Download or read book Magneto Optical Imaging written by Tom H. Johansen and published by Springer Science & Business Media. This book was released on 2012-12-06 with total page 356 pages. Available in PDF, EPUB and Kindle. Book excerpt: Magneto-Optical Imaging has developed rapidly over the last decade to emerge as a leading technique to directly visualise the static and dynamic magnetic behaviour of materials, capable of following magnetic processes on the scale of centimeters to sub-microns and at timescales from hours to nanoseconds. The images are direct, real-time, and give space-resolved information, such as ultrafast magnetic processes and revealing the motion of individual vortices in superconductors. The book is a fully up-to-date report of the present status of the technique.
Download or read book Advances in Superconductivity VIII written by Hisao Hayakawa and published by Springer Science & Business Media. This book was released on 2013-11-11 with total page 1394 pages. Available in PDF, EPUB and Kindle. Book excerpt: Since the discovery of superconductivity with trans1tton temperatures above 77 K, concentrated research activities toward the exploration of practical applica tions of these materials have been carried out. Currently, a remarkable improve ment in superconducting properties has been achieved due to the fine optimization of fabrication processes, and this has attracted industrial interest for future applications. In the case of NdBa Cu 0 materials, a new pinning mecha 2 3 7 nism was found which enhances the critical current under applied magnetic fields. In single crystals of these materials, oxygen control results in an increase in the growth rate. The metalorganic chemical vapor deposition (MOCVD) film quality has been improved by using a new liquid raw material. Simultaneously, real demands from the viewpoint of the market start to be a motivation force, es pecially in electronics application where some products are already being sold. At the same time, interesting physical properlies have been obtained from a new superconducting single crystal which has a layered perovskite structure without copper. In addition, various precision measurement techniques have confirmed the d-wave mechanism and the existence of intrinsicJosephson junctions in single crystals. These new phenomena challenge the existing theoretical models but also open the way for new applications. These significant areas of progress in materials science have led high-Tc super conductivity research into the next phase of activity, while fundamental research continues to be very important. I sincerely hope that this volume will give further impetus to this development.
Download or read book Critical State In Superconductors Proceedings Of 1994 Topical International Cryogenic Materials Conference written by Teruo Matsushita and published by World Scientific. This book was released on 1995-06-09 with total page 410 pages. Available in PDF, EPUB and Kindle. Book excerpt: These proceedings include 76 papers on vortex structure and dynamics, flux pinning, flux creep and melting, critical state phenomena, weak links as well as technical problems for fabrication of materials with high critical current density, for both high-temperature and low-temperature superconductors.
Download or read book Handbook of Superconductivity written by David A. Cardwell and published by CRC Press. This book was released on 2022-07-05 with total page 881 pages. Available in PDF, EPUB and Kindle. Book excerpt: This is the last of three volumes of the extensively revised and updated second edition of the Handbook of Superconductivity. The past twenty years have seen rapid progress in superconducting materials, which exhibit one of the most remarkable physical states of matter ever to be discovered. Superconductivity brings quantum mechanics to the scale of the everyday world. Viable applications of superconductors rely fundamentally on an understanding of these intriguing phenomena and the availability of a range of materials with bespoke properties to meet practical needs. While the first volume covers fundamentals and various classes of materials, the second addresses processing of these into various shapes and configurations needed for applications, and ends with chapters on refrigeration methods necessary to attain the superconducting state and the desired performance. This third volume starts with a wide range of methods permitting one to characterize both the materials and various end products of processing. Subsequently, diverse classes of both large scale and electronic applications are described. Volume 3 ends with a glossary relevant to all three volumes. Key Features: Covers the depth and breadth of the field Includes contributions from leading academics and industry professionals across the world Provides hands-on familiarity with the characterization methods and offers descriptions of representative examples of practical applications A comprehensive reference, the handbook is suitable for both graduate students and practitioners in experimental physics, materials science, and multiple engineering disciplines, including electronic and electrical, chemical, mechanical, metallurgy and others.
Download or read book Handbook of Superconducting Materials written by David A. Cardwell and published by CRC Press. This book was released on 2003 with total page 1136 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Engineering Properties of Superconducting Materials written by Tim Coombs and published by MDPI. This book was released on 2021-06-09 with total page 136 pages. Available in PDF, EPUB and Kindle. Book excerpt: Plastic (and microplastic) pollution has been described as one of the greatest environmental challenges of our time, and a hallmark of the human-driven epoch known as the Anthropocene. It has gained the attention of the general public, governments, and environmental scientists worldwide. To date, the main focus has been on plastics in the marine environment, but interest in the presence and effects of plastics in freshwaters has increased in the recent years. The occurrence of plastics within inland lakes and rivers, as well as their biota, has been demonstrated. Experiments with freshwater organisms have started to explore the direct and indirect effects resulting from plastic exposure. There is a clear need for further research, and a dedicated space for its dissemination. This book is devoted to highlighting current research from around the world on the prevalence, fate, and effects of plastic in freshwater environments.
