Download or read book Prudent Practices in the Laboratory written by National Research Council and published by National Academies Press. This book was released on 2011-03-25 with total page 360 pages. Available in PDF, EPUB and Kindle. Book excerpt: Prudent Practices in the Laboratory-the book that has served for decades as the standard for chemical laboratory safety practice-now features updates and new topics. This revised edition has an expanded chapter on chemical management and delves into new areas, such as nanotechnology, laboratory security, and emergency planning. Developed by experts from academia and industry, with specialties in such areas as chemical sciences, pollution prevention, and laboratory safety, Prudent Practices in the Laboratory provides guidance on planning procedures for the handling, storage, and disposal of chemicals. The book offers prudent practices designed to promote safety and includes practical information on assessing hazards, managing chemicals, disposing of wastes, and more. Prudent Practices in the Laboratory will continue to serve as the leading source of chemical safety guidelines for people working with laboratory chemicals: research chemists, technicians, safety officers, educators, and students.
Download or read book Chemical Laboratory Safety and Security written by National Academies of Sciences, Engineering, and Medicine and published by National Academies Press. This book was released on 2016-08-07 with total page 117 pages. Available in PDF, EPUB and Kindle. Book excerpt: The U.S. Department of State charged the Academies with the task of producing a protocol for development of standard operating procedures (SOPs) that would serve as a complement to the Chemical Laboratory Safety and Security: A Guide to Prudent Chemical Management and be included with the other materials in the 2010 toolkit. To accomplish this task, a committee with experience and knowledge in good chemical safety and security practices in academic and industrial laboratories with awareness of international standards and regulations was formed. The hope is that this toolkit expansion product will enhance the use of the previous reference book and the accompanying toolkit, especially in developing countries where safety resources are scarce and experience of operators and end-users may be limited.
Download or read book Chemical Risk Assessment written by Peter Fisk and published by John Wiley & Sons. This book was released on 2014-01-28 with total page 0 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book is an essential guide and support to understanding of the science and policy, procedure and practice that underpins the REACH risk assessments required for the use and placing on the market of chemicals in the European Union. A clear understanding of information provision and how this affects the assessment of chemical safety is fundamentally important to the success of policy on chemicals and ultimately to the sustainability of the chemicals industry. Within the book, the scientific processes that underpin the policy are explained in a practical way. Importantly, it includes coverage of techniques to help solve the problems of using potentially risky and hazardous chemicals through the use of less hazardous alternatives and ‘green chemistry’, and also the analysis of the risks of the use of the most hazardous substances against the social and economic benefits of use. Chemical Risk Assessment: A Manual for REACH covers the following main themes: i) Assessment of chemical risk; ii) Risk management; iii) Hazard reduction, substitution and green chemistry; iv) Risk versus benefit – socio-economic analysis. The book acts as a practical guide and overview to chemicals risk assessment and risk management (in the EU context), as well as a support text for planning for the challenges of the future, which will see ever-increasing pressure to withdraw hazardous substances from the EU (and global) market, balanced against opportunities for innovation in the development of less hazardous chemicals.
Download or read book Chemical Risk Analysis written by Bernard Martel and published by Butterworth-Heinemann. This book was released on 2004-07-01 with total page 529 pages. Available in PDF, EPUB and Kindle. Book excerpt: This handbook includes the principal methodological tools and data required to comprehend, evaluate and execute analysis of chemical risk in practical working situations. The dangerous property tables providing data on more than 1900 products, organic and inorganic, will be extremely useful to all readers working in the chemical and process industries and for those with occupational safety and health responsibilities. These tables are supplemented through the text by numerous figures and other tables, helping make this publication both comprehensive and accessible. · Now in an updated paperback edition · Numerous tables containing information on more than 1900 chemicals, organic and inorganic · Updating supplement by leading industry specialist on latest EC regulations regarding hazardous chemicals
Download or read book Niosh Pocket Guide to Chemical Hazards written by Niosh and published by www.Militarybookshop.CompanyUK. This book was released on 2012-06-01 with total page 456 pages. Available in PDF, EPUB and Kindle. Book excerpt: The NIOSH Pocket Guide to Chemical Hazards presents information taken from the NIOSH/OSHA Occupational Health Guidelines for Chemical Hazards, from National Institute for Occupational Safety and Health (NIOSH) criteria documents and Current Intelligence Bulletins, and from recognized references in the fields of industrial hygiene, occupational medicine, toxicology, and analytical chemistry. The information is presented in tabular form to provide a quick, convenient source of information on general industrial hygiene practices. The information in the Pocket Guide includes chemical structures or formulas, identification codes, synonyms, exposure limits, chemical and physical properties, incompatibilities and reactivities, measurement methods, respirator selections, signs and symptoms of exposure, and procedures for emergency treatment.
