber officinale, which was originally cultivated in China and now equally spread around the world. Ginger is a herb but is often known as a spice, with a strong distinct flavor that can increase the production of saliva. The part that is used as spice on the plant itself is the rhizomes or ginger root. This ginger root is traditionally used with sweet foods in Western cuisine being included in popular recipes such as ginger ale, gingerbread, ginger biscuits and ginger cake. It is also used in many countries as a medicinal ingredient which many believe in. Historically, ginger has a long tradition of being very effective in alleviating symptoms of gastrointestinal distress. In herbal medicine, ginger is regarded as an excellent carminative and intestinal spasmolytic. Modern scientific research has revealed that ginger possesses numerous therapeutic properties including antioxidant effects, an ability to inhibit the formation of inflammatory compounds, and direct anti-inflammatory effects. India is the leading producer of ginger oil and dominates the ginger oil market with almost half shares out of total market. China is also known for ginger production and trade of ginger oil. Asia Pacific mainly exports ginger oil to North America and European markets. Increasing number of health conscious consumers, and their demands for natural oils and extracts based products is the major factor driving growth for essential oils and in turn ginger oil market. Ginger is majorly used in spices and thus ginger oils and oleoresins are preferred to prepared dried spices as flavoring in food industry, because they are more stable, contamination free, cleaner and can be easily standardized by blending. Thus the growth of food industry and spices demand are another factors driving growth of ginger oil market. The growth of natural personal care products industry is another growth driver for ginger oil market. The major content of the book are Ginger Cultivation, Farm and Forestry Production for Ginger, Diseases & Pest Management in Ginger, Medicinal Values of Ginger, Active Ingredients of Ginger, Pharmacological Activity of Ginger, Ginger Storage, Ginger Processing, Ginger Oleoresin, Ginger Oil, Ginger Beer, Ginger Powder, Ginger Paste, Instant Ginger Powder Drink, Ginger Candy, Dry Ginger from Green Ginger, Extraction of Ginger Oleoresin from Ginger-Root Using Co2,Production of Ginger Rhizome by Shoot-Tip Culture, Extraction of Essential Oils from Ginger Rhizome Using Steam Distillation Method, Packaging and Labelling BIS Specifications, Good Manufacturing Practices, Sample Plant Layouts, Photoraphs of Machinery with Suppliers Contact Details. This book will be a mile stone for its readers who are new to this sector, will also find useful for professionals, entrepreneurs, those studying and researching in this important area.

Download or read book Surfactants Disinfectants Cleaners Toiletries Personal Care Products Manufacturing and Formulations 2nd Revised Edition written by NPCS Board of Consultants & Engineers and published by NIIR PROJECT CONSULTANCY SERVICES. This book was released on 2018-05-17 with total page 552 pages. Available in PDF, EPUB and Kindle. Book excerpt: Surfactants, Disinfectants, Cleaners, Toiletries, Personal Care Products Manufacturing and Formulations (Phenyl, Naphthalene Ball, Mosquito Coil, Floor Cleaner, Glass Cleaner, Toilet Cleaner, Utensil Cleaning Bar, Liquid Detergent, Detergent Powder, Detergent Soap, Liquid Soap, Handwash, Hand Sanitizer, Herbal Shampoo, Henna Based Hair Dye, Herbal Cream, Shaving Cream, Air Freshener, Shoe Polish, Tooth Paste) (2nd Revised Edition) The term surfactant comes from the words surface active agent. A surfactant is briefly defined as a material that can greatly reduce the surface tension of water when used in very low concentrations. These are one of many different compounds that make up a detergent. They are added to remove dirt from skin, clothes and household articles particularly in kitchens and bathrooms. They are also used extensively in industry. A disinfectant or agent that frees from infection is ordinarily a chemical agent which kills disease germs or other harmful microorganisms and is applied to inanimate objects. The specific way in which a disinfectant agent is used is dependent on both the desired objective and the infectious agent present. Growing emphasis on health, safety and sanitation is fuelling demand for disinfectants & surfactants across industries such as food processing, healthcare and consumer. Personal care industry in India is very huge and is one of the main key drivers for Indian surfactants market. Surfactants industry has a large market for consumer products. This handbook contains processes formulae of various products and providing information regarding manufacturing method. It covers raw material suppliers, photographs of plant & Machinery with supplier’s contact details and some plant layout & process flow sheets. The Major Contents of the book are phenyl, floor cleaner, glass cleaner, toilet cleaner, mosquito coils, liquid detergent, detergent powder, detergent soap, naphthalene balls, air freshener, shoe polish, tooth paste, shaving cream, liquid soaps and handwashes, herbal shampoo, heena based hair dye, herbal creams, utensil cleaning bar, hand sanitizer etc. It will be a standard reference book for professionals, entrepreneurs,those studying and researching in this important area and others interested in the field of surfactants, disinfectants, cleaners, toiletries, personal care products manufacturing.

