Download or read book Magnesium Technology written by Horst E. Friedrich and published by Springer Science & Business Media. This book was released on 2006 with total page 718 pages. Available in PDF, EPUB and Kindle. Book excerpt: In this book the authors present the current state of both research and technological application of magnesium. In particular, casting and wrought alloys are presented in Chapter 5, followed by a large chapter dedicated to fabrication methods. Corrosion and Protection are treated in Chapter 7. Chapter 8 discusses Engineering Requirements, Strategies and Examples for automobiles in Europe, USA, Asia and Pacific and also for Aerospace and Consumer Articles. Chapter 10 is dedicated to recycling. The experience of authors from seven countries has been combined to produce this book. The book addresses materials researchers as well as design engineers. TOC:Introduction.- History.- Production Technologies.- Physical Metallurgy.- Melting, Alloying and Refining.- Alloys of Practical Importance.- Fabrication Methods.- Corrosion and Surface Protection.- Engineering Requirements, Strategies and Examples.- Recycling.- Data Sheet.
Download or read book Essential Readings in Magnesium Technology written by Suveen Mathaudhu and published by Springer. This book was released on 2016-12-06 with total page 609 pages. Available in PDF, EPUB and Kindle. Book excerpt: This is a compilation of the best papers in the history of Magnesium Technology, a definitive annual reference in the field of magnesium production and related light metals technologies. The volume contains a strong topical mix of application and fundamental research articles on magnesium technology. Section titles: 1.Magnesium Technology History and Overview 2.Electrolytic and Thermal Primary Production 3.Melting, Refining, Recycling, and Life-Cycle Analysis 4.Casting and Solidification 5.Alloy and Microstructural Design 6.Wrought Processing 7.Modeling and Simulation 8.Joining 9.Corrosion, Surface Treatment, and Coating
Download or read book Magnesium Technology 2021 written by Victoria M. Miller and published by Springer Nature. This book was released on 2021-02-19 with total page 190 pages. Available in PDF, EPUB and Kindle. Book excerpt: The Magnesium Technology Symposium, the event on which this collection is based, is one of the largest yearly gatherings of magnesium specialists in the world. Papers represent all aspects of the field, ranging from primary production to applications to recycling. Moreover, papers explore everything from basic research findings to industrialization. Magnesium Technology 2021 is a definitive reference that covers a broad spectrum of current topics, including novel extraction techniques; primary production; alloys and their production; thermodynamics and kinetics; cast products and processing; wrought products and processing; forming, joining, and machining; corrosion and surface finishing; structural applications; degradation and biomedical applications; and several others.
Download or read book Magnesium and Its Alloys written by Leszek A. Dobrzanski and published by CRC Press. This book was released on 2019-08-01 with total page 619 pages. Available in PDF, EPUB and Kindle. Book excerpt: Magnesium and Its Alloys: Technology and Applications covers a wide scope of topics related to magnesium science and engineering, from manufacturing and production to finishing and applications. This handbook contains thirteen chapters, each contributed by experts in their respective fields, and presents a broad spectrum of new information on pure magnesium, magnesium alloys, and magnesium matrix MgMCs composites. It covers such topics as computational thermodynamics, modern Mg-alloys with enhanced creep or fatigue properties, cutting-edge approaches to melt treating (grain refinement, micro-alloying, and the resulting solidification and growth), coatings, surface engineering, environmental protection (recycling and green energy storage and production), as well as biomedical applications. Aimed at researchers, professionals, and graduate students, the book conveys comprehensive and cutting-edge knowledge on magnesium alloys. It is especially useful to those in the fields of materials engineering, mechanical engineering, manufacturing engineering, and metallurgy.
Download or read book Magnesium Alloys and Technologies written by Karl U. Kainer and published by John Wiley & Sons. This book was released on 2006-03-06 with total page 293 pages. Available in PDF, EPUB and Kindle. Book excerpt: The need for light-weight materials, especially in the automobile industry, created renewed interest in innovative applications of magnesium materials. This demand has resulted in increased research and development activity in companies and research institutes in order to achieve an improved property profile and better choice of alloy systems. Here, development trends and application potential in different fields like the automotive industry and communication technology are discussed in an interdisciplinary framework.
Download or read book Magnesium Technology 2020 written by and published by . This book was released on 2020 with total page 381 pages. Available in PDF, EPUB and Kindle. Book excerpt: The Magnesium Technology Symposium, the event on which this collection is based, is one of the largest yearly gatherings of magnesium specialists in the world. Papers represent all aspects of the field, ranging from primary production to applications to recycling. Moreover, papers explore everything from basic research findings to industrialization. Magnesium Technology 2020 covers a broad spectrum of current topics, including alloys and their properties; cast products and processing; wrought products and processing; forming, joining, and machining; corrosion and surface finishing; and structural applications. In addition, there is coverage of new and emerging applications.
Download or read book The Chemistry and Technology of Magnesia written by Mark A. Shand and published by John Wiley & Sons. This book was released on 2006-06-12 with total page 286 pages. Available in PDF, EPUB and Kindle. Book excerpt: A Complete Guide to Magnesia-From Mining to End Use Often relegated to footnote status in texts, magnesia is nevertheless a valuable substance widely used in applications ranging from wastewater treatment to catalysis. The Chemistry and Technology of Magnesia fills the long-standing gap in the literature with a comprehensive, one-stop reference to "all things magnesia." The book brings together the many strands of information on magnesium compounds, their production, testing and evaluation, technology, applications, and markets. Opening with an introductory history of the chemical, it covers the life cycle of magnesia, natural and synthetic production, and uses in different fields including the environmental, health, and agricultural industries. Readers will find the section on health and safety issues particularly relevant. Chapters include: * The History of Magnesia * Synthetic Magnesia * Pulp Applications * Environmental Applications * Magnesia Cements * Furnaces and Kilns * Post Calcination Processing * Other Magnesia Products * Mining and Processing Magnesite * The Physical and Chemical Properties of Magnesium Oxide * Water and Wastewater Application for Magnesia Products * Magnesia in Polymer Applications * The Role of Magnesium in Animal, Plants, and Human Nutrition * Magnesium Salts and Magnesium Metal * The Formation and Occurrence of Magnesite * Calcination of Magnesium Hydroxide and Carbonate * Miscellaneous Magnesia Applications
Download or read book Magnesium Technology written by Horst E. Friedrich and published by Springer Science & Business Media. This book was released on 2006-01-16 with total page 696 pages. Available in PDF, EPUB and Kindle. Book excerpt: Magnesium, with a density of 1.74 g/cm2, is the lightest structural metal and magnesium are increasingly chosen for weight-critical applications such as in land-based transport systems. "Magnesium Technology" substantially updates and complements existing reference sources on this key material. It assembles international contributions from seven countries covering a wide range of research programs into new alloys with the requisite property profiles, i.e., the current state of both research and technological applications of magnesium. In particular, the international team of authors covers key topics, such as: casting and wrought alloys; fabrication methods; corrosion and protection; engineering requirements and strategies, with examples from the automobile, aerospace, and consumer-goods industries, and recycling. This authoritative reference and overview addresses materials researchers as well as design engineers.
Download or read book Magnesium Technology 2019 written by Vineet V. Joshi and published by Springer. This book was released on 2019-02-13 with total page 370 pages. Available in PDF, EPUB and Kindle. Book excerpt: The Magnesium Technology Symposium, the event on which this collection is based, is one of the largest yearly gatherings of magnesium specialists in the world. Papers represent all aspects of the field, ranging from primary production to applications to recycling. Moreover, papers explore everything from basic research findings to industrialization. Magnesium Technology 2019 covers a broad spectrum of current topics, including alloys and their properties; cast products and processing; wrought products and processing; forming, joining, and machining; corrosion and surface finishing; and structural applications. In addition, there is coverage of new and emerging applications.
Download or read book Magnesium Technology 2001 written by John N. Hryn and published by John Wiley & Sons. This book was released on 2013-09-23 with total page 477 pages. Available in PDF, EPUB and Kindle. Book excerpt: Papers presented at the Proceedings of the symposium jointly sponsored by the Magnesium Committee and Reactive Metals Committee of the TMS Light Metals Division (LMD), the International Magnesium Association, and the Corrosion and Environmental Effects Committee, a joint committee of the TMS Structural Materials Division (SMD) and the ASM International Materials Science Critical Technology Sector, held during the 2001 TMS Annual Meeting in New Orleans, Louisiana, U.S.A, February 11-15, 2001.
Download or read book Magnesium Technology 2014 written by Martyn Alderman and published by Springer. This book was released on 2016-12-06 with total page 502 pages. Available in PDF, EPUB and Kindle. Book excerpt: The Magnesium Technology Symposium, the event on which this collection is based, is one of the largest yearly gatherings of magnesium specialists in the world. Papers in this collection represent all aspects of the field, ranging from primary production to applications to recycling. Moreover, papers explore everything from basic research findings to industrialization. This volume covers a broad spectrum of current topics, including alloys and their properties; cast products and processing; wrought products and processing; forming, joining, and machining; corrosion and surface finishing; ecology; and structural applications. In addition, there is coverage of new and emerging applications in such areas as hydrogen storage.
Download or read book Magnesium Technology 2012 written by Suveen Mathaudhu and published by Springer. This book was released on 2016-12-19 with total page 571 pages. Available in PDF, EPUB and Kindle. Book excerpt: The Magnesium Technology Symposium, which takes place every year at the TMS Annual Meeting & Exhibition, is one of the largest yearly gatherings of magnesium specialists in the world. Papers are presented in all aspects of the field, ranging from primary production to applications to recycling. Moreover, papers explore everything from basic research findings to industrialization. Magnesium Technology 2011 covers a broad spectrum of current topics, including alloys and their properties; cast products and processing; wrought products and processing; forming, joining, and machining; corrosion and surface finishing; ecology; and structural applications. In addition, you'll find coverage of new and emerging applications in such areas as biomedicine and hydrogen storage.
Download or read book Magnesium Technology 2011 written by Wim Sillekens and published by Springer. This book was released on 2016-12-10 with total page 649 pages. Available in PDF, EPUB and Kindle. Book excerpt: The Magnesium Technology Symposium, which takes place every year at the TMS Annual Meeting & Exhibition, is one of the largest yearly gatherings of magnesium specialists in the world. Papers are presented in all aspects of the field, ranging from primary production to applications to recycling. Moreover, papers explore everything from basic research findings to industrialization. Magnesium Technology 2011 covers a broad spectrum of current topics, including alloys and their properties; cast products and processing; wrought products and processing; forming, joining, and machining; corrosion and surface finishing; ecology; and structural applications. In addition, you'll find coverage of new and emerging applications in such areas as biomedicine and hydrogen storage.
Download or read book Magnesium Technology 2023 written by Steven Barela and published by Springer Nature. This book was released on 2023-02-05 with total page 215 pages. Available in PDF, EPUB and Kindle. Book excerpt: The Magnesium Technology Symposium at the TMS Annual Meeting & Exhibition is one of the largest yearly gatherings of magnesium specialists in the world. Papers represent all aspects of the field, ranging from primary production to applications and recycling. Moreover, papers explore everything from basic research findings to industrialization. Magnesium Technology 2023 is a definitive reference that covers a broad spectrum of current topics, including novel extraction techniques; primary production; alloys and their production; integrated computational materials engineering; thermodynamics and kinetics; plasticity mechanisms; cast products and processing; wrought products and processing; forming, joining, and machining; corrosion and surface finishing; fatigue and fracture; dynamic response; structural applications; degradation and biomedical applications; emerging applications; additive manufacturing of powders; and recycling, ecological issues, and life cycle analysis.
Download or read book Magnesium Technology 2015 written by Michele Manuel and published by Springer. This book was released on 2016-12-26 with total page 497 pages. Available in PDF, EPUB and Kindle. Book excerpt: The Magnesium Technology Symposium, the event on which this collection is based, is one of the largest yearly gatherings of magnesium specialists in the world. Papers represent all aspects of the field, ranging from primary production to applications to recycling. Moreover, papers explore everything from basic research findings to industrialization. Magnesium Technology 2015 covers a broad spectrum of current topics, including alloys and their properties; cast products and processing; wrought products and processing; forming, joining, and machining; corrosion and surface finishing; ecology; and structural applications. In addition, there is coverage of new and emerging applications.
Download or read book Magnesium Technology 2018 written by Dmytro Orlov and published by Springer. This book was released on 2018-01-26 with total page 448 pages. Available in PDF, EPUB and Kindle. Book excerpt: The Magnesium Technology Symposium, the event on which this collection is based, is one of the largest yearly gatherings of magnesium specialists in the world. Papers represent all aspects of the field, ranging from primary production to applications to recycling. Moreover, papers explore everything from basic research findings to industrialization. Magnesium Technology 2017 covers a broad spectrum of current topics, including alloys and their properties; cast products and processing; wrought products and processing; forming, joining, and machining; corrosion and surface finishing; ecology; and structural applications. In addition, there is coverage of new and emerging applications.
Download or read book Magnesium Technology 2016 written by Alok Singh and published by Springer. This book was released on 2016-12-12 with total page 402 pages. Available in PDF, EPUB and Kindle. Book excerpt: The Magnesium Technology Symposium, the event on which this collection is based, is one of the largest yearly gatherings of magnesium specialists in the world. Papers represent all aspects of the field, ranging from primary production to applications to recycling. Moreover, papers explore everything from basic research findings to industrialization. Magnesium Technology 2016 covers a broad spectrum of current topics, including alloys and their properties; cast products and processing; wrought products and processing; forming, joining, and machining; corrosion and surface finishing; ecology; and structural applications. In addition, there is coverage of new and emerging applications.
