Download or read book Water Supply Development for Membrane Water Treatment Facilities written by Thomas M. Missimer and published by CRC Press. This book was released on 2018-02-06 with total page 271 pages. Available in PDF, EPUB and Kindle. Book excerpt: Based on new primary and secondary drinking water standards, this detailed manual presents water treatment methods that are considered the "best available technology" by the U.S. Environmental Protection Agency (EPA). It examines the design of water supplies for membrane water treatment plants, including reverse osmosis, membrane filtration, and electrodialysis methods, and it explains process design and the water quality problems associated with each process. It also considers significant aspects of membrane process and groundwater and surface water supply development. Information necessary to operate water supplies and evaluate problems in the system are provided, in addition to specific well construction details necessary for the water wells used to supply membrane plants.
Download or read book Cost Estimating Manual for Water Treatment Facilities written by Susumu Kawamura and published by Wiley. This book was released on 2008-09-16 with total page 224 pages. Available in PDF, EPUB and Kindle. Book excerpt: NOTE TO THE READER: All forms and material that were previously on a CD-ROM that accompanied this book have been moved to the following web site: http://booksupport.wiley.com Tested-and-proven techniques for quick, accurate estimates Here is the first manual that guides engineers, planners, and contractors through the process of estimating the cost of building water treatment facilities. Based on more than eighty years of the two authors' collective experience, the Cost Estimating Manual for Water Treatment Facilities not only enables you to arrive at a dependable estimate, it shows you how to do it quickly with a minimum of information and supporting data. In order to ensure reliability, the authors have compiled and analyzed the results from their own construction cost estimates for more than 500 projects as well as the results from many other engineers and contractors. The manual identifies forty-three treatment processes, nine types of water treatment plants, plus five additional types of advanced water treatment plants. The authors then demonstrate how to calculate costs for each element, accounting for needed mark-ups and allowances in order to arrive at the total plant construction cost. To help you make your own estimates, the manual provides: Examples of cost estimates for different water treatment processes Historical data from several public agencies Sample tables for 10 mgd and 100 mgd product water flow rates for each type of treatment plant Website access with Excel spreadsheets that enable you to perform estimates using your own data Now that the Cost Estimating Manual for Water Treatment Facilities is available, you no longer have to rely on hunches and anecdotal information; you have a proven, scientific method that leads to reliable estimates.
Download or read book Water and Wastewater Calculations Manual 2nd Ed written by Shun Lin and published by McGraw-Hill Professional. This book was released on 2007-06-26 with total page 972 pages. Available in PDF, EPUB and Kindle. Book excerpt: Quick Access to the Latest Calculations and Examples for Solving All Types of Water and Wastewater Problems! The Second Edition of Water and Wastewater Calculations Manual provides step-by-step calculations for solving a myriad of water and wastewater problems. Designed for quick-and-easy access to information, this revised and updated Second Edition contains over 110 detailed illustrations and new material throughout. Written by the internationally renowned Shun Dar Lin, this expert resource offers techniques and examples in all sectors of water and wastewater treatment. Using both SI and US customary units, the Second Edition of Water and Wastewater Calculations Manual features: Coverage of stream sanitation, lake and impoundment management, and groundwater Conversion factors, water flow calculations, hydraulics in pipes, weirs, orifices, and open channels, distribution, outlets, and quality issues In-depth emphasis on drinking water treatment and water pollution control technologies Calculations specifically keyed to regulation requirements New to this edition: regulation updates, pellet softening, membrane filtration, disinfection by-products, health risks, wetlands, new and revised examples using field data Inside this Updated Environmental Reference Tool • Streams and Rivers • Lakes and Reservoirs • Groundwater • Fundamental and Treatment Plant Hydraulics • Public Water Supply • Wastewater Engineering • Appendices: Macro invertebrate Tolerance List • Well Function for Confined Aquifers • Solubility Product Constants for Solution at or near Room Temperature • Freundlich Adsorption Isotherm Constants for Toxic Organic Compounds • Conversion Factors
Download or read book Water Distribution System Operation and Maintenance written by Kenneth D. Kerri and published by . This book was released on 2000-02 with total page 694 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Handbook of Water and Wastewater Treatment Plant Operations written by Frank R. Spellman and published by CRC Press. This book was released on 2020-05-17 with total page 1344 pages. Available in PDF, EPUB and Kindle. Book excerpt: The Handbook of Water and Wastewater Treatment Plant Operations is the first thorough resource manual developed exclusively for water and wastewater plant operators. Now regarded as an industry standard, this fourth edition has been updated throughout, and explains the material in easy-to-understand language. It also provides real-world case studies and operating scenarios, as well as problem-solving practice sets for each scenario. Features: Updates the material to reflect the developments in the field Includes new math operations with solutions, as well as over 250 new sample questions Adds updated coverage of energy conservation measures with applicable case studies Enables users to properly operate water and wastewater plants and suggests troubleshooting procedures for returning a plant to optimum operation levels Prepares operators for licensure exams A complete compilation of water science, treatment information, process control procedures, problem-solving techniques, safety and health information, and administrative and technological trends, this text serves as a resource for professionals working in water and wastewater operations and operators preparing for wastewater licensure exams. It can also be used as a supplemental textbook for undergraduate and graduate students studying environmental science, water science, and environmental engineering.