Download or read book Risk Assessment and Risk Management for the Chemical Process Industry written by Stone & Webster Engineering Corporation and published by John Wiley & Sons. This book was released on 1991-09-03 with total page 398 pages. Available in PDF, EPUB and Kindle. Book excerpt: The tragic incident at Bhopal, India made it clear that safetyreviews for identification and control of accidents involving toxicchemicals must be more systematic. This guide shows how tointegrate hazard identification, risk assessment, consequenceanalysis, and risk mitigation into a formalized program forhandling hazardous chemicals. Most of the 21 contributors aresenior staff members at Stone & Webster EngineeringCorporation. They discuss how to perform and supervise safetystudies for chemical, petrochemical, petroleum refining, and otherfacilities. They discuss all aspects of detection, prevention, andmitigation of risks associated with processing, handling, andproduction of hazardous chemicals. Special attention is given tohazard identification and hazard assessment techniques ranging fromsimple screening checklists to highly structured Hazard andOperability (HAZOP) analysis. You're shown how to calculatepotential consequences of identified hazards, quantify thelikelihood of these events, and combine equipment failure rate dataand human reliability analysis with hazard assessment. You'll alsobenefit from the book's rundowns of how to * apply expert systems and artificial intelligence in riskmanagement * instill safety-oriented operating and maintenanceprocedures * train operators and emergency response personnel * conduct internal and external safety audits * perform chemical dispersion, explosion, and fire analyses * assess health effects from chemical releases * use insurance vehicles to deal with residual risk. Risk Assessment and Risk Management for the Chemical ProcessIndustry is an essential source on minimizing the dangers of toxicincidents and accidents. It is essential reading for safetyengineers, regulatory managers, environmental engineers, and otherprofessionals responsible for safety in chemical plants.
Download or read book Prudent Practices in the Laboratory written by National Research Council and published by National Academies Press. This book was released on 1995-09-16 with total page 450 pages. Available in PDF, EPUB and Kindle. Book excerpt: This volume updates and combines two National Academy Press bestsellers--Prudent Practices for Handling Hazardous Chemicals in Laboratories and Prudent Practices for Disposal of Chemicals from Laboratories--which have served for more than a decade as leading sources of chemical safety guidelines for the laboratory. Developed by experts from academia and industry, with specialties in such areas as chemical sciences, pollution prevention, and laboratory safety, Prudent Practices for Safety in Laboratories provides step-by-step planning procedures for handling, storage, and disposal of chemicals. The volume explores the current culture of laboratory safety and provides an updated guide to federal regulations. Organized around a recommended workflow protocol for experiments, the book offers prudent practices designed to promote safety and it includes practical information on assessing hazards, managing chemicals, disposing of wastes, and more. Prudent Practices for Safety in Laboratories is essential reading for people working with laboratory chemicals: research chemists, technicians, safety officers, chemistry educators, and students.
Download or read book Safety in the Use of Chemicals at Work written by International Labour Office and published by International Labour Organization. This book was released on 1993 with total page 116 pages. Available in PDF, EPUB and Kindle. Book excerpt: This code of practice provides guidance on extablishing a systematic approach to safety in the use of chemicals at work. Intended for all those engaged in framing provisions, its recommendations are designed to ensure an efficient flow of information from manufacturers to users.
Download or read book Risk Assessment of Chemicals An Introduction written by C.J. van Leeuwen and published by Springer Science & Business Media. This book was released on 2007-09-18 with total page 706 pages. Available in PDF, EPUB and Kindle. Book excerpt: At last – a second edition of this hugely important text that reflects the progress and experience gained in the last decade and aims at providing background and training material for a new generation of risk assessors. The authors offer an introduction to risk assessment of chemicals as well as basic background information on sources, emissions, distribution and fate processes for the estimation of exposure of plant and animal species in the environment and humans exposed via the environment, consumer products, and at the workplace. The coverage describes the basic principles and methods of risk assessment within their legislative frameworks (EU, USA, Japan and Canada).
Download or read book Guidelines for Risk Based Process Safety written by CCPS (Center for Chemical Process Safety) and published by John Wiley & Sons. This book was released on 2011-11-30 with total page 759 pages. Available in PDF, EPUB and Kindle. Book excerpt: Guidelines for Risk Based Process Safety provides guidelines for industries that manufacture, consume, or handle chemicals, by focusing on new ways to design, correct, or improve process safety management practices. This new framework for thinking about process safety builds upon the original process safety management ideas published in the early 1990s, integrates industry lessons learned over the intervening years, utilizes applicable "total quality" principles (i.e., plan, do, check, act), and organizes it in a way that will be useful to all organizations - even those with relatively lower hazard activities - throughout the life-cycle of a company.
