Download or read book Magnetostatic Modelling of Thin Layers Using the Method of Moments And Its Implementation in OCTAVE MATLAB written by Roman Szewczyk and published by Springer. This book was released on 2018-04-10 with total page 108 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book presents an efficient and robust method of modelling the magnetostatic properties of different technical elements, especially thin layers for magnetic sensors. The solutions presented utilise the principles of the method of moments. However, the principles have been developed both from the point of view of physical analyses as well as from the point of view of numerical optimisation. To enable cost-efficient use of the solutions for commercial applications in industry, the proposed method was implemented as a code optimised for use in the open-source OCTAVE environment. The scripts can be also used with MATLAB software, which is more user friendly, especially for less experienced users.
Download or read book Automation 2017 written by Roman Szewczyk and published by Springer. This book was released on 2017-02-28 with total page 606 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book consists of papers presented at Automation 2017, an international conference held in Warsaw from March 15 to 17, 2017. It discusses research findings associated with the concepts behind INDUSTRY 4.0, with a focus on offering a better understanding of and promoting participation in the Fourth Industrial Revolution. Each chapter presents a detailed analysis of a specific technical problem, in most cases followed by a numerical analysis, simulation and description of the results of implementing the solution in a real-world context. The theoretical results, practical solutions and guidelines presented are valuable for both researchers working in the area of engineering sciences and practitioners looking for solutions to industrial problems.
Download or read book Automation 2019 written by Roman Szewczyk and published by Springer. This book was released on 2019-02-15 with total page 727 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book consists of papers presented at AUTOMATION2019, an international conference held in Warsaw from March 27 to 29, 2019. It discusses the radical technological changes occurring due to the INDUSTRY 4.0. To follow these changes, both scientists and engineers have to face the challenge of interdisciplinary approach directed at the development of cyber-physical systems. This approach encompasses interdisciplinary theoretical knowledge, numerical modelling and simulation as well as application of artificial intelligence techniques. Both software and physical devices are composed into systems that will increase production efficiency and resource savings. The theoretical results, practical solutions and guidelines presented are valuable for both researchers working in the area of engineering sciences and practitioners looking for solutions to industrial problems.
Download or read book Low Frequency Electromagnetic Modeling for Electrical and Biological Systems Using MATLAB written by Sergey N. Makarov and published by John Wiley & Sons. This book was released on 2015-05-12 with total page 616 pages. Available in PDF, EPUB and Kindle. Book excerpt: Provides a detailed and systematic description of the Method of Moments (Boundary Element Method) for electromagnetic modeling at low frequencies and includes hands-on, application-based MATLAB® modules with user-friendly and intuitive GUI and a highly visualized interactive output. Includes a full-body computational human phantom with over 120 triangular surface meshes extracted from the Visible Human Project® Female dataset of the National library of Medicine and fully compatible with MATLAB® and major commercial FEM/BEM electromagnetic software simulators. This book covers the basic concepts of computational low-frequency electromagnetics in an application-based format and hones the knowledge of these concepts with hands-on MATLAB® modules. The book is divided into five parts. Part 1 discusses low-frequency electromagnetics, basic theory of triangular surface mesh generation, and computational human phantoms. Part 2 covers electrostatics of conductors and dielectrics, and direct current flow. Linear magnetostatics is analyzed in Part 3. Part 4 examines theory and applications of eddy currents. Finally, Part 5 evaluates nonlinear electrostatics. Application examples included in this book cover all major subjects of low-frequency electromagnetic theory. In addition, this book includes complete or summarized analytical solutions to a large number of quasi-static electromagnetic problems. Each Chapter concludes with a summary of the corresponding MATLAB® modules. Combines fundamental electromagnetic theory and application-oriented computation algorithms in the form of stand alone MATLAB® modules Makes use of the three-dimensional Method of Moments (MoM) for static and quasistatic electromagnetic problems Contains a detailed full-body computational human phantom from the Visible Human Project® Female, embedded implant models, and a collection of homogeneous human shells Low-Frequency Electromagnetic Modeling for Electrical and Biological Systems Using MATLAB® is a resource for electrical and biomedical engineering students and practicing researchers, engineers, and medical doctors working on low-frequency modeling and bioelectromagnetic applications.
Download or read book Electromagnetics written by Branislav M. Notaros and published by . This book was released on 2011 with total page 833 pages. Available in PDF, EPUB and Kindle. Book excerpt: "Electromagnetics" is a thorough text that enables readers to readily grasp EM fundamentals, develop true problem-solving skills, and really understand and like the material. It is meant as an ""ultimate resource" for undergraduate electromagnetics."
