Download or read book Manual on the Causes and Control of Activated Sludge Bulking and Foaming Second Edition written by David Jenkins and published by CRC Press. This book was released on 1993-05-03 with total page 224 pages. Available in PDF, EPUB and Kindle. Book excerpt: This manual describes methods for diagnosing and rectifying activated sludge solids separation problems, which are one of the most common causes of permit violations in activated sludge wastewater treatment plants. The book is written in an easy-to-understand format that will help you resolve real-life problems. Lab techniques, theoretical considerations, design and control methods, and case histories are provided. The clear discussions make it ideal not only for practitioners and consultants, but also for students and professors. Every environmental consulting company, wastewater treatment plant, laboratory, and university should have at least one copy of this hands-on practical manual.
Download or read book Manual on the Causes Control of Activated Sludge Bulking Foaming written by D.- Richard Jenkins (M.G.) and published by . This book was released on 1986 with total page 0 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Manual on the Causes and Control of Activated Sludge Bulking an Foaming written by D. Jenkins and published by . This book was released on 1986 with total page pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Manual on the Causes and Control of Activated Sludge Bulking and Foaming written by David Jenkins and published by . This book was released on 1993 with total page 193 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Manual on the Causes and Control of Activated Sludge Bulking Foaming and other Solids Separation Problems written by Michael G Richard and published by IWA Publishing. This book was released on 2003-08-31 with total page 0 pages. Available in PDF, EPUB and Kindle. Book excerpt: The most common activated sludge operating problems causing poor plant performance are related to solids separation. Especially common are bulking and foaming. Without a proper scientific foundation to support the efforts of wastewater treatment plant management, many attempts to thwart bulking and foaming have failed. Manual on the Causes and Control of Activated Sludge Bulking, Foaming and other Solids Separation Problems provides the critical scientific and practical underpinnings needed to understand and combat these problems. The third edition of this flagship text is a comprehensive, concise guide to the microbiological and technical aspects of controlling all types of solid separation problems. The scientific theory is applied to real-world scenarios, greatly increasing the number of real-world examples of successful control methods. New information is also included on filamentous organism growth and its application in the control of sludge bulking and foaming. Now plant operators, regulators and wastewater engineers have a complete guide for battling these formidable design and operating problems. Features of the Manual include: Discussion of the mechanisms of the bioflocculation involved in the formation of activated sludge flocs Many new case histories of the practical diagnosis and resolution of activated sludge solids separation problems Re-examination of the filament backbone concept of floc structure, with additional focus on strong flocs that are devoid of filamentous organisms Analysis of bulking and foaming caused by nocardioform organisms and Microthrix parvicella, with emphasis on their origins and control methods New photographs and descriptions of filamentous organisms responsible for bulking and foaming Results of recent studies of activated sludge and previously unknown microorganisms - and the potential use of molecular biological tools in diagnosing bulking and foaming problems.
Download or read book Manual on the Causes and Control of Activated Sludge Bulking Foaming and Other Solids Separation Problems 3rd Edition written by David Jenkins and published by CRC Press. This book was released on 2003-08-27 with total page 216 pages. Available in PDF, EPUB and Kindle. Book excerpt: The most common activated sludge operating problems causing poor plant performance are related to solids separation. Especially common are bulking and foaming. Without a proper scientific foundation to support the efforts of wastewater treatment plant management, many attempts to thwart bulking and foaming have failed. Manual on Solving Activated Sludge Bulking, Foaming, and Other Solids Separation Problems provides the critical scientific and practical underpinnings needed to understand and combat these problems. The third edition of this flagship text is a comprehensive, concise guide to the microbiological and technical aspects of controlling all types of solid separation problems. The scientific theory is applied to real-world scenarios, greatly increasing the number of real-world examples of successful control methods. New information is also included on filamentous organism growth and its application in the control of sludge bulking and foaming. Now plant operators, regulators and wastewater engineers have a complete guide for battling these formidable design and operating problems.
Download or read book Activated Sludge written by Jiri Wanner and published by CRC Press. This book was released on 2014-07-22 with total page 338 pages. Available in PDF, EPUB and Kindle. Book excerpt: The result of over 25 years of research, this book is a concise guide to the microbiological and technical aspects of bulking and foaming control. It stresses practical control measures based on kinetic and metabolic selection theories and supported by case histories. Topics include: biochemical processes in wastewater treatment, evaluation of separation problems, settling and foaming principles, bulking and foaming control methods, and system design. More than 100 tables and figures illustrate complex processes, and over 500 references provide a detailed compendium of available resources. Cross-references provide background of a problem, its connection to similar problems, and their solutions.
