Download or read book Advanced Manufacturing written by William B. Bonvillian and published by MIT Press. This book was released on 2018-01-12 with total page 417 pages. Available in PDF, EPUB and Kindle. Book excerpt: How to rethink innovation and revitalize America's declining manufacturing sector by encouraging advanced manufacturing, bringing innovative technologies into the production process. The United States lost almost one-third of its manufacturing jobs between 2000 and 2010. As higher-paying manufacturing jobs are replaced by lower-paying service jobs, income inequality has been approaching third world levels. In particular, between 1990 and 2013, the median income of men without high school diplomas fell by an astonishing 20% between 1990 and 2013, and that of men with high school diplomas or some college fell by a painful 13%. Innovation has been left largely to software and IT startups, and increasingly U.S. firms operate on a system of “innovate here/produce there,” leaving the manufacturing sector behind. In this book, William Bonvillian and Peter Singer explore how to rethink innovation and revitalize America's declining manufacturing sector. They argue that advanced manufacturing, which employs such innovative technologies as 3-D printing, advanced material, photonics, and robotics in the production process, is the key. Bonvillian and Singer discuss transformative new production paradigms that could drive up efficiency and drive down costs, describe the new processes and business models that must accompany them, and explore alternative funding methods for startups that must manufacture. They examine the varied attitudes of mainstream economics toward manufacturing, the post-Great Recession policy focus on advanced manufacturing, and lessons from the new advanced manufacturing institutes. They consider the problem of “startup scaleup,” possible new models for training workers, and the role of manufacturing in addressing “secular stagnation” in innovation, growth, the middle classes, productivity rates, and related investment. As recent political turmoil shows, the stakes could not be higher.
Download or read book Product Design for Manufacture and Assembly Third Edition written by Geoffrey Boothroyd and published by CRC Press. This book was released on 2010-12-08 with total page 710 pages. Available in PDF, EPUB and Kindle. Book excerpt: Hailed as a groundbreaking and important textbook upon its initial publication, the latest iteration of Product Design for Manufacture and Assembly does not rest on those laurels. In addition to the expected updating of data in all chapters, this third edition has been revised to provide a top-notch textbook for university-level courses in product design and manufacturing design. The authors have added a comprehensive set of problems and student assignments to each chapter, making the new edition substantially more useful. See what’s in the Third Edition: Updated case studies on the application of DFMA techniques Extended versions of the classification schemes of the features of products that influence the difficulty of handling and insertion for manual, high-speed automatic, and robot assembly Discussions of changes in the industry such as increased emphasis on the use of surface mount devices New data on basic manufacturing processes Coverage of powder injection molding Recognized as international experts on the re-engineering of electro-mechanical products, the methods and guidelines developed by Boothroyd, Dewhurst, and Knight have been documented to provide significant savings in the product development process. Often attributed with creating a revolution in product design, the authors have been working in product design manufacture and assembly for more than 25 years. Based on theory yet highly practical, their text defines the factors that influence the ease of assembly and manufacture of products for a wide range of the basic processes used in industry. It demonstrates how to develop competitive products that are simpler in configuration and easier to manufacture with reduced overall costs.
Download or read book Handbook of Footwear Design and Manufacture written by A. Luximon and published by Woodhead Publishing. This book was released on 2021-02-11 with total page 530 pages. Available in PDF, EPUB and Kindle. Book excerpt: Handbook of Footwear Design and Manufacture, Second Edition, is a fully updated, expanded guide on the theories, processes, methodologies and technologies surrounding the footwear supply chain. Topics discussed include engineering design methodology, reducing manufacturing waste, footwear advertisement, emerging imaging technology, advice on the optimization of manufacturing processes for productivity, and summaries of the latest advances from researchers around the globe. This updated edition also includes coverage of sizing and grading based on different footwear styles and methods, AI based personalization and customization, emerging models for online footwear shopping (involving data mining), and new methods for foot data analysis and representation. - Covers many exciting new developments, such as AR/VR, additive manufacturing, customization of footwear, new last design methods, and green footwear - Addresses the entire footwear design and manufacture supply chain - Explains new methods for foot data analysis and representation
Download or read book Manufacturing Demand written by David Lewis and published by New Year Publishing. This book was released on 2012-11 with total page 154 pages. Available in PDF, EPUB and Kindle. Book excerpt: Historically, the discipline of marketing has been heavily skewed toward a subjective art at the expense of a measurable science. But the days of hunches, intuitions, and incomplete or misleading perspectives are rapidly disappearing. Today, savvy marketers and forward-looking organizations are embracing innovative new models driven by cutting-edge technology and analytics to align sales and marketing, pinpoint (and respond to) customer needs, and achieve breakthrough revenue gains. In Manufacturing Demand, marketing guru David Lewis, CEO of DemandGen International, reveals the transformations taking place in marketing today, including the rise of the marketing geek and the emergence of the so-called fifth and sixth P s of marketing: Process and Programming. You ll learn about the key practices and principles of creating your demand-generation factory: buyer personas, the demand funnel, lead scoring, lead nurturing, and analytics. Plus, Manufacturing Demand presents plenty of actionable tips and recommendations as well as real-world case studies that showcase how leading companies are achieving tremendous results applying these principles of successful lead management. If you re ready to move into of the next generation of marketing, get ready to start Manufacturing Demand.
