Download or read book Managing CAD CAM written by John Stark and published by McGraw-Hill Companies. This book was released on 1988 with total page 222 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book How to Integrate CAD CAM Systems written by William D. Engelke and published by CRC Press. This book was released on 1987-01-23 with total page 406 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Management of CAD CAM Computer Aided Design Computer Aided Manufacturing Information Key to Improved Manufacturing Productivity written by R. E. Fulton and published by . This book was released on 1984 with total page 24 pages. Available in PDF, EPUB and Kindle. Book excerpt: A key element to improved industry productivity is effective management of CAD/CAM information. To simulate advancements in this area, a joint NASA/Navy/Industry project designated Integrated Programs for Aerospace-Vehicle Design (IPAD) is underway with the goal of raising aerospace industry productivity through advancement of technology to integrate and manage information involved in the design and manufacturing process. The project complements traditional NASA/DOD research to develop aerospace design technology and the Air Force's Integrated Computer-Aided Manufacturing (ICAM) program to advance CAM technology. IPAD research is guided by an Industry Technical Advisory Board (ITAB) composed of over 100 representatives from aerospace and computer companies. This paper summarizes IPAD accomplishments to date in development of requirements and prototype software for various levels of company-wide CAD/CAM data management and discusses plans for development of technology for management of distributed CAD/CAM data and information required to control future knowledge-based CAD/CAM systems.
Download or read book What Every Engineer Should Know about Practical Cad cam Applications written by Stark and published by CRC Press. This book was released on 1986-06-11 with total page 280 pages. Available in PDF, EPUB and Kindle. Book excerpt: This authoritative book -- discussing CAD/CAM in detail from the user's rather than the vendor's point of view -- provides the valuable information engineers and managers need for optimal CAD/CAM implementation and use. It introduces CAD/CAM hardware and software, and demonstrates how to select a CAD/CAM solution for your company's specific requirements ... explains how to implement a CAD/CAM system, with special attention to training and education, and with useful checklists ... describes ongoing systems ... presents an informative overview of CAD/CAM's industrial use ... and details case studies of CAD/CAM applications, representing a broad range of companies throughout the world, in various industrial sectors, at different stages of CAD/CAM use. Complete with a glossary that clearly defines all CAD/CAM terminology, this essential reference source is mandatory reading for mechanical, manufacturing, automotive and aerospace engineers and managers; CAD/CAM system vendors; computer manufacturers; graduate-level courses in mechanical and manufacturing engineering, CAD/CAM, and computer science; and professional seminars in mechanical, manufacturing, and automotive engineering. Book jacket.
Download or read book Advanced CAD CAM Systems written by René Soenen and published by Springer. This book was released on 2016-01-09 with total page 273 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book provides up-to-date information about the promising use of feature technology for integrating computer-aided-design with subsequent applications. The book consists of 20 articles based upon the international IFIP conference on this topic held in Valenciennes, France in May 1994.
Download or read book CADCAM written by Chris McMahon and published by Prentice Hall. This book was released on 1998 with total page 696 pages. Available in PDF, EPUB and Kindle. Book excerpt: McMahon and Browne explore the processes of defining a product design using CADCAM, developing manufacturing plans and instructions for the product and the management of the manufacturing system itself.
Download or read book CAD CAM in Practice written by A.J. Medland and published by Springer Science & Business Media. This book was released on 2012-12-06 with total page 219 pages. Available in PDF, EPUB and Kindle. Book excerpt: Little more than a decade ago computer-aided design and manufacture (CAD/CAM) was a very esoteric field indeed, not one that was of much practical concern to a manager or industrialist unless his business was on the scale of, say, a major automobile manufacturer or in a field of high technology such as aerospace. Like so much else, this situation was revo lutionized by the invention of the silicon chip, the arrival of the micro processor and the dramatic fall in the cost of computer hardware. Today, CAD/CAM has spread down the market, and down the price scale, to the point at which it is both a feasible and an affordable technology for a wide range of small-and medium-sized companies in areas as various as architec ture and general engineering, plastic moulding and consumer electronics. But the explosion - there is no other word for it - in the variety and capabilities of CAD/CAM systems, and their spectacular climb to the top of the hi-tech hit parade, has placed the potential purchaser and user of the new technology in a difficult position. On the one hand he is assured, not least by the manufacturers of CAD/CAM equipment, that a failure to invest in it will leave his company stranded in the industrial Stone Age.