Download or read book Process Control of Activated Sludge Plants by Microscopic Investigation written by Dick H. Eikelboom and published by IWA Publishing. This book was released on 2000-06-30 with total page 172 pages. Available in PDF, EPUB and Kindle. Book excerpt: This title is only available as a free copy to download from the WaterWiki. To download your free copy of the eBook, click here. The manual can be used independantly but when used in combination with the CD-ROM, it makes a unique tool for process operators to diagnose and solve operational problems. It is also a valuable educational and training package for universities and post experience courses. Click here for more details about the CD-ROM Process stability and final effluent quality largely depend upon the composition of the biomass in an activated sludge plant. Operational problems such as bulking and scum formation occur when the wrong micro-organisms are dominating the sludge population. Microscopic sludge investigation is therefore essential for process control and stable plant operation. The manual outlines the theoretical framework, extensively illustrated with full-colour micrographs. Contents Microscopy Microscopic sludge investigation Characteristics of activated sludge flocs Filamentous micro-organisms Protozoa and metazoa Conclusions of microscopic sludge investigation The activated sludge process Operational problems Bulking sludge Scum formation
Download or read book The Causes and Control of Activated Sludge Bulking and Foaming written by United States. Environmental Protection Agency and published by . This book was released on 1987 with total page 92 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Activated Sludge Separation Problems written by Valter Tandoi and published by IWA Publishing. This book was released on 2017-09-15 with total page 324 pages. Available in PDF, EPUB and Kindle. Book excerpt: Activated Sludge Separation Problems: Theory, Control Measures, Practical Experiences, Second Edition, describes the most common activated sludge separation problems and explains the main reasons for the growth of the different filamentous microorganisms in activated sludge. The book summarizes the identification techniques for important groups of activated sludge microorganisms both based on conventional microscopic analysis and using the biological molecular tools available today (FISH and PCR). This new edition, with 70% new and updated material, also provides explanation of basic activated sludge process principles and of parameters necessary for process control and operation. The theory of secondary clarifies is described to the extent necessary for understanding the construction and operation of secondary clarifiers. The activated sludge reactor and secondary clarifies are treated as one system and the interactions are explained. The wide range of experiences around the world is documented and the methods to avoid the proliferation of these organisms are presented and critically reviewed. Activated Sludge Separation Problems consists of six chapters, presenting up-to-date technical and scientific aspects of these processes. The new edition also features an extended list of literature references for further reading. The book will be a valuable help for students of environmental engineering, wastewater specialists, plant operators and designers of activated sludge plants. It is also useful for specialists in wastewater operation laboratories, especially for those studying activated sludge separation properties.
Download or read book Wastewater Microbiology written by Toni Glymph and published by American Water Works Association. This book was released on 2011-01-12 with total page 196 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book provides a very basic overview of microorganisms relevant to wastewater treatment plant operator. It easy-to-understand language it provides explanations and descriptions of helpful and harmful bacteria, protozoa, and metazoa, algae, and fungus -- and their specialized function in the treatment process, helping the operator to effectively manage the Plant bacterial process. Color photos and illustrations are included within the book and on the supplemental CD-ROM for quick identification under the microscope.
Download or read book Wastewater Microbiology written by Gabriel Bitton and published by John Wiley & Sons. This book was released on 2011-06-09 with total page 809 pages. Available in PDF, EPUB and Kindle. Book excerpt: Wastewater Microbiology focuses on microbial contaminants found in wastewater, methods of detection for these contaminants, and methods of cleansing water of microbial contamination. This classic reference has now been updated to focus more exclusively on issues particular to wastewater, with new information on fecal contamination and new molecular methods. The book features new methods to determine cell viability/activity in environmental samples; a new section on bacterial spores as indicators; new information covering disinfection byproducts, UV disinfection, and photoreactivation; and much more. A PowerPoint of figures from the book is available at ftp://ftp.wiley.com/public/sci_tech_med/wastewater_microbiology.
