Download or read book Machining Technology for Composite Materials written by H Hocheng and published by Elsevier. This book was released on 2011-11-28 with total page 488 pages. Available in PDF, EPUB and Kindle. Book excerpt: Machining processes play an important role in the manufacture of a wide variety of components. While the processes required for metal components are well-established, they cannot always be applied to composite materials, which instead require new and innovative techniques. Machining technology for composite materials provides an extensive overview and analysis of both traditional and non-traditional methods of machining for different composite materials.The traditional methods of turning, drilling and grinding are discussed in part one, which also contains chapters analysing cutting forces, tool wear and surface quality. Part two covers non-traditional methods for machining composite materials, including electrical discharge and laser machining, among others. Finally, part three contains chapters that deal with special topics in machining processes for composite materials, such as cryogenic machining and processes for wood-based composites.With its renowned editor and distinguished team of international contributors, Machining technology for composite materials is an essential reference particularly for process designers and tool and production engineers in the field of composite manufacturing, but also for all those involved in the fabrication and assembly of composite structures, including the aerospace, marine, civil and leisure industry sectors. - Provides an extensive overview of machining methods for composite materials - Chapters analyse cutting forces, tool wear and surface quality - Cryogenic machining and processes for wood based composites are discussed

Download or read book Advances in Machining of Composite Materials written by Islam Shyha and published by Springer Nature. This book was released on 2021-06-21 with total page 547 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book covers a wide range of conventional and non-conventional machining processes of various composite materials, including polymer and metallic-based composites, nanostructured composites and green/natural composites. It presents state-of-the-art academic work and industrial developments in material fabrication, machining, modelling and applications, together with current practices and requirements for producing high-quality composite components. There are also dedicated chapters on physical properties and fabrication techniques of different composite material groups. The book also has chapters on health and safety considerations when machining composite materials and recycling composite materials. The contributors present machining composite materials in terms of operating conditions; cutting tools; appropriate machines; and typical damage patterns following machining operations. This book serves as a useful reference for manufacturing engineers, production supervisors, tooling engineers, planning and application engineers, and machine tool designers. It can also benefit final-year undergraduate and postgraduate students, as it provides comprehensive information on the machining of composite materials to produce high-quality final components. The book chapters were authored by experienced academics and researchers from four continents and nine countries including Canada, China, Egypt, India, Malaysia, Portugal, Singapore, United Kingdom and the USA.

Download or read book Machining of Polymer Composites written by Jamal Ahmad and published by Springer Science & Business Media. This book was released on 2009-04-21 with total page 321 pages. Available in PDF, EPUB and Kindle. Book excerpt: This excellent volume will serve as an indispensable reference and source book for process design, tool and production engineers in composite manufacturing. It provides the reader with a comprehensive treatment of the theory of machining as it applies to fiber reinforced polymer composites. It covers the latest technical advances in the area of machining and tooling, and discusses the applications of fiber reinforced polymer composites in the aircraft and automotive industries.

Download or read book Machining of Ceramics and Composites written by Jahanmir and published by CRC Press. This book was released on 1999-01-04 with total page 728 pages. Available in PDF, EPUB and Kindle. Book excerpt: Presenting modern advances in the machining of ceramics and composites, this work offers broadly based, fundamental information for selecting the appropriate machining processes and parameters, developing successful manufacturing strategies, and designing novel machining systems. It focuses on scientific and engineering developments affecting the present and future of machining processes.

Download or read book Machining of Metal Matrix Composites written by J. Paulo Davim and published by Springer Science & Business Media. This book was released on 2011-09-18 with total page 170 pages. Available in PDF, EPUB and Kindle. Book excerpt: Machining of Metal Matrix Composites provides the fundamentals and recent advances in the study of machining of metal matrix composites (MMCs). Each chapter is written by an international expert in this important field of research. Machining of Metal Matrix Composites gives the reader information on machining of MMCs with a special emphasis on aluminium matrix composites. Chapter 1 provides the mechanics and modelling of chip formation for traditional machining processes. Chapter 2 is dedicated to surface integrity when machining MMCs. Chapter 3 describes the machinability aspects of MMCs. Chapter 4 contains information on traditional machining processes and Chapter 5 is dedicated to the grinding of MMCs. Chapter 6 describes the dry cutting of MMCs with SiC particulate reinforcement. Finally, Chapter 7 is dedicated to computational methods and optimization in the machining of MMCs. Machining of Metal Matrix Composites can serve as a useful reference for academics, manufacturing and materials researchers, manufacturing and mechanical engineers, and professionals involved with MMC applications. It can also be used to teach modern manufacturing engineering or as a textbook for advanced undergraduate and postgraduate engineering courses in machining, manufacturing or materials.

