Download or read book Drilling Operations written by Ken Fraser and published by Air Science Company. This book was released on 1991 with total page 304 pages. Available in PDF, EPUB and Kindle. Book excerpt:

Download or read book Managing Drilling Operations written by Ken Fraser and published by . This book was released on 1991 with total page 264 pages. Available in PDF, EPUB and Kindle. Book excerpt:

Download or read book Macondo Well Deepwater Horizon Blowout written by National Research Council and published by National Academies Press. This book was released on 2012-03-02 with total page 236 pages. Available in PDF, EPUB and Kindle. Book excerpt: The blowout of the Macondo well on April 20, 2010, led to enormous consequences for the individuals involved in the drilling operations, and for their families. Eleven workers on the Deepwater Horizon drilling rig lost their lives and 16 others were seriously injured. There were also enormous consequences for the companies involved in the drilling operations, to the Gulf of Mexico environment, and to the economy of the region and beyond. The flow continued for nearly 3 months before the well could be completely killed, during which time, nearly 5 million barrels of oil spilled into the gulf. Macondo Well-Deepwater Horizon Blowout examines the causes of the blowout and provides a series of recommendations, for both the oil and gas industry and government regulators, intended to reduce the likelihood and impact of any future losses of well control during offshore drilling. According to this report, companies involved in offshore drilling should take a "system safety" approach to anticipating and managing possible dangers at every level of operation-from ensuring the integrity of wells to designing blowout preventers that function under all foreseeable conditions-in order to reduce the risk of another accident as catastrophic as the Deepwater Horizon explosion and oil spill. In addition, an enhanced regulatory approach should combine strong industry safety goals with mandatory oversight at critical points during drilling operations. Macondo Well-Deepwater Horizon Blowout discusses ultimate responsibility and accountability for well integrity and safety of offshore equipment, formal system safety education and training of personnel engaged in offshore drilling, and guidelines that should be established so that well designs incorporate protection against the various credible risks associated with the drilling and abandonment process. This book will be of interest to professionals in the oil and gas industry, government decision makers, environmental advocacy groups, and others who seek an understanding of the processes involved in order to ensure safety in undertakings of this nature.

Download or read book Managed Pressure Drilling written by Bill Rehm and published by Elsevier. This book was released on 2013-12-18 with total page 400 pages. Available in PDF, EPUB and Kindle. Book excerpt: With extraction out of depleted wells more important than ever, this new and developing technology is literally changing drilling engineering for future generations. Never before published in book form, these cutting-edge technologies and the processes that surround them are explained in easy-tounderstand language, complete with worked examples, problems and solutions. This volume is invaluable as a textbook for both the engineering student and the veteran engineer who needs to keep up with changing technology.

Download or read book Working Guide to Drilling Equipment and Operations written by William Lyons and published by Gulf Professional Publishing. This book was released on 2009-09-16 with total page 617 pages. Available in PDF, EPUB and Kindle. Book excerpt: Working Guide to Drilling Equipment and Operations offers a practical guide to drilling technologies and procedures. The book begins by introducing basic concepts such as the functions of drilling muds; types of drilling fluids; testing of drilling systems; and completion and workover fluids. This is followed by discussions of the composition of the drill string; air and gas drilling operations; and directional drilling. The book identifies the factors that should be considered for optimized drilling operations: health, safety, and environment; production capability; and drilling implementation. It explains how to control well pressure. It details the process of fishing, i.e. removal of a fish (part of the drill string that separates from the upper remaining portion of the drill string) or junk (small items of non-drillable metals) from the borehole. The remaining chapters cover the different types of casing and casing string design; well cementing; the proper design of tubing; and the environmental aspects of drilling. - Drilling and Production Hoisting Equipment - Hoisting Tool Inspection and Maintenance Procedures - Pump Performance Charts - Rotary Table and Bushings - Rig Maintenance of Drill Collars - Drilling Bits and Downhole Tools

Download or read book Drilling written by The Australian Drilling and published by CRC Press. This book was released on 1997-06-10 with total page 656 pages. Available in PDF, EPUB and Kindle. Book excerpt: Drilling: The Manual of Methods, Applications, and Management is all about drilling and its related geology, machinery, methods, applications, management, safety issues, and more. Of all the technologies employed by hydrologists, environmental engineers, and scientists interested in subsurface conditions, drilling is one of the most frequently used but most poorly understood. Now, for the first time, this industry-tested manual, developed by one of the world's leading authorities on drilling technology, is available to a worldwide audience.