Download or read book Sittig s Handbook of Toxic and Hazardous Chemicals and Carcinogens written by Richard P. Pohanish and published by William Andrew. This book was released on 2008-01-10 with total page 2888 pages. Available in PDF, EPUB and Kindle. Book excerpt: For more than a quarter century, Sittig's Handbook of Toxic and Hazardous Chemicals and Carcinogens has proven to be among the most reliable, easy-to-use and essential reference works on hazardous materials. Sittig's 5th Edition remains the lone comprehensive work providing a vast array of critical information on the 2,100 most heavily used, transported, and regulated chemical substances of both occupational and environmental concern.Information is the most vital resource anyone can have when dealing with potential hazardous substance accidents or acts of terror. Sittig's provides extensive data for each of the 2,100 chemicals in a uniform format, enabling fast and accurate decisions in any situation. The chemicals are presented alphabetically and classified as a carcinogen, hazardous substance, hazardous waste, or toxic pollutant. This new edition contains extensively expanded information in all 28 fields for each chemical (see table of contents) and has been updated to keep pace with world events. Chemicals classified as WMD have been included in the new edition as has more information frequently queried by first responders and frontline industrial safety personnel.*Includes and references European chemical identifiers and regulations.*The only single source reference that provides such in-depth information for each chemical.*The two volume set is designed for fast and accurate decision making in any situation.
Download or read book Bow Ties in Risk Management written by CCPS (Center for Chemical Process Safety) and published by John Wiley & Sons. This book was released on 2018-10-09 with total page 224 pages. Available in PDF, EPUB and Kindle. Book excerpt: AN AUTHORITATIVE GUIDE THAT EXPLAINS THE EFFECTIVENESS AND IMPLEMENTATION OF BOW TIE ANALYSIS, A QUALITATIVE RISK ASSESSMENT AND BARRIER MANAGEMENT METHODOLOGY From a collaborative effort of the Center for Chemical Process Safety (CCPS) and the Energy Institute (EI) comes an invaluable book that puts the focus on a specific qualitative risk management methodology – bow tie barrier analysis. The book contains practical advice for conducting an effective bow tie analysis and offers guidance for creating bow tie diagrams for process safety and risk management. Bow Ties in Risk Management clearly shows how bow tie analysis and diagrams fit into an overall process safety and risk management framework. Implementing the methods outlined in this book will improve the quality of bow tie analysis and bow tie diagrams across an organization and the industry. This important guide: Explains the proven concept of bow tie barrier analysis for the preventing and mitigation of incident pathways, especially related to major accidents Shows how to avoid common pitfalls and is filled with real-world examples Explains the practical application of the bow tie method throughout an organization Reveals how to treat human and organizational factors in a sound and practical manner Includes additional material available online Although this book is written primarily for anyone involved with or responsible for managing process safety risks, this book is applicable to anyone using bow tie risk management practices in other safety and environmental or Enterprise Risk Management applications. It is designed for a wide audience, from beginners with little to no background in barrier management, to experienced professionals who may already be familiar with bow ties, their elements, the methodology, and their relation to risk management. The missions of both the CCPS and EI include developing and disseminating knowledge, skills, and good practices to protect people, property and the environment by bringing the best knowledge and practices to industry, academia, governments and the public around the world through collective wisdom, tools, training and expertise. The CCPS has been at the forefront of documenting and sharing important process safety risk assessment methodologies for more than 30 years. The EI's Technical Work Program addresses the depth and breadth of the energy sector, from fuels and fuels distribution to health and safety, sustainability and the environment. The EI program provides cost-effective, value-adding knowledge on key current and future international issues affecting those in the energy sector.
Download or read book Emergency Response and Hazardous Chemical Management written by Clyde B. Strong and published by CRC Press. This book was released on 2013-11-19 with total page 247 pages. Available in PDF, EPUB and Kindle. Book excerpt: Management of hazardous chemicals and materials-particularly during emergency release situations-is a critical part of routine training required for workers and professionals in the chemical, petroleum and manufacturing industries. Proper storage of highly reactive chemical agents, correct choice of protective clothing and safety issues in confined
Download or read book Identifying and Reducing Environmental Health Risks of Chemicals in Our Society written by Robert Pool and published by . This book was released on 2014 with total page 0 pages. Available in PDF, EPUB and Kindle. Book excerpt: "On November 7-8, 2013, the Institute of Medicine's Roundtable on Environmental Health Sciences, Research, and Medicine held a workshop to discuss approaches related to identifying and reducing potential environmental public health risks to new and existing industrial chemicals present in society. Industrial chemicals include chemicals used in industrial processes or commercial products, not including those found in food, pesticides, or pharmaceuticals. Identifying and Reducing Environmental Health Risks of Chemicals in Our Society is a summary and synthesis of the presentations and discussions that took place during the two days of the workshop. The workshop examined successes and areas for improvement within current regulatory programs for assessing industrial chemical safety, frameworks for chemical prioritization to inform targeted testing and risk management strategies, concepts of sustainability and green chemistry that support the design and use of safer alternatives, and efforts to reduce the risk of chemicals in our society."--Publisher's description.