Download or read book Critical Currents In Superconductors Proceedings Of The 8th International Workshop written by Teruo Matsushita and published by World Scientific. This book was released on 1996-11-26 with total page 538 pages. Available in PDF, EPUB and Kindle. Book excerpt: This workshop includes about 110 papers describing the flux pinning and related electromagnetic phenomena in superconductors. Various problems are argued on exotic properties of flux lines, flux dynamics, flux pinning mechanisms, critical current density and critical state phenomena in both high- and low-temperature superconductors.
Download or read book Applied Superconductivity written by Paul Seidel and published by John Wiley & Sons. This book was released on 2015-01-22 with total page 1336 pages. Available in PDF, EPUB and Kindle. Book excerpt: This wide-ranging presentation of applied superconductivity, from fundamentals and materials right up to the details of many applications, is an essential reference for physicists and engineers in academic research as well as in industry. Readers looking for a comprehensive overview on basic effects related to superconductivity and superconducting materials will expand their knowledge and understanding of both low and high Tc superconductors with respect to their application. Technology, preparation and characterization are covered for bulk, single crystals, thins fi lms as well as electronic devices, wires and tapes. The main benefit of this work lies in its broad coverage of significant applications in magnets, power engineering, electronics, sensors and quantum metrology. The reader will find information on superconducting magnets for diverse applications like particle physics, fusion research, medicine, and biomagnetism as well as materials processing. SQUIDs and their usage in medicine or geophysics are thoroughly covered, as are superconducting radiation and particle detectors, aspects on superconductor digital electronics, leading readers to quantum computing and new devices.
Download or read book Advances in Superconductivity XII written by T. Yamashita and published by Springer Science & Business Media. This book was released on 2013-11-11 with total page 1162 pages. Available in PDF, EPUB and Kindle. Book excerpt: The 12th International Symposium on Superconductivity was held in Morioka, Japan, October 17-19, 1999. Convened annually since 1988, the symposium covers the whole field of superconductivity from fundamental physics and chemistry to a variety of applications. At the 12th Symposium, a mini-symposium focusing on the two-dimensionality of high-temperature superconductors, or the c-axis transport, and a session on vortex physics were organized. There were also many reports on the recent developments of YBCO-based coated conductors both in the United States and in Japan, AC losses of wires and tapes, developments of bulk materials with strong flux pinning, the recent progress in thin film and junction technologies, and the demonstration of various electronics applications using SQUIDs, microwave devices, and single-flux-quantum (SFQ) digital devices. This volume is a valuable resource for all those working in the field of superconductivity.
Download or read book Chemical Abstracts written by and published by . This book was released on 2002 with total page 2540 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book High Tc Superconductors for Magnet and Energy Technology written by Beate Lehndorff and published by Springer. This book was released on 2003-07-01 with total page 204 pages. Available in PDF, EPUB and Kindle. Book excerpt: Since the discovery of high temperature superconductors the scientific com nmnity has been very active in research on material and system development as well as on the basic understanding of the mechanism of superconductiv ity at high transition temperatures. Industrial groups joined in very soon as with these new materials the prospects for commercial application of super conductivity seemed to be more promising than ever. Materials processing was divided into film deposition and bulk preparation techniques, the latter including conductor fabrication and melt growth of monolithic samples as well. Because of the high impact of possible applications in energy technol ogy, wire and tape fabrication of the BSCCO superconductors is one of the most important fields, in addition to thin film technology for mobile comuni cation. Only since processes like IBAD and RABiTS TM were invented have film deposition techniques also become important for energy technology. In order to produce suitable conductors with material properties which meet the challenge imposed by energy technology, detailed understanding of the phase formation and physical properties of the high temperature super conductors is necessary. The goal of this book is on one hand to provide the basic information on phase formation and physical properties, and to give a short overview of the state of the art in conductor preparation and character ization. On the other hand it contains the author's own results in the field of preparation and characterization.