Download or read book Phenolic Resins Technology Handbook 2nd Revised Edition written by NPCS Board of Consultants & Engineers and published by NIIR PROJECT CONSULTANCY SERVICES. This book was released on 2019-03-03 with total page 624 pages. Available in PDF, EPUB and Kindle. Book excerpt: Phenolic resins, also known as phenol–formaldehyde resins, are synthetic polymers that are produced from the reaction of phenol or substituted phenol with formaldehyde at high temperatures. These are widely used in wood adhesives, molding compounds, and laminates. The resins are flame-retardant, demonstrate high heat resistance, high tensile strength, and low toxicity, and generate low smoke. In the report, the phenolic resins market is segmented on the basis of product type, application, and region. Phenolic Resin Market size estimated to reach at USD 19.13 billion in 2026. Alongside, the market is anticipated to grow at a CAGR of 5.4% during the forecast period. The global phenolic resins market has experienced a notable growth and it has been projected that the global market will see stable growth during the forecast period. The high mechanical strengths, low toxicity, heat resistance, low smoke and other several properties has made the phenolic resins to make their use in the applications such as in laminations, wood adhesives, molding compound, construction, automobile and others. Growing demand of these applications has increased the production of phenolic resins to meet the current market demand. Also, phenolic resins is used in flame retardant which is very crucial for automobiles and aircrafts. This book basically deals with general reaction of phenols with aldehydes, the resoles, curing stages of resoles, kinetics of a stage reaction, chemistry of curing reactions, kinetics of the curing reaction, the novolacs, decomposition products of resites, acid cured resites, composition of technical resites, mechanisms of rubber vulcanization with phenolic resins, thermosetting alloy adhesives, vinyl phenolic structural adhesives, nitrile phenolic structural adhesives, phenolic resins in contact adhesives, chloroprene phenolic contact adhesives, nitrile phenolic contact adhesives, phenolic resins in pressure sensitive adhesives, rubber reinforcing resins, resorcinol formaldehyde latex systems, phenolic resin chemistry, bio-based phenolic resins, flexibilization of phenolic resins, floral foam (Phenolic Foam) with resin manufacturing, lignin-based phenol formaldehyde (LPF) resins, phenol formaldehyde resin, alkaline phenol formaldehyde resin, furfuryl alcohol phenol urea formaldehyde resin, phenol formaldehyde resin (Shell Sand Resin), phenol formaldehyde resin (Cold Box Resin), effluent treatment plant, standards and legislation, marketing of thermoset resins, process flow sheet, sample plant layout and photographs of machinery with supplier’s contact details. A total guide of phenolic resins and entrepreneurial success in one of today's most lucrative resin industry. This book is one-stop guide to one of the fastest growing sectors, where opportunities abound for manufacturers, retailers, and entrepreneurs. This is the only complete handbook on Phenolic resins.

Download or read book Soaps Detergents and Disinfectants Technology Handbook 2nd Revised edition Washing Soap Laundry Soap Handmade Soap Detergent Soap Liquid Soap Hand Wash Liquid Detergent Detergent Powder Bar Phenyl Floor Cleaner Toilet Cleaner Mosquito Coils Naphthalene Balls Air Freshener Hand Sanitizer and Aerosols Insecticide written by NPCS Board of Consultants & Engineers and published by NIIR PROJECT CONSULTANCY SERVICES. This book was released on 2019-01-01 with total page 464 pages. Available in PDF, EPUB and Kindle. Book excerpt: Soaps are cleaning agents that are usually made by reacting alkali (e.g., sodium hydroxide) with naturally occurring fat or fatty acids. A soap is a salt of a compound known as a fatty acid. A soap molecule consists of a long hydrocarbon chain (composed of carbons and hydrogens) with a carboxylic acid group on one end which is ionic bonded to a metalion, usually a sodium or potassium. The hydrocarbon end is nonpolar and is soluble in nonpolar substances (such as fats and oils), and the ionic end (the salt of a carboxylic acid) is soluble in water. Soap is made by combining tallow (or other hard animal fat) or vegetable or fish oil with an alkaline solution. The two most important alkalis in use are caustic soda and caustic potash. A detergent is an effective cleaning product because it contains one or more surfactants. Because of their chemical makeup, the surfactants used in detergents can be engineered to perform well under a variety of conditions. Such surfactants are less sensitive than soap to the hardness minerals in water and most will not form a film. Disinfectants are chemical agents applied to non-living objects in order to destroy bacteria, viruses, fungi, mold or mildews living on the objects. Disinfectants are chemical substances used to destroy viruses and microbes (germs), such as bacteria and fungi, as opposed to an antiseptic which can prevent the growth and reproduction of various microorganisms, but does not destroy them. The ideal disinfectant would offer complete sterilization, without harming other forms of life, be inexpensive, and non-corrosive. The global soap and detergent market is expected to reach USD 207.56 billion by 2025. The industrial soaps & detergents are extensively used by the commercial laundries, hotels, restaurants, and healthcare providers. Increasing demand from healthcare and food industries will continue to drive the market. Aerosol and liquid products are the common disinfectants used in hospitals, although growing number of healthcare facilities are implementing ultraviolet disinfection systems as further measure. Increasing demand for disinfectants from water treatment and healthcare industries is fuelling growth of the global disinfectants market. The major contents of the book are Liquid Soaps and Hand Wash, Liquid Soap and Detergents, Washing Soap: Laundry Soap Formulation, Antiseptic and Germicidal Liquid Soap, Manufacturing Process And Formulations Of Various Soaps, Handmade Soap, Detergent Soap, Liquid Detergent, Detergent Powder, Application and Formulae Of Detergents, Detergent Bar, Detergents Of Various Types, Formulating Liquid Detergents, Phenyl, Floor Cleaner, Toilet Cleaner, Mosquito Coils, Naphthalene Balls, Air Freshener (Odonil Type), Liquid Hand Wash and Soaps, Hand Sanitizer, Aerosols–Water and Oil Based Insecticide (Flies, Mosquitoes Insect and Cockroach Killer Spray), Ecomark Criteria for Soaps & Detergents, Plant Layout, Process Flow Chart and Diagram, Raw Material Suppliers List and Photographs of Machinery with Supplier’s Contact Details. This book will be a mile stone for its readers who are new to this sector, will also find useful for professionals, entrepreneurs, those studying and researching in this important area.

