Download or read book Manufacturing Excellence in Spinning Mills written by A. Kanthimathinathan and published by CRC Press. This book was released on 2022-04-19 with total page 239 pages. Available in PDF, EPUB and Kindle. Book excerpt: Manufacturing towards Excellence in spinning mills aims to help the relevant organization to cut costs, improve throughput, effective utilization of resources and to safeguard the interests of stakeholders. Major aspects discussed includes quality assurance, production management, maintenance management of modern machinery and laboratory equipment towards achieving manufacturing excellence with benchmarking and industry norms. Relevant case studies are provided with dedicated chapters on training and development of employees, energy management and customer focus. Explains industry norms to benchmark any spinning mill against the manufacturing performance parameters. Includes Failure Mode and Effect Analysis and Total Productive Maintenance aspects. Explores training and development standards in spinning mills. Discusses energy management and customer focus through effective techniques. Reviews SPDM, PDM Tools, Contamination index, Spin plan, Customer Satisfaction Index, Co-Creation, and HPT This book is aimed at professionals and researchers in textile engineering and management.

Download or read book Handbook of Maintenance Management and Engineering written by Mohamed Ben-Daya and published by Springer Science & Business Media. This book was released on 2009-07-30 with total page 745 pages. Available in PDF, EPUB and Kindle. Book excerpt: To be able to compete successfully both at national and international levels, production systems and equipment must perform at levels not even thinkable a decade ago. Requirements for increased product quality, reduced throughput time and enhanced operating effectiveness within a rapidly changing customer demand environment continue to demand a high maintenance performance. In some cases, maintenance is required to increase operational effectiveness and revenues and customer satisfaction while reducing capital, operating and support costs. This may be the largest challenge facing production enterprises these days. For this, maintenance strategy is required to be aligned with the production logistics and also to keep updated with the current best practices. Maintenance has become a multidisciplinary activity and one may come across situations in which maintenance is the responsibility of people whose training is not engineering. This handbook aims to assist at different levels of understanding whether the manager is an engineer, a production manager, an experienced maintenance practitioner or a beginner. Topics selected to be included in this handbook cover a wide range of issues in the area of maintenance management and engineering to cater for all those interested in maintenance whether practitioners or researchers. This handbook is divided into 6 parts and contains 26 chapters covering a wide range of topics related to maintenance management and engineering.

Download or read book Process Control in Textile Manufacturing written by Abhijit Majumdar and published by Elsevier. This book was released on 2012-11-27 with total page 513 pages. Available in PDF, EPUB and Kindle. Book excerpt: Complex raw materials and manufacturing processes mean the textile industry is particularly dependent on good process control to produce high and consistent product quality. Monitoring and controlling process variables during the textile manufacturing process also minimises waste, costs and environmental impact. Process control in textile manufacturing provides an important overview of the fundamentals and applications of process control methods.Part one introduces key issues associated with process control and principles of control systems in textile manufacturing. Testing and statistical quality control are also discussed before part two goes on to consider control in fibre production and yarn manufacture. Chapters review process and quality control in natural and synthetic textile fibre cultivation, blowroom, carding, drawing and combing. Process control in ring and rotor spinning and maintenance of yarn spinning machines are also discussed. Finally part three explores process control in the manufacture of knitted, woven, nonwoven textiles and colouration and finishing, with a final discussion of process control in apparel manufacturing.With its distinguished editors and international team of expert contributors, Process control in textile manufacturing is an essential guide for textile engineers and manufacturers involved in the processing of textiles, as well as academic researchers in this field. - Provides an important overview of the fundamentals and applications of process control methods - Discusses key issues associated with process control and principles of control systems in textile manufacturing, before addressing testing and statistical quality control - Explores process control in the manufacture of knitted, woven, nonwoven textiles and colouration and finishing, with a discussion on process control in apparel manufacturing

Download or read book Process Control and Yarn Quality in Spinning written by G. Thilagavathi and published by CRC Press. This book was released on 2016-01-05 with total page 414 pages. Available in PDF, EPUB and Kindle. Book excerpt: The book outlines the concepts of raw material selection, control of various process parameters in the preparatory processes like blow room, carding, combing preparatory and comber to optimize the process conditions, and analysis and interpretation of various types of test reports to find out the source of fault.

Download or read book Modern Approach to Maintenance in Spinning written by Neeraj Niijjaawan and published by WPI Publishing. This book was released on 2010-10-14 with total page 450 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book is a simple and accessible guide to the knowledge required to fulfill the role of a maintenance manager in a textile mill. Covering the complete maintenance program, the book gives a basic all-round understanding of even the small spare parts used in the machineries of spinning mill; hence it will be very useful for the shop-floor technicians also.