Download or read book Machining Difficult to Cut Materials written by Hossam A. Kishawy and published by Springer. This book was released on 2018-08-09 with total page 253 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book focus on the challenges faced by cutting materials with superior mechanical and chemical characteristics, such as hardened steels, titanium alloys, super alloys, ceramics and metal matrix composites. Aspects such as costs and appropriate machining strategy are mentioned. The authors present the characteristics of the materials difficult to cut and comment on appropriate cutting tools for their machining. This book also serves as a reference tool for manufacturers working in industry.

Download or read book Machining and Machinability of Fiber Reinforced Polymer Composites written by Mohamed Thariq Hameed Sultan and published by Springer Nature. This book was released on 2020-12-22 with total page 346 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book covers current advances and practices in machining fibre-reinforced polymer composites under various conventional and nonconventional processes. It presents recent research and practices for effective and efficient machining of difficult-to-cut material, providing the technological ‘know-how’ on delamination-free of drilling, milling, trimming, and other cutting processes on fibre-reinforced polymer composites. It also guides the reader on the selection of optimum machining parameters, tool materials, as well as tool geometry. This book is of interest to academicians, students, researchers, practitioners, and industrialists working in aerospace, automotive, marine, and construction industries.

Download or read book Advanced Manufacturing Techniques for Engineering and Engineered Materials written by Thanigaivelan, R. and published by IGI Global. This book was released on 2022-03-11 with total page 351 pages. Available in PDF, EPUB and Kindle. Book excerpt: As technology advances, it is imperative to stay current in the newest developments made within the engineering industry and within material sciences. Trends in manufacturing such as 3D printing, casting, welding, surface modification, computer numerical control (CNC), non-traditional, Industry 4.0 ergonomics, and hybrid machining methods must be closely examined to utilize these important resources for the betterment of society. Advanced Manufacturing Techniques for Engineering and Engineered Materials provides a unified and complete overview about the recent and emerging trends, developments, and associated technology with scope for the commercialization of techniques specific to manufacturing materials. This book also reviews the various machining methods for difficult-to-cut materials and novel materials including matrix composites. Covering topics such as agro-waste, conventional machining, and material performance, this book is an essential resource for researchers, engineers, technologists, students and professors of higher education, industry workers, entrepreneurs, researchers, and academicians.

Download or read book Structural Composite Materials written by F. C. Campbell and published by ASM International. This book was released on 2010-01-01 with total page 622 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book deals with all aspects of advanced composite materials; what they are, where they are used, how they are made, their properties, how they are designed and analyzed, and how they perform in-service. It covers both continuous and discontinuous fiber composites fabricated from polymer, metal, and ceramic matrices, with an emphasis on continuous fiber polymer matrix composites.

Download or read book Machining of Nanocomposites written by Ramesh Kumar Nayak and published by CRC Press. This book was released on 2022-03-22 with total page 220 pages. Available in PDF, EPUB and Kindle. Book excerpt: Nanocomposites (both heterogeneous and anisotropic) are hard to machine due to their enhanced properties and there is a need to know about the problems associated with the machining of nanocomposites by various conventional as well as non-conventional machining operations. Machining of nanocomposites emphasizes on different fabrication methods to develop nanocomposites (polymers, metals, and ceramics) and different machining processes used in industries. Further, it describes issues and challenges including research trends associated with the same. It also evaluates mechanical and wear properties of the composites as well. Features: Covers manufacturing process of nanocomposites. Includes conventional and non-conventional machining process and relevant applications. Addresses effect of different nano-reinforcements on machinability. Discusses usage of design of experiments and optimization technique to improve the machinability of nanocomposites. Reviews challenges on machining of nanocomposites and its remedies. This book aims at Researchers, Graduate students in Mechanical Engineering, and Materials Sciences including Composites, Nanotechnology, and Machining.

Download or read book Machinability of Fibre Reinforced Plastics written by J. Paulo Davim and published by Walter de Gruyter GmbH & Co KG. This book was released on 2015-06-16 with total page 209 pages. Available in PDF, EPUB and Kindle. Book excerpt: Presents polymer-based fibre reinforced composite materials and addresses the characteristics of these widely used materials like low density and coefficient of thermal expansion, specific strength with better fatigue resistance and modulus. The topics discussed are laser-based material machining, high-speed robotic end milling and LFRP modeling, including definitions, features, machine elements (system set-up) as well as experimental and theoretical investigations. These investigations include effects of input variables (tool rotation speed, feed rate and ultrasonic power) on cutting force, torque, cutting temperature, edge quality, surface roughness, burning of machined surface, tool wear, material removal rate, power consumption and feasible regions. Further a detailed literature review on drilling polymer composites with a focus on delamination is included. Aspects such as delamination mechanisms, fabrication methods, the type of drilling process adopted by various researchers, cutting parameters employed during drilling, mathematical delamination modelling, effect of thrust force, spindle speed, thermal loads, tool wear, surface roughness, tool geometry and tool materials on delamination and hole quality are summarized. In addition an approach of digital image processing in delamination assessment completes the approach. - Discusses Carbon Fiber Reinforced Plastics modern technologies for automated, highly productive and cost efficient processing. - Great value for final undergraduate engineering courses or as a topic on manufacturing with FRPs at the postgraduate level as well as a useful reference for academics, researchers, manufacturing, mechanical and materials engineers, professionals in machining of FRPs and related industries.

Download or read book Drilling of Composite Materials written by J. Paulo Davim and published by . This book was released on 2009 with total page 0 pages. Available in PDF, EPUB and Kindle. Book excerpt: Nowadays, the use of composite materials has increased in various areas of science and technology due to their special properties, namely for these application in aircraft, automotive, defence and aerospace industries as well others advanced industries. Drilling is a frequently practised machining process in modern industry owing to the need for component assembly in composite structures. This book aims to provide the research and review studies in drilling of composite materials. The first three chapters provide information on delamination and damage reduction in drilling of composite materials. The following two chapters deal with influence of machining parameters on the delamination. The sixth chapter is focused on modelling of drilling aluminium matrix composites using artificial neural networks. The chapter seventh is dedicated study of analysis of delamination in drilling wood composite medium density fibreboards. Finally, the last chapter of this book is focused on studies on composite drilling - the state of the art. The present research book can be used as for final undergraduate engineering course (for example, mechanical, manufacturing, materials etc) or as a subject on machining/composites at the postgraduate level. Also, this research book can serve as a useful reference for academics, manufacturing and materials researchers, manufacturing, materials and mechanical engineers, professional in composites technology and related industries.

Download or read book Machining Composites Materials written by J. Paulo Davim and published by John Wiley & Sons. This book was released on 2013-10-28 with total page 262 pages. Available in PDF, EPUB and Kindle. Book excerpt: In recent years, the application of composite materials hasincreased in various areas of science and technology due to theirspecial properties, namely for use in the aircraft, automotive,defence, aerospace and other advanced industries. Machiningcomposite materials is quite a complex task owing to itsheterogenity, and to the fact that reinforcements are extremelyabrasive. In modern engineering, high demands are placed oncomponents made of composites in relation to their dimensionalprecision as well as their surface quality. Due to these potentialapplications, there is a great need to understand the questionsassociated with machining composite materials. This book aims to provide the fundamentals and the recentadvances in the machining of composite materials (polymers, metalsand ceramics) for modern manufacturing engineering. The three partsof the book cover the machining of polymeric, metal and ceramicmatrix composites. This book can be used as a text book for the final year of anundergraduate engineering course or for those studyingmachining/composites at the postgraduate level. It can also serveas a useful work of reference for academics, manufacturing andmaterials researchers, manufacturing and mechanical engineers, andprofessionals in composite technology and related industries.

Download or read book Composites Manufacturing written by Sanjay Mazumdar and published by CRC Press. This book was released on 2001-12-27 with total page 417 pages. Available in PDF, EPUB and Kindle. Book excerpt: More and more companies manufacture reinforced composite products. To meet the market need, researchers and industries are developing manufacturing methods without a reference that thoroughly covers the manufacturing guidelines. Composites Manufacturing: Materials, Product, and Process Engineering fills this void. The author presents a fundamental

Download or read book Glass Fibre Reinforced Polymer Composites written by Jalumedi Babu and published by Walter de Gruyter GmbH & Co KG. This book was released on 2020-05-05 with total page 125 pages. Available in PDF, EPUB and Kindle. Book excerpt: Composite materials are engineered materials, made from two or more constituents with significantly different physical or chemical properties which remain separate on a macroscopic level within the finished structure. Due to their special mechanical and physical properties they have the potential to replace conventional materials.

Download or read book Fundamentals of Composites Manufacturing Second Edition written by A. Brent Strong and published by Society of Manufacturing Engineers. This book was released on 2008 with total page 642 pages. Available in PDF, EPUB and Kindle. Book excerpt: Describes advances, key information, case studies, and examples that can broaden your knowledge of composites materials and manufacturing methods. This text deals with composites manufacturing methods, providing tips for getting the best results that weigh the required material properties against cost and production efficiency. An Instructor's Guide is also available.

Download or read book Machinability of Advanced Materials written by J. Paulo Davim and published by John Wiley & Sons. This book was released on 2014-02-19 with total page 318 pages. Available in PDF, EPUB and Kindle. Book excerpt: Machinability of Advanced Materials addresses the level of difficulty involved in machining a material, or multiple materials, with the appropriate tooling and cutting parameters. A variety of factors determine a material’s machinability, including tool life rate, cutting forces and power consumption, surface integrity, limiting rate of metal removal, and chip shape. These topics, among others, and multiple examples comprise this research resource for engineering students, academics, and practitioners.