Download or read book Water Safety Plan Manual written by World Health Organization and published by World Health Organization. This book was released on 2009 with total page 109 pages. Available in PDF, EPUB and Kindle. Book excerpt: In 2004, the WHO Guidelines for Drinking Water Quality recommended that water suppliers develop and implement "Water Safety Plans" (WSPs) in order to systematically assess and manage risks. Since this time, governments and regulators, water suppliers and practitioners have increasingly embraced this approach, but they have also requested further guidance. This much-anticipated workbook answers this call by describing how to develop and implement a WSP in clear and practical terms. Stepwise advice is provided through 11 learning modules, each representing a key step in the WSP development and implementation process: 1. Assemble the WSP team; 2. Describe the water supply system; 3. Identify hazards and hazardous events and assess the risks; 4. Determine and validate control measures, reassess and prioritise the risks; 5. Develop, implement and maintain an improvement/upgrade plan; 6. Define monitoring of the control measures; 7. Verify the effectiveness of the WSP; 8. Prepare management procedures; 9. Develop supporting programmes; 10. Plan and carry out periodic review of the WSP; 11. Revise the WSP following an incident ; Every Module is divided into three sections: 'Overview', 'Examples and Tools', and 'Case studies'. The overview section provides a brief introduction to the Module, including why it is important and how it fits into the overall WSP development and implementation process. It outlines key activities that should be carried out, lists typical challenges that may be encountered, and summarizes the essential outputs to be produced. The examples and tools section provides resources which could be adapted to support the development and implementation of WSPs. These resources include example tables and checklists, template forms, diagrams, or practical tips to help a WSP team address specific challenges. These are often example outputs and methodologies adapted from recent WSP experiences. Each Module concludes with case studies so the reader can benefit from lessons-learned from real-life experiences. They are intended to make WSP concepts more concrete and to help readers anticipate issues and challenges that may arise. The descriptions were drawn from WSP initiatives in Australia, the Latin American and the Caribbean region (LAC), and the United Kingdom.
Download or read book Onsite Wastewater Treatment Systems Manual written by and published by . This book was released on 2002 with total page 378 pages. Available in PDF, EPUB and Kindle. Book excerpt: "This manual contains overview information on treatment technologies, installation practices, and past performance."--Introduction.
Download or read book Principles of Water Treatment written by Kerry J. Howe and published by John Wiley & Sons. This book was released on 2012-11-06 with total page 674 pages. Available in PDF, EPUB and Kindle. Book excerpt: Principles of Water Treatment has been developed from the best selling reference work Water Treatment, 3rd edition by the same author team. It maintains the same quality writing, illustrations, and worked examples as the larger book, but in a smaller format which focuses on the treatment processes and not on the design of the facilities.
Download or read book Water Quality Treatment A Handbook on Drinking Water written by American Water Works Association and published by McGraw Hill Professional. This book was released on 2010-12-06 with total page 1696 pages. Available in PDF, EPUB and Kindle. Book excerpt: The definitive water quality and treatment resource--fully revised and updated Comprehensive, current, and written by leading experts, Water Quality & Treatment: A Handbook on Drinking Water, Sixth Edition covers state-of-the-art technologies and methods for water treatment and quality control. Significant revisions and new material in this edition reflect the latest advances and critical topics in water supply and treatment. Presented by the American Water Works Association, this is the leading source of authoritative information on drinking water quality and treatment. NEW CHAPTERS ON: Chemical principles, source water composition, and watershed protection Natural treatment systems Water reuse for drinking water augmentation Ultraviolet light processes Formation and control of disinfection by-products DETAILED COVERAGE OF: Drinking water standards, regulations, goals, and health effects Hydraulic characteristics of water treatment reactors Gas-liquid processes and chemical oxidation Coagulation, flocculation, sedimentation, and flotation Granular media and membrane filtration Ion exchange and adsorption of inorganic contaminants Precipitation, coprecipitation, and precipitative softening Adsorption of organic compounds by activated carbon Chemical disinfection Internal corrosion and deposition control Microbiological quality control in distribution systems Water treatment plant residuals management
Download or read book Handbook of Water and Wastewater Treatment Plant Operations Third Edition written by Frank R. Spellman and published by CRC Press. This book was released on 2013-10-21 with total page 926 pages. Available in PDF, EPUB and Kindle. Book excerpt: Handbook of Water and Wastewater Treatment Plant Operations the first thorough resource manual developed exclusively for water and wastewater plant operators has been updated and expanded. An industry standard now in its third edition, this book addresses management issues and security needs, contains coverage on pharmaceuticals and personal care products (PPCPs), and includes regulatory changes. The author explains the material in layman’s terms, providing real-world operating scenarios with problem-solving practice sets for each scenario. This provides readers with the ability to incorporate math with both theory and practical application. The book contains additional emphasis on operator safety, new chapters on energy conservation and sustainability, and basic science for operators. What’s New in the Third Edition: Prepares operators for licensure exams Provides additional math problems and solutions to better prepare users for certification exams Updates all chapters to reflect the developments in the field Enables users to properly operate water and wastewater plants and suggests troubleshooting procedures for returning a plant to optimum operation levels A complete compilation of water science, treatment information, process control procedures, problem-solving techniques, safety and health information, and administrative and technological trends, this text serves as a resource for professionals working in water and wastewater operations and operators preparing for wastewater licensure exams. It can also be used as a supplemental textbook for undergraduate and graduate students studying environmental science, water science, and environmental engineering.
Download or read book Guidance Manual for Compliance with the Filtration and Disinfection Requirements for Public Water Systems Using Surface Water Sources written by David J. Hiltebrand and published by . This book was released on 1991 with total page 672 pages. Available in PDF, EPUB and Kindle. Book excerpt: This manual suggests design operating and performance criteria for specific surface water quality conditions to provide the optimum protection from microbiological contaminants.
Download or read book Optimizing Water Treatment Plant Performance Using the Composite Correction Program written by and published by . This book was released on 1998 with total page 350 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Stantec s Water Treatment written by John C. Crittenden and published by John Wiley & Sons. This book was released on 2022-11-08 with total page 1956 pages. Available in PDF, EPUB and Kindle. Book excerpt: The updated third edition of the definitive guide to water treatment engineering, now with all-new online content Stantec's Water Treatment: Principles and Design provides comprehensive coverage of the principles, theory, and practice of water treatment engineering. Written by world-renowned experts in the field of public water supply, this authoritative volume covers all key aspects of water treatment engineering, including plant design, water chemistry and microbiology, water filtration and disinfection, residuals management, internal corrosion of water conduits, regulatory requirements, and more. The updated third edition of this industry-standard reference includes an entirely new chapter on potable reuse, the recycling of treated wastewater into the water supply using engineered advanced treatment technologies. QR codes embedded throughout the book connect the reader to online resources, including case studies and high-quality photographs and videos of real-world water treatment facilities. This edition provides instructors with access to additional resources via a companion website. Contains in-depth chapters on processes such as coagulation and flocculation, sedimentation, ion exchange, adsorption, and gas transfer Details membrane filtration technologies, advanced oxidation, and potable reuse Addresses ongoing environmental concerns, pharmacological agents in the water supply, and treatment strategies Describes reverse osmosis applications for brackish groundwater, wastewater, and other water sources Includes high-quality images and illustrations, useful appendices, tables of chemical properties and design data, and more than 450 exercises with worked solutions Stantec's Water Treatment: Principles and Design, Updated Third Edition remains an indispensable resource for engineers designing or operating water treatment plants, and is an essential textbook for students of civil, environmental, and water resources engineering.