Download or read book Manufacturing Consent written by Edward S. Herman and published by Pantheon. This book was released on 2011-07-06 with total page 482 pages. Available in PDF, EPUB and Kindle. Book excerpt: A "compelling indictment of the news media's role in covering up errors and deceptions" (The New York Times Book Review) due to the underlying economics of publishing—from famed scholars Edward S. Herman and Noam Chomsky. With a new introduction. In this pathbreaking work, Edward S. Herman and Noam Chomsky show that, contrary to the usual image of the news media as cantankerous, obstinate, and ubiquitous in their search for truth and defense of justice, in their actual practice they defend the economic, social, and political agendas of the privileged groups that dominate domestic society, the state, and the global order. Based on a series of case studies—including the media’s dichotomous treatment of “worthy” versus “unworthy” victims, “legitimizing” and “meaningless” Third World elections, and devastating critiques of media coverage of the U.S. wars against Indochina—Herman and Chomsky draw on decades of criticism and research to propose a Propaganda Model to explain the media’s behavior and performance. Their new introduction updates the Propaganda Model and the earlier case studies, and it discusses several other applications. These include the manner in which the media covered the passage of the North American Free Trade Agreement and subsequent Mexican financial meltdown of 1994-1995, the media’s handling of the protests against the World Trade Organization, World Bank, and International Monetary Fund in 1999 and 2000, and the media’s treatment of the chemical industry and its regulation. What emerges from this work is a powerful assessment of how propagandistic the U.S. mass media are, how they systematically fail to live up to their self-image as providers of the kind of information that people need to make sense of the world, and how we can understand their function in a radically new way.
Download or read book Furniture Manufacturer and Artisan written by and published by . This book was released on 1920 with total page 468 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book The Manufacturer and Builder written by Peter Henri Van der Weyde and published by . This book was released on 1879 with total page 316 pages. Available in PDF, EPUB and Kindle. Book excerpt: Billed in early issues as "a practical journal of industrial progress", this monthly covers a broad range of topics in engineering, manufacturing, mechanics, architecture, building, etc. Later issues say it is "devoted to the advancement and diffusion of practical knowledge."
Download or read book Manufacturing Decline written by Jason Hackworth and published by . This book was released on 2019-10 with total page 344 pages. Available in PDF, EPUB and Kindle. Book excerpt: Manufacturing Decline argues that antigovernment conservatives capitalized on--and perpetuated--Rust Belt cities' misfortunes by stoking racial resentment. Jason Hackworth traces how the conservative movement has used the imagery and ideas of urban decline since the 1970s to advance their cause.
Download or read book U S Census of Manufactures written by United States. Bureau of the Census and published by . This book was released on 1918 with total page 1684 pages. Available in PDF, EPUB and Kindle. Book excerpt: Includes preliminary publications.