Download or read book Modern Technology of Synthetic Resins Their Applications 2nd Revised Edition written by NIIR Board and published by ASIA PACIFIC BUSINESS PRESS Inc.. This book was released on 2018-04-20 with total page 592 pages. Available in PDF, EPUB and Kindle. Book excerpt: Synthetic resin is typically manufactured using a chemical polymerization process. This process then results in the creation of polymers that are more stable and homogeneous than naturally occurring resin. Since they are more stable and are cheaper, various forms of synthetic resin are used in a variety of products such as plastics, paints, varnishes, and textiles. There are various kinds of synthetic resins; acetal resins, amino resins, casein resins, epoxy resins, hydrocarbon resins, polyamide resins, etc. The classic variety is epoxy resin, manufactured through polymerization, used as a thermoset polymer for adhesives and composites. Epoxy resin is two times stronger than concrete, seamless and waterproof. Polyamide resin is another example of synthetic resins. Polyamide resins are products of polymerization of an amino acid or the condensation of a diamine with a dicarboxylic acid. They are used for fibers, bristles, bearings, gears, molded objects, coatings, and adhesives. The term nylon formerly referred specifically to synthetic polyamides as a class. Because of many applications in mechanical engineering, nylons are considered engineering plastics. Resins are valued for their chemical properties and associated uses, such as the production of varnishes, adhesives, lacquers, paints, rubber and pharmaceutical uses. The applications of synthetic resins are seen in some important industries like paint industry, adhesive industry, the printing ink industry, the textile industry, the leather industry, the floor polish, paper, agricultural industry etc. As it can be seen that there is an enormous scope of application of resins hence it is one of the major field to venture. Synthetic Resins are materials with properties similar to natural plant resins. They are viscous liquids capable of hardening permanently. Chemically they are very different from resinous compounds secreted by plants. Synthetic resins are of several classes. The growth of the synthetic resins market can be attributed to the high demand from the packaging sector due to favorable properties, including lightweight and ability to act as an excellent barrier, which allows for their usage in applications such as barrier packaging, shrink wraps, and pharmaceutical packaging. The major contents of the book are properties, manufacturing process, formulae of synthetic resins and applications of synthetic resins, derivatives of resins, use of resins in polymer field, alkyd resin technology, epoxy resins, manufacture of polystyrene based ion-exchange, phenol formaldehyde reactions, polycarbonates resins, polyester coating compositions, synthetic rubbers, modification with synthetic resins, water-soluble polymers, cross-linking of water-soluble coatings etc. This book also contains the list of manufacturers and dealers of raw materials, list of Chemical Plant, Photographs of Machinery with Suppliers Contact Details, Sample Plant Layout and Process Flow Chart. The book will be very useful for new entrepreneurs, manufacturers of synthetic resins who can easily extract the relevant formulation and manufacturing process from the book. TAGS Alkyl and hydroxy alkyl alkylcellulose, Applications of Synthetic Resins, Best small and cottage scale industries, Business Plan for a Startup Business, Business start-up, Emulsion polymers manufacture, Formulation of Synthetic Resins, Formulation of Resins, Great Opportunity for Startup, How to Manufacture Synthetic Resins, How to start a successful synthetic resin business, How to start a synthetic resin production Business, How to start a synthetic resin production?, How to Start Emulsions of Synthetic Resin Business, How to start synthetic resin production Industry in India, Indene-coumarone resins, Manufacturing process of Acrylonitrile Resins, Manufacturing process of Actel Resins, Manufacturing process of Alkyd Resin, Manufacturing process of Amino Resins, Manufacturing process of Casein Resins, Manufacturing process of Epoxy Resins, Manufacturing process of Ion-exchange Resins, Manufacturing process of Phenolic resins, Manufacturing process of Polyamide Resins, Manufacturing process of Polycarbonates Resins, Manufacturing process of Polyesters, Manufacturing process of Polyurethane resins, Manufacturing process of Polyvinyl Acetate Solid Resins, Manufacturing process of Silicone resins, Modern small and cottage scale industries, Most Profitable Synthetic resin Business Ideas, New small scale ideas in synthetic resin production industry, Process of making synthetic resin adhesive, Processing of synthetic resin, Production of a synthetic resin, Profitable small and cottage scale industries, Profitable Small Scale synthetic resin Manufacturing, Project for startups, Resin Types and Production, Rosin & rosin derivatives, Rubber resins Formulation, Setting up and opening your synthetic resin Business, Shellac resins, Small scale Commercial synthetic resin making, Small Scale Synthetic resin manufacturing Projects, Small scale synthetic resin production line, Small Start-up Business Project, Start Up India, Stand up India, Starting a synthetic resin production Business, Start-up Business Plan for synthetic resin production, Startup ideas, Startup Project, Startup Project for synthetic resin production, Startup project plan, Sucrose resins, Synthetic resin Based Profitable Projects, Synthetic resin Based Small Scale Industries Projects, Synthetic Resin Business, Synthetic resin Making Small Business Manufacturing, Synthetic Resin Manufacturing, Synthetic resin manufacturing Industry in India, Synthetic resin manufacturing process, Synthetic resin manufacturing Projects, Synthetic resin method, Synthetic resin production, Synthetic resin production Business, Synthetic Resin Technology with formulation, Synthetic resin uses, Synthetic Resins, Synthetic Resins - Resin Chemical, Synthetic Resins and Polymer Emulsion, Synthetic Resins Technology book, Technological advances in the manufacture of resins, Technology of Synthetic Resins, Terpene resins, Types and applications of synthetic resin, Uses of rosin in the polymer fiel, Water-reducible resins

Download or read book The Complete Book on Glass and Ceramics Technology 2nd Revised Edition written by NIIR Board of Consultants & Engineers and published by ASIA PACIFIC BUSINESS PRESS Inc.. This book was released on 2017-04-09 with total page 624 pages. Available in PDF, EPUB and Kindle. Book excerpt: Ceramics also known as fire clay is an inorganic, non-metallic solid article, which is produced by the art or technique of heat and subsequent cooling. The ceramics industry in India came into existence about a century ago and has matured over time to form an industrial base. From traditional pottery making, the industry has evolved to find its place in the market for sophisticated insulators, electronic and electrical items. The ceramic industry has been modernizing continuously, by newer innovations in product design, quality etc. Glass is an inorganic product typically produced by melting a mixture of silica, soda and calcium compound with desired metallic oxides that serves as coloring agents. Indian glass industry will increase on the sidelines of real estate growth across retail, residential and office estate. Glass production involves the fusion of several inorganic substances. These various substances include products such as silica sand, soda ash, dolomite and limestone, representing together 99% of all the raw materials, excluding recycled glass. Glass-ceramics are mostly produced in two steps: First, a glass is formed by a glass-manufacturing process. The glass is cooled down and is then reheated in a second step. In this heat treatment the glass partly crystallizes. In most cases nucleation agents are added to the base composition of the glass-ceramic. These nucleation agents aid and control the crystallization process. Glass-ceramics are fine-grained polycrystalline materials formed when glasses of suitable compositions are heat treated and thus undergo controlled crystallization to the lower energy, crystalline state. It is important to emphasize a number of points in this statement on glass ceramics.Glass ceramics has helped the electronics industry build much smaller and highly efficient transistors, leading to advances in all types of devices. The book covers almost all important aspects of Glass and Ceramic Industry: Properties, Applications, Manufacturing, Processing and Photographs of Plant &Machinery with Supplier’s Contact Details. The major contents of the book are types of glasses, silicate glasses, boric oxide and borate glasses, phosphorus pentoxide and phosphate glasses, germanium dioxide and germanate glasses, titanate glasses, nitrate glasses, glasses based on water, halide glasses, modern glass working, monax and pyrex glass, electric welding, photo electric cells, glassy metals, analysis of glass, glass ceramics, ceramics as electrical materials, analysis of ceramics etc. The book will be useful to the consultants, technocrats, research scholars, libraries and existing units and new entrepreneurswho will find a good base to work further in this field.

