Download or read book Machining Impossible Shapes written by Gustav J. Olling and published by Springer. This book was released on 2013-03-20 with total page 390 pages. Available in PDF, EPUB and Kindle. Book excerpt: On November 9-11, 1998,85 participants, representing 17 countries, gathered in Aubum Hills, Michigan, at the Chrysler Tech Center, to attend a workshop "SSM'98" (or Sculptured Surface Machining '98) organized by IFIP Working Group 5.3. This was the first major workshop on sculptured surface machining since the CAM-I sponsored conference "Machining Impossible Surfaces" held in 1981. The purpose of the SSM'98 workshop, entitled "Machining Impossible Shapes", was to promote a cross-fertilization of ideas among three communities: industrial users, CAM software developers and academic researchers. There were 17 participants who were "industrial users", 15 represented CAM software developers, 4 were from the machine tool industry, with the remainder being academic researchers. The format of the meeting included 40 presentations in 9 sessions, 4 keynote speeches and a sufficient amount of time for informal discussion amongst the participants. One of the most valuable aspects of the workshop was the opportunity for participants to meet informally and to discuss their mutual interests. This led to two "participant organized" sessions on five axis machining and on machine tool controllers.
Download or read book Machining Impossible Shapes written by Gustav J. Olling and published by . This book was released on 2014-01-15 with total page 400 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Kinematic Geometry of Surface Machining written by Stephen P. Radzevich and published by CRC Press. This book was released on 2007-12-14 with total page 538 pages. Available in PDF, EPUB and Kindle. Book excerpt: The principle of Occam's razor loosely translates tothe simplest solution is often the best. The author of Kinematic Geometry of Surface Machining utilizes this reductionist philosophy to provide a solution to the highly inefficient process of machining sculptured parts on multi-axis NC machines. He has developed a method to quickly calcu
Download or read book CAD CAM of Sculptured Surfaces on Multi Axis NC Machine written by Stephen Radzevich and published by Springer Nature. This book was released on 2022-05-31 with total page 113 pages. Available in PDF, EPUB and Kindle. Book excerpt: Many products are designed with aesthetic sculptured surfaces to enhance their appearance, an important factor in customer satisfaction, especially for automotive and consumer electronics products. In other cases, products have sculptured surfaces to meet functional requirements. Functional surfaces interact with the environment or with other surfaces. Because of this, functional surfaces can also be called dynamic surfaces. Functional surfaces do not possess the property to slide over itself, which causes significant complexity in machining of sculptured surfaces. The application of multiaxis numerically controlled (NC) machines is the only way for an efficient machining of sculptured surfaces. Reduction of machining time is a critical issue when machining sculptured surfaces on multiaxis NC machines. To reduce the machining cost of a sculptured surface, the machining time must be as short as possible. Table of Contents: Introduction / Analytical Representation of Scupltured Surfaces / Kinematics of Sculptured-Surface Machining / Analytical Description of the Geometry of Contact of the Sculptured Surface and of the Generating Surface of the Form-Cutting Tool / Form-Cutting Tools of Optimal Design / Conditions of Proper Sculptured-Surface Generation / Predicted Accuracy of the Machined Sculptured Surface / Optimal Sculptured-Surface Machining
Download or read book Advances in Mechanism Machine Science and Engineering in China written by Xinjun Liu and published by Springer Nature. This book was released on 2023-05-31 with total page 2228 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book presents the conference proceedings of the 23rd IFToMM China International Conference on Mechanism and Machine Science & Engineering (IFToMM CCMMS 2022). CCMMS was initiated in 1982, and it is the most important forum held in China for the exchange of research ideas, presentation of technical and scientific achievements, and discussion of future directions in the field of mechanism and machine science. The topics include parallel/hybrid mechanism synthesis and analysis, theoretical & computational kinematics, compliant mechanisms and micro/nano-mechanisms, reconfigurable and metamorphic mechanisms, space structures, mechanisms and materials, structure adaptation in space environment and ground testing, large-scale membrane deployable structures, construction and application of super-scale space systems, cams, gears and combining mechanisms, fluid power mechatronics drivetrain, mechanical design theory and methods, dynamics and vibration control, mechatronics, biologically inspired mechanisms and robotics, medical & rehabilitation robotics, mobile robotics, soft robotics, heavy non-road mobile machine, robot applications, engineering education on mechanisms, machines, and robotics. This book provides a state-of-the-art overview of current advances in mechanism and machine science in China. The inspiring ideas presented in the papers enlighten academic research and industrial application. The potential readers include academic researchers and industrial professionals in mechanism and machine science.