Download or read book Risk Assessment Methods for Biological and Chemical Hazards in Food written by Fernando Pérez-Rodríguez and published by CRC Press. This book was released on 2020-10-28 with total page 547 pages. Available in PDF, EPUB and Kindle. Book excerpt: Risk assessment has been extensively developed in several scientific fields, such as environmental science, economics, and civil engineering, among others. In the aftermath of the SPS and GATT agreements on the use of risk analysis framework in food trade, signed in the 1990s, international organisations and governments adopted risk assessment as a science-based process to ensure food safety along the food chain. The food industry can also benefit from the use of this approach for food process optimisation and quality assurance. Risk Assessment Methods for Biological and Chemical Hazards in Food introduces the reader to quantitative risk assessment methods encompassing general concepts to specific applications to biological and chemical hazards in foods. In the first section, the book presents food risk assessment as methodology and addresses, more specifically, new trends and approaches such as the development of risk rating methods, risk metrics, risk-benefit assessment studies and quality assessment methods. Section II is dedicated to biological hazards. This section identifies the most relevant biological hazards along the food chain and provides an overview on the types of predictive microbiology models used to describe the microbial response along the food chain. Chapter 12 specifically deals with cross contamination and the quantitative methods that can be applied to describe this relevant microbial process. The development and application of dose-response models (i.e. mathematical function describing the relationship between pathogen dose and health response) are also covered in this section. In Section III, the book translates risk assessment concepts into the area of chemical hazards, defining the process steps to determine chemical risk and describing the uncertainty and variability sources associated with chemicals. Key Features: Presents new trends and approaches in the field of risk assessment in foods Risk assessment concepts are illustrated by practical examples in the food sector Discusses how quantitative information and models are integrated in a quantitative risk asssment framework Provides examples of applications of quantitative chemical risk assessment in risk management The book, written by renowned experts in their field, is a comprehensive collection of quantitative methods and approaches applied to risk assessment in foods. It can be used as an extensive guide for food safety practitioners and researchers to perform quantitative risk assessment in foods
Download or read book Guidelines for Analyzing and Managing the Security Vulnerabilities of Fixed Chemical Sites written by CCPS (Center for Chemical Process Safety) and published by John Wiley & Sons. This book was released on 2010-08-13 with total page 242 pages. Available in PDF, EPUB and Kindle. Book excerpt: This new initiative demonstrates a process and tools for managing the security vulnerability of sites that produce and handle chemicals, petroleum products, pharmaceuticals, and related materials such as fertilizers and water treatment chemicals. Includes: enterprise screening; site screening; protection analysis; security vulnerability assessment; action planning and tracking.
Download or read book Regulating Chemical Risks written by Johan Eriksson and published by Springer Science & Business Media. This book was released on 2010-08-18 with total page 347 pages. Available in PDF, EPUB and Kindle. Book excerpt: This volume presents research on current trends in chemical regulations – a fa- growing, complex, and increasingly internationalized field. The book grew out from a multidisciplinary research project entitled ‘Regulating Chemical Risks in the Baltic Sea Area: Science, Politics, and the Media’, led by Michael Gilek at Södertörn University, Sweden. This research project involved scholars and experts from natural as well as social sciences, based at Södertörn University, Swedish Royal Institute of Technology (KTH), Karolinska Institutet, and Umeå University. The project group organized a multidisciplinary research conference on chemical risk regulations, held in Stockholm, August 15–17, 2007. Most of the contributions published in this book were, in draft form, first presented at this conference. The conference, like the ensuing edited volume, expanded the geographical focus beyond the Baltic Sea area to include wider European, and to some extent also global trends. Many thanks to all project colleagues and conference participants! We are very grateful for the generous financial support received from The Foundation for Baltic and East European Studies (Östersjöstiftelsen), The Swedish Research Council Formas, and from Södertörn University. Without this support the present book would not have been possible. Special thanks to all of our fellow contributors, all of whom have submitted to- cal papers based on high-quality research. Many thanks also to Tobias Evers, who assisted us with technical editing. Finally, we are grateful for the professionalism shown by our editors at Springer.
