Download or read book Manual of Biocorrosion written by HectorA. Videla and published by Routledge. This book was released on 2018-04-27 with total page 242 pages. Available in PDF, EPUB and Kindle. Book excerpt: The Manual of Biocorrosion explains the microbiology, electrochemistry, and surface phenomena involved in biocorrosion and biofouling processes. Written primarily for non-specialists, the information in this manual is practical and offers a comprehensive look at the three components of biocorrosion: the microorganisms, the metal, and the aqueous environment. It also addresses methods for the monitoring, prevention, and control of biocorrosion. The first part of the book covers the fundamental aspects of microbiology, electrochemistry, and biofouling of metal surfaces. The second half describes biocorrosion assessment in the laboratory and the field, the main control and mitigation procedures used, practical case studies, and laboratory methods and formulations. The Manual of Biocorrosion is the book the industrial sector (water treatment plants, oil refineries, etc.) has been waiting for, providing the basics for implementing prevention, control, and mitigation procedures. In addition, it covers the latest industry trends with discussions of biocide selection, strategies for treating biocorrosion without harming the environment, and the latest monitoring programs. The academic sector will benefit as well from the up-to-date information on mechanisms and recent advances in all biocorrosion aspects and technology. Research trends such as the application of surface analysis techniques and modern electron microscopy, the use of conventional and innovative electrochemical techniques for assessment, and microbial inhibition of corrosion are all considered. Features 100 illustrations provide you with a visual understanding of the problems and techniques discussed 30 tables give you quick access to data 46 suggested readings provide references on books, conference and workshop proceedings, and special issues of scientific journals and technical publications specifically devoted to biocorrosion and biofouling 454 reference

Download or read book Manual of Biocorrosion written by HectorA. Videla and published by Routledge. This book was released on 2018-04-27 with total page 304 pages. Available in PDF, EPUB and Kindle. Book excerpt: The Manual of Biocorrosion explains the microbiology, electrochemistry, and surface phenomena involved in biocorrosion and biofouling processes. Written primarily for non-specialists, the information in this manual is practical and offers a comprehensive look at the three components of biocorrosion: the microorganisms, the metal, and the aqueous environment. It also addresses methods for the monitoring, prevention, and control of biocorrosion. The first part of the book covers the fundamental aspects of microbiology, electrochemistry, and biofouling of metal surfaces. The second half describes biocorrosion assessment in the laboratory and the field, the main control and mitigation procedures used, practical case studies, and laboratory methods and formulations. The Manual of Biocorrosion is the book the industrial sector (water treatment plants, oil refineries, etc.) has been waiting for, providing the basics for implementing prevention, control, and mitigation procedures. In addition, it covers the latest industry trends with discussions of biocide selection, strategies for treating biocorrosion without harming the environment, and the latest monitoring programs. The academic sector will benefit as well from the up-to-date information on mechanisms and recent advances in all biocorrosion aspects and technology. Research trends such as the application of surface analysis techniques and modern electron microscopy, the use of conventional and innovative electrochemical techniques for assessment, and microbial inhibition of corrosion are all considered. Features 100 illustrations provide you with a visual understanding of the problems and techniques discussed 30 tables give you quick access to data 46 suggested readings provide references on books, conference and workshop proceedings, and special issues of scientific journals and technical publications specifically devoted to biocorrosion and biofouling 454 reference

Download or read book A Practical Manual on Microbiologically Influenced Corrosion written by Gregory Kobrin and published by Nace International. This book was released on 1993 with total page 264 pages. Available in PDF, EPUB and Kindle. Book excerpt:

Download or read book Microbiologically Influenced Corrosion Handbook written by S Borenstein and published by Woodhead Publishing. This book was released on 1994-01-15 with total page 308 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book provides fundamental background for understanding the interdisciplinary roles of microbiology, metallurgy, and electrochemistry as they relate to microbiologically influenced corrosion (MIC). Methods by which MIC can be detected and monitored are discussed, as well as its prevention. How welding, heat treatment, and other metallurgical processes and variables affect corrosion resistance are also examined. Copyright © Libri GmbH. All rights reserved.