Download or read book Managed Pressure Drilling written by Wilson C Chin and published by Gulf Professional Publishing. This book was released on 2012-01-25 with total page 409 pages. Available in PDF, EPUB and Kindle. Book excerpt: Managed Pressure Drilling Operations is a significant technology worldwide and beginning to make an impact all over the world. Often reservoir and drilling engineers are faced with the decision on how best to construct a well to exploit zones of interest while seeking to avoid drilling problems that contribute to reservoir damage or cause loss of hole. The decision to pursue a MPD operation is based on the intent of applying the most appropriate technology for the candidate and entails either an acceptance of influx to the surface or avoidance of influx into the wellbore.In today's exploration and production environment, drillers must now drill deeper, faster and into increasingly harsher environments where using conventional methods could be counter-productive at best and impossible at worst. Managed Pressure Drilling (MPD) is rapidly gaining popularity as a way to mitigate risks and costs associated with drilling in harsh environments. If done properly, MPD can improve economics for any well being drilled by reducing a rig's nonproductive time. Written for engineers, drilling managers, design departments, and operations personnel, Managed Pressure Drilling Modeling is based on the author's on experience and offers instruction on planning, designing and executing MPD projects. Compact and readable, the book provides a step by step methods for understanding and solve problems involving variables such as backpressure, variable fluid density, fluid rheology, circulating friction, hole geometry and drillstring diameter. All MPD variations are covered, including Constant Bottomhole Pressure, Pressurized MudCap Drilling and Dual Gradient Drilling. Case histories from actual projects are designed and analyzed using proprietary simulation software online.With this book in hand drilling professionals gain knowledge of the various variations involved in managed pressure drilling operations; understand the safety and operational aspects of a managed pressure drilling project; and be able to make an informed selection of all equipment required to carry out a managed pressure drilling operation. - Case histories from actual projects are designed and analyzed using proprietary simulation software online - Clearly explains the safety and operational aspects of a managed pressure drilling project - Expert coverage of the various variations involved in managed pressure drilling operations - Numerical tools and techniques needed for applying MPD principles and practices to individual projects

Download or read book Deepwater Drilling written by Peter Aird and published by Gulf Professional Publishing. This book was released on 2018-12-03 with total page 688 pages. Available in PDF, EPUB and Kindle. Book excerpt: Deepwater Drilling: Well Planning, Design, Engineering, Operations, and Technology Application presents necessary coverage on drilling engineering and well construction through the entire lifecycle process of deepwater wells. Authored by an expert with real-world experience, this book delivers illustrations and practical examples throughout to keep engineers up-to-speed and relevant in today's offshore technology. Starting with pre-planning stages, this reference dives into the rig's elaborate rig and equipment systems, including ROVs, rig inspection and auditing procedures. Moving on, critical drilling guidelines are covered, such as production casing, data acquisition and well control. Final sections cover managed pressure drilling, top and surface hole 'riserless' drilling, and decommissioning. Containing practical guidance and test questions, this book presents a long-awaited resource for today's offshore engineers and managers. - Helps readers gain practical experience from an author with over 35 years of offshore field know-how - Presents offshore drilling operational best practices and tactics on well integrity for the entire lifecycle of deepwater wells - Covers operations and personnel, from emergency response management, to drilling program outlines

