Download or read book Main Chain Modification as a Result of Polyolefin Functionalization by Different Techniques written by Rosestela Perera and published by Nova Novinka. This book was released on 2010 with total page 65 pages. Available in PDF, EPUB and Kindle. Book excerpt: When polyolefins are functionalised to modify its chemical structure and polarity, some other secondary reactions take place as well. The grafting of a different monomer onto the main chain of the polymer involves the use of a free radical initiator, such as a peroxide, or irradiation of the sample (gamma rays or ultrasound), that not only provide the free radicals for the grafting but also for main chain modifications. Different reaction processes such as functionalisation in solution, reactive extrusion or irradiation produce different structures. This book deals with modifications of the main chain as a consequence of polyolefin grafting through different techniques, such as functionalisation in solution and reactive extrusion and through polymer irradiation with gamma rays and ultrasound.
Download or read book Main Chain Modification as a Result of Polyolefin Functionalization by Different Techniques written by Rosestela Perera and published by Nova Novinka. This book was released on 2010-07-01 with total page 75 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Functionalization of Polyolefins written by T. C. Mike Chung and published by Elsevier. This book was released on 2002-02-04 with total page 290 pages. Available in PDF, EPUB and Kindle. Book excerpt: Polyolefins are the most widely used commercial polymers and their functionalization has been a long standing scientific challenge and an industrially important area. In recent decades significant progress has been made in the area, with exciting results reported in many journals. Functionalization of Polyolefins is the first book to summarize the significant experimental results on the functionalization of polyolefins and classify them into several chemical methods (shown in each chapter of this book). The book also provides an update on the functional polyolefin materials available today. The two key subject categories covered are: - Chemical approaches in the functionalization of polyolefins - New available polyolefin materials and their potential applications The book includes: - The historic development and future prospects for polyolefins - Functionalization chemistry, classified into four general approaches - Chemical approaches with experimental results - Functionalization approaches The book provides an invaluable reference for researchers in industry and academia interested in functionalization chemistry and polymers. It has been developed through Professor Chung's own teaching experience, both at Pennsylvania State University and on short courses. It is therefore ideally suited as a core text for advanced polymer chemistry and courses on polyolefins and polymers, as well as being a useful supplementary reference for introductory courses on polyolefin chemistry and materials. T.C. Mike Chung is Professor of Polymer Science in the Materials Science and Engineering Department, Pennsylvania State University, USA. He is one of the most experienced people in the field of polyolefin functionalization, with a wide-ranging knowledge gained through many years of experience both in academia and industry. - Shows the available functionalisation approaches with a discussion of their scope and limitations - Written by one of the most experienced people in this field
Download or read book Functionalized Polyolefin Main chain Polymers for Impact Modification of Polyamides written by S Cartasegna and published by . This book was released on 1989 with total page 21 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Functionalized Polyolefin Main chain Polymers for Impact Toughness Modification of Polyamides written by S. Cartasegna and published by . This book was released on 1989 with total page 10 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Plasma Modification of Polyolefins written by N. S. Baneesh and published by Springer Nature. This book was released on 2021-11-22 with total page 262 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book addresses plasma modification of polyolefin surfaces. It comprises 21 chapters divided into three major sections. The first section covers the different techniques used for plasma modification of polyolefin surfaces and the effects of various gases as a surrounding medium, while the second provides a detailed analysis of the physics and chemistry of plasma modification and discusses various innovative characterization techniques, as well as ageing of the modified surface. It focuses on the analysis of changes in polymers’ surface chemistry using various spectroscopic techniques, and of changes in their surface morphology after plasma treatment using optical microscopy, electron microscopy and atomic force microscopy. In addition, it provides detailed information on the characterization of modified polymer surfaces. The book’s third and last section covers a range of applications of plasma-modified polyolefin surfaces varying from the packaging industry to the biomedical field, and shares valuable insights on the lifecycle analysis of plasma modification and modified surfaces.