Download or read book Practical Manual of Biocorrosion and Biofouling for the Industry written by Mario Daniel Ferrari and published by . This book was released on 1998 with total page 178 pages. Available in PDF, EPUB and Kindle. Book excerpt:

Download or read book Understanding Biocorrosion written by T Liengen and published by Elsevier. This book was released on 2014-11-14 with total page 447 pages. Available in PDF, EPUB and Kindle. Book excerpt: Biocorrosion refers to corrosion influenced by bacteria adhering to surfaces in biofilms. Biocorrosion is a major problem in areas such as cooling systems and marine structures where biofilms can develop. This book summarises key recent research in this subject. Part one looks at theories of biocorrosion and measurement techniques. Part two discusses how bacteria and biofilms result in biocorrosion. The final part of the book includes case studies of biocorrosion in areas as diverse as buildings, fuels, marine environments and cooling systems. Provides a detailed overview of biocorrosion and the different scientific and/or industrial problems related to microbially induced corrosion Introduces a variety of investigative techniques and methodologies that are employed in diagnosing and evaluating microbially induced corrosion Includes case studies on: biodeterioration of building materials; biocorrosion issues associated with diesel and biofuels; marine biocorrosion; corrosion of open recirculating cooling water systems and cooling system components; the effect of H2S on steel corrosion

Download or read book Guide to Information Sources in Engineering written by Charles Lord and published by Bloomsbury Publishing USA. This book was released on 2000-08-15 with total page 360 pages. Available in PDF, EPUB and Kindle. Book excerpt: The only source that focuses exclusively on engineering and technology, this important guide maps the dynamic and changing field of information sources published for engineers in recent years. Lord highlights basic perspectives, access tools, and English-language resources—directories, encyclopedias, yearbooks, dictionaries, databases, indexes, libraries, buyer's guides, Internet resources, and more. Substantial emphasis is placed on digital resources. The author also discusses how engineers and scientists use information, the culture and generation of scientific information, different types of engineering information, and the tools and resources you need to locate and access that material. Other sections describe regulations, standards and specifications, government resources, professional and trade associations, and education and career resources. Engineers, scientists, librarians, and other information professionals working with engineering and technology information will welcome this research

Download or read book Uhlig s Corrosion Handbook written by R. Winston Revie and published by John Wiley & Sons. This book was released on 2011-04-12 with total page 1299 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book serves as a reference for engineers, scientists, and students concerned with the use of materials in applications where reliability and resistance to corrosion are important. It updates the coverage of its predecessor, including coverage of: corrosion rates of steel in major river systems and atmospheric corrosion rates, the corrosion behavior of materials such as weathering steels and newer stainless alloys, and the corrosion behavior and engineering approaches to corrosion control for nonmetallic materials. New chapters include: high-temperature oxidation of metals and alloys, nanomaterials, and dental materials, anodic protection. Also featured are chapters dealing with standards for corrosion testing, microbiological corrosion, and electrochemical noise.

Download or read book Microbiologically Influenced Corrosion written by Brenda J. Little and published by John Wiley & Sons. This book was released on 2007-04-13 with total page 295 pages. Available in PDF, EPUB and Kindle. Book excerpt: A multi-disciplinary, multi-industry overview of microbiologically influenced corrosion, with strategies for diagnosis and control or prevention Microbiologically Influenced Corrosion helps engineers and scientists understand and combat the costly failures that occur due to microbiologically influenced corrosion (MIC). This book combines recent findings from diverse disciplines into one comprehensive reference. Complete with case histories from a variety of environments, it covers: Biofilm formation Causative organisms, relating bacteria and fungi to corrosion mechanisms for groups of metals Diagnosing and monitoring MIC Electrochemical techniques, with an overview of methods for detection of MIC The impact of alloying elements, including antimicrobial metals, and design features on MIC MIC of non-metallics Strategies for control or prevention of MIC, including engineering, chemical, and biological approaches This is a valuable, all-inclusive reference for corrosion scientists, engineers, and researchers, as well as designers, managers, and operators.