Download or read book Manufacture of Pan Masala Tobacco and Tobacco Products Tobacco Cultivation Chewing Tobacco Cigarettes Bidi Cigars Khaini Zarda Gutka Katha Mouth Freshner Pan Chatni Kimam Sweet Supari Nicotine Sulphate USP Nicotine Nicotine Tartarate Nicotine Polacrilex Resin written by NPCS Board of Food Technologists and published by NIIR PROJECT CONSULTANCY SERVICES. This book was released on 2019-01-03 with total page 440 pages. Available in PDF, EPUB and Kindle. Book excerpt: Tobacco comes from a leafy plant that tends to grow in warm tropical areas. It is famously grown all over the Caribbean, where the warm, sunny conditions make for a perfect growing climate. Tobacco is usually smoked as a nicotinic stimulant and is mostly processed, rolled and dried before being smoked. Different geographies produce different types of the plant. The taste and flavor of the leaves are the characteristic trademarks of different types. The process of curing also determines the type of tobacco. Tobacco products include cigarettes, cigars, loose pipe tobacco, chewing tobacco, and snuff. These products contain the dried, processed leaves of the tobacco plant nicotiana rustica or nicotiana tabacum. All tobacco contains nicotine, an addictive drug. Today’s tobacco also contains thousands of other chemicals designed to make the products more user-friendly and addictive. Nicotine is a nitrogen-based compound which dissolves in organic compounds. Tobacco leaves contain plenty of nicotine which evaporates on burning. This nitrogen-based compound is addictive in low amounts and toxic in high doses. Nicotine Sulfate is a potent pesticide, known for its high toxicity. A large proportion of Indian economy is agro based in which Tobacco is one of the principal cash crops. The tobacco production and its allied products’ sales in the country have played a prominent role in the development of nation’s economy. India is the largest tobacco market in the world in terms of tobacco consumption. The smokeless tobacco has historically been served as a tradition in India for many decades. Tobacco Waste or dust is generated at various stages of post-harvest processing of tobacco and also while manufacturing various tobacco products mainly during manufacture of tobacco products like cigarette and Beedi. The types of wastes generated during pre and post-harvest practice of tobacco include suckers, stems, mid ribs, leaf waste and dust. The main contents of the book are Tobacco Cultivation, Tobacco Diseases and Pests, Organic Tobacco Production, Chewing Tobacco, Cigarettes, Bidi, Cigars, Readymade Khaini, Chewing Tobacco (Khaini), Zarda, Gutka, Katha, Mouth Fresheners, Pan Chutney, Pan Masala, Kimam, Tobacco of Various Grade, Sweet Supari, Nicotine Sulphate, USP Nicotine, Nicotine Tartarate, Nicotine Polacrilex Resin, Smokeless Tobacco (SLT), Hookah, Tobacco Products Manufacturing Processes, E-Liquid (Main Chemicals, Compounds, Components), Additives in Tobacco Products, Additives Products, Packaging & Labeling (Design Trends & Technologies), Plastics in Food Packaging, Packaging Laws and Regulations and Photographs of Machinery with Supplier’s Contact Details. This book will be a mile stone for its readers who are new to this sector, will also find useful for professionals, entrepreneurs, those studying and researching in this important area.

Download or read book Entrepreneur s Start Up Handbook Manufacturing of Profitable Household FMCG Products with Process Formulations 2nd Revised Edition written by NPCS Board of Consultants & Engineers and published by ASIA PACIFIC BUSINESS PRESS Inc.. This book was released on 2018-03-03 with total page 368 pages. Available in PDF, EPUB and Kindle. Book excerpt: " ‘Startup India, Stand-up India’ “Can India be a ‘Startup Capital’? Can the youth in the states have the opportunities in the form of start-ups, with innovations, whether it be manufacturing, service sector or agriculture? --- Narendra Modi, Prime Minister of India Startup India Stand up Our Prime Minister unveiled a 19-point action plan for start-up enterprises in India. Highlighting the importance of the Standup India Scheme, Hon’ble Prime minister said that the job seeker has to become a job creator. Prime Minister announced that the initiative envisages loans to at least two aspiring entrepreneurs from the Scheduled Castes, Scheduled Tribes, and Women categories. It was also announced that the loan shall be in the ten lakh to one crore rupee range. A startup India hub will be created as a single point of contact for the entire startup ecosystem to enable knowledge exchange and access to funding. Startup India campaign is based on an action plan aimed at promoting bank financing for start-up ventures to boost entrepreneurship and encourage startups with jobs creation. Startup India is a flagship initiative of the Government of India, intended to build a strong ecosystem for nurturing innovation and Startups in the country. This will drive sustainable economic growth and generate large scale employment opportunities. The Government, through this initiative aims to empower Startups to grow through innovation and design. What is Startup India offering to the Entrepreneurs? Stand up India backed up by Department of Financial Services (DFS) intents to bring up Women and SC/ST entrepreneurs. They have planned to support 2.5 lakh borrowers with Bank loans (with at least 2 borrowers in both the category per branch) which can be returned up to seven years. PM announced that “There will be no income tax on startups’ profits for three years” PM plans to reduce the involvement of state government in the startups so that entrepreneurs can enjoy freedom. No tax would be charged on any startup up to three years from the day of its establishment once it has been approved by Incubator. India Government is promoting finance for start-up ventures and providing incentives to further boost entrepreneurship, manufacturing and job creation. The correct choice of business is an extremely essential step in the process of ‘being your own boss’. This handbook contains few formulations of cosmetic products, properties and manufacturing process with flow diagrams of various products. After gathering the above information of products, the decision of choosing an appropriate one will no longer be a cumbersome process. The Fast-Moving Consumer Goods (FMCG) sector, also called the consumer packaged goods (CPG) sector, is one of the largest industries worldwide. FMCGs are generally cheap products that are purchased by consumers on a regular basis. FMCG sector is the fourth largest sector in the economy and creates employment for more than three million people in downstream activities. The FMCG market is estimated to treble from its current figure in the coming decade. Fast Moving Consumer Goods Companies have been expanding rapidly. Most of the product categories like jams, toothpaste, skin care, shampoos, etc, have low per capita consumption as well as low penetration level, but the potential for growth is huge. The industry has developed both in the small scale sector and organized sector. Major contents of the book are banana wafers, biscuits, bread, candy, chocolates, potato chips, rice flakes (poha), corn flakes, baby cereal food, fruit juice, milk powder, paneer, papad, ghee, extruded food (kurkure type), instant noodles, instant tea, jam & jelly, khakhra, soft drinks, spices, sweet scented supari, detergent powder, detergent soap, face freshener tissue, floor cleaner, glass cleaner, henna based hair dye, herbal creams, herbal hair oil, herbal shampoo, incense sticks, lipsticks, liquid detergent, mosquito coils, nail polish, air freshener (odonil type), naphthalene balls, phenyl, shoe polish, tissue paper, toilet cleaner, tooth brush, tooth paste, toothpicks, utensil cleaning bar, packaging. It will be a standard reference book for professionals, entrepreneurs and food technologists.

