Download or read book Advanced Manufacturing written by William B. Bonvillian and published by MIT Press. This book was released on 2023-12-05 with total page 417 pages. Available in PDF, EPUB and Kindle. Book excerpt: How to rethink innovation and revitalize America's declining manufacturing sector by encouraging advanced manufacturing, bringing innovative technologies into the production process. The United States lost almost one-third of its manufacturing jobs between 2000 and 2010. As higher-paying manufacturing jobs are replaced by lower-paying service jobs, income inequality has been approaching third world levels. In particular, between 1990 and 2013, the median income of men without high school diplomas fell by an astonishing 20% between 1990 and 2013, and that of men with high school diplomas or some college fell by a painful 13%. Innovation has been left largely to software and IT startups, and increasingly U.S. firms operate on a system of “innovate here/produce there,” leaving the manufacturing sector behind. In this book, William Bonvillian and Peter Singer explore how to rethink innovation and revitalize America's declining manufacturing sector. They argue that advanced manufacturing, which employs such innovative technologies as 3-D printing, advanced material, photonics, and robotics in the production process, is the key. Bonvillian and Singer discuss transformative new production paradigms that could drive up efficiency and drive down costs, describe the new processes and business models that must accompany them, and explore alternative funding methods for startups that must manufacture. They examine the varied attitudes of mainstream economics toward manufacturing, the post-Great Recession policy focus on advanced manufacturing, and lessons from the new advanced manufacturing institutes. They consider the problem of “startup scaleup,” possible new models for training workers, and the role of manufacturing in addressing “secular stagnation” in innovation, growth, the middle classes, productivity rates, and related investment. As recent political turmoil shows, the stakes could not be higher.

Download or read book Organization and Management of Advanced Manufacturing written by Waldemar Karwowski and published by John Wiley & Sons. This book was released on 1994-03-31 with total page 452 pages. Available in PDF, EPUB and Kindle. Book excerpt: Takes into account the effective use of human factors issues in advanced manufacturing which would make the difference between the failure or success of industrial corporations. International authorities describe how to implement methods and techniques, applicable on a global basis, into manufacturing and process industries where change is being brought about as they move to concurrent engineering formats of operation.

Download or read book Management of Advanced Manufacturing Technology written by Donald Gerwin and published by Wiley-Interscience. This book was released on 1992-01-21 with total page 424 pages. Available in PDF, EPUB and Kindle. Book excerpt: Management of Research and Development Organizations Managing the Unmanageable R. K. Jain and H. C. Triandis Written by the manager of a large research and development organization and a leading behavioral scientist, this book explores some of the essential topics in R&D management while providing hands-on guidance for putting specific techniques to work. 1990 (0 471-50791-1) 268 pp. Managing Technology in the Decentralized Firm Albert H. Rubenstein Technology has traditionally advanced faster than our ability to manage it. Here is a book designed to assist the professional in furthering the corporate technology program through its effective management. Based on studies of over 200 decentralized firms spanning a period of thirty years, Managing Technology in the Decentralized Firm addresses crucial aspects of the research and development and innovation processes, and suggests how to make them pay off. 1989 (0 471-61024-0) 476 pp. Statistical Quality Control for Manufacturing Managers William S. Messina In today’s competitive environment, the responsibility of the manufacturing manager has expanded to include ownership of the quality of the products coming off the line. The author uses real-life business situations to demonstrate how a manager can incorporate statistical quality control (SQC) into virtually any manufacturing line. He also offers practical advice on techniques managers can use to improve quality, increase productivity, and enhance the competitive position of the line. 1987 (0 471-85774-2) 331 pp. Management of Technological Change Yassin Sankar Technology produces changes within the organization that must be considered for effective implementation of innovations. This book focuses on the dynamics of technological change, especially the human aspects. The author examines the impact of technological change on job design, work flow, job stress, the elements of corporate culture, the organizational system, the information technology of the organization, the leadership style and strategic premises, the organizational design, and the value systems of managers and the organization. 1991 (0 471-63147-7) 374 pp.

Download or read book Managing Advanced Manufacturing Technology written by J. R. Bessant and published by Blackwell Pub. This book was released on 1991 with total page 377 pages. Available in PDF, EPUB and Kindle. Book excerpt:

Download or read book Advanced Manufacturing Technology Management written by Mike Harrison and published by . This book was released on 1990-06-01 with total page 176 pages. Available in PDF, EPUB and Kindle. Book excerpt:

Download or read book From Idea to Profit written by Jule A. Miller and published by Van Nostrand Reinhold Company. This book was released on 1986 with total page 282 pages. Available in PDF, EPUB and Kindle. Book excerpt:

Download or read book Design for Advanced Manufacturing Technologies and Processes written by LaRoux K. Gillespie and published by McGraw Hill Professional. This book was released on 2017-05-12 with total page 600 pages. Available in PDF, EPUB and Kindle. Book excerpt: Cutting-edge coverage of the new processes, materials, and technologies that are revolutionizing the manufacturing industry Expertly edited by a past president of the Society of Manufacturing Engineers, this state-of-the-art resource picks up where the bestselling Design for Manufacturability Handbook left off. Within its pages, readers will find detailed, clearly written coverage of the materials, technologies, and processes that have been developed and adopted in the manufacturing industry over the past sixteen years. More than this, the book also includes hard-to-find technical guidance and application information that can be used on the job to actually apply these cutting-edge processes and technologies in a real-world setting. Essential for manufacturing engineers and designers, Design for Advanced Manufacturing is enhanced by a host of international contributors, making the book a true global resource. • Information on the latest technologies and processes such as 3-D printing, nanotechnology, laser cutting, prototyping, additive manufacturing, and CAD/CAM software tools • Coverage of new materials including nano, smart, and shape-memory alloys, in steels, glass, plastics, and composites

Download or read book The Management of Additive Manufacturing written by Mojtaba Khorram Niaki and published by Springer. This book was released on 2017-12-26 with total page 243 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book introduces readers to additive technology and its application in different business sectors. It explores the fundamental impact additive has on technology, particularly on operations, innovation, supply chains, the environment and customer relations. Subsequently, on the basis of a broad survey of the best technology adopters, it offers advice on how to enhance business value by implementing the technology in different industrial and commercial environments. Additive manufacturing (AM) is a new area of manufacturing that has already brought about phenomenal changes to industry and business models. It affects nearly all aspects of the managerial and organizational thinking that was applied to conventional manufacturing. Currently, the technology is being adopted in manufacturing areas that involve high-value products with complex geometries, and small to medium production volumes. It boosts the productivity of new product development processes by slashing costs, reducing time and promoting creativity and innovativeness. Further, it shrinks supply chains by bringing firms closer to their customers. This unique book offers abundant empirical and practical evidence confirming the value of this new technology.

Download or read book Advances in Manufacturing Production Management and Process Control written by Waldemar Karwowski and published by Springer. This book was released on 2019-06-05 with total page 509 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book discusses the latest advances in manufacturing and process control, with a special emphasis on digital manufacturing and intelligent technologies for manufacturing and industrial processes control. The human aspect of the developed technologies and products, their interaction with the users, as well as sustainability issues, are covered in detail. Development of new products using rapid prototyping systems, remote fabrication, and other advanced techniques, is described in detail, highlighting the state-of-the-art and current challenges. Based on both the AHFE 2019 International Conference on Human Aspects of Advanced Manufacturing, and the AHFE 2019 International Conference on Advanced Production Management and Process Control, held on July 24-28, 2019, in Washington D.C., USA, this book also highlight important strategies for managing enterprise of the future.

Download or read book Advanced Manufacturing Systems written by Joseph Sarkis and published by CRC Press. This book was released on 1999-08-19 with total page 416 pages. Available in PDF, EPUB and Kindle. Book excerpt: Serving as a reference and guide to both practitioners and researchers involved in the planning, control, and management of advanced manufacturing systems, Advanced Manufacturing Systems: Strategic Management and Implementation offers information on a wide range of available methodologies and tools. The contents are organized into four parts: Global Strategic Issues; Evaluation, Selection, and Adoption of the Systems; Implementation Issues; and Control and Support. Theoretical and practical, analytical and empirical, this is a valuable resource for those interested in researching or implementing these systems into their organizations.

Download or read book Advanced Manufacturing Technology in China A Roadmap to 2050 written by Tianran Wang and published by Springer Science & Business Media. This book was released on 2012-03-02 with total page 160 pages. Available in PDF, EPUB and Kindle. Book excerpt: As one of the eighteen field-specific reports comprising the comprehensive scope of the strategic general report of the Chinese Academy of Sciences, this sub-report addresses long-range planning for developing science and technology in the field of advanced manufacturing technology. They each craft a roadmap for their sphere of development to 2050. In their entirety, the general and sub-group reports analyze the evolution and laws governing the development of science and technology, describe the decisive impact of science and technology on the modernization process, predict that the world is on the eve of an impending S&T revolution, and call for China to be fully prepared for this new round of S&T advancement. Based on the detailed study of the demands on S&T innovation in China’s modernization, the reports draw a framework for eight basic and strategic systems of socio-economic development with the support of science and technology, work out China’s S&T roadmaps for the relevant eight basic and strategic systems in line with China’s reality, further detail S&T initiatives of strategic importance to China’s modernization, and provide S&T decision-makers with comprehensive consultations for the development of S&T innovation consistent with China’s reality. Supported by illustrations and tables of data, the reports provide researchers, government officials and entrepreneurs with guidance concerning research directions, the planning process, and investment. Founded in 1949, the Chinese Academy of Sciences is the nation’s highest academic institution in natural sciences. Its major responsibilities are to conduct research in basic and technological sciences, to undertake nationwide integrated surveys on natural resources and ecological environment, to provide the country with scientific data and consultations for government’s decision-making, to undertake government-assigned projects with regard to key S&T problems in the process of socio-economic development, to initiate personnel training, and to promote China’s high-tech enterprises through its active engagement in these areas.