Download or read book Introduction to Finite Element Analysis Using MATLAB and Abaqus written by Amar Khennane and published by CRC Press. This book was released on 2013-06-10 with total page 490 pages. Available in PDF, EPUB and Kindle. Book excerpt: There are some books that target the theory of the finite element, while others focus on the programming side of things. Introduction to Finite Element Analysis Using MATLAB® and Abaqus accomplishes both. This book teaches the first principles of the finite element method. It presents the theory of the finite element method while maintaining a balance between its mathematical formulation, programming implementation, and application using commercial software. The computer implementation is carried out using MATLAB, while the practical applications are carried out in both MATLAB and Abaqus. MATLAB is a high-level language specially designed for dealing with matrices, making it particularly suited for programming the finite element method, while Abaqus is a suite of commercial finite element software. Includes more than 100 tables, photographs, and figures Provides MATLAB codes to generate contour plots for sample results Introduction to Finite Element Analysis Using MATLAB and Abaqus introduces and explains theory in each chapter, and provides corresponding examples. It offers introductory notes and provides matrix structural analysis for trusses, beams, and frames. The book examines the theories of stress and strain and the relationships between them. The author then covers weighted residual methods and finite element approximation and numerical integration. He presents the finite element formulation for plane stress/strain problems, introduces axisymmetric problems, and highlights the theory of plates. The text supplies step-by-step procedures for solving problems with Abaqus interactive and keyword editions. The described procedures are implemented as MATLAB codes and Abaqus files can be found on the CRC Press website.
Download or read book Numerical Simulation of Mechatronic Sensors and Actuators written by Manfred Kaltenbacher and published by Springer. This book was released on 2015-02-07 with total page 600 pages. Available in PDF, EPUB and Kindle. Book excerpt: Like the previous editions also the third edition of this book combines the detailed physical modeling of mechatronic systems and their precise numerical simulation using the Finite Element (FE) method. Thereby, the basic chapter concerning the Finite Element (FE) method is enhanced, provides now also a description of higher order finite elements (both for nodal and edge finite elements) and a detailed discussion of non-conforming mesh techniques. The author enhances and improves many discussions on principles and methods. In particular, more emphasis is put on the description of single fields by adding the flow field. Corresponding to these field, the book is augmented with the new chapter about coupled flow-structural mechanical systems. Thereby, the discussion of computational aeroacoustics is extended towards perturbation approaches, which allows a decomposition of flow and acoustic quantities within the flow region. Last but not least, applications are updated and restructured so that the book meets modern demands.
Download or read book Modern Fortran written by Milan Curcic and published by Simon and Schuster. This book was released on 2020-10-07 with total page 414 pages. Available in PDF, EPUB and Kindle. Book excerpt: Modern Fortran teaches you to develop fast, efficient parallel applications using twenty-first-century Fortran. In this guide, you’ll dive into Fortran by creating fun apps, including a tsunami simulator and a stock price analyzer. Filled with real-world use cases, insightful illustrations, and hands-on exercises, Modern Fortran helps you see this classic language in a whole new light. Summary Using Fortran, early and accurate forecasts for hurricanes and other major storms have saved thousands of lives. Better designs for ships, planes, and automobiles have made travel safer, more efficient, and less expensive than ever before. Using Fortran, low-level machine learning and deep learning libraries provide incredibly easy, fast, and insightful analysis of massive data. Fortran is an amazingly powerful and flexible programming language that forms the foundation of high performance computing for research, science, and industry. And it's come a long, long way since starting life on IBM mainframes in 1956. Modern Fortran is natively parallel, so it's uniquely suited for efficiently handling problems like complex simulations, long-range predictions, and ultra-precise designs. If you're working on tasks where speed, accuracy, and efficiency matter, it's time to discover—or re-discover—Fortran.. About the technology For over 60 years Fortran has been powering mission-critical scientific applications, and it isn't slowing down yet! Rock-solid reliability and new support for parallel programming make Fortran an essential language for next-generation high-performance computing. Simply put, the future is in parallel, and Fortran is already there. Purchase of the print book includes a free eBook in PDF, Kindle, and ePub formats from Manning Publications. About the book Modern Fortran teaches you to develop fast, efficient parallel applications using twenty-first-century Fortran. In this guide, you'll dive into Fortran by creating fun apps, including a tsunami simulator and a stock price analyzer. Filled with real-world use cases, insightful illustrations, and hands-on exercises, Modern Fortran helps you see this classic language in a whole new light. What's inside Fortran's place in the modern world Working with variables, arrays, and functions Module development Parallelism with coarrays, teams, and events Interoperating Fortran with C About the reader For developers and computational scientists. No experience with Fortran required. About the author Milan Curcic is a meteorologist, oceanographer, and author of several general-purpose Fortran libraries and applications. Table of Contents PART 1 - GETTING STARTED WITH MODERN FORTRAN 1 Introducing Fortran 2 Getting started: Minimal working app PART 2 - CORE ELEMENTS OF FORTRAN 3 Writing reusable code with functions and subroutines 4 Organizing your Fortran code using modules 5 Analyzing time series data with arrays 6 Reading, writing, and formatting your data PART 3 - ADVANCED FORTRAN USE 7 Going parallel with Fortan coarrays 8 Working with abstract data using derived types 9 Generic procedures and operators for any data type 10 User-defined operators for derived types PART 4 - THE FINAL STRETCH 11 Interoperability with C: Exposing your app to the web 12 Advanced parallelism with teams, events, and collectives
Download or read book Exploratory Data Analysis with MATLAB written by Wendy L. Martinez and published by CRC Press. This book was released on 2017-08-07 with total page 686 pages. Available in PDF, EPUB and Kindle. Book excerpt: Praise for the Second Edition: "The authors present an intuitive and easy-to-read book. ... accompanied by many examples, proposed exercises, good references, and comprehensive appendices that initiate the reader unfamiliar with MATLAB." —Adolfo Alvarez Pinto, International Statistical Review "Practitioners of EDA who use MATLAB will want a copy of this book. ... The authors have done a great service by bringing together so many EDA routines, but their main accomplishment in this dynamic text is providing the understanding and tools to do EDA. —David A Huckaby, MAA Reviews Exploratory Data Analysis (EDA) is an important part of the data analysis process. The methods presented in this text are ones that should be in the toolkit of every data scientist. As computational sophistication has increased and data sets have grown in size and complexity, EDA has become an even more important process for visualizing and summarizing data before making assumptions to generate hypotheses and models. Exploratory Data Analysis with MATLAB, Third Edition presents EDA methods from a computational perspective and uses numerous examples and applications to show how the methods are used in practice. The authors use MATLAB code, pseudo-code, and algorithm descriptions to illustrate the concepts. The MATLAB code for examples, data sets, and the EDA Toolbox are available for download on the book’s website. New to the Third Edition Random projections and estimating local intrinsic dimensionality Deep learning autoencoders and stochastic neighbor embedding Minimum spanning tree and additional cluster validity indices Kernel density estimation Plots for visualizing data distributions, such as beanplots and violin plots A chapter on visualizing categorical data
Download or read book Recent Developments of Electrical Drives written by Slawomir Wiak and published by Springer Science & Business Media. This book was released on 2007-06-08 with total page 459 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book presents papers covering a wide spectrum of theory and practice, deeply rooted in engineering problems at a high practical and theoretical level. The contents explore theory, control systems and applications, the heart of the matter in electrical drives.
Download or read book Magnetic Resonance Neurography written by Chhabra Avneesh and published by JAYPEE BROTHERS PUBLISHERS. This book was released on 2012-12-15 with total page 213 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book, first of its kind, combination of concise explanations and focused clinical information satisfies the needs of practicing radiologists, neurologists, neurosurgeons, plastic and other peripheral nerve surgeons in need of a handy reference and technologists performing MRN studies. Written by two experts of magnetic resonance neurography (MRN) practitioners and educators, this thoroughly illustrated resource delivers how the information you need to perform and interpret peripheral nerve MR imaging studies with confidence. Concise descriptions and high quality illustrations combined wit.
Download or read book Channel Characterisation and System Design for Sub Surface Communications written by David Gibson and published by Lulu.com. This book was released on 2010-06-13 with total page 302 pages. Available in PDF, EPUB and Kindle. Book excerpt: Based on the author's PhD thesis, this book is a theoretical study of subterranean radio communication, with the focus on methods that depend primarily on the penetration of electromagnetic fields through the ground. Through-the-earth communication using e-m fields - specifically magnetic induction - plays a role in search and rescue systems used in the mining industry. It is also used for borehole telemetry, pipeline location and by cavers and pot-holers. Chapters describe propagation, antennas, and the design of transmitters and receivers. A figure of merit - the specific aperture - is introduced as an aid to antenna design. A crucial aspect of all systems is the signal to noise ratio, for which the strategy of noise-matching is introduced. The design of a wide-band low-frequency sounder is described, for channel evaluation using a non-ideal binary sequence. A method of calculating the inverse of a generalised sequence is described, for which cross-correlation results in a system identification signal.
Download or read book Introductory Solid State Physics with MATLAB Applications written by Javier E. Hasbun and published by CRC Press. This book was released on 2019-10-08 with total page 508 pages. Available in PDF, EPUB and Kindle. Book excerpt: Solid state physics, the study and prediction of the fundamental physical properties of materials, forms the backbone of modern materials science and has many technological applications. The unique feature of this text is the MATLAB®-based computational approach with several numerical techniques and simulation methods included. This is highly effective in addressing the need for visualization and a direct hands-on approach in learning the theoretical concepts of solid state physics. The code is freely available to all textbook users. Additional Features: Uses the pedagogical tools of computational physics that have become important in enhancing physics teaching of advanced subjects such as solid state physics Adds visualization and simulation to the subject in a way that enables students to participate actively in a hand-on approach Covers the basic concepts of solid state physics and provides students with a deeper understanding of the subject matter Provides unique example exercises throughout the text Obtains mathematical analytical solutions Carries out illustrations of important formulae results using programming scripts that students can run on their own and reproduce graphs and/or simulations Helps students visualize solid state processes and apply certain numerical techniques using MATLAB®, making the process of learning solid state physics much more effective Reinforces the examples discussed within the chapters through the use of end-of-chapter exercises Includes simple analytical and numerical examples to more challenging ones, as well as computational problems with the opportunity to run codes, create new ones, or modify existing ones to solve problems or reproduce certain results
Download or read book Scientific Computing in Electrical Engineering written by G. Ciuprina and published by Springer Science & Business Media. This book was released on 2007-05-30 with total page 464 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book is a collection of selected papers presented at the last Scientific Computing in Electrical Engineering (SCEE) Conference, held in Sinaia, Romania, in 2006. The series of SCEE conferences aims at addressing mathematical problems which have a relevance to industry, with an emphasis on modeling and numerical simulation of electronic circuits, electromagnetic fields but also coupled problems and general mathematical and computational methods.
Download or read book Microwave and RF Design written by Michael Bernard Steer and published by SciTech Publishing. This book was released on 2013 with total page 0 pages. Available in PDF, EPUB and Kindle. Book excerpt: "Microwave & RF Design: A Systems Approach, 2nd Edition is a comprehensive treatment of the subject for advanced undergrad and graduate students (as well as professionals), focusing on the systems and emphasizing design. Components are covered in depth, but always with the idea of how they fit into modern radio, radar, and sensor systems. Advanced components and design techniques are presented along with a thoroughly modern treatment of traditional microwave theory and techniques."--pub. desc.
Download or read book Discontinuous Galerkin Methods written by Bernardo Cockburn and published by Springer Science & Business Media. This book was released on 2012-12-06 with total page 468 pages. Available in PDF, EPUB and Kindle. Book excerpt: A class of finite element methods, the Discontinuous Galerkin Methods (DGM), has been under rapid development recently and has found its use very quickly in such diverse applications as aeroacoustics, semi-conductor device simula tion, turbomachinery, turbulent flows, materials processing, MHD and plasma simulations, and image processing. While there has been a lot of interest from mathematicians, physicists and engineers in DGM, only scattered information is available and there has been no prior effort in organizing and publishing the existing volume of knowledge on this subject. In May 24-26, 1999 we organized in Newport (Rhode Island, USA), the first international symposium on DGM with equal emphasis on the theory, numerical implementation, and applications. Eighteen invited speakers, lead ers in the field, and thirty-two contributors presented various aspects and addressed open issues on DGM. In this volume we include forty-nine papers presented in the Symposium as well as a survey paper written by the organiz ers. All papers were peer-reviewed. A summary of these papers is included in the survey paper, which also provides a historical perspective of the evolution of DGM and its relation to other numerical methods. We hope this volume will become a major reference in this topic. It is intended for students and researchers who work in theory and application of numerical solution of convection dominated partial differential equations. The papers were written with the assumption that the reader has some knowledge of classical finite elements and finite volume methods.
Download or read book Electromagnetics Volume 1 BETA written by Steven W. Ellingson and published by VT Publishing. This book was released on 2018-01-03 with total page 208 pages. Available in PDF, EPUB and Kindle. Book excerpt: Electromagnetics (CC BY-SA 4.0) is an open textbook intended to serve as a primary textbook for a one-semester first course in undergraduate engineering electromagnetics, and includes:electric and magnetic fields; electromagnetic properties of materials; electromagnetic waves; and devices that operate according to associated electromagnetic principles including resistors,capacitors, inductors, transformers, generators, and transmission lines. This book employs the "transmission lines first" approach, in which transmission lines are introduced using a lumped-element equivalent circuit model fora differential length of transmission line, leading to one-dimensional wave equations for voltage and current. This book is intended for electrical engineering students in the third year of a bachelor of science degree program. A free electronic version of this book is available at: https://doi.org/10.7294/W4WQ01ZM