Download or read book Manufacturing Excellence in Spinning Mills written by A. Kanthimathinathan and published by CRC Press. This book was released on 2022-04-19 with total page 174 pages. Available in PDF, EPUB and Kindle. Book excerpt: Manufacturing towards Excellence in spinning mills aims to help the relevant organization to cut costs, improve throughput, effective utilization of resources and to safeguard the interests of stakeholders. Major aspects discussed includes quality assurance, production management, maintenance management of modern machinery and laboratory equipment towards achieving manufacturing excellence with benchmarking and industry norms. Relevant case studies are provided with dedicated chapters on training and development of employees, energy management and customer focus. Explains industry norms to benchmark any spinning mill against the manufacturing performance parameters. Includes Failure Mode and Effect Analysis and Total Productive Maintenance aspects. Explores training and development standards in spinning mills. Discusses energy management and customer focus through effective techniques. Reviews SPDM, PDM Tools, Contamination index, Spin plan, Customer Satisfaction Index, Co-Creation, and HPT This book is aimed at professionals and researchers in textile engineering and management.

Download or read book Developments in Yarn Spinning Technologies written by Arindam Basu and published by Elsevier. This book was released on 2024-10-01 with total page 73 pages. Available in PDF, EPUB and Kindle. Book excerpt: Developments in Yarn Spinning Technologies explores the recent advancements in yarn spinning technologies, focusing on improving production and embracing sustainability. While ring spinning remains popular, newer developments in rotor spinning and natural fibre spinning systems are covered.This book also addresses challenges, including the circularity theory, providing concise insights into the evolving landscape of yarn spinning technologies. Ideal for professionals and researchers alike, this book offers valuable perspectives on the industry's dynamic changes. - Focuses on recent developments in spinning, uncovering the evolving techniques and technologies that are reshaping the yarn production industry - Addresses key technological challenges, providing practical insights into overcoming obstacles and staying ahead in the rapidly evolving field - Delves into the distinct properties of yarns, examining how technological innovations impact and enhance their characteristics for improved performance - Explores sustainable practices with a focus on recycled fibre processing

Download or read book Research Design for Combed Yarn Quality written by Dr. Sukhvir Singh and published by LWRN Studio. This book was released on 2023-05-22 with total page 146 pages. Available in PDF, EPUB and Kindle. Book excerpt: The aim of this study is to investigate the effects of finisher drawframe storage variables such as can-spring stiffness, sliver deposition rate and sliver coils position on the quality characteristics of the combed ring-spun yarn. The research design also includes the effect of sliver storage time on the quality of stored sliver and subsequently on roving and yarn produced on speedframe and ringframe respectively. The critical role of storage can-spring parameters on combed sliver, roving and yarn quality has been frequently discussed in spinning preparatory literature. However, a clear understanding of the nature of relationships, as mentioned above, is not yet well established by the previous works. So, there is a need to study the underlying factors at a deeper level that may provide further insight into ways to control ring yarn quality. Therefore, the present investigations were carried out to observe the effects of uncommon process parameters namely can-spring stiffness, delivery rate and sliver coils position at post comber drawing stage on sliver, roving and yarn quality when slivers were allowed to feed without any storage time and after 8 hours storage time. The research plan was developed by implementing a three factor three level Box-Behnken design of experiment. The effects of aforementioned variables were studied on combed yarn unevenness properties (U%, CVm % and Imperfections), tensile properties (yarn tenacity and breaking elongation) and S3 hairiness. The results showed that the effects of can-spring stiffness and sliver coils position are significant on yarn evenness, CVm%, imperfections, tenacity and S3 hairiness. However, the combed yarn quality parameters did not show any significant relationships with the post combing drawing delivery rate. It was observed that the combed yarn produced from bottom position sliver coils using older can-spring showed less even yarn with improved imperfection, having less strength and more hairiness. The combed yarn quality further deteriorates on allowing 8 hours of sliver storage time. It was found that the bottom sliver coils experience the highest compressive forces compared to other sliver coils position and adjacent sliver coils stickiness was observed which result in sliver stretching and failure at the time of processing on speedframe. Also, older can- spring of reduced spring stiffness result in buckling which leads to stored sliver contact with rough sidewalls caused weak & hairy sliver. The combed yarn samples produced from such storage cans leads to uneven yarn with more imperfections, weaker and hairy yarn structure. The contribution of sliver coils position was found highest followed by can-spring stiffness in deciding combed yarn quality parameters in the current study. However, the effect of finisher drawframe delivery speed on yarn quality parameters was found minimal. Apart from this, an attempt has been made to understand the effect of dynamics of the can-spring mechanism on combed sliver handling at the time of sliver deposition at drawframe through bond graph modeling approach. The behaviour of the can-spring used for combed sliver storage was found linear as expected. It was observed that bond graph modeling of can-spring mechanism provides us information on more states in a systematic and algorithmic manner compared to any other technique. Linear momentum, linear displacement of top plate, force experienced by the combed sliver and load versus displacement response of the mechanism was also studied. However, the more rigorous study is required to study the accurate dynamics of such precise systems because the force and the stresses experienced by the combed sliver are too low due to very low inter-fiber cohesion.

Download or read book Operation Management written by B. Mahadevan and published by Pearson Education India. This book was released on 2009 with total page 612 pages. Available in PDF, EPUB and Kindle. Book excerpt:

Download or read book Radio Frequency Identification RFID Technology and Application in Fashion and Textile Supply Chain written by Rajkishore Nayak and published by CRC Press. This book was released on 2019-02-08 with total page 188 pages. Available in PDF, EPUB and Kindle. Book excerpt: Radio Frequency Identification (RFID) Technology and Application in Fashion and Textile Supply Chain highlights the technology of Radio Frequency Identification (RFID) and its applications in fashion and textile manufacturing and supply chain management. It discusses the brief history, technology, and working of RFID including the types of RFID systems. It compares differences, advantages, and disadvantages of RFID and barcode technologies. It also covers application of RFID technology in textile and fashion manufacturing, supply chain, and retail, and RFID-based process control in textile and fashion manufacturing. It covers various applications of RFID starting from fibre manufacturing through yarn and fabric manufacturing; fabric chemical processing; garment manufacturing and quality control; and retail management. It offers case studies of RFID adoption by famous fashion brands detailing the competitive advantages and discusses various challenges faced and future directions of RFID technology.

Download or read book SITRA Norms for Spinning Mills written by and published by . This book was released on 2004 with total page 198 pages. Available in PDF, EPUB and Kindle. Book excerpt: With reference to India.

Download or read book Techno Societal 2020 written by Prashant M. Pawar and published by Springer Nature. This book was released on 2021-06-19 with total page 1090 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book, divided in two volumes, originates from Techno-Societal 2020: the 3rd International Conference on Advanced Technologies for Societal Applications, Maharashtra, India, that brings together faculty members of various engineering colleges to solve Indian regional relevant problems under the guidance of eminent researchers from various reputed organizations. The focus of this volume is on technologies that help develop and improve society, in particular on issues such as advanced and sustainable technologies for manufacturing processes, environment, livelihood, rural employment, agriculture, energy, transport, sanitation, water, education. This conference aims to help innovators to share their best practices or products developed to solve specific local problems which in turn may help the other researchers to take inspiration to solve problems in their region. On the other hand, technologies proposed by expert researchers may find applications in different regions. This offers a multidisciplinary platform for researchers from a broad range of disciplines of Science, Engineering and Technology for reporting innovations at different levels.

Download or read book An Introduction to Predictive Maintenance written by R. Keith Mobley and published by Elsevier. This book was released on 2002-10-24 with total page 451 pages. Available in PDF, EPUB and Kindle. Book excerpt: This second edition of An Introduction to Predictive Maintenance helps plant, process, maintenance and reliability managers and engineers to develop and implement a comprehensive maintenance management program, providing proven strategies for regularly monitoring critical process equipment and systems, predicting machine failures, and scheduling maintenance accordingly. Since the publication of the first edition in 1990, there have been many changes in both technology and methodology, including financial implications, the role of a maintenance organization, predictive maintenance techniques, various analyses, and maintenance of the program itself. This revision includes a complete update of the applicable chapters from the first edition as well as six additional chapters outlining the most recent information available. Having already been implemented and maintained successfully in hundreds of manufacturing and process plants worldwide, the practices detailed in this second edition of An Introduction to Predictive Maintenance will save plants and corporations, as well as U.S. industry as a whole, billions of dollars by minimizing unexpected equipment failures and its resultant high maintenance cost while increasing productivity. - A comprehensive introduction to a system of monitoring critical industrial equipment - Optimize the availability of process machinery and greatly reduce the cost of maintenance - Provides the means to improve product quality, productivity and profitability of manufacturing and production plants

Download or read book The Indian Textile Journal written by and published by . This book was released on 1927 with total page 316 pages. Available in PDF, EPUB and Kindle. Book excerpt:

Download or read book Rural Industrial Management written by N. Meenakshisundaram and published by Concept Publishing Company. This book was released on 2006 with total page 256 pages. Available in PDF, EPUB and Kindle. Book excerpt: With special reference to India.

Download or read book Technical Abstract Bulletin written by and published by . This book was released on with total page 776 pages. Available in PDF, EPUB and Kindle. Book excerpt:

Download or read book Entangled Histories in Palestine Israel written by Dafna Hirsch and published by Taylor & Francis. This book was released on 2024-04-16 with total page 385 pages. Available in PDF, EPUB and Kindle. Book excerpt: This edited volume offers a new critical approach to the study of Zionist history and Israeli-Palestinian relations, based on the encounter between history and anthropology. Informed by the anthropological method of setting large questions to intimate settings, the book examines processes of Zionist colonization, nation-building and Palestinian dispossession by focusing on encounters between members of different national, religious and ethnic groups “from below”—through paying close attention to life stories and reconstructing everyday practices and micro-histories of places and communities. Thus, it tells a complex story in which the practices of historical actors are not simply reducible to a single underlying logic of colonization, even as they participate in the production and reproduction of colonial structures. This approach effectively undermines the prevailing tendency to study national communities in isolation, projecting onto the past an essentialist and rigid separation. Rather than assuming two clearly bounded and monolithic national groups, caught from the start in perpetual conflict, this volume probes their historical production through their evolving relationships, and their varied and shifting political, social, economic and cultural manifestations. The book will be of interest to students and researchers in an array of fields, including the history of Israeli-Palestinian relations, anthropological perspectives on settler colonialism, and Zionism.