Download or read book Generation of Surfaces written by Stephen P. Radzevich and published by CRC Press. This book was released on 2014-02-03 with total page 740 pages. Available in PDF, EPUB and Kindle. Book excerpt: A commonly used practice in industry is the machining of sculptured part surfaces on a multiaxis numerical control (NC) machine. While this practice is vital, it is also a costly aspect of the surface generation process. After investing more than 40 years of research into the theory of part surface generation, the author of Generation of Surfaces: Kinematic Geometry of Surface Machining considers an approach that provides optimal machining while factoring in the lowest possible cost. This book presents the modern theory of part surface generation with a focus on kinematic geometry of part surface machining on a multiaxis (NC) machine, and introduces key methods for applying the DG/K-based approach to part surface generation. The DG/K approach is based on the results of research found in two main areas: differential geometry (DG) of surfaces, and kinematics (K) of rigid body in three-dimensional Euclidian space E3. It is an extremely powerful tool for solving a plurality of problems in mechanical/manufacturing engineering. The text is presented in three parts: the basics, the fundamentals, and applications of part surface generation. The first part of the book provides an analytical description of part surfaces, details the principal elements of the theory of multiparametric motion of a rigid body in E3 space, and defines applied coordinate systems. The second half introduces the theory of part surface generation, and includes an analytical description of contact geometry, while the final portion illustrates the potential development of highly effective part surface generation methods. The author illustrates the most complex features of the book with examples, explains all of the results of analysis mathematically, and uses just one set of input parameters—the design parameters of the part surface to be machined. The book considers practical applications for part surface machining and cutting tool design. Developed for use with computer-aided design (CAD) and computer-aided machining (CAM), this text is useful for anyone starting work on new software packages for sculptured part surface machining on a multiaxis NC machine.
Download or read book Feature Based Product Life Cycle Modelling written by René Soenen and published by Springer. This book was released on 2013-04-17 with total page 192 pages. Available in PDF, EPUB and Kindle. Book excerpt: Feature-based technology is the key factor towards meeting the increasingly high demands of improving and speeding up the product development process from concept to customer feedback, and is therefore expected to be able to provide for a better approach to integrate the complete product design process chain. Feature Based Product Life-Cycle Modelling is dedicated to exploring the progress towards an integrated solution for the product creation process based on feature technology. Hence, it encompasses significant phases of the product creation process, from conceptual design to recycling, including the following topics: *Life-phases modelling; *Knowledge based engineering; *Multiple-view geometric modelling; *Technological links among assemblies; *Manufacturing process cost estimation; *Manufacturing modelling; *Machining preparation; *Product deterioration prediction; *Product recovery estimation. For each topic, a state of the art, theoretic bases, tentative solutions and illustrative examples are detailed, demonstrating the successful application of feature technology to the modelling of innovative products and the efficient control of their design. The book is a selection of proceedings from the International Conference on Feature Modelling in Advanced Design-for-the-Life-Cycle Systems (FEATS 2001), which was sponsored by the International Federation for Information Processing (IFIP) and held in Valenciennes, France in June 2001.
Download or read book Three Dimensional Machine Vision written by Takeo Kanade and published by Springer Science & Business Media. This book was released on 2012-12-06 with total page 609 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Geometric and Algorithmic Aspects of Computer aided Design and Manufacturing written by Ravi Janardan and published by American Mathematical Soc.. This book was released on with total page 372 pages. Available in PDF, EPUB and Kindle. Book excerpt: Computer-Aided Design and Manufacturing (CAD/CAM) is concerned with all aspects of the process of designing, prototyping, manufacturing, inspecting, and maintaining complex geometric objects under computer control. As such, there is a natural synergy between this field and Computational Geometry (CG), which involves the design, analysis, implementation, and testing of efficient algorithms and data representation techniques for geometric entities such as points, polygons, polyhedra, curves, and surfaces. The DIMACS Center (Piscataway, NJ) sponsored a workshop to further promote the interaction between these two fields. Attendees from academia, research laboratories, and industry took part in the invited talks, contributed presentations, and informal discussions. This volume is an outgrowth of that meeting.
Download or read book Making Your CAM Journey Easier with Fusion 360 written by Fabrizio Cimo and published by Packt Publishing Ltd. This book was released on 2023-03-17 with total page 464 pages. Available in PDF, EPUB and Kindle. Book excerpt: Turn your design ideas into 3D models using Fusion 360 by honing your design skills and learning the best practices of common production technologies Purchase of the print or Kindle book includes a free PDF eBook Key FeaturesGet familiar with Fusion 360 CAM Module and its machining potential with hands-on exercisesExplore major production technologies like turning, milling, laser cutting, and additive manufacturingLearn how to setup your program and simulate stock removalBook Description Downloading a piece of 3D software and shaping concepts and ideas is quite easy. However, designing feasible and cost-effective real parts from 3D models can be challenging with traditional production technologies, or even additive manufacturing. This book will give you the know-how and skills to develop your projects from ideas to physical products, and overcome these obstacles. In 'Making Your CAM Journey Easier with Fusion 360', you'll discover how to set up a CAM program, pick the right tool, and optimize production. You'll learn the pros and cons of different production technologies, including turning, milling, laser cutting, and 3D printing, and understand how to choose the best option based on your needs. You'll also explore the important computer-aided manufacturing tools that Fusion 360 offers through the use of examples and best practices. By the end of this book, you'll understand the potential issues and drawbacks of different design components and apply workarounds to avoid design flaws. What you will learnChoose the best approach for different parts and shapesAvoid design flaws from a manufacturing perspectiveDiscover the different machining strategiesUnderstand how different tool geometries can influence machining resultsDiscover how to check the tool simulation for errorsUnderstand possible fixtures for raw material blocksBecome proficient in optimizing parameters for your machineExplore machining theory and formulas to evaluate cutting parametersWho this book is for This book is for 3D enthusiasts or mechanical designers looking to turn their design ideas into 3D models, and their 3D models into final products. Familiarity with any CAD software or Fusion 360 design module is recommended; the book will then teach you the rest.
Download or read book Advances in Machine Vision written by Jorge L.C. Sanz and published by Springer Science & Business Media. This book was released on 2012-12-06 with total page 432 pages. Available in PDF, EPUB and Kindle. Book excerpt: Machine Vision technology is becoming an indispensible part of the manufacturing industry. Biomedical and scientific applications of machine vision and imaging are becoming more and more sophisticated, and new applications continue to emerge. This book gives an overview of ongoing research in machine vision and presents the key issues of scientific and practical interest. A selected board of experts from the US, Japan and Europe provides an insight into some of the latest work done on machine vision systems and appliccations.
Download or read book Freeform Surface Machining in Networked Rapid Prototyping written by Ganping Sun and published by . This book was released on 2000 with total page 396 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Engineering Production written by and published by . This book was released on 1921 with total page 882 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Handbook of Machine Shop Management written by John Herbert Van Deventer and published by . This book was released on 1915 with total page 390 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Inland Printer American Lithographer written by and published by . This book was released on 1920 with total page 982 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book The Inland Printer written by and published by . This book was released on 1920 with total page 972 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Proceedings of the ASME Design Engineering Technical Conferences written by and published by . This book was released on 2007 with total page 1008 pages. Available in PDF, EPUB and Kindle. Book excerpt:
