Download or read book Managing Industrial Hazardous Waste A Practical Handbook written by Gary F. Lindgren and published by CRC Press. This book was released on 2018-01-18 with total page 403 pages. Available in PDF, EPUB and Kindle. Book excerpt: Here is your new handbook full of information and guidance necessary to understand and comply with the myriad and complex hazardous waste regulations. This handbook explains the regulations regarding identification and listing of hazardous wastes, walks the reader through the three determinations for all manufacturing firms, gives in-depth explanations of applicable standards, outlines the DOT standards applicable to shippers of hazardous wastes, presents a philosophical basis for corporate compliance, gives "how to" for actions and the paperwork necessary for such a program, and concludes with some practical information not commonly found in textbooks or regulations. This essential resource for personnel with waste management responsibilities at manufacturing firms should prove a valuable resource. This book will assist these practitioners in establishing or modifying regulatory compliance programs. This valuable new book helps you to reduce waste generation, segregate hazardous wastes, reuse on-site or off-site, recycle or reclaim, treat to reduce hazards, secure land disposal, follow regulatory standards, use best management practices, and establish or modify compliance programs.
Download or read book Waste Management Practices written by John Pichtel and published by CRC Press. This book was released on 2005-03-29 with total page 690 pages. Available in PDF, EPUB and Kindle. Book excerpt: A practical guide for the identification and management of a range of hazardous wastes, Waste Management Practices: Municipal, Hazardous, and Industrial integrates technical information including chemistry, microbiology, and engineering, with current regulations. Emphasizing basic environmental science and related technical fields, the book is an i
Download or read book Handbook of Hazardous Waste Management for Small Quantity Generators written by Russell W. Phifer and published by CRC Press. This book was released on 2020-08-26 with total page 218 pages. Available in PDF, EPUB and Kindle. Book excerpt: Special features of this book include: practical "how to" instructions, state/federal regulations-plus overview, lab waste management, interpretations of regulations, enforcement, generator checklist, and complete coverage. This handbook is an excellent resource for hazardous waste managers, safety managers, lab managers, occupational health/safety workers, hazardous waste brokers, and small business managers. Disposal facilities, trade associations, consultants, administrators, attorneys, unions, and industrial hygienists will find this practical guide useful as well.
Download or read book The Solid Waste Handbook written by William D. Robinson and published by John Wiley & Sons. This book was released on 1991-01-16 with total page 1330 pages. Available in PDF, EPUB and Kindle. Book excerpt: A comprehensive, single-source reference of current issues in solid waste management designed as an aid in decision-making and assessment of future trends. Covers public perceptions, legislation, regulation, planning and financing, and technologies and operation. Reviews the evolution of waste management since the passage of the Resource Conservation and Recovery Act of 1976, amended in 1978, 1980 and 1984. Examines common and divergent public and private concerns, including an in-depth review of public perceptions and their effect on planning and implementation. Also includes a discussion of the inadequacies of most waste quantity and composition estimates, with techniques for adequate evaluation. Looks at the misunderstanding and controversy over source separation and issues in municipal resource recovery from the viewpoint of the private scrap process industry. Also includes an unprecedented examination of the problem of bulky waste logistics and its effect on current disposal practice, and case histories and the current status of energy recovery from industrial waste. With over 500 tables, graphs, and illustrations.
Download or read book Handbook of Industrial and Hazardous Wastes Treatment written by Lawrence K. Wang and published by CRC Press. This book was released on 2004-06-29 with total page 1368 pages. Available in PDF, EPUB and Kindle. Book excerpt: Presenting effective, practicable strategies modeled from ultramodern technologies and framed by the critical insights of 78 field experts, this vastly expanded Second Edition offers 32 chapters of industry- and waste-specific analyses and treatment methods for industrial and hazardous waste materials-from explosive wastes to landfill leachate to w
Download or read book Strategies of Industrial and Hazardous Waste Management written by Nelson L. Nemerow and published by John Wiley & Sons. This book was released on 1998-03-09 with total page 770 pages. Available in PDF, EPUB and Kindle. Book excerpt: Strategies of Industrial and Hazardous Waste Management by Nelson L. Nemerow and Frank J. Agardy For years, plant engineers, engineering professors, municipal engineers, EPA personnel, and other professionals have relied on the expertise of these authors in the area of industrial and hazardous waste management. This book is full of new ideas, methods, models, data, updated information, and new case histories. This latest classic reference from Nelson Nemerow and Frank Agardy is by far the most comprehensive and useful source available on the generation, treatment, and disposal of all significant industrial and hazardous wastes. Strategies of Industrial and Hazardous Waste Management addresses the needs of its wide-ranging audience by dividing its coverage into four parts: Part I presents the basic information the industrial waste engineer needs to know about the environmental impact of various wastes, writing environmental impact statements, protecting streams from further pollution, calculating final treatments, testing treatment efficiency, and the influence of economic factors on waste treatment decisions. Part II explores theories and designs of waste treatment, and shows how waste can be reduced through proper operation of manufacturing plants. It ranges beyond the removal of suspended and colloidal solids to include coverage of neutralization, equalization and proportioning, removal of inorganic dissolved salts, and private contract collection and treatment. Also included is a novel paradigm for obtaining zero pollution in the future through environmentally balanced industrial complexes. Part III demonstrates waste management in action, using case studies from around the world to show theories and models successfully adapted and put into practice. All cases are based on the authors' actual experiences--the cases in Chapters 17, 19, 22, 23, and 24 have never been previously published. Part IV offers concise evaluations of all major liquid Industrial wastes, including their origins, characteristics, and acceptable treatments. Industries are classified into six categories: apparel, food processing, materials, chemicals, energy, and (in significantly extended coverage) non-point practices. Included are separate considerations of radioactive and hazardous (as opposed to conventional) waste. No waste-management professional should be without this essential volume. Focused on need-to-know information, common pitfalls, and practical solutions to all kinds of problems, Strategies of Industrial and Hazardous Waste Management is an answer source unlike any other.
Download or read book Handbook of Advanced Industrial and Hazardous Wastes Treatment written by Lawrence K. Wang and published by CRC Press. This book was released on 2009-11-04 with total page 1396 pages. Available in PDF, EPUB and Kindle. Book excerpt: Most industrial and hazardous waste management resources cover the major industries and provide conventional in-plant pollution control strategies. Until now however, no book or series of books has provided coverage that includes the latest developments in innovative and alternative environmental technology, design criteria, managerial decision met
Download or read book Hazardous Industrial Waste Treatment written by Lawrence K. Wang and published by CRC Press. This book was released on 2006-10-02 with total page 528 pages. Available in PDF, EPUB and Kindle. Book excerpt: Featuring chapters from the bestselling Handbook of Industrial and Hazardous Wastes Treatment, Second Edition, this resource presents valuable strategies culled from the latest technologies and keen insights of experts in the field. Hazardous Industrial Waste Treatment explains industry and waste-specific analyses and treatment methods for industrial and hazardous waste materials - from explosive wastes to landfill leachate to wastes produced by metal finishing, photographic, and timber processing. Additional information covers the means of monitoring waste on site, pollution, and site remediation, and includes a timely evaluation of the role of biotechnology in contemporary industrial waste management.
Download or read book A Practical Guide for Hazardous Waste Management Administration and Compliance written by James L. Lieberman and published by CRC Press. This book was released on 1994-09-27 with total page 260 pages. Available in PDF, EPUB and Kindle. Book excerpt: A Practical Guide for Hazardous Waste Management, Administration, and Compliance delivers in a concise fashion the information needed to establish, expand, administer, and audit a hazardous waste program. The presentation follows the logical steps necessary to establish a Resource Conservation and Recovery Act (RCRA) Waste Management Program. The book focuses primarily on large and medium quantity generators. No other book or manual addresses the corporate hazardous waste manager's responsibilities as clearly, providing chapter-by-chapter guidance for the execution of his or her responsibilities. The Guide includes chapters on subjects rarely discussed in other publications, such as waste profiling, facility permitting, preparation of a waste analysis plan, recordkeeping, and training programs. The book is clearly written with step-by-step instructions, including citations and forms. This excellent manual/textbook is indexed for easy reference and provides listings of additional subject area information sources.
Download or read book Hazardous Waste Management written by Cliff VanGuilder and published by Mercury Learning and Information. This book was released on 2018-03-06 with total page 292 pages. Available in PDF, EPUB and Kindle. Book excerpt: Assuming no previous knowledge, this second edition provides comprehensive coverage for a first course in hazardous waste management for civil, environmental engineers, and managers. The update includes material on the new USEPA revisions to the Solid and Hazardous Waste Regulations and the new e-Manifest Rule. It is written primarily for generators of hazardous waste with a primary emphasis on source reduction, waste minimization, reuse, and recycling before waste disposal. Numerous case studies from the field and clarification of regulations simplify this complex topic. The book provides guidance on how to determine the proper category of hazardous waste generators, with separate and distinct sets of requirements for the three different categories of generators, and gives basic supplemental guidance for transporters, storage, and disposal facilities. It covers proper completion of hazardous waste manifests and reports. The book explains record keeping, personnel training, and other requirements necessary to be in full compliance on inspections. A companion CD with regulatory forms, data is included. FEATURES: • Provides numerous, field case studies and clarification of new regulations to simplify this complex topic • Includes material on the new USEPA revisions to the Solid and Hazardous Waste Regulations and the new e-Manifest Rule • Covers all the major government regulations from inception to current practice • Explains record keeping, personnel training, and requirements necessary for full compliance on inspections • Includes companion CD with regulatory forms, data Selected Topics: Introductory history and overview of hazardous waste management laws, rules and regulations; a practical guide to complying with the regulations, including the identification of hazardous wastes; proper management of these wastes on-site; preparing generator annual reports, manifests, personnel safety training; hazardous waste management training for staff; proper record-keeping for future regulatory inspections.