Download or read book Sulfuric Acid Manufacture written by Matt King and published by Newnes. This book was released on 2013-05-11 with total page 528 pages. Available in PDF, EPUB and Kindle. Book excerpt: By some measure the most widely produced chemical in the world today, sulfuric acid has an extraordinary range of modern uses, including phosphate fertilizer production, explosives, glue, wood preservative and lead-acid batteries. An exceptionally corrosive and dangerous acid, production of sulfuric acid requires stringent adherence to environmental regulatory guidance within cost-efficient standards of production. This work provides an experience-based review of how sulfuric acid plants work, how they should be designed and how they should be operated for maximum sulfur capture and minimum environmental impact. Using a combination of practical experience and deep physical analysis, Davenport and King review sulfur manufacturing in the contemporary world where regulatory guidance is becoming ever tighter (and where new processes are being required to meet them), and where water consumption and energy considerations are being brought to bear on sulfuric acid plant operations. This 2e will examine in particular newly developed acid-making processes and new methods of minimizing unwanted sulfur emissions. The target readers are recently graduated science and engineering students who are entering the chemical industry and experienced professionals within chemical plant design companies, chemical plant production companies, sulfuric acid recycling companies and sulfuric acid users. They will use the book to design, control, optimize and operate sulfuric acid plants around the world. - Unique mathematical analysis of sulfuric acid manufacturing processes, providing a sound basis for optimizing sulfuric acid manufacturing processes - Analysis of recently developed sulfuric acid manufacturing techniques suggests advantages and disadvantages of the new processes from the energy and environmental points of view - Analysis of tail gas sulfur capture processes indicates the best way to combine sulfuric acid making and tailgas sulfur-capture processes from the energy and environmental points of view - Draws on industrial connections of the authors through years of hands-on experience in sulfuric acid manufacture
Download or read book Puerto Rico manufactures written by United States. Bureau of the Census and published by . This book was released on 1974 with total page 152 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Handbook of Pharmaceutical Manufacturing Formulations Third Edition written by Sarfaraz K. Niazi and published by CRC Press. This book was released on 2019-12-05 with total page 457 pages. Available in PDF, EPUB and Kindle. Book excerpt: The Handbook of Pharmaceutical Manufacturing Formulations, Third Edition: Volume Three, Liquid Products is an authoritative and practical guide to the art and science of formulating drugs for commercial manufacturing. With thoroughly revised and expanded content, this third volume of a six-volume set, compiles data from FDA and EMA new drug applications, patents and patent applications, and other sources of generic and proprietary formulations including author’s own experience, to cover the broad spectrum of cGMP formulations and issues in using these formulations in a commercial setting. A must-have collection for pharmaceutical manufacturers, educational institutions, and regulatory authorities, this is an excellent platform for drug companies to benchmark their products and for generic companies to formulate drugs coming off patent. Features: Largest source of authoritative and practical formulations, cGMP compliance guidance and self-audit suggestions Differs from other publications on formulation science in that it focuses on readily scalable commercial formulations that can be adopted for cGMP manufacturing Tackles common difficulties in formulating drugs and presents details on stability testing, bioequivalence testing, and full compliance with drug product safety elements Written by a well-recognized authority on drug and dosage form development including biological drugs and alternative medicines
Download or read book Manufacturing Consent written by Michael Burawoy and published by University of Chicago Press. This book was released on 2012-10-15 with total page 286 pages. Available in PDF, EPUB and Kindle. Book excerpt: Since the 1930s, industrial sociologists have tried to answer the question, Why do workers not work harder? Michael Burawoy spent ten months as a machine operator in a Chicago factory trying to answer different but equally important questions: Why do workers work as hard as they do? Why do workers routinely consent to their own exploitation? Manufacturing Consent, the result of Burawoy's research, combines rich ethnographical description with an original Marxist theory of the capitalist labor process. Manufacturing Consent is unique among studies of this kind because Burawoy has been able to analyze his own experiences in relation to those of Donald Roy, who studied the same factory thirty years earlier. Burawoy traces the technical, political, and ideological changes in factory life to the transformations of the market relations of the plant (it is now part of a multinational corporation) and to broader movements, since World War II, in industrial relations.
Download or read book Michigan Manufacturer Financial Record written by and published by . This book was released on 1910 with total page 16 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book The Manufacture of Iron in All Its Various Branches written by Frederick Overman and published by . This book was released on 1854 with total page 500 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book The Lumber Manufacturer and Dealer written by and published by . This book was released on 1920 with total page 1262 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Carbonated Soft Drinks written by Dr. David Steen and published by John Wiley & Sons. This book was released on 2008-04-15 with total page 368 pages. Available in PDF, EPUB and Kindle. Book excerpt: The market for carbonated beverages has grown dramatically overrecent years in most countries, and this growth has requiredchanges in the way factories are run. Like other food products,soft drinks are required to be produced under stringent hygieneconditions. Filling technology has progressed rapidly to meet theneeds of manufacturers and consumers alike. Packaging choices havechanged and there have been improvements in closure design. This book provides an overview of carbonated soft drinks productionin the early part of the twenty first century, presenting thelatest information on carbonation and filling methods. There arealso chapters on bottle design, can making, general packagingconsiderations, production and distribution. A final chapter dealswith quality assurance, and environmental and legislative issues.Detailed references provide opportunity for further reading in morespecialised areas. The book is aimed at graduates in food science,chemistry, microbiology and engineering who are considering acareer in the soft drinks industry, as well as technical staffalready employed within the industry and associated suppliers.
