Download or read book Manganese in Powder Metallurgy Steels written by Andrej Šalak and published by Springer Science & Business Media. This book was released on 2012-07-13 with total page 488 pages. Available in PDF, EPUB and Kindle. Book excerpt: This work in three parts presents a summary of the sintered manganese steel properties from 1948 to 2011 involving processing conditions and other characteristics. In the first and third part are given results attained by the authors based on their finding that manganese (cheapest element) during sintering evaporates and by this the vapour cleans the sintering atmospheres from humidity. The second part presents other positive properties of manganese steels in spite of the doubt of oxidation of manganese during sintering and by this excluding the sintering manganese steels what hinderd the use of manganese in production of sintered parts. All results confirm that only manganese vapour according to finding of the authors ensures effective sintering of manganese steels and parts independently on the authors mind. It follows finally from the work that manganese is possible to use for alloying of powder steels sintered also in practice in H/N atmospheres with low purity and also in pure nitrogen - cheaper than hydrogen without some of the associated problems. Current trends in the field are also presented to the reader.
Download or read book Machinability of Powder Metallurgy Steels written by Andrej Šalak and published by Cambridge Int Science Publishing. This book was released on 2005 with total page 551 pages. Available in PDF, EPUB and Kindle. Book excerpt: The machinability of powder metallurgy steels is poorer compared with wrought steels of appropriate composition and/or mechanical [properties. The reason for it is a larger number of material and processing variables affecting the final properties of a sintered material. Therefore the machining of powder metallurgy (PM) steels is a permanent subject of investigation and practice. The aim of the book is to make on the basis of present knowledge an overview of all interacting factors in machining process including those applied for the improvement of the machinability. There are the properties of basic plain iron and alloyed powders, various additions, compaction and sintering conditions. Effect of porosity, individual alloying elements and microstructure character is considered. The description of the basic machining processes with their characteristics and with the characteristics of the tool geometry belongs to the mentioned factors. For the improvement of machinability of PM steels different machining aids, as S, MnS, MoS2 and other are frequently used and their chemical and physical characteristics are given. The effect of various machining aids used on machinability of sintered plain iron, iron-carbon and of steels alloyed with Cu, Ni, Mo, Cr, Mn including powder forged steels with very different mechanical properties and very different microstructures is analysed and summarized. The high-speed steel, hardmetal and other tools with their geometry as the part of the cutting process are described in relation to the sintered powder materials. The recommendations for machining of various steels enclose the present knowledge about the machinability of powder metallurgy steels.
Download or read book Ferrous Powder Metallurgy written by Andrej Šalak and published by Cambridge International Science Publishing. This book was released on 1995 with total page 478 pages. Available in PDF, EPUB and Kindle. Book excerpt: Because of the position of ferrous powder metallurgy, the author deals with the theoretical fundamentals and technical and technological aspects of the current state of knowledge in ferrous powder metallurgy so that special attention may be given to all factors influencing parts and materials with the required properties, form and dimensions, stressing their higher economic efficiency. The book also shows the extensive possibilities for further development of ferrous powder metallurgy and should therefore contribute to increasing the level of general and detailed knowledge of experts working in this area and should help in transition from fabrication of parts by conventional methods with all typical economic and ecological shortcomings to fabrication by powder metallurgy methods.
Download or read book Powder Metallurgy Stainless Steels written by Erhard Klar and published by ASM International. This book was released on 2007-01-01 with total page 247 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Advances in Powder Metallurgy written by Isaac Chang and published by Elsevier. This book was released on 2013-08-31 with total page 624 pages. Available in PDF, EPUB and Kindle. Book excerpt: Powder metallurgy (PM) is a popular metal forming technology used to produce dense and precision components. Different powder and component forming routes can be used to create an end product with specific properties for a particular application or industry. Advances in powder metallurgy explores a range of materials and techniques used for powder metallurgy and the use of this technology across a variety of application areas.Part one discusses the forming and shaping of metal powders and includes chapters on atomisation techniques, electrolysis and plasma synthesis of metallic nanopowders. Part two goes on to highlight specific materials and their properties including advanced powdered steel alloys, porous metals and titanium alloys. Part three reviews the manufacture and densification of PM components and explores joining techniques, process optimisation in powder component manufacturing and non-destructive evaluation of PM parts. Finally, part four focusses on the applications of PM in the automotive industry and the use of PM in the production of cutting tools and biomaterials.Advances in powder metallurgy is a standard reference for structural engineers and component manufacturers in the metal forming industry, professionals working in industries that use PM components and academics with a research interest in the field. - Discusses the forming and shaping of metal powders and includes chapters on atomisation techniques - Highlights specific materials and their properties including advanced powdered steel alloys, porous metals and titanium alloys - Reviews the manufacture and densification of PM components and explores joining techniques
Download or read book Application of Thermodynamics to Biological and Materials Science written by Mizutani Tadashi and published by BoD – Books on Demand. This book was released on 2011-01-14 with total page 644 pages. Available in PDF, EPUB and Kindle. Book excerpt: Progress of thermodynamics has been stimulated by the findings of a variety of fields of science and technology. The principles of thermodynamics are so general that the application is widespread to such fields as solid state physics, chemistry, biology, astronomical science, materials science, and chemical engineering. The contents of this book should be of help to many scientists and engineers.