Download or read book Surface Modification of Polyolefins Using New Synthetic Techniques written by Jing Zhou and published by . This book was released on 1992 with total page 306 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Post polymerization Modification by Direct C H Functionalization written by Di Liu (Ph. D.) and published by . This book was released on 2016 with total page 258 pages. Available in PDF, EPUB and Kindle. Book excerpt: Post-polymerization modification of polymers is an important tool for accessing macromolecular materials with desired functional groups and tailored properties. Such strategy may become the only route to a target polymer when the availability or reactivity of the corresponding monomer is not suited for direct polymerization. Most post-polymerization modification processes are based on transforming functional groups that are pre-installed in the side chains or chain-ends of a polymer. Despite the excellent efficiency and versatility, they are limited to certain backbone structures and often require additional synthetic effort for the synthesis of the corresponding pre-functionalized monomers. More specifically, they are useful only when the pre-functionalized monomers can be readily prepared and incorporated to a polymer by direct polymerization. In contrast, direct functionalization of C-H bonds along the polymer backbone offers a markedly different strategy for the synthesis of functional polymers. Despite the inert nature, the ubiquity of the C-H bonds and their tunable reactivity make them ideal targets for selective chemical modification. In this dissertation, it is first demonstrated that poly(vinyl ester)s and poly(vinyl ether-co-vinyl ester) can be readily prepared via a ruthenium catalyzed C–H oxyfunctionalization of the corresponding poly(vinyl ether)s under mild conditions. The method can be further applied for the synthesis of high molecular weight poly(propenyl ester)s which cannot be obtained using other methods. In addition the method allows poly(isopropenyl ester) to be synthesized without the use of extremely high pressures. Using a similar strategy poly(ethylene glycol-co-glycolic acid) can be prepared by the ruthenium-catalyzed oxidation of poly(ethylene glycol) (PEG). A new process has been developed so that the transformation will cause little chain degradation. The presence of the hydrolytically labile ester groups in the PEG backbone renders the copolymer biodegradable, which may allow the PEG of higher molecular weight to be used in biomedical applications without the concerns of bioaccumulation of PEG into various organs. Lastly, it is demonstrated that azido-functionalized, isotactic polypropylene can be prepared via the direct C–H azidation of a commercially available polymer using a stable azidoiodinane. The azidated PP can further undergo copper-catalyzed azide-alkyne cycloaddition with alkyne terminated polymer to obtain PP-based graft copolymers. It is expected that the ability to incorporate versatile functional groups, such as azides, into common polyolefin feedstocks should expand their applications and potentially enable the realization of new classes of materials.
Download or read book Self Healing Polymers written by Wolfgang H. Binder and published by John Wiley & Sons. This book was released on 2013-03-29 with total page 638 pages. Available in PDF, EPUB and Kindle. Book excerpt: Self-healing is a well-known phenomenon in nature: a broken bone merges after some time and if skin is damaged, the wound will stop bleeding and heals again. This concept can be mimicked in order to create polymeric materials with the ability to regenerate after they have suffered degradation or wear. Already realized applications are used in aerospace engineering, and current research in this fascinating field shows how different self-healing mechanisms proven successful by nature can be adapted to produce even more versatile materials. The book combines the knowledge of an international panel of experts in the field and provides the reader with chemical and physical concepts for self-healing polymers, including aspects of biomimetic processes of healing in nature. It shows how to design self-healing polymers and explains the dynamics in these systems. Different self-healing concepts such as encapsulated systems and supramolecular systems are detailed. Chapters on analysis and friction detection in self-healing polymers and on applications round off the book.
Download or read book Metal Polymer Systems written by Jörg Florian Friedrich and published by John Wiley & Sons. This book was released on 2017-12-04 with total page 444 pages. Available in PDF, EPUB and Kindle. Book excerpt: The result of decades of research by a pioneer in the field, this is the first book to deal exclusively with achieving high-performance metal-polymer composites by chemical bonding. Covering both the academic and practical aspects, the author focuses on the chemistry of interfaces between metals and polymers with a particular emphasis on the chemical bonding between the different materials. He elucidates the various approaches to obtaining a stable interface, including, but not limited to, thermodynamically driven redox reactions, bond protection to prevent hydrolysis, the introduction of barrier layers, and stabilization by spacer molecules. Throughout, chemical bonding is promoted as a simple and economically viable alternative to adhesion based on reversible weak physical interaction. Consequently, the text equips readers with the practical tools necessary for designing high-strength metal-polymer composites with such desired properties as resilience, flexibility, rigidity or degradation resistance.
