Download or read book Macromolecular Physics V1 written by Bernhard Wunderlich and published by Elsevier. This book was released on 2012-12-02 with total page 564 pages. Available in PDF, EPUB and Kindle. Book excerpt: Macromolecular Physics, Volume 1: Crystal Structure, Morphology, Defects provides a unified treatment of crystals of linear macromolecules. This book is organized into four chapters: structure of macromolecules, microscopic structure of crystals, crystal morphology, and defect crystal. This publication specifically discusses the macromolecular hypothesis, molecular conformation, and synthesis of macromolecules. The discovery and proof of the lattice theory, structures of minimum free energy, and crystal structures of macromolecules are also deliberated. This publication likewise covers the macromolecular crystals, macroscopic recognition of defects, and deformation of polymer crystals. This volume is a good reference for physicists, scientists, and specialists concerned with research on crystals of linear macromolecules.
Download or read book Macromolecular Physics written by Bernhard Wunderlich and published by Academic Press. This book was released on 2013-10-22 with total page 381 pages. Available in PDF, EPUB and Kindle. Book excerpt: This third volume completes the first part of the project " Macromolecular Physics." The first volume dealt with the description of macromolecular crystals; the second volume dealt with crystal growth; and the third volume summarizes our knowledge of the melting of linear, flexible macromolecules. The discussion in the three volumes goes from reasonably well-established topics, such as the structure, morphology, and defects in crystals, to topics still in flux, such as crystal nucleation, detailed growth mechanisms, and annealing processes, to arrive at the present topics of equilibrium, nonequilibrium, and copolymer melting. Our knowledge is quite limited on many aspects of these latter topics.
Download or read book Macromolecular Engineering Volume 1 written by Krzysztof Matyjaszewski and published by Wiley-VCH. This book was released on 2007-04-09 with total page 664 pages. Available in PDF, EPUB and Kindle. Book excerpt: The book provides a state of the art description of the synthetic tools to precisely control various aspects of macromolecular structure including chain composition, microstructure, functionality and topology as well as modern characterization techniques at molecular and macroscopic level for various properties of well-defined (co)polymers in solution, bulk and at surfaces. The book addresses also the correlation of molecular structure with macroscopic properties additionally affected by processing. Finally, some emerging applications for the (co)polymers are highlighted.
Download or read book Macromolecules 1 written by H.G. Elias and published by Springer Science & Business Media. This book was released on 2012-12-06 with total page 554 pages. Available in PDF, EPUB and Kindle. Book excerpt: The second edition of this textbook is identical with its fourth German edi tion and it thus has the same goals: precise definition of basic phenomena, a broad survey of the whole field, integrated representation of chemistry, physics, and technology, and a balanced treatment of facts and comprehen sion. The book thus intends to bridge the gap between the often oversimpli fied introductory textbooks and the highly specialized texts and monographs that cover only parts of macromolecular science. The text intends to survey the whole field of macromolecular science. Its organization results from the following considerations. The chemical structure of macromolecular compounds should be inde pendent of the method of synthesis, at least in the ideal case. Part I is thus concerned with the chemical and physical structure of polymers. Properties depend on structure. Solution properties are thus discussed in Part 11, solid state properties in Part Ill. There are other reasons for dis cussing properties before synthesis: For example, it is difficult to understand equilibrium polymerization without knowledge of solution thermodynamics, the gel effect without knowledge of the glass transition temperature, etc. Part IV treats the principles of macromolecular syntheses and reactions.
Download or read book Macromolecular Physics V2 written by Bernhard Wunderlich and published by Elsevier. This book was released on 2012-12-02 with total page 476 pages. Available in PDF, EPUB and Kindle. Book excerpt: Macromolecular Physics, Volume 2: Crystal Nucleation, Growth, Annealing continues the discussion of crystals of linear macromolecules. The text also gives conclusion about the description and formation of crystals. The book covers topics such as the primary, secondary, and tertiary nucleation of crystals; the general growth of crystals; solution and melt crystallization of macromolecules; and the general annealing of crystals. For those who wish to do further reading, the table of contents of Volume 1 is included in the book. The text is recommended for macromolecular physicists, especially those whose focus is on the study of crystals and its different properties.
Download or read book Macromolecules written by Hans-Georg Elias and published by Springer Science & Business Media. This book was released on 2013-06-29 with total page 1228 pages. Available in PDF, EPUB and Kindle. Book excerpt: Like so many of its kind, this textbook originated from the requirements of teaching. While lecturing on macromolecular science as a required subject for chemists and materials scientists on the undergraduate, graduate, and postgraduate levels at Swiss Federal Institute of Technology at Zurich (1960-1971), I needed a one-volume textbook which treated the whole field of macromolecular science, from its chemistry and physics to its applications, in a not too elementary manner. This textbook thus intends to bridge the gap between the often oversimplified introductory books and the highly specialized texts and monographs that cover only parts of macromolecular science. This first English edition is based on the third German edition (1975), which is about 40% different from the first German edition (1971), a result of rapid progress in macromolecular science and the less rapid education of the writer. This text intends to survey the whole field of macromolecular science. Its organization results from the following considerations. The chemical structure of macromolecular compounds should be independent of the method of synthesis, at least in the ideal case. Part I is thus concerned with the chemical and physical structure of macro molecules. Properties depend on structure. Solution properties are thus discussed in Part II, solid state properties in Part III. There are other reasons for discussing properties before syntheses: For example, it is difficult to under stand equilibrium polymerization without knowledge of solution thermody of the glass temperature, etc.
Download or read book Glass written by Jürn W. P. Schmelzer and published by Walter de Gruyter GmbH & Co KG. This book was released on 2014-05-21 with total page 578 pages. Available in PDF, EPUB and Kindle. Book excerpt: “This book contains overviews on technologically important classes of glasses, their treatment to achieve desired properties, theoretical approaches for the description of structure-property relationships, and new concepts in the theoretical treatment of crystallization in glass-forming systems. It contains overviews about the state of the art and about specific features for the analysis and application of important classes of glass-forming systems, and describes new developments in theoretical interpretation by well-known glass scientists. Thus, the book offers comprehensive and abundant information that is difficult to come by or has not yet been made public.” Edgar Dutra Zanotto (Center for Research, Technology and Education in Vitreous Materials, Brazil) Glass, written by a team of renowned researchers and experienced book authors in the field, presents general features of glasses and glass transitions. Different classes of glassforming systems, such as silicate glasses, metallic glasses, and polymers, are exemplified. In addition, the wide field of phase formation processes and their effect on glasses and their properties is studied both from a theoretical and experimental point of view.
Download or read book Water Relationships in Foods written by Harry Levine and published by Springer Science & Business Media. This book was released on 2013-11-21 with total page 825 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book was developed from the papers presented at a symposium on "Water Relationships in Foods," which was held from April 10-14, 1989 at the 197th National Meeting of the American Chemical Society in Dallas, Texas, under the auspices of the Agricultural and Food Chemistry Division of ACS. The editors of this book organized the symposium to bring tagether an es teemed group of internationally respected experts, currently active in the field of water relationships in foods, to discuss recent advances in the 1980's and future trends for the 1990's. It was the hope of all these con tributors that this ACS symposium would become a memorable keystone above the foundation underlying the field of "water in foods. " This strong foundation has been constructed in large part from earlier technical conferences and books such as the four milestone International Symposia on the Properties of Water (ISOPOW I-IV), the recent IFT BasicSymposium on "Water Activity" and Penang meeting on Food Preservation by Maisture Control, as well as the key fundamental contributions from the classic 1980 ACS Symposium Series #127 on Water in Polymers, and from Felix Franks' famous seven-volume Comprehensive Treatise on Water plus five subsequent volumes of the ongoing Water Science Reviews. The objective of the 1989 ACS symposiumwas to build on this foun dation by emphasizing the most recent and maj or advanc.
Download or read book Thermodynamics of Systems Containing Flexible Chain Polymers written by V.J. Klenin and published by Elsevier. This book was released on 1999-06-03 with total page 851 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book deals with the problems of the thermodynamics of systems containing flexible-chain polymers as the basis of polymer material science. The main thermodynamic quantities and concepts are introduced and discussed in the order of the objects getting more and more complicated: gases, magnets, low-molecular-weight substances and mixtures, and finally, polymers and polymer blends.All topics are considered in a common clue, using the principle of universality. The stability conditions for the one-phase state of multi-component systems are given. Phase separation is regarded as a result of loss in stability. The critical state of a system, with the one-phase state being close to the boundary of stability conditions breaking, is discussed in detail. The effects of both light scattering (elastic and dynamic) and diffusion, as directly depending on the thermodynamic parameters characterizing the one-phase state stability, are considered in detail. One of the versions of colloid scattering, namely, the turbidity spectrum method, is described as useful for the characterization of various heterogeneous structures and for the phase analysis of polymer systems. In the approximation of mean field theories and advanced field theory, formalisms expound the following divisions of the thermodynamics of binary and polynary systems with flexible-chain polymers: conformation of the polymer coil, composition fluctuations, elastic and dynamic light scattering, diffusion in the one-phase state (including the critical range), phase separation, polymer fractionation, the coil-globule transition, phase equilibrium and separation in the system network polymer + low-molecular-weight liquid, polymer blends and multiphase separation.
Download or read book Crystallization in Multiphase Polymer Systems written by Sabu Thomas and published by Elsevier. This book was released on 2017-09-15 with total page 612 pages. Available in PDF, EPUB and Kindle. Book excerpt: Crystallization in Multiphase Polymer Systems is the first book that explains in depth the crystallization behavior of multiphase polymer systems. Polymeric structures are more complex in nature than other material structures due to their significant structural disorder. Most of the polymers used today are semicrystalline, and the subject of crystallization is still one of the major issues relating to the performance of semicrystalline polymers in the modern polymer industry. The study of the crystallization processes, crystalline morphologies and other phase transitions is of great significance for the understanding the structure-property relationships of these systems. Crystallization in block copolymers, miscible blends, immiscible blends, and polymer composites and nanocomposites is thoroughly discussed and represents the core coverage of this book. The book critically analyzes the kinetics of nucleation and growth process of the crystalline phases in multi-component polymer systems in different length scales, from macro to nanoscale. Various experimental techniques used for the characterization of polymer crystallization process are discussed. Written by experts in the field of polymer crystallization, this book is a unique source and enables professionals and students to understand crystallization behavior in multiphase polymer systems such as block copolymers, polymer blends, composites and nanocomposites. - Covers crystallization of multiphase polymer systems, including copolymers, blends and nanocomposites - Features comprehensive, detailed information about the basic research, practical applications and new developments for these polymeric materials - Analyzes the kinetics of nucleation and growth process of the crystalline phases in multi-component polymer systems in different length scales, from macro to nanoscale
Download or read book Polymer Colloids written by Rodney Priestley and published by Royal Society of Chemistry. This book was released on 2019-12-02 with total page 442 pages. Available in PDF, EPUB and Kindle. Book excerpt: Academic and industrial research around polymer-based colloids is huge, driven both by the development of mature technologies, e.g. latexes for coatings, as well as the advancement of new materials and applications, such as building blocks for 2D/3D structures and medicine. Edited by two world-renowned leaders in polymer science and engineering, this is a fundamental text for the field. Based on a specialised course by the editors, this book provides the reader with an invaluable single source of reference. The first section describes formation, explaining basic properties of emulsions and dispersion polymerization, microfluidic approaches to produce polymer-based colloids and formation via directed self-assembly. The next section details characterisation methodologies from microscopy and small angle scattering, to surface science and simulations. The final chapters close with applications, including Pickering emulsions and molecular engineering for materials development. A comprehensive guide to polymer colloids, with contributions by leaders in their respective areas, this book is a must-have for researchers and practitioners working across polymers, soft matter and chemical and molecular engineering.
Download or read book Raman Scattering in Materials Science written by Willes H. Weber and published by Springer Science & Business Media. This book was released on 2013-04-18 with total page 509 pages. Available in PDF, EPUB and Kindle. Book excerpt: Raman scattering is now being applied with increasing success to a wide range of practical problems at the cutting edge of materials science. The purpose of this book is to make Raman spectroscopy understandable to the non-specialist and thus to bring it into the mainstream of routine materials characterization. The book is pedagogical in approach and focuses on technologically important condensed-matter systems in which the specific use of Raman spectroscopy yields new and useful information. Included are chapters on instrumentation, bulk semiconductors and alloys, heterostructures, high-Tc superconductors, catalysts, carbon-based materials, wide-gap and super-hard materials, and polymers.
Download or read book Interphases and Mesophases in Polymer Crystallization II written by Giuseppe Allegra and published by Springer. This book was released on 2005-08-25 with total page 215 pages. Available in PDF, EPUB and Kindle. Book excerpt: With contribution by numerous experts.
Download or read book Physico chemical Aspects of Textile Coloration written by Stephen M. Burkinshaw and published by John Wiley & Sons. This book was released on 2016-02-08 with total page 642 pages. Available in PDF, EPUB and Kindle. Book excerpt: The production of textile materials comprises a very large and complex global industry that utilises a diverse range of fibre types and creates a variety of textile products. As the great majority of such products are coloured, predominantly using aqueous dyeing processes, the coloration of textiles is a large-scale global business in which complex procedures are used to apply different types of dye to the various types of textile material. The development of such dyeing processes is the result of substantial research activity, undertaken over many decades, into the physico-chemical aspects of dye adsorption and the establishment of ‘dyeing theory’, which seeks to describe the mechanism by which dyes interact with textile fibres. Physico-Chemical Aspects of Textile Coloration provides a comprehensive treatment of the physical chemistry involved in the dyeing of the major types of natural, man-made and synthetic fibres with the principal types of dye. The book covers: fundamental aspects of the physical and chemical structure of both fibres and dyes, together with the structure and properties of water, in relation to dyeing; dyeing as an area of study as well as the terminology employed in dyeing technology and science; contemporary views of intermolecular forces and the nature of the interactions that can occur between dyes and fibres at a molecular level; fundamental principles involved in dyeing theory, as represented by the thermodynamics and kinetics of dye sorption; detailed accounts of the mechanism of dyeing that applies to cotton (and other cellulosic fibres), polyester, polyamide, wool, polyacrylonitrile and silk fibres; non-aqueous dyeing, as represented by the use of air, organic solvents and supercritical CO2 fluid as alternatives to water as application medium. The up-to-date text is supported by a large number of tables, figures and illustrations as well as footnotes and widespread use of references to published work. The book is essential reading for students, teachers, researchers and professionals involved in textile coloration.
Download or read book Fundamental Polymer Science written by Ulf W. Gedde and published by Springer Nature. This book was released on 2019-12-20 with total page 501 pages. Available in PDF, EPUB and Kindle. Book excerpt: This successor to the popular textbook, “Polymer Physics” (Springer, 1999), is the result of a quarter-century of teaching experience as well as critical comments from specialists in the various sub-fields, resulting in better explanations and more complete coverage of key topics. With a new chapter on polymer synthesis, the perspective has been broadened significantly to encompass polymer science rather than “just” polymer physics. Polysaccharides and proteins are included in essentially all chapters, while polyelectrolytes are new to the second edition. Cheap computing power has greatly expanded the role of simulation and modeling in the past two decades, which is reflected in many of the chapters. Additional problems and carefully prepared graphics aid in understanding. Two principles are key to the textbook’s appeal: 1) Students learn that, independent of the origin of the polymer, synthetic or native, the same general laws apply, and 2) students should benefit from the book without an extensive knowledge of mathematics. Taking the reader from the basics to an advanced level of understanding, the text meets the needs of a wide range of students in chemistry, physics, materials science, biotechnology, and civil engineering, and is suitable for both masters- and doctoral-level students. Praise for the previous edition: ...an excellent book, well written, authoritative, clear and concise, and copiously illustrated with appropriate line drawings, graphs and tables. - Polymer International ...an extremely useful book. It is a pleasure to recommend it to physical chemists and materials scientists, as well as physicists interested in the properties of polymeric materials. - Polymer News This valuable book is ideal for those who wish to get a brief background in polymer science as well as for those who seek a further grounding in the subject. - Colloid Polymer Science The solutions to the exercises are given in the final chapter, making it a well thought-out teaching text. - Polymer Science
Download or read book Current Catalog written by National Library of Medicine (U.S.) and published by . This book was released on 1983 with total page 1442 pages. Available in PDF, EPUB and Kindle. Book excerpt: First multi-year cumulation covers six years: 1965-70.
Download or read book Polymeric Materials Encyclopedia Twelve Volume Set written by Joseph C. Salamone and published by CRC Press. This book was released on 2020-07-17 with total page 554 pages. Available in PDF, EPUB and Kindle. Book excerpt: The Polymeric Materials Encyclopedia presents state-of-the-art research and development on the synthesis, properties, and applications of polymeric materials. This groundbreaking work includes the largest number of contributors in the world for a reference publication in polymer science, and examines many fields not covered in any other reference. With multiple articles on many subjects, the encyclopedia offers you a broad-based perspective on a multitude of topics, as well as detailed research information, figures, tables, illustrations, and references. Updates published as new research unfolds will continue to provide you with the latest advances in polymer science, and will keep the encyclopedia at the forefront of the field well into the future. From novices to experienced researchers in the field, anyone and everyone working in polymer science today needs this complete assessment of the state of the art. The entire 12-volume set will be available in your choice of printed or CD-ROM format.