Download or read book Hydrate Control in Drilling Mud written by Bhajan Lal and published by Springer Nature. This book was released on 2022-02-03 with total page 129 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book provides pathways and strategies for mud engineers and drilling students in the future drilling industry. The data on the effect of drilling mud additives on hydrate formation thermodynamics and kinetics are discussed to aid proper additives selection and blending for optimum performance. Practical field operations of hydrate-related drilling are discussed with insights on future drilling operations. Preface Drilling fluid design is very crucial in all drilling operations. Gas hydrate wells or hydrate sediments are future reservoirs that are believed to produced clean natural gas that will replace the current fossil fuels. Hydrate management has now become a part of the drilling operation and for that matter, relevant knowledge and guidelines of drilling fluid design for hydrate management in drilling-related operations would help establish a strong foundation for hydrate-related drilling operations. This book is useful to mud engineers, students, and industries who wish to be drilling fluid authorities in the21st-century energy production industry.

Download or read book Australian Drillers Guide Volume Five Managing Drilling Operations written by and published by . This book was released on 1983 with total page 288 pages. Available in PDF, EPUB and Kindle. Book excerpt:

Download or read book An Introduction to Well Control Calculations for Drilling Operations written by Dave Cormack and published by Springer. This book was released on 2017-08-10 with total page 304 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book removes the mystery and pressure from calculations by equipping readers with the tools they need to understand calculations and how they work. This is done by using straight-forward language and showing fully worked out, rig-based examples throughout. The book comprises of mini lessons which are never more than two pages long and a complete lesson is always in view when the book is open in front of you. Lessons progress in a logical manner and once the book is finished, the reader is ready for any calculations that could be encountered at well control school. It is a great tool for rig crew members who are afraid of calculations or have not done any math since school. I found it easy to follow with clear explanations and it flowed from topic to topic. A definite addition to the rig crews training toolbox. Malcolm Lodge (at the time of writing Technical Director of the Well Control Institute)

Download or read book The Drilling Manual written by Australian Drilling Industry Training Committee Limited and published by CRC Press. This book was released on 2015-04-01 with total page 739 pages. Available in PDF, EPUB and Kindle. Book excerpt: An Invaluable Reference for Members of the Drilling Industry, from Owner–Operators to Large Contractors, and Anyone Interested In Drilling Developed by one of the world’s leading authorities on drilling technology, the fifth edition of The Drilling Manual draws on industry expertise to provide the latest drilling methods, safety, risk management, and management practices, and protocols. Utilizing state-of-the-art technology and techniques, this edition thoroughly updates the fourth edition and introduces entirely new topics. It includes new coverage on occupational health and safety, adds new sections on coal seam gas, sonic and coil tube drilling, sonic drilling, Dutch cone probing, in hole water or mud hammer drilling, pile top drilling, types of grouting, and improved sections on drilling equipment and maintenance. New sections on drilling applications include underground blast hole drilling, coal seam gas drilling (including well control), trenchless technology and geothermal drilling. It contains heavily illustrated chapters that clearly convey the material. This manual incorporates forward-thinking technology and details good industry practice for the following sectors of the drilling industry: Blast Hole Environmental Foundation/Construction Geotechnical Geothermal Mineral Exploration Mineral Production and Development Oil and Gas: On-shore Seismic Trenchless Technology Water Well The Drilling Manual, Fifth Edition provides you with the most thorough information about the "what," "how," and "why" of drilling. An ideal resource for drilling personnel, hydrologists, environmental engineers, and scientists interested in subsurface conditions, it covers drilling machinery, methods, applications, management, safety, geology, and other related issues.

Download or read book Drilling Operations Cost and Risk Management written by Prosper Aideyan and published by . This book was released on 2015-05-29 with total page pages. Available in PDF, EPUB and Kindle. Book excerpt: Every activity or operation in well construction has its own associated risk(s). The cost of running the operation will most certainly be impacted by the level of risk that can be taken for that particular operation. Typically, the running of an operation costs less if the level of risk associated with it is high, and it is higher if the level of risk is lower. However, any safety incidents arising out of high-risk operations could potentially lead to catastrophic damage, which in-turn may raise the overall cost of running the operation immensely. Therefore it is important to identify all risks associated with any operation during well construction and to determine what level of risk is acceptable and to what extent. Risk management is the economics of finding a suitable balance between running an operation by rejecting and accepting various risks; developing barriers for acceptable risks and making a profit while running a safe operation.