Download or read book Physics and Materials Science of Vortex States Flux Pinning and Dynamics written by R. Kossowsky and published by Springer Science & Business Media. This book was released on 1999-04-30 with total page 796 pages. Available in PDF, EPUB and Kindle. Book excerpt: Proceedings of the NATO Advanced Study Institute, Kusadasi, Turkey, July 26-August 8, 1998
Download or read book HTS Thin Film and More on Vortex Studies written by A. V. Narlikar and published by Nova Publishers. This book was released on 2005 with total page 240 pages. Available in PDF, EPUB and Kindle. Book excerpt: HTS Thin Film & More On Vortex Studies - Advances in Research & Applications
Download or read book High Tc Superconductors written by J. Dumas and published by Elsevier. This book was released on 1993-05-05 with total page 763 pages. Available in PDF, EPUB and Kindle. Book excerpt: A wide range of progress in materials development [single crystals, ceramics, thin films, wire and tapes] is reported in the 169 papers in this volume. The main focus of the papers is in attaining a better understanding of the relationship between microstructure and electrical properties. Invited papers cover topics such as the effects of substitution and doping; multilayers; nanostructure characterisation; electric field effects in High Tc Superconductors [HTS]; surface stability; critical currents; flux pinning and magnetooptic imaging of flux patterns; effects of irradiation induced defects; properties and preparation of materials; microwave properties and electronic devices. A clearly broadened basis for understanding processes and mechanisms in [HTS] is portrayed. Appreciable progress has been achieved in the reproducible manufacturing of high quality materials supported by very efficient methods in microstructural analysis. This essential improvement is reflected in the increased number of practical devices encouraging the use of HTS in applications for electronics and power engineering, all of which are reviewed in depth in this work.
Download or read book Physical Properties of High Temperature Superconductors written by Rainer Wesche and published by John Wiley & Sons. This book was released on 2015-05-13 with total page 544 pages. Available in PDF, EPUB and Kindle. Book excerpt: A much-needed update on complex high-temperaturesuperconductors, focusing on materials aspects; this timely bookcoincides with a recent major break-through of the discovery ofiron-based superconductors. It provides an overview of materials aspects of high-temperaturesuperconductors, combining introductory aspects, description of newphysics, material aspects, and a description of the materialproperties This title is suitable for researchers inmaterials science, physics and engineering. Also for techniciansinterested in the applications of superconductors, e.g. asbiomagnets
Download or read book Superconductivity written by Paolo Mele and published by Springer Nature. This book was released on 2019-08-21 with total page 379 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book provides readers with a comprehensive overview of the science of superconducting materials. It serves as a fundamental information source on the actual techniques and methodologies involved in superconducting materials growth, characterization and processing. This book includes coverage of several categories of medium and high-temperature superconducting materials: cuprate oxides, borides, and iron-based chalcogenides and pnictides. Provides a single-source reference on superconducting materials growth, characterization and processing; Bridges the gap between materials science and applications of superconductors; Discusses several categories of superconducting materials such as cuprate oxides, borides, and iron-based chalcogenides and pnictides; Covers synthesis, characterization, and processing of superconducting materials, as well as the nanoengineering approach to tailor the properties of the used materials at the nanoscale level.
Download or read book Nanoscale Ferroelectrics and Multiferroics written by Miguel Alguero and published by John Wiley & Sons. This book was released on 2016-03-21 with total page 984 pages. Available in PDF, EPUB and Kindle. Book excerpt: This two volume set reviews the key issues in processing and characterization of nanoscale ferroelectrics and multiferroics, and provides a comprehensive description of their properties, with an emphasis in differentiating size effects of extrinsic ones like boundary or interface effects. Recently described nanoscale novel phenomena are also addressed. Organized into three parts it addresses key issues in processing (nanostructuring), characterization (of the nanostructured materials) and nanoscale effects. Taking full advantage of the synergies between nanoscale ferroelectrics and multiferroics, the text covers materials nanostructured at all levels, from ceramic technologies like ferroelectric nanopowders, bulk nanostructured ceramics and thick films, and magnetoelectric nanocomposites, to thin films, either polycrystalline layer heterostructures or epitaxial systems, and to nanoscale free standing objects with specific geometries, such as nanowires and tubes at different levels of development. This set is developed from the high level European scientific knowledge platform built within the COST (European Cooperation in Science and Technology) Action on Single and multiphase ferroics and multiferroics with restricted geometries (SIMUFER, ref. MP0904). Chapter contributors have been carefully selected, and have all made major contributions to knowledge of the respective topics, and overall, they are among most respected scientists in the field.