Download or read book Waste Management Practices written by John Pichtel and published by CRC Press. This book was released on 2014-02-26 with total page 684 pages. Available in PDF, EPUB and Kindle. Book excerpt: Waste Management Practices: Municipal, Hazardous, and Industrial, Second Edition addresses the three main categories of wastes (hazardous, municipal, and "special" wastes) covered under federal regulation outlined in the Resource Conservation and Recovery Act (RCRA), an established framework for managing the generation, transportation, treatment, storage, and disposal of several forms of waste. Focusing on integrating the technical and regulatory complexities of waste management, this book covers the historical and regulatory development of waste management and the management of municipal solid wastes. It also addresses hazardous wastes and their management, from the perspectives of identification, transportation, and requirements for generators as well as the treatment, storage, and disposal facilities. Features: Covers the three main categories of wastes under regulation in the United States Incorporates an extensive set of problems, presented at the end of several chapters as appendices Includes numerous review/homework questions at the end of each chapter Highlights special categories of waste that may not fit precisely into either RCRA Subtitle D (Solid Wastes) or Subtitle C (Hazardous Wastes) In addition to the end-of-chapter problems provided in all chapters of this book, the text also contains practical exercises using data from field situations. Waste Management Practices: Municipal, Hazardous, and Industrial, Second Edition is an ideal textbook or reference guide for students and professionals involved in the management of all three categories of wastes.
Download or read book Industrial Waste Treatment Handbook written by Woodard & Curran, Inc. and published by Elsevier. This book was released on 2011-08-30 with total page 532 pages. Available in PDF, EPUB and Kindle. Book excerpt: Industrial Waste Treatment Handbook provides the most reliable methodology for identifying which waste types are produced from particular industrial processes and how they can be treated. There is a thorough explanation of the fundamental mechanisms by which pollutants become dissolved or become suspended in water or air. Building on this knowledge, the reader will learn how different treatment processes work, how they can be optimized, and the most efficient method for selecting candidate treatment processes. Utilizing the most up-to-date examples from recent work at one of the leading environmental and science consulting firms, this book also illustrates approaches to solve various environmental quality problems and the step-by-step design of facilities. Practical applications to assist with the selection of appropriate treatment technology for target pollutants Includes case studies based on current work by experts in waste treatment, disposal, management, environmental law and data management Provides glossary and table of acronyms for easy reference
Download or read book Laboratory Waste Management written by ACS Task Force on Laboratory and Chemical Waste Management, and published by OUP USA. This book was released on 2012-09-13 with total page 0 pages. Available in PDF, EPUB and Kindle. Book excerpt: Provides all levels of laboratory staff a guide for managing laboratory chemical wastes in compliance with federal and state environmental regulations
Download or read book Guide to Managing Industrial Hazardous Waste written by Gary F. Lindgren and published by Butterworth-Heinemann. This book was released on 1983 with total page 320 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Hazardous Waste Management written by Michael D. LaGrega and published by Waveland Press. This book was released on 2010-07-30 with total page 1231 pages. Available in PDF, EPUB and Kindle. Book excerpt: Hazardous waste management is a complex, interdisciplinary field that continues to grow and change as global conditions change. Mastering this evolving and multifaceted field of study requires knowledge of the sources and generation of hazardous wastes, the scientific and engineering principles necessary to eliminate the threats they pose to people and the environment, the laws regulating their disposal, and the best or most cost-effective methods for dealing with them. Written for students with some background in engineering, this comprehensive, highly acclaimed text does not only provide detailed instructions on how to solve hazardous waste problems but also guides students to think about ways to approach these problems. Each richly detailed, self-contained chapter ends with a set of discussion topics and problems. Case studies, with equations and design examples, are provided throughout the book to give students the chance to evaluate the effectiveness of different treatment and containment technologies.
Download or read book Handbook on Household Hazardous Waste written by Amy D. Cabaniss and published by Rowman & Littlefield. This book was released on 2018-08-10 with total page 346 pages. Available in PDF, EPUB and Kindle. Book excerpt: Written by leading practitioners, this updated edition looks at household hazardous waste and its collection/management, including chapters on planning a facility, marketing to affect behavior change, and encouraging extended product stewardship. Includes information on new regulations and advances and a comprehensive reference section.
Download or read book Handbook of Solid Waste Management written by George Tchobanoglous and published by McGraw Hill Professional. This book was released on 2002-07-13 with total page 834 pages. Available in PDF, EPUB and Kindle. Book excerpt: In a world where waste incinerators are not an option and landfills are at over capacity, cities are hard pressed to find a solution to the problem of what to do with their solid waste. Handbook of Solid Waste Management, 2/e offers a solution. This handbook offers an integrated approach to the planning, design, and management of economical and environmentally responsible solid waste disposal system. Let twenty industry and government experts provide you with the tools to design a solid waste management system capable of disposing of waste in a cost-efficient and environmentally responsible manner. Focusing on the six primary functions of an integrated system--source reduction, toxicity reduction, recycling and reuse, composting, waste- to-energy combustion, and landfilling--they explore each technology and examine its problems, costs, and legal and social ramifications.