Download or read book LaQue s Handbook of Marine Corrosion written by David A. Shifler and published by John Wiley & Sons. This book was released on 2022-07-01 with total page 756 pages. Available in PDF, EPUB and Kindle. Book excerpt: The new edition of LaQue's classic text on marine corrosion, providing fully updated control engineering practices and applications Extensively updated throughout, the second edition of La Que's Handbook of Marine Corrosion remains the standard single-source reference on the unique nature of seawater as a corrosive environment. Designed to help readers reduce operational and life cycle costs for materials in marine environments, this authoritative resource provides clear guidance on design, materials selection, and implementation of corrosion control engineering practices for materials in atmospheric, immersion, or wetted marine environments. Completely rewritten for the 21st century, this new edition reflects current environmental regulations, best practices, materials, and processes, with special emphasis placed on the engineering, behavior, and practical applications of materials. Divided into three parts, the book first explains the fundamentals of corrosion in marine environments, including atmospheric corrosion, erosion, microbiological corrosion, fatigue, environmental cracking, and cathodic delamination. The second part discusses corrosion control methods and materials selection that can mitigate or eliminate corrosion in different marine environments. The third section provides the reader with specific applications of corrosion engineering to structures, systems, or components that exist in marine environments. This much-needed new edition: Presents a comprehensive and up-to-date account of the science and engineering aspects of marine corrosion Focuses on engineering aspects, descriptive behavior, and practical applications of materials usage in marine environments Addresses the various materials used in marine environments, including metals, polymers, alloys, coatings, and composites Incorporates current regulations, standards, and recommended practices of numerous organizations such as ASTM International, the US Navy, the American Bureau of Shipping, the International Organization for Standardization, and the International Maritime Organization Written in a clear and understandable style, La Que's Handbook of Marine Corrosion, Second Edition is an indispensable resource for engineers and materials scientists in disciplines spanning the naval, maritime, commercial, shipping industries, particularly corrosion engineers, ship designers, naval architects, marine engineers, oceanographers, and other professionals involved with products that operate in marine environments.

Download or read book Biofouling and Biocorrosion in Industrial Water Systems written by Hans-Curt Flemming and published by Springer Science & Business Media. This book was released on 2012-12-06 with total page 194 pages. Available in PDF, EPUB and Kindle. Book excerpt: Microbial growth and contamination ("Biofouling") in water systems represents a significant threat to the quality of waters produced for the microelectronic, pharmaceutical, petroleum, paper, food and other manufacturing industries. Biofouling can lead to biologically induced corrosion ("Biocorrosion"), which can cause severe damage to the equipment. Both biofouling and biocorrosion are frequently not recognized in time, underestimated, or linked with the wrong causes. The book represents a new approach by introducing biofilm properties and dynamics as basic principles of biofouling and biocorrosion, thus providing a better understanding and the means of fighting the undesired effects of biofilms. The most important features are: Case histories of biofouling in water treatment.- Detection and monitoring of biofouling.- Reverse osmosis membrane biofouling.- Biocide efficacy and biofouling control.- Plant design considerations for preventing biofouling.- Case histories of biocorrosion.- Detection, monitoring, control and prevention of biocorrosion.- Fundamentals of biofouling and biocorrosion mechanisms.

Download or read book Essentials of Flow Assurance Solids in Oil and Gas Operations written by Abdullah Hussein and published by Gulf Professional Publishing. This book was released on 2022-10-19 with total page 1124 pages. Available in PDF, EPUB and Kindle. Book excerpt: Flow assurance solids deposition is one of the main challenges in oil and gas production operations with millions of dollars spent annually on their mitigation. Essentials of Flow Assurance Solids in Oil and Gas Operations works as an all-inclusive reference for engineers and researchers, covering all the different types of solids that are commonly encountered in oil and gas fields. Structured to flow through real-world operations, the reference branches through each solid deposit problem where the root causes are as well as modeling, monitoring, characterization, and management strategies, all comprehensively reviewed in the light of contemporary research breakthroughs. Backed by several field case studies, Essentials of Flow Assurance Solids in Oil and Gas Operations gives petroleum and reservoir engineers a resource to correlate between the theoretical fundamentals and field practical applications allowing for sustainable and optimal operations. Provides the main operations of oil and gas fields, the characteristics of produced fluids, and the main flow assurance challenges Furnishes the basic principles of deposits formation and mitigation, starting with a full investigation of the problems, then mechanisms, causes, predictions, modelling, and sample analysis, followed by management Distinctively discusses the operational and environmental implications of flow assurance solids and their management using chemical and nonchemical methods Teaches engineers through impactful visuals and data sets included in every chapter