Download or read book Investment Decisions in Advanced Manufacturing Technology written by Magdy G. Abdel-Kader and published by Routledge. This book was released on 2018-12-20 with total page 350 pages. Available in PDF, EPUB and Kindle. Book excerpt: First published in 1998, this volume was designed to lead to an operational model of Advanced Manufacturing Technology (AMT) decision making which incorporated the mathematics of fuzzy set theory. The rapid advancement of robotics, automated technologies and software such as CAD and CAM have made such studies paramount. Here, analyses of a questionnaire survey and field study of major UK manufacturing companies together provide a simulating portrayal of AMT investment decision making and have been expanded upon with a model using fuzzy set theory.

Download or read book Advances in Manufacturing Production Management and Process Control written by Beata Mrugalska and published by Springer Nature. This book was released on 2020-06-30 with total page 391 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book discusses the latest advances in the broadly defined field of advanced manufacturing and process control. It reports on cutting-edge strategies for sustainable production and product life cycle management, and on a variety of people-centered issues in the design, operation and management of manufacturing systems and processes. Further, it presents digital modeling systems and additive manufacturing technologies, including advanced applications for different purposes, and discusses in detail the implementation of and challenges imposed by 3D printing technologies. Based on three AHFE 2020 Conferences (the AHFE 2020 Virtual Conference on Human Aspects of Advanced Manufacturing, the AHFE 2020 Virtual Conference on Advanced Production Management and Process Control and the AHFE 2020 Virtual Conference on Additive Manufacturing, Modeling Systems and 3D Prototyping, the book merges ergonomics research, design applications, and up-to-date analyses of various engineering processes. It brings together experimental studies, theoretical methods and best practices, highlights future trends and suggests directions for further technological developments and the improved integration of technologies and humans in the manufacturing industry.

Download or read book Human Aspects of Advanced Manufacturing Production Management and Process Control written by Beata Mrugalska and published by AHFE Conference. This book was released on 2024-07-24 with total page 249 pages. Available in PDF, EPUB and Kindle. Book excerpt: Proceedings of the 15th International Conference on Applied Human Factors and Ergonomics and the Affiliated Conferences, Nice, France, 24-27 July 2024.

Download or read book Economic and Financial Justification of Advanced Manufacturing Technologies written by Hamid R. Parsaei and published by Elsevier. This book was released on 2013-10-22 with total page 320 pages. Available in PDF, EPUB and Kindle. Book excerpt: Competence in investment analysis is now a basic requirement for most practicing managers, engineers, and financial analysts in order to avoid possible serious mistakes arising from flawed or inadequate knowledge of the discipline. Furthermore, individuals who make decisions based on technical economics stake their professional futures, in many cases, on the accuracy of such evaluations. The aim of this volume is to provide a balanced view of the essential components of economic and financial analysis including: 1. Strategic and design issues; 2. Principles of cost management systems and activity-based costing, and; 3. Tools for developing the financial measures of investment worth, with advanced topics and case studies in these three areas.This volume provides a refreshing insight into the various methods that engineers, managers, and financial analysts may need to consider to find good alternatives for the investment of scarce resources. Not only are new ventures presented, but also improvements within existing facilities that include process modification, product design, equipment replacement, and plant expansion/contraction.

Download or read book Selection and Evaluation of Advanced Manufacturing Technologies written by Matthew J. Liberatore and published by Springer Science & Business Media. This book was released on 2012-12-06 with total page 332 pages. Available in PDF, EPUB and Kindle. Book excerpt: Matthew J. Liberatore Department of Management Villanova University Villanova, PA 19085 1. BACKGROUND The weakening competitive position of many segments of u.s. manufacturing has been analyzed, debated and discussed in corporate boardrooms, academic journals and the popular literature. One result has been a renewed commitment toward improving productivity and quality in the workplace. The drive to reduce manufacturing related costs, while meeting ever-changing customer needs, has led many firms to consider more automated and flexible manufacturing systems. The extent to which these new technologies can support business goals in productivity, quality and flexibility is an especially important issue for manufacturing firms in the u.s. and other Western nations. Problems have arisen in developing performance measures and evaluation criteria which reflect the full range of costs and benefits associated with these technologies. Some would argue that managerial policies and attitudes, and not the shortcomings of the equipment or manufacturing processes, are the major impediments to implementation (Kaplan 1984).

Download or read book Management of Advanced Manufacturing Technology written by M. Zairi and published by . This book was released on 1992 with total page 239 pages. Available in PDF, EPUB and Kindle. Book excerpt: