Download or read book Machining of Polymer Composites written by Jamal Ahmad and published by Springer Science & Business Media. This book was released on 2009-04-21 with total page 321 pages. Available in PDF, EPUB and Kindle. Book excerpt: This excellent volume will serve as an indispensable reference and source book for process design, tool and production engineers in composite manufacturing. It provides the reader with a comprehensive treatment of the theory of machining as it applies to fiber reinforced polymer composites. It covers the latest technical advances in the area of machining and tooling, and discusses the applications of fiber reinforced polymer composites in the aircraft and automotive industries.

Download or read book Machining and Machinability of Fiber Reinforced Polymer Composites written by Mohamed Thariq Hameed Sultan and published by Springer Nature. This book was released on 2020-12-22 with total page 346 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book covers current advances and practices in machining fibre-reinforced polymer composites under various conventional and nonconventional processes. It presents recent research and practices for effective and efficient machining of difficult-to-cut material, providing the technological ‘know-how’ on delamination-free of drilling, milling, trimming, and other cutting processes on fibre-reinforced polymer composites. It also guides the reader on the selection of optimum machining parameters, tool materials, as well as tool geometry. This book is of interest to academicians, students, researchers, practitioners, and industrialists working in aerospace, automotive, marine, and construction industries.

Download or read book Manufacturing of Polymer Composites written by B. Tomas Astrom and published by Routledge. This book was released on 2018-04-27 with total page 500 pages. Available in PDF, EPUB and Kindle. Book excerpt: The potential application areas for polymer composites are vast. While techniques and methodologies for composites design are relatively well established, the knowledge and understanding of post-design issues lag far behind. This leads to designs and eventually composites with disappointing properties and unnecessarily high cost, thus impeding a wider industrial acceptance of polymer composites. Manufacturing of Polymer Composites completely covers pre- and post-design issues. While the book enables students to become fully comfortable with composites as a possible materials choice, it also provides sufficient knowledge about manufacturing-related issues to permit them to avoid common pitfalls and unmanufacturable designs. The book is a fully comprehensive text covering all commercially significant materials and manufacturing techniques while at the same time discussing areas of research and development that are nearing commercial reality.

Download or read book Drilling of Polymer Matrix Composites written by Vijayan Krishnaraj and published by Springer Science & Business Media. This book was released on 2013-07-08 with total page 110 pages. Available in PDF, EPUB and Kindle. Book excerpt: This brief focus on drilling of polymer matrix composites for aerospace and defence applications. It gives an introduction to machining of polymer composites and discusses drilling as a processing of composites.

Download or read book Machining of Ceramics and Composites written by Jahanmir and published by CRC Press. This book was released on 1999-01-04 with total page 728 pages. Available in PDF, EPUB and Kindle. Book excerpt: Presenting modern advances in the machining of ceramics and composites, this work offers broadly based, fundamental information for selecting the appropriate machining processes and parameters, developing successful manufacturing strategies, and designing novel machining systems. It focuses on scientific and engineering developments affecting the present and future of machining processes.

Download or read book Advances in Machining of Composite Materials written by Islam Shyha and published by Springer Nature. This book was released on 2021-06-21 with total page 547 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book covers a wide range of conventional and non-conventional machining processes of various composite materials, including polymer and metallic-based composites, nanostructured composites and green/natural composites. It presents state-of-the-art academic work and industrial developments in material fabrication, machining, modelling and applications, together with current practices and requirements for producing high-quality composite components. There are also dedicated chapters on physical properties and fabrication techniques of different composite material groups. The book also has chapters on health and safety considerations when machining composite materials and recycling composite materials. The contributors present machining composite materials in terms of operating conditions; cutting tools; appropriate machines; and typical damage patterns following machining operations. This book serves as a useful reference for manufacturing engineers, production supervisors, tooling engineers, planning and application engineers, and machine tool designers. It can also benefit final-year undergraduate and postgraduate students, as it provides comprehensive information on the machining of composite materials to produce high-quality final components. The book chapters were authored by experienced academics and researchers from four continents and nine countries including Canada, China, Egypt, India, Malaysia, Portugal, Singapore, United Kingdom and the USA.

Download or read book Primary and Secondary Manufacturing of Polymer Matrix Composites written by Kishore Debnath and published by CRC Press. This book was released on 2017-09-18 with total page 252 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book offers an insight into the primary and secondary manufacturing of different class of polymer matrix composites (PMCs). The major focus is on the fabrication of a variety of PMCs with substantial coverage of various processing techniques and related advantages and limitations. The book also describes secondary manufacturing processes such as machining and joining of PMCs and provides the know-how related to developing these techniques. It discusses recently commercialized tools and techniques and highlights the opportunities provided by the design and development of newer cutting tools and machining methods. The book covers material selection guidelines, product manufacturability, product development process, and cost-estimating techniques that help readers to understand where a process fits within the overall scheme and which is appropriate for a particular component. This book provides professionals with valuable information related to composites product manufacturing as well as state-of-the-art knowledge in this field.

Download or read book Machinability of Fibre Reinforced Plastics written by J. Paulo Davim and published by Walter de Gruyter GmbH & Co KG. This book was released on 2015-06-16 with total page 209 pages. Available in PDF, EPUB and Kindle. Book excerpt: Presents polymer-based fibre reinforced composite materials and addresses the characteristics of these widely used materials like low density and coefficient of thermal expansion, specific strength with better fatigue resistance and modulus. The topics discussed are laser-based material machining, high-speed robotic end milling and LFRP modeling, including definitions, features, machine elements (system set-up) as well as experimental and theoretical investigations. These investigations include effects of input variables (tool rotation speed, feed rate and ultrasonic power) on cutting force, torque, cutting temperature, edge quality, surface roughness, burning of machined surface, tool wear, material removal rate, power consumption and feasible regions. Further a detailed literature review on drilling polymer composites with a focus on delamination is included. Aspects such as delamination mechanisms, fabrication methods, the type of drilling process adopted by various researchers, cutting parameters employed during drilling, mathematical delamination modelling, effect of thrust force, spindle speed, thermal loads, tool wear, surface roughness, tool geometry and tool materials on delamination and hole quality are summarized. In addition an approach of digital image processing in delamination assessment completes the approach. - Discusses Carbon Fiber Reinforced Plastics modern technologies for automated, highly productive and cost efficient processing. - Great value for final undergraduate engineering courses or as a topic on manufacturing with FRPs at the postgraduate level as well as a useful reference for academics, researchers, manufacturing, mechanical and materials engineers, professionals in machining of FRPs and related industries.

Download or read book Manufacturing of Natural Fibre Reinforced Polymer Composites written by Mohd Sapuan Salit and published by Springer. This book was released on 2015-09-10 with total page 393 pages. Available in PDF, EPUB and Kindle. Book excerpt: Natural fibre composite is an emerging material that has great potential to be used in engineering application. Oil palm, sugar palm, bagasse, coir, banana stem, hemp, jute, sisal, kenaf, roselle, rice husk, betul nut husk and cocoa pod are among the natural fibres reported to be used as reinforcing materials in polymer composites. Natural fibre composites were used in many industries such as automotive, building, furniture, marine and aerospace industries. The advantages of natural fibre composites include low cost, renewable, abundance, light weight, less abrasive and they are suitable to be used in semi or non-structural engineering components. Research on various aspects of natural fibre composites such as characterization, determination of properties and design have been extensively carried out. However, publications that reported on research of manufacture of natural fibre composites are very limited. Specifically, although manufacturing methods of components from natural fibre composites are similar to those of components from conventional fibre composites such as glass, carbon and Kevlar fibres, modification of equipment used for conventional fibre composites may be required. This book fills the gap of knowledge in the field of natural fibre composites for the research community. Among the methods reported that are being used to produce components from natural fibre composites include hand lay-up, compression moulding, filament winding, injection moulding, resin transfer moulding, pultrusion and vacuum bag moulding. This book is also intended to address some research on secondary processing such as machining and laser welding of natural fibre composites. It is hoped that publication of this book will provide the readers new knowledge and understanding on the manufacture of natural fibre composites.

Download or read book Machining Composites Materials written by J. Paulo Davim and published by John Wiley & Sons. This book was released on 2013-10-28 with total page 262 pages. Available in PDF, EPUB and Kindle. Book excerpt: In recent years, the application of composite materials hasincreased in various areas of science and technology due to theirspecial properties, namely for use in the aircraft, automotive,defence, aerospace and other advanced industries. Machiningcomposite materials is quite a complex task owing to itsheterogenity, and to the fact that reinforcements are extremelyabrasive. In modern engineering, high demands are placed oncomponents made of composites in relation to their dimensionalprecision as well as their surface quality. Due to these potentialapplications, there is a great need to understand the questionsassociated with machining composite materials. This book aims to provide the fundamentals and the recentadvances in the machining of composite materials (polymers, metalsand ceramics) for modern manufacturing engineering. The three partsof the book cover the machining of polymeric, metal and ceramicmatrix composites. This book can be used as a text book for the final year of anundergraduate engineering course or for those studyingmachining/composites at the postgraduate level. It can also serveas a useful work of reference for academics, manufacturing andmaterials researchers, manufacturing and mechanical engineers, andprofessionals in composite technology and related industries.

Download or read book Glass Fibre Reinforced Polymer Composites written by Jalumedi Babu and published by Walter de Gruyter GmbH & Co KG. This book was released on 2020-05-05 with total page 125 pages. Available in PDF, EPUB and Kindle. Book excerpt: Composite materials are engineered materials, made from two or more constituents with significantly different physical or chemical properties which remain separate on a macroscopic level within the finished structure. Due to their special mechanical and physical properties they have the potential to replace conventional materials.

Download or read book Forming and Machining of Polymers Ceramics and Composites written by Matruprasad Rout and published by CRC Press. This book was released on 2024-11-04 with total page 269 pages. Available in PDF, EPUB and Kindle. Book excerpt: Forming and Machining of Polymers, Ceramics, and Composites targets the two important manufacturing processes where plastic deformation is involved to give the required shape and size to the raw material. The main goal of the book is to represent the recent developments in the field of forming and machining of different non-metals, especially polymers, composites, and ceramics. Special focus is on the advancement of these processes to manufacture components from these non-metals. Presents exclusive material dedicated to forming and machining of non-metals, that is, polymers, ceramics, and composites Provides comprehensive coverage of all important topics related to non-metals processing Covers basics and current research in the field of forming and machining of non-metals Focuses on sustainability interventions and intelligent manufacturing techniques for quality and productivity in forming and machining of non-metals Discusses conventional and non-conventional machining and microfabrication aspects for fabrication and processing of non-metals This book is aimed at graduate students and researchers in materials processing and machine design.

Download or read book Manufacturing and Processing of Natural Filler Based Polymer Composites written by Jagadish and published by Springer Nature. This book was released on 2021-01-04 with total page 109 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book covers manufacturing and processing of various natural filler-based polymer composites using conventional and advanced machining processes. It presents various experimental case studies conducted by the authors on conventional and advanced machining processes of various natural filler (jute, hemp, banana stem and sisal)-based polymer composites materials. The authors report on the effects of machining processes on the machining properties, such as material removal rate, surface quality, geometric accuracy, process tine and environment while machining various materials.

Download or read book Polymer Matrix Composites and Technology written by Ru-Min Wang and published by Elsevier. This book was released on 2011-07-14 with total page 570 pages. Available in PDF, EPUB and Kindle. Book excerpt: Given such properties as low density and high strength, polymer matrix composites have become a widely used material in the aerospace and other industries. Polymer matrix composites and technology provides a helpful overview of these materials, their processing and performance.After an introductory chapter, part one reviews the main reinforcement and matrix materials used as well as the nature of the interface between them. Part two discusses forming and molding technologies for polymer matrix composites. The final part of the book covers key aspects of performance, including tensile, compression, shear and bending properties as well as impact, fatigue and creep behaviour.Polymer matrix composites and technology provides both students and those in industry with a valuable introduction to and overview of this important class of materials. Provides a helpful overview of these materials, their processing and performance incorporating naming and classification of composite materials Reviews the main reinforcement and matrix materials used as well as the nature of the interface between them including damage mechanisms Discusses forming and molding technologies for polymer matrix composites outlining various techniques and technologies

Download or read book Machining of Polymer Matrix Composites written by and published by . This book was released on 2009 with total page pages. Available in PDF, EPUB and Kindle. Book excerpt:

Download or read book Composite Materials and Processing written by M. Balasubramanian and published by CRC Press. This book was released on 2013-10-04 with total page 648 pages. Available in PDF, EPUB and Kindle. Book excerpt: Composite Materials and Processing provides the science and technology of processing several composites using different processing methods, and includes collective information on the processing of common and advanced composite materials. It also weighs the advantages and disadvantages of various processing methods. This book is suitable for materia

Download or read book Fabrication and Machining of Advanced Materials and Composites written by Subhash Singh and published by CRC Press. This book was released on 2022-10-21 with total page 228 pages. Available in PDF, EPUB and Kindle. Book excerpt: This reference text discusses processing, structure, and properties of metal matrix composites, polymer matrix composites, and ceramic matrix composites for applications in high end engineering equipment, biomedical and nano-biotechnology areas. The text begins by discussing fundamentals, classification, designing and fabrication of composite materials, followed by ultrasonic vibration assisted machining of advanced materials, fabrication of transparent advanced composites, fabrication of composites via microwave sintering, and hybrid machining of metal-matrix composites. It covers important topics including fabrication of shape-memory polymers, additive manufacturing for the fabrication of composites, 3D printing processes for biomedical applications, and ultrasonic vibration assisted machining of advanced materials. The text will be useful for undergraduate, graduate students, and academic researchers in areas including materials science, mechanical engineering, manufacturing science, aerospace engineering, electronics and communication engineering The book- Covers processing, structure, and properties of metal matrix composites, polymer matrix composites, and ceramic matrix composites. Discusses nano materials and their potential applications in the area of biomedical and nano-biotechnology. Provides modern processing techniques to synthesize advance materials. Explores applicability of the materials using mechanical, chemical, thermal and electrical tests. Discussing advanced materials, their manufacturing techniques and applications in diverse areas including automotive, aerospace engineering, biomedical, this text will be useful for undergraduate, graduate students, and academic researchers in areas including materials science, mechanical engineering, manufacturing science, aerospace engineering, electronics and communication engineering. It will further discuss electro discharge machining of steels using chromium alloy-based electrodes, and advanced machining techniques for hard materials.