Download or read book Modification of Polymer Properties written by Carlos Federico Jasso-Gastinel and published by William Andrew. This book was released on 2016-09-14 with total page 233 pages. Available in PDF, EPUB and Kindle. Book excerpt: Modification of Polymer Properties provides, for the first time, in one title, the latest information on gradient IPNs and gradient copolymers. The book covers the broad range of polymer modification routes in a fresh, current view representing a timely addition to the technical literature of this important area. Historically, blends, copolymers, or filled polymers have been developed to meet specific properties, or to optimize the cost/properties relationship. Using the gradient structure approach with conventional radical polymerization, it has been shown that it is possible to optimize properties if appropriate gradients in the composition of copolymer chains are obtained. An overview of the gradient structure approach for designing polymers has not appeared in the recent literature and this title covers the different methods used to modify properties, offering the whole range of ways to modify polymers in just one volume and making this an attractive option for a wide audience of practitioners. The approach for each chapter is to explain the fundamental principles of preparation, cover properties modification, describe future research and applications as examples of materials that may be prepared for specific applications, or that are already in use, in present day applications. The book is for readers that have a basic background in polymer science, as well as those interested in the different ways to combine or modify polymer properties. - Provides an integrated view on how to modify polymer properties - Presents the entire panorama of polymer properties modification in one reference, covering the essential information in each topic - Includes the optimization of properties using gradients in polymers composition or structure
Download or read book Synthesis Techniques for Polymer Nanocomposites written by Vikas Mittal and published by John Wiley & Sons. This book was released on 2014-10-16 with total page 317 pages. Available in PDF, EPUB and Kindle. Book excerpt: The book series 'Polymer Nano-, Micro- and Macrocomposites' provides complete and comprehensive information on all important aspects of polymer composite research and development, including, but not limited to synthesis, filler modification, modeling, characterization as well as application and commercialization issues. Each book focuses on a particular topic and gives a balanced in-depth overview of the respective subfield of polymer composite science and its relation to industrial applications. With the books the readers obtain dedicated resources with information relevant to their research, thereby helping to save time and money. Summarizing all the most important synthesis techniques used in the lab as well as in industry, this book is comprehensive in its coverage from chemical, physical and mechanical viewpoints. This book helps readers to choose the correct synthesis route, such as suspension and miniemulsion polymerization, living polymerization, sonication, mechanical methods or the use of radiation, and so achieve the desired composite properties.
Download or read book Metal Catalysts in Olefin Polymerization written by Zhibin Guan and published by Springer Science & Business Media. This book was released on 2009-03-31 with total page 262 pages. Available in PDF, EPUB and Kindle. Book excerpt: Polyolefin is a major industry that is important for our economy and impacts every aspect of our lives. The discovery of new transition metal-based catalysts is one of the driving forces for the further advancement of this field. Whereas the classical heterogeneous Ziegler-Natta catalysts and homogeneous early transition metal metallocene catalysts remain the workhorses of the polyolefin industry, in roughly the last decade, tremendous progress has been made in developing non-metallocene-based olefin polymerization catalysts. Particularly, the discovery of late transition metal-based olefin polymerization catalysts heralds a new era for this field. These late transition metal complexes not only exhibit high activities rivaling their early metal counterparts, but more importantly they offer unique properties for polymer architectural control and copolymerization with polar olefins. In this book, the most recent major breakthroughs in the development of new olefin polymerization catalysts, including early metal metallocene and non-metallocene complexes and late transition metal complexes, are discussed by leading experts. The authors highlight the most important discoveries in catalysts and their applications in designing new polyolefin-based functional materials.