Download or read book Applications and Non Metals written by D.M.R. Taplin and published by Elsevier. This book was released on 2013-10-22 with total page 800 pages. Available in PDF, EPUB and Kindle. Book excerpt: Advances in Research on the Strength and Fracture of Materials: Volume 3Bs—Applications and Non-Metals contains the proceedings of the Fourth International Conference on Fracture, held at the University of Waterloo, Canada, in June 1977. The papers review the state of the art with respect to testing of fracture in a wide range of non-metals such as ceramics, glass, composites, polymers, biomaterials, and concrete. This volume is divided into five sections and opens by discussing the role of acoustic emission in fracture toughness testing and the relation between static and dynamic fracture toughness of structural steels. The reader is then introduced to methods for determining stress-intensity factors of simplified geometries of structural parts; stress analysis of pressure vessels by thermal shock; the fracture toughness of constructional steels in cyclic loading; and fracture processes and fracture toughness in powder forged steels. The remaining chapters explore the influence of low-cycle damage on fracture toughness; fracture of structural alloys at temperatures approaching absolute zero; fracture mechanisms in Si-Al-O-N ceramics; propagation and bifurcation of cracks in quartz; and the effect of pressure and environment on the fracture and yield of polymers. This monograph will be a useful resource for metallurgists, materials scientists, and structural and mechanical engineers.
Download or read book Handbook of Residual Stress and Deformation of Steel written by George E. Totten and published by ASM International. This book was released on 2002 with total page 496 pages. Available in PDF, EPUB and Kindle. Book excerpt: Annotation Examines the factors that contribute to overall steel deformation problems. The 27 articles address the effect of materials and processing, the measurement and prediction of residual stress and distortion, and residual stress formation in the shaping of materials, during hardening processes, and during manufacturing processes. Some of the topics are the stability and relaxation behavior of macro and micro residual stresses, stress determination in coatings, the effects of process equipment design, the application of metallo- thermo-mechanic to quenching, inducing compressive stresses through controlled shot peening, and the origin and assessment of residual stresses during welding and brazing. Annotation c. Book News, Inc., Portland, OR (booknews.com)
Download or read book Issues in Metal Research 2011 Edition written by and published by ScholarlyEditions. This book was released on 2012-01-09 with total page 448 pages. Available in PDF, EPUB and Kindle. Book excerpt: Issues in Metal Research / 2011 Edition is a ScholarlyEditions™ eBook that delivers timely, authoritative, and comprehensive information about Metal Research. The editors have built Issues in Metal Research: 2011 Edition on the vast information databases of ScholarlyNews.™ You can expect the information about Metal Research in this eBook to be deeper than what you can access anywhere else, as well as consistently reliable, authoritative, informed, and relevant. The content of Issues in Metal Research / 2011 Edition has been produced by the world’s leading scientists, engineers, analysts, research institutions, and companies. All of the content is from peer-reviewed sources, and all of it is written, assembled, and edited by the editors at ScholarlyEditions™ and available exclusively from us. You now have a source you can cite with authority, confidence, and credibility. More information is available at http://www.ScholarlyEditions.com/.
Download or read book Proceedings of 2000 Powder Metallurgy World Congress written by Kōji Kosuge and published by . This book was released on 2000 with total page 992 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Nuclear Science Abstracts written by and published by . This book was released on 1974 with total page pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Thesaurus of Engineering and Scientific Terms written by Engineers Joint Council and published by . This book was released on 1967 with total page 708 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Woldman s Engineering Alloys written by John P. Frick and published by ASM International. This book was released on 2000-01-01 with total page 1369 pages. Available in PDF, EPUB and Kindle. Book excerpt: Annotation New edition of a reference that presents the values of properties typical for the most common alloy processing conditions, thus providing a starting point in the search for a suitable material that will allow, with proper use, all the necessary design limitations to be met (strength, toughness, corrosion resistance and electronic properties, etc.) The data is arranged alphabetically and contains information on the manufacturer, the properties of the alloy, and in some cases its use. The volume includes 32 tables that present such information as densities, chemical elements and symbols, physical constants, conversion factors, specification requirements, and compositions of various alloys and metals. Also contains a section on manufacturer listings with contact information. Edited by Frick, a professional engineering consultant. Annotation c. Book News, Inc., Portland, OR (booknews.com).
Download or read book Encyclopedia and Handbook of Materials Parts and Finishes written by Mel Schwartz and published by CRC Press. This book was released on 2016-07-06 with total page 1072 pages. Available in PDF, EPUB and Kindle. Book excerpt: A great deal of progress has been made in the development of materials, their application to structures, and their adaptation to a variety of systems and integrated across a wide range of industrial applications. This encyclopedia serves the rapidly expanding demand for information on technological developments. In addition to providing information
Download or read book Advances in Powder Metallurgy Particulate Materials written by and published by . This book was released on 2002 with total page 160 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Tool Steels 5th Edition written by George Adam Roberts and published by ASM International. This book was released on 1998 with total page 365 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Powder Metallurgy Alloys written by P. Ramakrishnan and published by CRC Press. This book was released on 2004-11-11 with total page 128 pages. Available in PDF, EPUB and Kindle. Book excerpt:
