Download or read book Crosslinked Macromolecular Systems written by Włodzimierz Klonowski and published by BioLingua Bioengineering. This book was released on 2009-11 with total page 168 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Complex Macromolecular Systems I written by Axel H. E. Müller and published by Springer. This book was released on 2010-07-20 with total page 264 pages. Available in PDF, EPUB and Kindle. Book excerpt: -Effects of Electric Fields on Block Copolymer Nanostructures By H. G. Schoberth, V. Olszowka, K. Schmidt, and A. Böker -Nanopattern Evolution in Block Copolymer Films: Experiment, Simulations and Challenges By L. Tsarkova, G.J. Agur Sevink, and G. Krausch -Controlled Wrinkling as a Novel Method for the Fabrication of Patterned Surfaces By A. Schweikart, A. Horn, A. Böker, and A. Fery -Layered Systems Under Shear Flow By D. Svenšek and H. R. Brand -Thermal Diffusion in Polymer Blends: Criticality and Pattern Formation By W. Köhler, A. Krekhov, and W. Zimmermann -Foaming of Microstructured and Nanostructured Polymer Blends By H. Ruckdäschel, P. Gutmann, V. Altstädt, H. Schmalz, and A.H.E. Müller
Download or read book Ordering in Macromolecular Systems written by Akio Teramoto and published by Springer Science & Business Media. This book was released on 2012-12-06 with total page 349 pages. Available in PDF, EPUB and Kindle. Book excerpt: This volume summarizes the papers presented at the First Osaka University Macromolecular Symposium OUMS'93 on "Ordering in Macromolecular Systems", which was held at Senri Life Science Center, Osaka, Japan, on June 3 through June 6, 1993. The symposium covered the three topics, (1) Crystallization and Phase Transitions, (2) Polymer Liquid Crystals and (3) Block Copolymers, Polymer Blends and Surfaces, and invited leading scientists in these fields. At present any of these topics is a hot issue in itself and frequently taken up separately in many occasions. It is noted however that all these topics are correlated with each other with the keyword "Ordering" and their combination provides a unique feature of the present symposium in reflecting the interactions among investigators working in these important fields with the common ground expressed by the keyword "Ordering". Nineteen invited lectures and 40 posters of both experiment and theory were presented at the symposium, and the eighteen lectures and ten poster presentations contribute to this volume. In the first topic crystal structures and their transitions were discussed from kinetic as well as static points of view; attention was paid to give a molecular-level interpretation of the structure, phase transition and physical properties, using theories and simulations. The second topic was mainly concerned with static structures and thermodynamic properties of polymer liquid crystals including phase behaviours.
Download or read book Solitons in Macromolecular Systems written by Leonid Isaakovich Manevich and published by Nova Publishers. This book was released on 2008 with total page 142 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book addresses the issue of non-linear problems that have dominated the forefront of physics. To analyse these problems, it is necessary to develop mathematical methods to match new concepts. In this connection, for the first time in a long time, the same key notions have attracted the attention of physicists and mathematicians. This book discusses how the role of such excitations in essentially non-linear systems is similar to that of harmonic oscillations and waves in linear physical models.
Download or read book Rotational Isomeric State Models in Macromolecular Systems written by Matthias Rehan and published by Springer. This book was released on 2006-05-09 with total page 490 pages. Available in PDF, EPUB and Kindle. Book excerpt: Over the past 40 years, RIS models for hundreds of polymer structures have been developed, and now the RIS approach is available in several software packages. However, users are often faced with the time-consuming task of finding the appropriate RIS parameters among the literature. This book facilitates this task by providing a comprehensive overview of the models available. It reviews the literature from the very first applications to the end of 1994, comprises synthetic as well as naturally occuring macromolecules, and tabulates all the pertinent features of published models. It will thus help readers, even those new to this method, to take advantage of this computationally efficient way of assessing the conformational properties of macromolecular systems.
Download or read book Complex Macromolecular Systems II written by Axel H. E. Müller and published by Springer. This book was released on 2010-07-20 with total page 221 pages. Available in PDF, EPUB and Kindle. Book excerpt: -Polyelectrolyte Stars and Cylindrical Brushes By Y. Xu, F. Plamper, M. Ballauff, and A. H. E. Müller -Various Aspects of the Interfacial Self-Assembly of Nanoparticles By N. Popp, S. Kutuzov, A. Böker -Holographic Gratings and Data Storage in Azobenzene-Containing Block Copolymers and Molecular Glasses By H. Audorff, K. Kreger, R. Walker, D. Haarer, L. Kador, and H.-W. Schmidt -Donor–Acceptor Block Copolymers with Nanoscale Morphology for Photovoltaic Applications By M. Sommer, S. Huettner, and M. Thelakkat -Recent Advances in the Improvement of Polymer Electret Films By D. P. Erhard, D. Lovera, C. von Salis-Soglio, R. Giesa, V. Altstädt, and H.-W. Schmidt
Download or read book Thermodynamics and Statistical Mechanics of Macromolecular Systems written by Michael Bachmann and published by Cambridge University Press. This book was released on 2014-04-24 with total page 359 pages. Available in PDF, EPUB and Kindle. Book excerpt: The structural mechanics of proteins that fold into functional shapes, polymers that aggregate and form clusters, and organic macromolecules that bind to inorganic matter can only be understood through statistical physics and thermodynamics. This book reviews the statistical mechanics concepts and tools necessary for the study of structure formation processes in macromolecular systems that are essentially influenced by finite-size and surface effects. Readers are introduced to molecular modeling approaches, advanced Monte Carlo simulation techniques, and systematic statistical analyses of numerical data. Applications to folding, aggregation, and substrate adsorption processes of polymers and proteins are discussed in great detail. Particular emphasis is placed on the reduction of complexity by coarse-grained modeling, which allows for the efficient, systematic investigation of structural phases and transitions. Providing insight into modern research at this interface between physics, chemistry, biology, and nanotechnology, this book is an excellent reference for graduate students and researchers.
Download or read book Molecular Interactions and Time Space Organization in Macromolecular Systems written by Yotaro Morishima and published by Springer Science & Business Media. This book was released on 2012-12-06 with total page 194 pages. Available in PDF, EPUB and Kindle. Book excerpt: Structural organization or disorganization in macromolecular systems has been an important subject of polymer physical chemistry during the last one or two decades. This volume summarizes the main lectures presented at the Osaka University Macromolecular Symposium OUMS '98 on Molecular Interactions and Time-Space Organization in Macromolecular Systems, where the following topics were discussed:crystallization kinetics, liquid crystals, phase separation, gelation, adhesion, complex formation, and self-organization, with emphasis on molecular interactions. Both these topics are hot issues at present and frequently are taken up as a main theme at a particular symposium. The present symposium invited leading theorists and experimentalists in these fields as guest speakers and is expected to attract the interest of a significant range of readers.
Download or read book Complex Macromolecular Systems I written by Axel H. E. Müller and published by Springer Science & Business Media. This book was released on 2010-05-20 with total page 264 pages. Available in PDF, EPUB and Kindle. Book excerpt: -Effects of Electric Fields on Block Copolymer Nanostructures By H. G. Schoberth, V. Olszowka, K. Schmidt, and A. Böker -Nanopattern Evolution in Block Copolymer Films: Experiment, Simulations and Challenges By L. Tsarkova, G.J. Agur Sevink, and G. Krausch -Controlled Wrinkling as a Novel Method for the Fabrication of Patterned Surfaces By A. Schweikart, A. Horn, A. Böker, and A. Fery -Layered Systems Under Shear Flow By D. Svenšek and H. R. Brand -Thermal Diffusion in Polymer Blends: Criticality and Pattern Formation By W. Köhler, A. Krekhov, and W. Zimmermann -Foaming of Microstructured and Nanostructured Polymer Blends By H. Ruckdäschel, P. Gutmann, V. Altstädt, H. Schmalz, and A.H.E. Müller
Download or read book Macromolecular Engineering written by Alex Lubnin and published by Elsevier. This book was released on 2021-02-26 with total page 308 pages. Available in PDF, EPUB and Kindle. Book excerpt: Macromolecular Engineering: Design, Synthesis and Application of Polymers explores the role of macromolecular engineering in the development of polymer systems with engineered structures that offer the desired combination of properties for advanced applications. This book is organized into sections covering theory and principles, science and technology, architectures and technologies, and applications, with an emphasis on the latest advances in techniques, materials, properties, and end uses - and including recently commercialized, or soon to be commercialized, designed polymer systems. The chapters are contributed by a group of leading figures who are actively researching in the field. This is an invaluable resource for researchers and scientists interested in polymer synthesis and design, across the fields of polymer chemistry, polymer science, plastics engineering, and materials science and engineering. In industry, this book supports engineers, R&D, and scientists working on polymer design for application areas such as biomedical and healthcare, automotive and aerospace, construction and consumer goods. Presents the theory, principles, architectures, technologies, and latest advances in macromolecular engineering for polymer design and synthesis Explains polymer design for cutting-edge applications areas, including coatings, automotive, industrial, household and medical uses Approaches several novel materials, such as polyisobutylene (PIB), polyamide-based polyurethanes, and aliphatic polyesters
Download or read book Complex Macromolecular Systems II written by Axel H. E. Müller and published by Springer Science & Business Media. This book was released on 2010-05-21 with total page 221 pages. Available in PDF, EPUB and Kindle. Book excerpt: -Polyelectrolyte Stars and Cylindrical Brushes By Y. Xu, F. Plamper, M. Ballauff, and A. H. E. Müller -Various Aspects of the Interfacial Self-Assembly of Nanoparticles By N. Popp, S. Kutuzov, A. Böker -Holographic Gratings and Data Storage in Azobenzene-Containing Block Copolymers and Molecular Glasses By H. Audorff, K. Kreger, R. Walker, D. Haarer, L. Kador, and H.-W. Schmidt -Donor–Acceptor Block Copolymers with Nanoscale Morphology for Photovoltaic Applications By M. Sommer, S. Huettner, and M. Thelakkat -Recent Advances in the Improvement of Polymer Electret Films By D. P. Erhard, D. Lovera, C. von Salis-Soglio, R. Giesa, V. Altstädt, and H.-W. Schmidt
Download or read book Macromolecular Chemistry 8 written by K. Saarela and published by Elsevier. This book was released on 2013-10-22 with total page 468 pages. Available in PDF, EPUB and Kindle. Book excerpt: Macromolecular Chemistry—8 focuses on the molecular configuration of polymers, charge-transfer complexes, polymerization reactions, molecular weight fractionation, and polymer systems. The selection first offers information on molecular configuration in bulk polymers and control of monomer reactivity in copolymerization. Discussions focus on thermodynamic behavior of concentrated polymer solutions; direct measurement of molecular dimensions; and modification of monomer reactivity in radical copolymerization. The book also ponders on non-equimolar compositions from comonomer charge-transfer complexes and preparation of oligomers with functional end groups by polymerization reactions. The text examines cooperative interactions of complementary synthetic macromolecules in solutions and molecular weight fractionation on the basis of solubility. Topics include interactions of chemically complementary molecules and conformational transitions and methods for evaluating the molecular size distribution of the original polymer. The book also tackles alkylaluminium compounds in carbenium ion polymerization and thermodynamics of multicomponent polymer systems. The selection is a dependable reference for readers interested in the molecular configuration of polymers, complexes, and polymer systems.
Download or read book Fluid Flow Through Porous Macromolecular Systems written by Frederik W. Wiegel and published by Springer. This book was released on 1980 with total page 116 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Macromolecular Engineering written by S. Kobayashi and published by Springer Science & Business Media. This book was released on 2012-12-06 with total page 326 pages. Available in PDF, EPUB and Kindle. Book excerpt: This volume Macromolecular Engineering: Recent Advances has been developed based on the 1 st International Conference on "Advanced Polymers Via Macromolecular Engineering" (APME '95), June 24-29, 1995 at the Vassar College campus, Poughkeepsie, New York. In APME '95, 100 oral and over 50 poster presentations are to be delivered from scientists around the globe. The scientific program covers recent advances in macromolecu lar engineering. It is our vision that the knowledge of the past and the promise of the future are blended together in APME '95 to enrich and stimulate the scientists, which will bring about the progress of macromolecular engineering. Scientists from over 30 countries will be joining together to share this vision. Although over 150 papers are to be presented in APME '95 conference, we could not include all the papers in this book for a variety of reasons, most importantly the authors willingness to contribute to this volume in time to meet the deadline. However, the 24 comprehensive chapters included in this volume are a true reflection of some of the important themes of macromolecular engineering that are part of the APME '95 conference. We believe macromolecular engineering is the key to developing new polymeric materials and, to this end, it is hoped this volume will aid in this introspection.
Download or read book Coulombic Interactions in Macromolecular Systems written by Adi Eisenberg and published by Washington, D.C. : The Society. This book was released on 1986 with total page 288 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Thermodynamics and Statistical Mechanics of Macromolecular Systems written by Michael Bachmann and published by Cambridge University Press. This book was released on 2014-04-24 with total page 359 pages. Available in PDF, EPUB and Kindle. Book excerpt: Reviewing statistical mechanics concepts for analysis of macromolecular structure formation processes, for graduate students and researchers in physics and biology.
Download or read book Spectroscopy of Partially Ordered Macromolecular Systems written by Jaroslav Kahovec and published by Wiley-VCH. This book was released on 2005-05-12 with total page 192 pages. Available in PDF, EPUB and Kindle. Book excerpt: The papers in the volume tackle most important aspects of examining partial order, either natural or induced by mechanical or chemical treatment of the system and cover a wide variety of experimental and theoretical methods such as NMR and Raman spectroscopy.