Download or read book Polymer Science and Engineering written by National Research Council and published by National Academies Press. This book was released on 1994-01-01 with total page 193 pages. Available in PDF, EPUB and Kindle. Book excerpt: Polymers are used in everything from nylon stockings to commercial aircraft to artificial heart valves, and they have a key role in addressing international competitiveness and other national issues. Polymer Science and Engineering explores the universe of polymers, describing their properties and wide-ranging potential, and presents the state of the science, with a hard look at downward trends in research support. Leading experts offer findings, recommendations, and research directions. Lively vignettes provide snapshots of polymers in everyday applications. The volume includes an overview of the use of polymers in such fields as medicine and biotechnology, information and communication, housing and construction, energy and transportation, national defense, and environmental protection. The committee looks at the various classes of polymersâ€"plastics, fibers, composites, and other materials, as well as polymers used as membranes and coatingsâ€"and how their composition and specific methods of processing result in unparalleled usefulness. The reader can also learn the science behind the technology, including efforts to model polymer synthesis after nature's methods, and breakthroughs in characterizing polymer properties needed for twenty-first-century applications. This informative volume will be important to chemists, engineers, materials scientists, researchers, industrialists, and policymakers interested in the role of polymers, as well as to science and engineering educators and students.
Download or read book Single Chain Polymer Nanoparticles written by José A. Pomposo and published by John Wiley & Sons. This book was released on 2017-08-18 with total page 504 pages. Available in PDF, EPUB and Kindle. Book excerpt: This first book on this important and emerging topic presents an overview of the very latest results obtained in single-chain polymer nanoparticles obtained by folding synthetic single polymer chains, painting a complete picture from synthesis via characterization to everyday applications. The initial chapters describe the synthetics methods as well as the molecular simulation of these nanoparticles, while subsequent chapters discuss the analytical techniques that are applied to characterize them, including size and structural characterization as well as scattering techniques. The final chapters are then devoted to the practical applications in nanomedicine, sensing, catalysis and several other uses, concluding with a look at the future for such nanoparticles. Essential reading for polymer and materials scientists, materials engineers, biochemists as well as environmental chemists.
Download or read book Modification of Polymers written by Charles E. Carraher and published by Springer Science & Business Media. This book was released on 2012-12-06 with total page 414 pages. Available in PDF, EPUB and Kindle. Book excerpt: The sheer volume of topics which could have been included under our general title prompted us to make some rather arbitrary decisions about content. Modification by irradiation is not included because the activity in this area is being treated elsewhere. We have chosen to emphasize chemical routes to modification and have striven to pre sent as balanced a representation of current activity as time and page count permit. Industrial applications, both real and potential, are included. Where appropriate, we have encouraged the contributors to include review material to help provide the reader with adequate context. The initial chapter is a review from a historical perspective of polymer modification and contains an extensive bibliography. The remainder of the book is divided into four general areas: Reactions and Preparation of Copolymers Reactions and Preparation of Block and Graft Copolymers Modification Through Condensation Reactions Applications The chemical modification of homopolymers such as polyvinylchlo ride, polyethylene, poly(chloroalkylene sulfides), polysulfones, poly chloromethylstyrene, polyisobutylene, polysodium acrylate, polyvinyl alcohol, polyvinyl chloroformate, sulfonated polystyrene; block and graft copolymers such as poly(styrene-block-ethylene-co-butylene block-styrene), poly(I,4-polybutadiene-block ethylene oxide), star chlorine-telechelic polyisobutylene, poly(isobutylene-co-2,3-dimethyl- 1,3-butadiene), poly(styrene-co-N-butylmethacrylate); cellulose, dex tran and inulin, is described.
Download or read book Polyolefin Composites written by Domasius Nwabunma and published by John Wiley & Sons. This book was released on 2008-01-09 with total page 625 pages. Available in PDF, EPUB and Kindle. Book excerpt: This guide to the properties and applications of polyolefin composites consolidates information to help the reader compare, select, and integrate a material solution as needed. It covers polyolefin microcomposites, polyolefin nanocomposites, and advanced polyolefin nano and molecular composites and discusses processing, morphological characterization, crystallization, structure and properties, and performance evaluation at micro and nano structural levels. It details modeling and simulation, engineering performance properties, and applications. This is a practical, hands-on reference for practicing professionals as well as graduate students.