Download or read book Drilling Fluids Processing Handbook written by ASME Shale Shaker ASME Shale Shaker Committee and published by Elsevier. This book was released on 2011-03-15 with total page 693 pages. Available in PDF, EPUB and Kindle. Book excerpt: Written by the Shale Shaker Committee of the American Society of Mechanical Engineers, originally of the American Association of Drilling Engineers, the authors of this book are some of the most well-respected names in the world for drilling. The first edition, Shale Shakers and Drilling Fluid Systems, was only on shale shakers, a very important piece of machinery on a drilling rig that removes drill cuttings. The original book has been much expanded to include many other aspects of drilling solids control, including chapters on drilling fluids, cut-point curves, mud cleaners, and many other pieces of equipment that were not covered in the original book. - Written by a team of more than 20 of the world's foremost drilling experts, from such companies as Shell, Conoco, Amoco, and BP - There has never been a book that pulls together such a vast array of materials and depth of topic coverage in the area of drilling fluids - Covers quickly changing technology that updates the drilling engineer on all of the latest equipment, fluids, and techniques

Download or read book An Evaluation of Industry Safety Management in Eastern Canada Offshore Drilling Operations microform written by Manadrill Drilling Management Inc and published by . This book was released on 1984 with total page 142 pages. Available in PDF, EPUB and Kindle. Book excerpt:

Download or read book Advances in Oil and Gas Well Engineering written by Yongcun Feng and published by BoD – Books on Demand. This book was released on 2024-03-13 with total page 178 pages. Available in PDF, EPUB and Kindle. Book excerpt: Worldwide oil and gas development has shifted from conventional reservoirs to unconventional and deepwater reservoirs, characterized by high pressure, high temperature, ultra-low permeability, and extensively developed natural fractures. This transition to increasingly hostile environments introduces new challenges in well drilling and completion, such as downhole drilling issues, formation damage, and reduced productivity. Aiming to solve the challenges, drilling and completion technologies have excelled greatly in the past two decades. This book covers managed pressure drilling (MPD), the role of artificial intelligence (AI) in refining drilling processes, and the transformative effects of digitalization and automation. Emphasizing efficiency, safety, and environmental responsibility, the book also integrates methods like casing while drilling for improved efficiency, advanced diagnostics for rig safety, stabilization techniques for wellbores in fractured reservoirs, cement sheath integrity maintenance, and the optimization of continuous gas lift. Bridging theoretical concepts with practical applications, the narrative offers insights into both operational techniques and safety strategies, drawing from past experiences. The current state-of-the-art theories, technologies, and practices are covered, bridging the gaps between fundamental theories and engineering applications.

Download or read book Managed Pressure Drilling written by Lalit Verma and published by . This book was released on 2015-08 with total page 0 pages. Available in PDF, EPUB and Kindle. Book excerpt: Managed Pressure Drilling Operations is a significant technology worldwide and beginning to make an impact all over the world. Often reservoir and drilling engineers are faced with the decision on how best to construct a well to exploit zones of interest while seeking to avoid drilling problems that contribute to reservoir damage or cause loss of hole. The decision to pursue a MPD operation is based on the intent of applying the most appropriate technology for the candidate and entails either an acceptance of influx to the surface or avoidance of influx into the wellbore. In today's exploration and production environment, drillers must now drill deeper, faster and into increasingly harsher environments where using conventional methods could be counter-productive at best and impossible at worst. Managed Pressure Drilling (MPD) is rapidly gaining popularity as a way to mitigate risks and costs associated with drilling in harsh environments. With this book in hand drilling professionals gain knowledge of the various variations involved in managed pressure drilling operations; understand the safety and operational aspects of a managed pressure drilling project; and be able to make an informed selection of all equipment required to carry out a managed pressure drilling operation.