Download or read book Engineering Information Management Systems written by John Stark and published by Van Nostrand Reinhold Company. This book was released on 1992 with total page 232 pages. Available in PDF, EPUB and Kindle. Book excerpt: This guide goes beyond CAD/CAM, showing how to support concurrent engineering both cost-effectively and labour-effectively. The author explains the objectives, structure, role, implementation, and management requirements of Engineering Information Management Systems (EIMS), as well as systems currently available. Readers also learn how to choose the best system for their needs and how to determine its user requirements.
Download or read book The CAD CAM Manager s Complete Anthology written by Management Roundtable, Inc and published by . This book was released on 1986 with total page 180 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Management of CAD CAM Systems written by and published by . This book was released on 1982 with total page pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Engineering Documentation for CAD CAM Applications written by Charles S. Knox and published by CRC Press. This book was released on 2020-08-13 with total page 306 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book emphasizes the importance of consistent, well-planned, and computer-oriented engineering documentation systems to engineering, manufacturing, and accounting. It discusses the systems needed to optimize flow of information and increase the efficiency of modern CAD/CAM systems.
Download or read book Advances in CAD CAM written by P.C.C. Wang and published by Springer Science & Business Media. This book was released on 2012-12-06 with total page 219 pages. Available in PDF, EPUB and Kindle. Book excerpt: To understand what we know and be aware of what is to be known has become the central focus in the treatment of CAD/CAM issues. It has been some time since we began treating issues arriving from engineering data handling in a low key fashion because of its housekeeping chores and data maintenance aspects representing nonglamorous issues related to automation. Since the advent of CAD/CAM,large numbers of data bases have been generated through standalone CAD systems. And the rate of this automated means of generating data is rapidly increasing; this is possibly the key factor in changing our way of looking at engineering data related problems. As one deeply involved with engineering data handling and CAD/CAM applications, I know that to succeed, we must do our homework: tracking the trends, keeping abreast of new technologies, new applications, new companies and products that are exploding on the scene every day. In today's fast-paced information handling era, just keeping up is a full-time job. That is why ATI has initiated these publications, in order to bring to the users some of the information regarding their experiences in the important fields of CAD/CAM and engineering data handling. This volume contains some of the paper, including revisions, which were presented at the Fifth Automation Technology Conference held in Monterey, California. A series of publications has been initiated through cooperation between ATI and the Kluwer Academic Publishers. The first volume was Advances in Engineering Data Handling-Case Studies.
Download or read book Management of CAD CAM Information Key to Improved Manufacturing Productivity written by and published by . This book was released on 1984 with total page 30 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book A Database Management Approach to CAD CAM Systems Integration written by Yehuda E. Kalay and published by . This book was released on 1984 with total page 26 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book CAD CAM written by Peter F. Jones and published by . This book was released on 1992 with total page 360 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book CADCAM written by Chris McMahon and published by Addison-Wesley Longman. This book was released on 1993-01 with total page 508 pages. Available in PDF, EPUB and Kindle. Book excerpt: Providing an integrated presentation of the application of computers to product design and manufacture, this book concentrates on the theme that CAD/CAM involves the use of computers to create, manipulate and apply models of engineering products and systems. It guides the reader through the process of defining a product design with the aid of a computer, then developing manufacturing plans and instructions for the product from the design, and finally planning and controlling the operation of the manufacturing system itself. The book is intended for courses in mechanical and manufacturing systems, and industrial engineering that use CAD and CAM.
Download or read book CAD CAM written by M. Groover and published by Pearson Education. This book was released on 1983-12-01 with total page 942 pages. Available in PDF, EPUB and Kindle. Book excerpt: In this book, the authors examine interactive computer graphics and its use in design industrial robots, computer control of manufacturing processes, computer-integrated production control, automated inspections, and flexible manufacturing systems. They also discuss the implementation of turnkey CAD/CAM systems.