Download or read book MATERIAL SELECTION AND CORROSION Volume II written by and published by . This book was released on 2010-12-15 with total page 372 pages. Available in PDF, EPUB and Kindle. Book excerpt: These volumes are a component of Encyclopedia of Water Sciences, Engineering and Technology Resources in the global Encyclopedia of Life Support Systems (EOLSS), which is an integrated compendium of twenty one Encyclopedias. The books are concerned with the development and selection of the best possible material for a particular engineering task and the determination of the most effective method of producing the materials and the component. The complexity of modern processing and the need for efficient production and use of materials are discussed and illustrated by examples from current practice. Properties are determined by structure, which in turn depends on the processing route. Theses volumes are aimed at the following five major target audiences: University and College Students Educators, Professional Practitioners, Research Personnel and Policy and Decision Makers.

Download or read book Corrosion in the Petrochemical Industry Second Edition written by and published by ASM International. This book was released on 2015-12-01 with total page 426 pages. Available in PDF, EPUB and Kindle. Book excerpt: Originally published in 1994, this second edition of Corrosion in the Petrochemical Industry collects peer-reviewed articles written by experts in the field of corrosion that were specifically chosen for this book because of their relevance to the petrochemical industry. This edition expands coverage of the different forms of corrosion, including the effects of metallurgical variables on the corrosion of several alloys. It discusses protection methods, including discussion of corrosion inhibitors and corrosion resistance of aluminum, magnesium, stainless steels, and nickels. It also includes a section devoted specifically to petroleum and petrochemical industry related issues.

Download or read book Non Destructive Evaluation of Corrosion and Corrosion assisted Cracking written by Raman Singh and published by John Wiley & Sons. This book was released on 2019-03-08 with total page 447 pages. Available in PDF, EPUB and Kindle. Book excerpt: A comprehensive text to the non-destructive evaluation of degradation of materials due to environment that takes an interdisciplinary approach Non-Destructive Evaluation of Corrosion and Corrosion-assisted Cracking is an important resource that covers the critical interdisciplinary topic of non-destructive evaluation of degradation of materials due to environment. The authors—noted experts in the field—offer an overview of the wide-variety of approaches to non-destructive evaluation and various types of corrosion. The text is filled with instructive case studies from a range of industries including aerospace, energy, defense, and processing. The authors review the most common non-destructive evaluation techniques that are applied in both research and industry in order to evaluate the properties and more importantly degradation of materials components or systems without causing damage. Ultrasonic, radiographic, thermographic, electromagnetic, and optical are some of the methods explored in the book. This important text: Offers a groundbreaking interdisciplinary approach to of non-destructive evaluation of corrosion and corrosion-assisted cracking Discusses techniques for non-destructive evaluation and various types of corrosion Includes information on the application of a variety of techniques as well as specific case studies Contains information targeting industries such as aerospace, energy, processing Presents information from leading researchers and technologists in both non-destructive evaluation and corrosion Written for life assessment and maintenance personnel involved in quality control, failure analysis, and R&D, Non-Destructive Evaluation of Corrosion and Corrosion-assisted Cracking is an essential interdisciplinary guide to the topic.

Download or read book Corrosion and Materials in the Oil and Gas Industries written by Reza Javaherdashti and published by CRC Press. This book was released on 2016-04-19 with total page 715 pages. Available in PDF, EPUB and Kindle. Book excerpt: The advancement of methods and technologies in the oil and gas industries calls for new insight into the corrosion problems these industries face daily. With the application of more precise instruments and laboratory techniques as well as the development of new scientific paradigms, corrosion professionals are also witnessing a new era in the way d

Download or read book Petroleum Biotechnology written by Rafael Vazquez-Duhalt and published by Elsevier. This book was released on 2004-09-18 with total page 564 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book is one of a kind in the field of petroleum biorefining and biological upgrade of petroleum; it presents a critical review as well as an integrated overview of the potential biochemical processes, bridging the gap between academia and industry. It addresses today’s demanding production challenges, taking into account energy efficient and environmentally friendly processes, and also looks at the future possibility of implementing new refinery systems. Suitable for those practitioners the petroleum industry, students and researchers interested in petroleum biotechnology. * Covers a new application field for biotechnology * Looks at innovative processes for the petroleum industry * Presents examples of modern environmental processes