Download or read book Lubricating Oils Greases and Petroleum Products Manufacturing Handbook written by NPCS Board of Consultants & Engineers and published by NIIR PROJECT CONSULTANCY SERVICES. This book was released on 2018-01-12 with total page 376 pages. Available in PDF, EPUB and Kindle. Book excerpt: Lubricating oils are specially formulated oils that reduce friction between moving parts and help maintain mechanical parts. Lubricating oil is a thick fatty oil used to make the parts of a machine move smoothly. The lubricants market is growing due to the growing automotive industry, increased consumer awareness and government regulations regarding lubricants. Lubricants are used in vehicles to reduce friction, which leads to a longer lifespan and reduced wear and tear on the vehicles. The growth of lubricants usage in the automotive industry is mainly due to an increasing demand for heavy duty vehicles and light passenger vehicles, and an increase in the average lifespan of the vehicles. As saving conventional resources and cutting emissions and energy have become central environmental matters, the lubricants are progressively attracting more consumer awareness. Greases are made by using oil (typically mineral oil) and mixing it with thickeners (such as lithium-based soaps). They may also contain additional lubricating particles, such as graphite, molybdenum disulfide, or polytetrafluoroethylene (PTFE, aka Teflon). White grease is made from inedible hog fat and has a low content of free fatty acids. Yellow grease is made from darker parts of the hog and may include parts used to make white grease. Brown grease contains beef and mutton fats as well as hog fats. Synthetic grease may consist of synthetic oils containing standard soaps or may be a mixture of synthetic thickeners, or bases, in petroleum oils. Silicones are greases in which both the base and the oil are synthetic. Asia-Pacific represents the largest and the fastest growing market, with volume sales projected to grow at a CAGR of 5% over the analysis period. Automotive lubricants represents the largest product market, with engine oils generating a major chunk of the revenues. The market for industrial lubricants is supported by the huge demand for industrial engine oils and growing consumption of process oils. The major content of the book are Food and Technical Grade White Oils and Highly Refined Paraffins, Base Oils from Petroleum, Formulation of Automotive Lubricants, Lubricating Grease, Aviation Lubricants, Formulation and Structure of Lubricating Greases, Marine Lubricants, Industrial Lubricants, Refining of Petroleum, Lubricating Oils, Greases and Solid Lubricants, Refinery Products, Crude Distillation and Photographs of Machinery with Suppliers Contact Details. This book will be a mile stone for its readers who are new to this sector, will also find useful for professionals, entrepreneurs, those studying and researching in this important area.

Download or read book Handbook on Drying Milling and Production of Cereal Foods written by NIIR Board of Consultants & Engineers and published by ASIA PACIFIC BUSINESS PRESS Inc.. This book was released on 2017-10-09 with total page 472 pages. Available in PDF, EPUB and Kindle. Book excerpt: Cereals, or grains, are members of the grass family cultivated primarily for their starchy seeds (technically, dry fruits).Cereal grains are grown in greater quantities and provide more food energy worldwide than any other type of crop; they are therefore staple crops. Oats, barley, and some food products made from cereal grains. They are used for both human and animal food and as an industrial raw material. India produces cereals like wheat, rice, barley (jau), buckwheat, oats, corn (maize), rye, jowar (sorghum), pearl millet (bajra), millet (ragi), Sorghum, Triticale, etc. India is the world's second largest producer of Rice, Wheat and other cereals. The huge demand for cereals in the global market is creating an excellent environment for the export of Indian cereal products. India is not only the largest producer of cereal as well as largest exporter of cereal products in the world. India have been offering incredible opportunities as they have an abundant amount of raw materials and a wide availability of cheap labor. The book provides comprehensive coverage of the Drying, Milling and information regarding production method of Cereal Foods .It also covers Plant Layout, Process Flow Sheets and photographs of plant & Machinery with supplier’s contact details. Some of the fundamentals of the book are origin of wheat classification of wheat, endeavors to find industrial uses for wheat, criteria of wheat quality, botanical criteria of quality, milling principles, extraction rate and its effect on flour composition, grain structure as affecting grinding, definition of flour extraction stone milling: yields of products, roller milling: flour extraction rates, rice production and utilization, origin of rice, comparison of rice with other cereal grains, composition of rice and cereal, breeding rice varieties with specific, industrial uses for rice and rice by products, caryopsis and composition of rice, gross structure of the rice caryopsis and its milling fractions etc. This book is essential for those who are interested in cereal areas can find the complete information from manufacture to final uses of Cereal Foods. The present time is an era of information, one should know about what is happening in the world to be able to compete effectively. It will be very informative and useful to consultants, new entrepreneurs, startups, technocrats, research scholars, libraries and existing units.

Download or read book Wax Polishes Manufacturing Handbook with Process and Formulae Automobile Industrial Leather Furniture Floor Marine Metal and Shoe Polish written by NPCS Board of Consultants & Engineers and published by NIIR PROJECT CONSULTANCY SERVICES. This book was released on 2019-07-04 with total page 384 pages. Available in PDF, EPUB and Kindle. Book excerpt: Polishes typically contain a lot of abrasives, rinsing agents and organic solvents. Protectants typically contain neither abrasives nor rinsing agents, less organic solvents than the two other product types and a lot of protectant. Polishes are used to maintain a glossy finish on surfaces as well as to prolong the useful lives of these surfaces. Polishes can be described in terms of their physical form, carrier system, ability to clean, and durability. Physical forms of polishes include pastes, pre-softened pastes (non-flowing emulsions), liquids, and gels. Polishes beautify and protect by coating or refinishing surfaces. Waxes are used as finishes and coatings for wood products. Waxes are also used in shoe polishes, wood polishes, and automotive polishes, as mold release agents in mold making. Furniture polish value sales are expected to reach US$ 13,101.3 mn by 2027, expanding at a CAGR of 5.0%. Shoe polish protects the shoes from moisture, water, and becoming hard. It provides the shoes with a waxy coating and a shine. Shoe polish market is concentrated in the urban areas. The global shoe polish market is projected to grow at a CAGR of 2.75% over the forecast period of 2019-2025. The global metal polish products market has been registering rapid growth, owing to the use of different metal alloys in machinery, furniture and other metal products due to their cheaper cost and high efficiency. Globally, the metal polish market has been witnessing significant growth, owing to the rise in the demand for cleaning and polishing products. The book contains formulations and manufacturing process of auto polish and wax products, furniture polish, marine polish, metal polish and shoe polish, their marketing strategies, BIS specification, directory section, plant layouts and photographs of machinery with supplier’s contact details. A total guide to manufacturing and entrepreneurial success in one of today's most wax and polish industry. This book is one-stop guide to one of the fastest growing sectors of the wax and polish industry, where opportunities abound for manufacturers, retailers, and entrepreneurs. This is the only complete handbook on the commercial production of wax and polish products. It serves up a feast of how-to information, from concept to purchasing equipment

Download or read book Handbook on Manufacture of Indian Kitchen Spices Masala Powder with Formulations Processes and Machinery Details Chaat Masala Sambar Masala Pav Bhaji Masala Garam Masala Goda Masala Pani Puri Masala Kitchen King Masala Thandai Masala Powder written by NPCS Board of Food Technologists and published by NIIR PROJECT CONSULTANCY SERVICES. This book was released on 2019-04-09 with total page 336 pages. Available in PDF, EPUB and Kindle. Book excerpt: Handbook on Manufacture of Indian Kitchen Spices (Masala Powder) with Formulations, Processes and Machinery Details (Chaat Masala, Sambar Masala, Pav Bhaji Masala, Garam Masala, Goda Masala, Pani Puri Masala, Kitchen King Masala, Thandai Masala Powder, Meat Masala, Rasam Powder, Kesari Milk Masala, Punjabi Chole Masala, Shahi Biryani Masala, Tea Masala Powder, Jaljeera Masala, Tandoori Masala, Fish Curry Masala, Chicken Masala, Pickle Masala, Curry Powder) 3rd Revised Edition Spices or Masala as it is called in Hindi, may be called the “heartbeat” of an Indian kitchen. The secret ingredient that makes Indian food truly Indian is the generous use of signature spices. From ancient times of the maharaja’s, spices have added unforgettable flavours and life to Indian cuisine. Indian spices offer significant health benefits and contribute towards an individual's healthy life. There are a large number of various spices, used along with food such as Chilli (Mirchi), Turmeric (Haldi), Coriander (Dhania), Cumin (Jeera), Mustard (Rai), Fenugreek (Methi), Sesame (Til), Cardamon, Peppercorns (Kali Mirchi), Clove, Fennel (Saunf), Nutmeg and Mace etc. In modern times, international trade in spices and condiments have increased dramatically which could be attributed to several factors including rapid advances in transportation, permitting easy accessibility to world markets, growing demand from industrial food manufacturers of wide ranging convenience foods. As the demand for Indian spices is increasing day by day, Indian manufacturers are producing spices of high quality. The book presents the fundamental concepts of Spices (Masala Powder) Indian Kitchen Spices product mix in a manner that new entrepreneurs can understand easily. It covers Formulation for spices i.e., Chaat Masala, Chana Masala, Sambar Masala, Pav Bhaji Masala, Garam Masala, Goda Masala, Pani Puri Masala, Kitchen King Masala, Thandai Masala Powder, Meat Masala, Rasam Powder, Kesari Milk Masala, Punjabi Chole Masala, Shahi Biryani Masala, Tea Masala Powder, Jaljeera Masala, Tandoori Masala, Fish Curry Masala, Chicken Masala, Pickle Masala, Curry Masala. This book contains manufacturing process, Packaging and Labelling of Spices. The highlighting segments of this book are Spices Nutritional value, Special Qualities and Specifications, Cryogenic Grinding Technology, Food Safety & Quality, BIS Specifications, Quality Control, Market, Sample Production Plant Layout and Photograph of Machinery with Supplier’s Contact Details. It also covers Good manufacturing practices in Food Industry, Case Study for Everest and MDH Masala and Top Spice Brands of India. This book is aimed for those who are interested in Spices business, can find the complete information about Manufacture of Indian Kitchen Spices (Masala Powder). It will be very informative and useful to consultants, new entrepreneurs, startups, technocrats, research scholars, libraries and existing units.

Download or read book Manufacture of Thinners Solvents Properties Uses Production Formulation with Machinery Details written by NPCS Board of Consultants & Engineers and published by NIIR PROJECT CONSULTANCY SERVICES. This book was released on 2017-07-09 with total page 232 pages. Available in PDF, EPUB and Kindle. Book excerpt: Solvents are defined as chemicals compound that are introduced during manufacture of the paint itself and before packaging, in order to maintain all components of the paint in a liquid / viscous state such as we know it. A solvent is usually a liquid but can also be a solid or a gas. Solvents find various applications in chemical, pharmaceutical, oil, and gas industries, including in chemical syntheses and purification processes. Thinners are defined as chemical compounds that are introduced into the paint prior to application, in order to modify the viscosity and other properties related to the rate of curing that may affect the functionality and aesthetics of the final layer painting.Paint thinner, a solvent used in painting and decorating, for thinning oil-based paint and cleaning brushes. A Thinner may be a single solvent or a combination of solvent types. Often, specific thinners are required by the manufacturer of a coating to prevent damage to coating properties that may occur when an inappropriate thinner is used. Solvents (for cleaning up or softening) and Thinners (for diluting or extending) are useful not only in painting but in other areas such as Wooden Furniture industry, Automobile industry, Ink industry, Rubber industry. As the paint industry is a major consumer of Thinners & Solvents, and is expanding at a tremendous speed, it is very obvious that the demand of thinners, too, will increase tremendously. The paints & coatings accounts for the largest share in the aliphatic hydrocarbon Thinners & Solvents market. It is also projected to be the fastest-growing application of the aliphatic hydrocarbon Thinners and Solvents market. The book contains Properties, Uses, manufacturing of Thinners & Solventsand providing information regarding thinner formulation. It also covers raw material suppliers, photographs of plant & Machinery with supplier’s contact details. Some of the fundamentals of the book are thinner in Paint Industry, Health and Safety Measures of Chemicals, Pollution Control, Waste Disposal of Hazardous Chemicals and Storage, Labelling and Packaging of Chemicals etc. It will be a standard reference book for professionals and entrepreneurs. Those who are interested in this field can find the complete information from manufacture to final uses of Solvents and Thinners. It will be very helpful to consultants, new entrepreneurs, technocrats, research scholars, libraries and existing units.

Download or read book Handbook on Printing Technology Offset Flexo Gravure Screen Digital 3D Printing with Book Binding and CTP 4th Revised Edition written by NIIR Board of Consultants & Engineers and published by ASIA PACIFIC BUSINESS PRESS Inc.. This book was released on 2019-03-12 with total page 616 pages. Available in PDF, EPUB and Kindle. Book excerpt: Printing is a process for reproducing text and image, typically with ink on paper using a printing press. It is often carried out as a large-scale industrial process, and is an essential part of publishing and transaction printing. Modern technology is radically changing the way publications are printed, inventoried and distributed. Printing technology market is growing, due to technological proliferation along with increasing applications of commercial printing across end users. In India, the market for printing technology is at its nascent stage; however offers huge growth opportunities in the coming years. The major factors boosting the growth of offset printing press market are the growth of packaging industry across the globe, increasing demand in graphic applications, the wide range of application in various industry, and industrialization. 3D printing market is estimated to garner $8.6 billion in coming years. The global digital printing packaging market is expected to exceed more than US$ 40.02 billion by 2026 at a CAGR of 13.9%. Computer-to-plate systems are increasingly being combined with all digital prepress and printing processes. This book is dedicated to the Printing Industry. In this book, the details of printing methods and applications are given. The book throws light on the materials required for the same and the various processes involved. This popular book has been organized to provide readers with a firmer grasp of how printing technologies are revolutionizing the industry. The major content of the book are principles of contact (impression), principles of noncontact printing, coated grades and commercial printing, tests for gravure printing, tests for letterpress printing, tests for offset printing, screen printing, application of screen printing, offset lithography, planography, materials, tools and equipments, sheetfed offset machines, web offset machines, colour and its reproduction, quality control in printing, flexography, rotogravure, creative frees printer, shaftless spearheads expansion, digital printing, 3D printing, 3D printing machinery, book binding, computer-to-plate (ctp) and photographs of machinery with suppliers contact details. A total guide to manufacturing and entrepreneurial success in one of today's most printing industry. This book is one-stop guide to one of the fastest growing sectors of the printing industry, where opportunities abound for manufacturers, retailers, and entrepreneurs. This is the only complete handbook on the commercial production of printing products. It serves up a feast of how-to information, from concept to purchasing equipment.

Download or read book in Hindi Language Food Processing and Agriculture Based Industries Project Profiles written by Ajay Kr. Gupta and published by NIIR PROJECT CONSULTANCY SERVICES. This book was released on 2019-01-01 with total page 472 pages. Available in PDF, EPUB and Kindle. Book excerpt: खाद्य प्रसंस्करण उद्योग का मतलब खाने की वस्तुओं की प्रोसेसिंग कर उसे नए रूप में पेश करने के कारोबार से है। भारत में लोगों की तेजी से बदलती लाइफ स्टाइल ने खाद्य प्रसंस्कृत उत्पादों की मांग में लगातार बढ़ोतरी की है । ऐसे में कारोबारी इस क्षेत्र में कम निवेश और बेहतर कारोबारी सहायता के जरिए एक नया मुकाम बना सकते हैं, जिसके लिए खाद्य प्रसंस्करण उद्योग मंत्रालय कई सारी योजनाएं चला रहा है। इसके तहत नई इकाई लगाने, मौजूदा इकाई का आधुनिकीकरण करने, तकनीकी सहायता आदि के लिए सहायता मिल रही है। भारत के खाद्य प्रसंस्करण उद्योग क्षेत्र में प्रसंस्कृत खाद्य के उत्पादन और निर्यात की पर्याप्त संभावनाएँ हैं। खाद्य बाजार लगभग 10.1 लाख करोड़ रुपये का है, जिसमें खाद्य प्रसंस्करण उद्योग का हिस्सा 53% अर्थात 5.3 लाख करोड़ रुपये का है। नौकरी के लिए सुबह-शाम की भागमभाग, ट्रैफिक और तमाम तरह की अन्य आपाधापी से भरी दिनचर्या के बीच किसे फुर्सत है कि खाना तसल्ली से रोजाना बनाया और खाया जाये। इसका समाधान इंस्टेंट एवं प्रोसेस्ड अथवा रेडी टू ईट पैक्ड फ़ूड के रूप में देश-विदेश में देखा जा सकता है। पहले खानपान की ऐसी आदतें सिर्फ पश्चिमी देशों तक ही सीमित थीं पर आज भारत जैसे विकासशील देशों में भी बड़े पैमाने पर यह प्रचलन आम होता जा रहा है। इसी बदलाव का नतीजा है कि वैश्विक स्तर पर प्रोसेस्ड फ़ूड इंडस्ट्री का कारोबार निरंतर गति से बढ़ रहा है। भारत में खाद्य प्रसंस्करण कम्पनियों के लिए प्रचुर संभावनाएँ हैं। खाद्य प्रसंस्करण उद्योग के विभिन्न उत्पादों की मांग तेजी से बढ़ रही है। इसका कारण भारत के लोगों की प्रतिव्यक्ति आय में वृद्धि होना है, जिसके फलस्वरूप वे उत्कृष्ट गुणवत्ता वाले खाद्य पदार्थों पर खर्च करने की स्थिति में हैं। भारतीय खाद्य प्रसंस्‍करण उद्योग उत्पादन, खपत, निर्यात और‍ विकास संभावना की दृष्टि से विश्व में सबसे बड़ा उद्योग है। उपभोक्ता की बढ़ती सम्पन्नता ने खाद्य प्रसंस्करण क्षेत्र में विविधिकरण के लिए नए अवसर खोल दिए हैं और विकास के नए मार्ग खोल दिए हैं। प्रसंस्कृत और सुविधाजनक खाद्य की मांग शहरीकरण, जीवन शैली में बदलाव और लोगों की भोजन की आदत में परिवर्ततन के कारण स्थायी रूप से बढ़ रही है। तदनुसार भारतीय उपभोक्ता को नए उच्च गुणवत्ता वाले खाद्य उत्पाद परोसे जा रहे हैं जिसका निर्माण अत्याधुनिक प्रौद्योगिकी का उपयोग करके किया गया है। इस पुस्तक में विभिन्न उद्योगों की जानकारी तथा Cost Estimation (Capacity, Working Capital, Rate of Return, Break Even Point, Cost of Project) को शामिल किया गया है, जैसे: बेकरी उद्योग, रेडी-टू- ईट फूड, बेवरेजेज, खाद्यान्नों की पिसाई यूनिट, खाद्य तेल से संबंधित उद्योग, फल और सब्जी की पैकेजिंग उद्योग, डेयरी, बीयर एवं एल्कोहोलिक पेय पदार्थ, दुग्ध एवं दुग्ध-निर्मित उत्पाद, अनाज प्रसंस्करण, उपभोक्ता खाद्य वस्तुएँ ; अर्थात् कन्फेक्शनरी, चॉकलेट और कोको उत्पाद, सोया-निर्मित उत्पाद, पानी बोतल प्लांट, उच्च प्रोटीनयुक्त खाद्य पदार्थ, सॉफ्ट ड्रिंक, खाने और पकाने के लिए तैयार उत्पाद, नमकीन, स्नैक्स, चिप्स, बिस्कुट, नूडल्स और इंस्टेंट नूडल्स, एडिबल नट्स प्रसंस्करण और पैकेजिंग, ज़र्दा, पान मसाला उद्योग, डायबिटिक फूड और मसाला उद्योग आदि । Sample Plant Layout and Photographs of Plant and Machinery with Suppliers Contact Details भी दिए गए है । कौन सा उद्योग मेरे लिए अच्छा रहेगा ? यह सवाल हर उद्यमी के ज़हन में रहता है, कितनी लागत लगेगी? क्या मुनाफा होगा? कितना माल बनेगा? इस पुस्तक में 178 फ़ूड प्रोजेक्ट्स का विवरण दिया गया है। जो उद्योग चुनने में काफी मददगार होगा । अपना स्वयं का उद्योग स्थापित करें और राष्ट्र की उन्नति में भागीदार बने । इस पुस्तक की मदद से उद्यमी को फूड प्रोसेसिंग सेक्टर में सही उद्योग के चयन में सहायता मिलेगी । यह पुस्तक उद्यमियों, एंटरप्रेन्योर, कृषिविदों, कृषि विश्वविद्यालयों, खाद्य तकनीशियनों और खाद्य उत्पादों के निर्माण के क्षेत्र में रुचि रखने वाले अन्य लोगों के लिए उपयोगी साबित होगी ।

Download or read book Handbook on Food Biotechnology Extraction Processing of Fruits Vegetables and Food Products 2nd Revised Edition written by NIIR Board of Consultants & Engineers and published by NIIR PROJECT CONSULTANCY SERVICES. This book was released on 2017-11-08 with total page 400 pages. Available in PDF, EPUB and Kindle. Book excerpt: Modern biotechnology refers to various scientific techniques used to produce specific desired traits in plants, animals or microorganisms through the use of genetic knowledge. Since its introduction to agriculture and food production in the early-1990, biotechnology has been utilized to develop new tools for improving productivity. Biotechnology is a broad term that applies to the use of living organisms and covers techniques that range from simple to sophisticated. In contrast, modern agricultural biotechnology techniques, such as genetic engineering, allow for more precise development of crop and livestock varieties. The potential benefits of biotechnology are enormous. Food producers can use new biotechnology to produce new products with desirable characteristics. These include characteristics such as disease and drought-resistant plants, leaner meat and enhanced flavor and nutritional quality of foods. This technology has also been used to develop life-saving vaccines, insulin, cancer treatment and other pharmaceuticals to improve quality of life. It is estimated that in the next 20-30 years demand for food will increase by 70%. Biotechnology will be key to meeting this demand. This handbook is designed for use by everyone engaged in thefoodtechnologysuch as fermentation, developing and testing of food and students who are pursuing their career in food biotechnology. It provide all information on modern cooking, food processing and preservation methods, juice preparation methods, etc. The major content of the book are Fermenter and Bio-Reactor Design, Development and Testing of a Milled Shea Nut Mixer, Production of Pure Apple Juice in Natural Colour, Drying of Ginger using Solar Cabinet Dryer, Roasting of Coffee Beans, Processing of Guava into Pulp Guava Leather, Processing and Preservation of Jack Fruit, Quality Changes in Banana, Processing and Quality Evaluation of Banana Natural Colour, Large Scale Separation and Isolation of Proteins, Preparation and Storage Studies on Onion-Ginger-Garlic Paste, Bitterness Development in Kinnow Juice, Effect of Incorporation of Defatted Soyflour, Gum from Ber Fruits, Juice Extraction of Aonla (EmblicaOfficinalisGaertn.) Cv. ‘Chakaiya’, Defatted Mucuna Flour in Biscuits, Detoxifying Enzymes, Processing Methods and Photographs of Machinery with Suppliers Contact Details. This book will be a mile stone for its readers who are new to this sector, will also find useful for professionals, entrepreneurs, those studying and researching in this important area.