Download or read book The Causes and Control of Activated Sludge Bulking and Foaming written by and published by . This book was released on 1987 with total page 104 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book The Microbiology of Activated Sludge written by Robert J. Seviour and published by Springer Science & Business Media. This book was released on 2012-12-06 with total page 433 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book has been a long time in preparation. Initially it grew out of our frustrating attempts over the past ten years to identify the filamentous bacteria seen in large numbers in most activated sludge plants, and the realization that we know very little about them and the other microbial populations in these systems. Unfortunately this book does not provide many answers to the problems these filamentous bacteria can cause, but we hope it might encourage microbiologists and engineers to communi cate more with each other and to spend some time trying to understand the tax onomy, ecology and physiology of activated sludge microbes. It is now very timely, for example, to try to provide these filamentous bacteria with proper taxonomically valid names and to determine their correct place in bacterial classifications. This book is not meant to compete directly with the books by Gray (1989, 1990) nor the excellent manual published by Jenkins and coworkers (1993b), which has been invaluable to us and others trying to identify filamentous bacteria. Wanner's book (1994a) also provides an excellent account of the problems of bulking and foaming caused by filamentous bacteria. These publications and others by Eikelboom's group have made an enormous contribution to the study of filamentous bacteria, and will con tinue to do so.
Download or read book Septic Systems Handbook written by O. Benjamin Kaplan and published by CRC Press. This book was released on 2014-07-22 with total page 457 pages. Available in PDF, EPUB and Kindle. Book excerpt: Septic Systems Handbook, Second Edition covers all aspects of such topics as septic tanks, perk tests, leachlines, and onsite disposal technologies. This handy reference is filled with numerous practical tips for troubleshooting and creative problem solving. The many appendices offer valuable information, including dealing effectively with bureaucr
Download or read book Benchmarking of Control Strategies for Wastewater Treatment Plants written by Krist V. Gernaey and published by IWA Publishing. This book was released on 2014-09-15 with total page 166 pages. Available in PDF, EPUB and Kindle. Book excerpt: Wastewater treatment plants are large non-linear systems subject to large perturbations in wastewater flow rate, load and composition. Nevertheless these plants have to be operated continuously, meeting stricter and stricter regulations. Many control strategies have been proposed in the literature for improved and more efficient operation of wastewater treatment plants. Unfortunately, their evaluation and comparison – either practical or based on simulation – is difficult. This is partly due to the variability of the influent, to the complexity of the biological and biochemical phenomena and to the large range of time constants (from a few minutes to several days). The lack of standard evaluation criteria is also a tremendous disadvantage. To really enhance the acceptance of innovative control strategies, such an evaluation needs to be based on a rigorous methodology including a simulation model, plant layout, controllers, sensors, performance criteria and test procedures, i.e. a complete benchmarking protocol. This book is a Scientific and Technical Report produced by the IWA Task Group on Benchmarking of Control Strategies for Wastewater Treatment Plants. The goal of the Task Group includes developing models and simulation tools that encompass the most typical unit processes within a wastewater treatment system (primary treatment, activated sludge, sludge treatment, etc.), as well as tools that will enable the evaluation of long-term control strategies and monitoring tasks (i.e. automatic detection of sensor and process faults). Work on these extensions has been carried out by the Task Group during the past five years, and the main results are summarized in Benchmarking of Control Strategies for Wastewater Treatment Plants. Besides a description of the final version of the already well-known Benchmark Simulation Model no. 1 (BSM1), the book includes the Benchmark Simulation Model no. 1 Long-Term (BSM1_LT) – with focus on benchmarking of process monitoring tasks – and the plant-wide Benchmark Simulation Model no. 2 (BSM2). Authors: Krist V. Gernaey, Technical University of Denmark, Lyngby, Denmark, Ulf Jeppsson, Lund University, Sweden, Peter A. Vanrolleghem, Université Laval, Quebec, Canada and John B. Copp, Primodal Inc., Hamilton, Ontario, Canada
Download or read book Activated Sludge 100 Years and Counting written by David Jenkins and published by IWA Publishing. This book was released on 2014-05-31 with total page 460 pages. Available in PDF, EPUB and Kindle. Book excerpt: Activated Sludge - 100 Years and Counting covers the current status of all aspects of the activated sludge process and looks forward to its further development in the future. It celebrates 100 years of the Activated Sludge process, from the time that the early developers presented the seminal works that led to its eventual worldwide adoption. The book assembles contributions from renowned world leaders in activated sludge research, development, technology and application. The objective of the book is to summarise the knowledge of all aspects of the activated sludge process and to present and discuss anticipated future developments. The book comprises invited papers that were delivered at the conference "Activated Sludge...100 Years and Counting!", held in Essen, Germany, June 12th to 14th, 2014. Activated Sludge - 100 Years and Counting is of interest to researchers, engineers, designers, operations specialists, and governmental agencies from a wide range of disciplines associated with all aspects of the activated sludge process. Authors: David Jenkins, University of California at Berkeley, USA, Jiri Wanner, Institute of Chemical Technology, Prague, Czech Republic.