Download or read book Developing Rates for Small Systems written by American Water Works Association and published by American Water Works Association. This book was released on 2004 with total page 75 pages. Available in PDF, EPUB and Kindle. Book excerpt: The brand new manual provides step-by-step guidance to determine revenue requirements, analyze rates, develop a financial plan, and design a better rate structure -- even with limited resources and data. Written for small water systems (defined as serving a population of up to 10,000) it focuses on the unique attributes of small systems as related to financial planning and rate design, with the understanding that most data is contained in the current customer billing system, and merely needs to be massaged. With details plus a sample case study, it helps develop a rate structure that emphasizes simplicity and ease of billing, while at the same time recognizes cost recovery and equitability. Also covered are communications with the public, which is integral to a successful rate restructuring, regulatory approval, system development funding, and rate phase-in.
Download or read book Environmental Water written by V.K. Gupta and published by Newnes. This book was released on 2012-11-29 with total page 231 pages. Available in PDF, EPUB and Kindle. Book excerpt: The world is facing a drinking water crisis. Besides continuous population growth, uneven distribution of water resources and periodic droughts have forced scientists to search for new and effective water treatment, remediation and recycling technologies. Therefore, there is a great need for the development of suitable, inexpensive and rapid wastewater treatment and reuse or conservation methods. This title discusses different types of wastewater treatment, remediation and recycling techniques, like adsorption, membrane filtration and reverse osmosis. It also provides guidance for the selection of the appropriate technologies or their combinations for specific applications so that one can select the exact and accurate technology without any problem. The book comprises detailed discussion on the application of various technologies for water treatment, remediation and recycling technologies and provides an update on the development in water treatment, detailed analysis of their features and economic analysis, bridging the current existing information gap. Each chapter is also documented by references and updated citations. Provides guidance for the selection of the appropriate technologies to industrialists and government authorities for the selection of exact, inexpensive technologies for specific problem solving Discusses the developments of inexpensive and rapid wastewater treatment, remediation and recycling Gives information on the application of analytical techniques, such as GC, LC, IR, and XRF for analysing and measuring water Provides an updated development in water treatment technologies, detailed analysis of their features and economic analysis, enabling to choose a problem-specific solution Completely updates the current knowledge in this field, bridging the current existing information gap
Download or read book Costing Improved Water Supply Systems for Low income Communities written by Fabrizio Carlevaro and published by IWA Publishing. This book was released on 2015-08-15 with total page 258 pages. Available in PDF, EPUB and Kindle. Book excerpt: This manual and the free downloadable costing tool is the outcome of a project identified by the Water, Sanitation and Health Programme (WSH) of the World Health Organization (WHO) faced with the challenge of costing options for improved access, both to safe drinking water and to adequate sanitation. Although limited in scope to the process of costing safe water supply technologies, a proper use of this material lies within a larger setting considering the cultural, environmental, institutional, political and social conditions that should be used by policy decision makers in developing countries to promote sustainable development strategies. Costing Improved Water Supply Systems for Low-income Communities provides practical guidance to facilitate and standardize the implementation of social life-cycle costing to “improved” drinking-water supply technologies. These technologies have been defined by the WHO/UNICEF Joint Monitoring Programme for Water Supply and Sanitation, as those that, by the nature of its construction, adequately protect the source of water from outside contamination, in particular with faecal matter. The conceptual framework used has also been conceived to be applied to costing improved sanitation options. To facilitate the application of the costing method to actual projects, a basic tool was developed using Microsoft Excel, which is called a water supply costing processor. It enables a user-friendly implementation of all the tasks involved in a social life-cycle costing process and provides both the detailed and the consolidated cost figures that are needed by decision-makers. The scope and the limits of the costing method in a real setting was assessed through field tests designed and performed by local practitioners in selected countries. These tests were carried out in Peru and in six countries in the WHO regions of South-East Asia and the Western Pacific. They identified practical issues in using the manual and the water supply costing processor and provided practical recommendations. References and Glossary Author(s): Fabrizio Carlevaro, Geneva School of Economics and Management, Switzerland and Cristian Gonzalez, International Road Federation, Geneva, Switzerland
Download or read book Compilation of Water Supply and Treatment written by and published by . This book was released on 2010 with total page 578 pages. Available in PDF, EPUB and Kindle. Book excerpt:
